We study the properties, connectivity, and galaxy content of groups and filaments in the low-density region (cocoon) around A2142 supercluster (SClA2142). We traced the SClA2142 cocoon boundaries by the lowest luminosity-density regions that separate SClA2142 from other superclusters. We determined galaxy filaments and groups in the cocoon and analysed the connectivity of groups, the high density core (HDC) of the supercluster, and the whole of the supercluster. We compared the distribution and properties of galaxies with different star-formation properties in the supercluster and in the cocoon. SClA2142 and the long filament that is connected to it forms the longest straight structure in the Universe detected so far, with a length of $75$ $h^{-1}$ Mpc. The connectivity of the supercluster is C = 6 - 7; poor groups have C = 1 - 2. Long filaments around the supercluster's main body are detached from it at the turnaround region. Galaxies with very old stellar populations lie in systems across a wide range of richness from the richest cluster to poorest groups and single galaxies. They lie even at local densities as low as $D1 < 1$ in the cocoon and up to $D1 > 800$ in the supercluster. Recently quenched galaxies lie in the cocoon mainly in one region and their properties are different in the cocoon and in the supercluster. The star-formation properties of single galaxies are similar across all environments. The collapsing main body of SClA2142 with the detached long filaments near it are evidence of an important epoch in the supercluster evolution. Further studies are needed to understand the reasons of similarity of galaxies with very old stellar populations in extremely different environments. The presence of long, straight structures in the cosmic web may serve as a test for cosmological models.

We determine the mass of the Milky Way bar and the torque it causes, using Gaia DR2, by applying the orbital arc method. Based on this, we have found that the gravitational acceleration is not directed towards the centre of our Galaxy but a few degrees away from it. We propose that the tangential acceleration component is caused by the bar of the Galaxy. Calculations based on our model suggest that the torque experienced by the region around the Sun is $\approx 2400\, km^2 s^{-2}$ per solar mass. The mass estimate for the bar is $\sim 1.6\pm0.3\times10^{10} M_\odot$. Using greatly improved data from Gaia DR2, we have computed the acceleration field to great accuracy by adapting the oPDF method (Han et al. 2016) locally and used the phase space coordinates of $\sim 4\times10^5$ stars within a distance of 0.5 kpc from the Sun. In the orbital arc method, the first step is to guess an acceleration field and then reconstruct the stellar orbits using this acceleration for all the stars within a specified region. Next, the stars are redistributed along orbits to check if the overall phase space distribution has changed. We repeat this process until we find an acceleration field that results in a new phase space distribution that is the same as the one that we started with; we have then recovered the true underlying acceleration.

We study the effect of dynamical friction on globular clusters and on the stars evaporated from the globular clusters (stellar streams) moving in a galactic halo. Due to dynamical friction, the position of a globular cluster (GC) as a stream progenitor starts to shift with respect to its original position in the reference frame of initial GC orbit. Therefore the stars that have evaporated at different times have different mean position with respect to the GC position. This shifting results in a certain asymmetry in stellar density distribution between the leading and trailing arms of the stream. The degree of the asymmetry depends on the characteristics of the environment in which the GC and the stream stars move. As GCs are located mainly in outer parts of a galaxy, this makes dynamical friction a unique probe to constrain the underlying dark matter spatial density and velocity distributions. For a GC NGC 3201 we compared our theoretical shift estimates with available observations. Due to large uncertainties in current observation data, we can only conclude that the derived estimates have the same order of magnitude.

We present a method to calculate gravitational potential gradients within regions containing few tens of thousands stars with known phase space coordinates. The central idea of the method is to calculate orbital arcs for each star within a given region for a certain parametrised potential (gravitational acceleration) and to assume that position of each star on its orbital arc is a random variable with a uniform probability density in time. Thereafter, by combining individual probability densities of stars it is possible to calculate the overall probability density distribution and likelihood for a given region as a function of gravitational acceleration parameters. The likelihood has a maximum if the calculated probability distribution and the observed distribution of stars in phase space are consistent. This allows us to constrain gravitational accelerations and potential gradient values. The method assumes that phases of stars are mixed within the regions where stellar orbits are calculated. We tested the method for 12 small rectangular regions within simulated disc galaxy from Gaia Wiki. Tests show that even with a rather simple acceleration form the calculated accelerations in galactic plane coincide with their true values from simulation about 5 per cent, misalignment between the calculated and true acceleration vector directions is less than 1 degree (median values). The model can be used with the Milky Way Gaia complete solution data.

New and more reliable distances and proper motions of a large number of stars in the Tycho-Gaia Astrometric Solution (TGAS) catalogue allow to calculate the local matter density distribution more precisely than earlier. We devised a method to calculate the stationary gravitational potential distribution perpendicular to the Galactic plane by comparing the vertical probability density distribution of a sample of observed stars with the theoretical probability density distribution computed from their vertical coordinates and velocities. We applied the model to idealised test stars and to the real observational samples. Tests with two mock datasets proved that the method is viable and provides reasonable results. Applying the method to TGAS data we derived that the total matter density in the Solar neighbourhood is $0.09\pm 0.02 \text{M}_\odot\text{pc}^{-3}$ being consistent with the results from literature. The matter surface density within $|z|\le 0.75 \text{kpc}$ is $42\pm 4 \text{M}_\odot\text{pc}^{-2}$. This is slightly less than the results derived by other authors but within errors is consistent with previous estimates. Our results show no firm evidence for significant amount of dark matter in the Solar neighbourhood. However, we caution that our calculations at $|z| \leq 0.75$ kpc rely on an extrapolation from the velocity distribution function calculated at $|z| \leq 25$ pc. This extrapolation can be very sensitive to our assumption that the stellar motions are perfectly decoupled in R and z, and to our assumption of equilibrium. Indeed, we find that $\rho (z)$ within $|z|\le 0.75$ kpc is asymmetric with respect to the Galactic plane at distances $|z| = 0.1-0.4$ kpc indicating that the density distribution may be influenced by density perturbations.

Aims: Density waves are often considered as the triggering mechanism of star formation in spiral galaxies. Our aim is to study relations between different star formation tracers (stellar UV and near-IR radiation and emission from HI, CO and cold dust) in the spiral arms of M31, to calculate stability conditions in the galaxy disc and to draw conclusions about possible star formation triggering mechanisms. Methods: We select fourteen spiral arm segments from the de-projected data maps and compare emission distributions along the cross sections of the segments in different datasets to each other, in order to detect spatial offsets between young stellar populations and the star forming medium. By using the disc stability condition as a function of perturbation wavelength and distance from the galaxy centre we calculate the effective disc stability parameters and the least stable wavelengths at different distances. For this we utilise a mass distribution model of M31 with four disc components (old and young stellar discs, cold and warm gaseous discs) embedded within the external potential of the bulge, the stellar halo and the dark matter halo. Each component is considered to have a realistic finite thickness. Results: No systematic offsets between the observed UV and CO/far-IR emission across the spiral segments are detected. The calculated effective stability parameter has a minimal value Q_{eff} ~ 1.8 at galactocentric distances 12 - 13 kpc. The least stable wavelengths are rather long, with the minimal values starting from ~ 3 kpc at distances R > 11 kpc. Conclusions: The classical density wave theory is not a realistic explanation for the spiral structure of M31. Instead, external causes should be considered, e.g. interactions with massive gas clouds or dwarf companions of M31.

We probe the feasibility of describing the structure of a multi-component axisymmetric galaxy with a dynamical model based on the Jeans equations while taking into account a third integral of motion. We demonstrate that using the third integral in the form derived by G. Kuzmin, it is possible to calculate the stellar kinematics of a galaxy from the Jeans equations by integrating the equations along certain characteristic curves. In cases where the third integral of motion does not describe the system exactly, the derived kinematics would describe the galaxy only approximately. We apply our method to the Andromeda galaxy, for which the mass distribution is relatively firmly known. We are able to reproduce the observed stellar kinematics of the galaxy rather well. The calculated model suggests that the velocity dispersion ratios ${\sigma}_z^2/{\sigma}_R^2$ of M31 decrease with increasing R. Moving away from the galactic plane, ${\sigma}_z^2/{\sigma}_R^2$ remains the same. The velocity dispersions ${\sigma}_{\theta}^2$ and ${\sigma}_R^2$ are roughly equal in the galactic plane.

Because of the 3D nature of galaxies, an algorithm for constructing spatial density distribution models of galaxies on the basis of galaxy images has many advantages over surface density distribution approximations. We present a method for deriving spatial structure and overall parameters of galaxies from images and estimate its accuracy and derived parameter degeneracies on a sample of idealised model galaxies. The test galaxies consist of a disc-like component and a spheroidal component with varying proportions and properties. Both components are assumed to be axially symmetric and coplanar. We simulate these test galaxies as if observed in the SDSS project through ugriz filters, thus gaining a set of realistically imperfect images of galaxies with known intrinsic properties. These artificial SDSS galaxies were thereafter remodelled by approximating the surface brightness distribution with a 2D projection of a bulge+disc spatial distribution model and the restored parameters were compared to the initial ones. Down to the r-band limiting magnitude 18, errors of the restored integral luminosities and colour indices remain within 0.05 mag and errors of the luminosities of individual components within 0.2 mag. Accuracy of the restored bulge-to-disc ratios (B/D) is within 40% in most cases, and becomes worse for galaxies with low B/D, but the general balance between bulges and discs is not shifted systematically. Assuming that the intrinsic disc axial ratio is < 0.3, the inclination angles can be estimated with errors < 5deg for most of the galaxies with B/D < 2 and with errors < 15deg up to B/D = 6. Errors of the recovered sizes of the galactic components are below 10% in most cases. In general, models of disc components are more accurate than models of spheroidal components for geometrical reasons.

Stellar mass distribution in M31 is estimated using optical and infrared imaging data. Combining the derived stellar mass model with various kinematical data, properties of the DM halo of the galaxy are constrained. SDSS observations through the ugriz filters and the Spitzer imaging at 3.6 microns are used to sample the SED of the galaxy at each imaging pixel. Intrinsic dust extinction effects are taken into account by using far-infrared observations. Synthetic SEDs created with different stellar population synthesis models are fitted to the observed SEDs, providing estimates for the stellar mass surface density. The stellar mass distribution of the galaxy is described with a 3D model consisting of a nucleus, a bulge, a disc, a young disc and a halo component, each following the Einasto density distribution (relations between different functional forms of the Einasto density distribution are given in App. B). By comparing the stellar mass distribution to the observed rotation curve and kinematics of outer globular clusters and satellite galaxies, the DM halo parameters are estimated. Stellar population synthesis models suggest that M31 is dominated by old stars throughout the galaxy. The total stellar mass is (10-15)10^10Msun, 30% of which is in the bulge and 56% in the disc. None of the tested DM distribution models can be falsified on the basis of the stellar matter distribution and the rotation curve of the galaxy. The virial mass of the DM halo is (0.8-1.1)10^12Msun and the virial radius is 189-213kpc, depending on the DM distribution. The central density of the DM halo is comparable to that of nearby dwarf galaxies, low-surface-brightness galaxies and distant massive disc galaxies, thus the evolution of central DM halo properties seems to be regulated by similar processes for a broad range of halo masses, environments, and cosmological epochs.

The objective of this work is to obtain an extinction-corrected distribution of optical surface brightness and colour indices of the large nearby galaxy M 31 using homogeneous observational data and a model for intrinsic extinction. We process the Sloan Digital Sky Survey (SDSS) images in ugriz passbands and construct corresponding mosaic images, taking special care of subtracting the varying sky background. We apply the galactic model developed in Tempel et al. (2010) and far-infrared imaging to correct the photometry for intrinsic dust effects. We obtain observed and dust-corrected distributions of the surface brightness of M 31 and a map of line-of-sight extinctions inside the galaxy. Our extinction model suggests that either M 31 is intrinsically non-symmetric along the minor axis or the dust properties differ from those of the Milky Way. Assuming the latter case, we present the surface brightness distributions and integral photometry for the Sloan filters as well as the standard UBVRI system. We find the following intrinsic integral colour indices for M 31: (U-B)_0=0.35; (B-V)_0=0.86; (V-R)_0=0.63; (R-I)_0=0.53; the total intrinsic absorption-corrected luminosities of M 31 in the B and the V filters are 4.10 and 3.24 mag, respectively.

We create a model for recovering the intrinsic, absorption-corrected surface brightness distribution of a galaxy and apply the model to the M31. We construct a galactic model as a superposition of axially symmetric stellar components and a dust disc to analyse the intrinsic absorption efects. Dust column density is assumed to be proportional to the far-infrared flux of the galaxy. Along each line of sight, the observed far-infrared spectral energy distribution is approximated with modified black body functions considering dust components with different temperatures, allowing to determine the temperatures and relative column densities of the dust components. We apply the model to the nearby galaxy M31 using the Spitzer Space Telescope far-infrared observations for mapping dust distribution and temperature. A warm and a cold dust component are distinguished. The temperature of the warm dust in M31 varies between 56 and 60 K and is highest in the spiral arms; the temperature of the cold component is mostly 15-19 K and rises up to about 25 K at the centre of the galaxy. The intensity-weighted mean temperature of the dust decreases from T ~32 K at the centre to T ~20 K at R ~7 kpc and outwards. We also calculate the intrinsic UBVRIL surface brightness distributions and the spatial luminosity distribution. The intrinsic dust extinction in the V-colour rises from 0.25 mag at the centre to 0.4-0.5 mag at R = 6-13 kpc and decreases smoothly thereafter. The calculated total extinction-corrected luminosity of M31 is L_B = (3.64 pm 0.15) 10^10L_sun, corresponding to an absolute luminosity M_B = (-20.89 pm 0.04) mag. Of the total B-luminosity, 20% (0.24 mag) is obscured from us by the dust inside M31. The intrinsic shape of the bulge is slightly prolate in our best-fit model.

We construct a structural model of the Andromeda Galaxy, simultaneously corresponding to observed photometrical and kinematical data and chemical abundances. In this paper we present the observed surface brightness, colour and metallicity distributions, and compare them to the model galaxy. In Paper II (Tempel, Tamm & Tenjes 2007) we present similar data for the kinematics, and derive the mass distribution of the galaxy. On the basis of U, B, V, R, I and L luminosity distributions, we construct the model galaxy as a superposition of four axially symmetric stellar components: a bulge, a disc, an inner halo and an extended diffuse halo. By using far-infrared imaging data of M31 and a thin dust disc assumption, we derive dust-free surface brightness and colour distributions. We find the total absorption corrected luminosity of M31 to be L_B = (3.3+/-0.7)x10^10 L_sun, corresponding to an absolute luminosity M_B = -20.8+/-0.2 mag. Of the total luminosity, 41% (0.57 mag) is obscured from us by the dust inside M31. Using chemical evolution models, we calculate mass-to-light ratios of the components, correspoding to the colour indices and metallicities. We find the total intrinsic mass-to-light ratio of the visible matter to be M/L_B=3.1-5.8 M_sun/L_sun and the total mass of visible matter M_vis =(10-19)x10^10 M_sun. The use of the model parameters for a dynamical analysis and for determining dark matter distribution is presented in Paper II.

In the present paper we derive the density distribution of dark matter (DM) in a well-observed nearby disc galaxy, the Andromeda galaxy. From photometrical and chemical evolution models constructed in the first part of the study (Tamm, Tempel & Tenjes 2007 (arXiv:0707.4375), hereafter Paper I) we can calculate the mass distribution of visible components (the bulge, the disc, the stellar halo, the outer diffuse stellar halo). In the dynamical model we calculate stellar rotation velocities along the major axis and velocity dispersions along the major, minor and intermediate axes of the galaxy assuming triaxial velocity dispersion ellipsoid. Comparing the calculated values with the collected observational data, we find the amount of DM, which must be added to reach an agreement with the observed rotation and dispersion data. We conclude that within the uncertainties, the DM distributions by Moore, Burkert, Navarro, Frenk & White (NFW) and the Einasto fit with observations nearly at all distances. The NFW and Einasto density distributions give the best fit with observations. The total mass of M 31 with the NFW DM distribution is 1.19*10^12 M_sun, the ratio of the DM mass to the visible mass is 10.0. For the Einasto DM distribution, these values are 1.28*10^12 M_sun and 10.8. The ratio of the DM mass to the visible mass inside the Holmberg radius is 1.75 for the NFW and the Einasto distributions. For different cuspy DM distributions, the virial mass is in a range 6.9-7.9*10^11 M_sun and the virial radius is ~150 kpc. The DM mean densities inside 10 pc for cusped models are 33 and 16 M_sun pc^-3 for the NFW and the Einasto profiles, respectively. For the cored Burkert profile, this value is 0.06 M_sun pc^-3.

In the present paper we develop an algorithm allowing to calculate line-of-sight velocity dispersions in an axisymmetric galaxy outside of the galactic plane. When constructing a self-consistent model, we take into account the galactic surface brightness distribution, stellar rotation curve and velocity dispersions. This algorithm is applied to a Sa galaxy NGC 4594 = M 104, for which there exist velocity dispersion measurements outside of the galactic major axis. The mass distribution model is constructed in two stages. In the first stage we construct a luminosity distribution model, where only galactic surface brightness distribution is taken into account. Thereafter, in the second stage we develop on the basis of the Jeans equations a detailed mass distribution model and calculate line-of-sight velocity dispersions and the stellar rotation curve. Here a dark matter halo is added to visible components. Calculated dispersions are compared with observations along different slit positions perpendicular and parallel to the galactic major axis. In the best-fitting model velocity dispersion ellipsoids are radially elongated. Outside the galactic plane velocity dispersion behaviour is more sensitive to the dark matter density distribution and allows to estimate dark halo parameters.

A photometric study of 22 disk galaxies at redshifs z=0.5-2.6 is conducted, using deep NICMOS J and H band and STIS open mode observations of the HDF-S NICMOS parallel field. Rest-frame B-profiles and (U-V) color profiles are constructed. A number of disks show steeper decrease of luminosity than exponential, referring to disk truncation. Shape of the luminosity profiles does not vary with redshift, but galactic sizes decrease significantly. (U-V) colors and color gradients suggest more intense and centrally concentrated star formation at earlier epochs. On the basis of (U-V) color and chemical evolution models, the disks at z~2.5 have formed between z=3.5-7. The studied parameters are idependent of absolute B luminosity within the sample.

We construct self-consistent light and mass distribution models for 4 distant spiral galaxies. The models include a bulge, a disk and an isothermal dark matter. We find the luminosity profiles to have much steeper cut-off than that of a simple exponential disk. We apply k-corrections and derive rest-frame B-band mass-to-light ratios of the visible components and the central densities of the dark halos; we discover no significant evolution with redshift of these parameters.

We have constructed self-consistent light and mass distribution models for four disk galaxies at redshifts z = 0.48, 0.58, 0.81 and 0.88, using the HST archive WFPC2 observations and rotation curves measured by Vogt et al. (1996) and Rigopoulou et al. (2002). The models consist of three components: a bulge, a disk and a dark matter halo. Similarly to the sample studied in Paper I (Tamm & Tenjes, 2003), light distribution of the galaxies in the outer parts is clearly steeper than a simple exponential disk. After applying k-corrections, calculated mass-to-light ratios for galactic disks within the maximum disk assumption are M/L_B = 0.9, 7.4, 4.3 and 1.4, respectively. Together with the galaxies from Paper I, the mean <M/L_B> = 2.5 at <z> ~0.9, indicating no significant evolution of M/L_B with redshift. Central densities of dark matter halos for an isothermal model are 0.008, 0.035, 0.013, and 0.022 in units M_sun/pc^3, respectively. Together with the galaxies from Paper I, the DM central density of the four galaxies at mean readshift <z> ~0.9 is rho(0) = (0.012-0.028) M_sun/pc^3, also showing no significant evolution with redshift.

We collected a sample of 100 galaxies for which different observers have determined colour indices of globular cluster candidates. The sample includes representatives of galaxies of various morphological types and different luminosities. Colour indices (in most cases (V-I), but also (B-I) and (C-T1)) were transformed into metallicities [Fe/H] according to a relation by Kissler-Patig (1998). These data were analysed with the KMM software in order to estimate similarity of the distribution with uni- or bimodal Gaussian distribution. We found that 45 of 100 systems have bimodal metallicity distributions. Mean metallicity of the metal-poor component for these galaxies is <[Fe/H]> = -1.40\pm 0.02, of the metal-rich component <[Fe/H]> = -0.69 \pm 0.03. Dispersions of the distributions are 0.15 and 0.18, respectively. Distribution of unimodal metallicities is rather wide. These data will be analysed in a subsequent paper in order to find correlations with parameters of galaxies and galactic environment.

Using the HST archive WFPC2 observations and rotation curves measeured by Vogt et al. (1996), we constructed self-consistent light and mass distribution models for three disk galaxies at redshifts z = 0.15, 0.90 and 0.99. The models consist of three components: the bulge, the disk and the dark matter. Spatial density distribution parameters for the components were calculated. After applying k-corrections, mass-to-light ratios for galactic disks within the maximum disk assumption are M/L_B = 4.4, 1.2 and 1.2, respectively. Corresponding central densities of dark matter halos within a truncated isothermal model are 0.0092, 0.028 and 0.015 in units M_sol/pc^3. The light distribution of galaxies in outer parts is steeper than a simple exponential disk.

Using the recently determined spatial velocity components of the extreme runaway star HIP 60350 and a gravitation potential model of the Galaxy, we integrate the orbit of HIP 60350 back to the plane of the Galaxy. In this way, a possible location of the formation of the star is determined. We estimate the uncertainty of the result due to the uncertainties of the gravitational potential model and the errors in the spatial velocity components. The place of birth lies (within the errors) near the position of the open cluster NGC 3603. However, the ejection event which occured about 20 Myr ago is in contradiction with the cluster mean age of 3-4 Myr. We suggest that it occured at an earlier phase in sequential star formation in that region. We discuss also ejection mechanisms. Due to the rather high mass of the star (about $5 \Msol$), the most probable model is that of dynamical ejection.

We use detailed modeling of stellar populations of nearby galaxies to calculate population parameters. Our sample of galaxies includes most galaxies of the Local Group and several more distant giant galaxies. Available data are sufficient to decompose galaxies into the nucleus, the metal rich core, the bulge, the halo, the young and old disks, and the dark halo. We compare mass-to-luminosity ratios and colors of bulges, disks and halos with results of models of galactic chemical evolution. The luminosity weighted mean of the mass-to-luminosity ratio of visible stellar population is M/L_B = 4 +- 1.4 in solar units. This ratio is surprisingly constant for galaxies of very different absolute magnitude.