A joint campaign of various space-borne and ground-based observatories, comprising the Japanese Hinode mission (HOP~338, 20\,--\,30~September 2017), the GREGOR solar telescope, and the \textit{Vacuum Tower Telescope} (VTT), investigated numerous targets such as pores, sunspots, and coronal holes. In this study, we focus on the coronal hole region target. On 24~September 2017, a very extended non-polar coronal hole developed patches of flux emergence, which contributed to the decrease of the overall area of the coronal hole. These flux emergence patches erode the coronal hole and transform the area into a more quiet-Sun-like area, whereby bipolar magnetic structures play an important role. Conversely, flux cancellation leads to the reduction of opposite-polarity magnetic fields and to an increase in the area of the coronal hole. Other global coronal hole characteristics, including the evolution of the associated magnetic flux and the aforementioned area evolution in the EUV, are studied using data of the \textit{Helioseismic and Magnetic Imager} (HMI) and \textit{Atmospheric Imaging Assembly} (AIA) onboard the \textit{Solar Dynamics Observatory} (SDO). The interplanetary medium parameters of the solar wind display parameters compatible with the presence of the coronal hole. Furthermore, a particular transient is found in those parameters.

Solar flares and coronal mass ejections (CMEs) are closely coupled through magnetic reconnection. CMEs are usually accelerated impulsively within the low solar corona, synchronized with the impulsive flare energy release. We investigate the dynamic evolution of a fast CME and its associated X2.8 flare occurring on 2013 May 13. The CME experiences two distinct phases of enhanced acceleration, an impulsive one with a peak value of ~5 km s$^{-2}$ followed by an extended phase with accelerations up to 0.7 km s$^{-2}$. The two-phase CME dynamics is associated with a two-episode flare energy release. While the first episode is consistent with the "standard" eruption of a magnetic flux rope, the second episode of flare energy release is initiated by the reconnection of a large-scale loop in the aftermath of the eruption and produces stronger nonthermal emission up to $\gamma$-rays. In addition, this long-duration flare reveals clear signs of ongoing magnetic reconnection during the decay phase, evidenced by extended HXR bursts with energies up to 100--300 keV and intermittent downflows of reconnected loops for >4 hours. The observations reveal that the two-step flare reconnection substantially contributes to the two-phase CME acceleration, and the impulsive CME acceleration precedes the most intense flare energy release. The implications of this non-standard flare/CME observation are discussed.

Global coronal waves (CWs) and their interaction with coronal holes (CHs) result, among other effects, in the formation of reflected and transmitted waves. Observations of such events provide us with measurements of different CW parameters, such as phase speed and intensity amplitudes. However, several of these parameters are provided with only intermediate observational quality, other parameters, such as the phase speed of transmitted waves, can hardly be observed in general. We present a new method to estimate crucial CW parameters, such as density and phase speed of reflected as well as transmitted waves, Mach numbers and density values of the CH's interior, by using analytical expressions in combination with basic and most accessible observational measurements. The transmission and reflection coefficients are derived from linear theory and subsequently used to calculate estimations for phase speeds of incoming, reflected and transmitted waves. The obtained analytical expressions are validated by performing numerical simulations of CWs interacting with CHs. This new method enables to determine in a fast and straightforward way reliable CW and CH parameters from basic observational measurements which provides a powerful tool to better understand the observed interaction effects between CWs and CHs.

One of the very common in situ signatures of interplanetary coronal mass ejections (ICMEs), as well as other interplanetary transients, are Forbush decreases (FDs), i.e. short-term reductions in the galactic cosmic ray (GCR) flux. A two-step FD is often regarded as a textbook example, which presumably owes its specific morphology to the fact that the measuring instrument passed through the ICME head-on, encountering first the shock front (if developed), then the sheath and finally the CME magnetic structure. The interaction of GCRs and the shock/sheath region, as well as the CME magnetic structure, occurs all the way from Sun to Earth, therefore, FDs are expected to reflect the evolutionary properties of CMEs and their sheaths. We apply modelling to different ICME regions in order to obtain a generic two-step FD profile, which qualitatively agrees with our current observation-based understanding of FDs. We next adapt the models for energy dependence to enable comparison with different GCR measurement instruments (as they measure in different particle energy ranges). We test these modelling efforts against a set of multi-spacecraft observations of the same event, using the Forbush decrease model for the expanding flux rope (ForbMod). We find a reasonable agreement of the ForbMod model for the GCR depression in the CME magnetic structure with multi-spacecraft measurements, indicating that modelled FDs reflect well the CME evolution.

The study of the evolution of coronal holes (CHs) is especially important in the context of high-speed solar wind streams (HSS) emanating from them. Stream interaction regions may deliver large amount of energy into the Earths system, cause geomagnetic storms, and shape interplanetary space. By statistically analysing 16 long-living CHs observed by the SDO, we focus on coronal, morphological and underlying photospheric magnetic field characteristics as well as investigate the evolution of the associated HSSs. We use CATCH to extract and analyse CHs using observations taken by AIA and HMI. We derive changes in the CH properties and correlate them to the CH evolution. Further we analyse the properties of the HSS signatures near 1au from OMNI data by manually extracting the peak bulk velocity of the solar wind plasma. We find that the area evolution of CHs mostly shows a rough trend of growing to a maximum followed by a decay. No correlation of the area evolution to the evolution of the signed magnetic flux and signed magnetic flux density enclosed in the projected CH area was found. From this we conclude that the magnetic flux within the extracted CH boundaries is not the main cause for its area evolution. We derive CH area change rates (growth and decay) of 14.2 +/- 15.0 * 10^8 km^2/day showing a reasonable anti-correlation (cc =-0.48) to the solar activity, approximated by the sunspot number. The change rates of the signed mean magnetic flux density (27.3 +/- 32.2 mG/day) and the signed magnetic flux (30.3 +/- 31.5 * 10^18 Mx/day) were also found to be dependent on solar activity (cc =0.50 and cc =0.69 respectively) rather than on the individual CH evolutions. Further we find that the CH area-to-HSS peak velocity relation is valid for each CH over its evolution but revealing significant variations in the slopes of the regression lines.

We use Solar Dynamics Observatory (SDO)/Atmospheric Imaging Assembly (AIA) data to reconstruct the plasma properties from differential emission measure (DEM) analysis for a previously studied long-lived, low-latitude coronal hole (CH) over its lifetime of ten solar rotations. We initially obtain a non-isothermal DEM distribution with a dominant component centered around 0.9 MK and a secondary smaller component at 1.5 - 2.0 MK. We find that deconvolving the data with the instrument point spread function (PSF) to account for long-range scattered light reduces the secondary hot component. Using the 2012 Venus transit and a 2013 lunar eclipse to test the efficiency of this deconvolution, significant amounts of residual stray light are found for the occulted areas. Accounting for this stray light in the error budget of the different AIA filters further reduces the secondary hot emission, yielding CH DEM distributions that are close to isothermal with the main contribution centered around 0.9 MK. Based on these DEMs, we analyze the evolution of the emission measure (EM), density, and averaged temperature during the CH's lifetime. We find that once the CH is clearly observed in EUV images, the bulk of the CH plasma reveals a quite constant state, i.e. temperature and density reveal no major changes, whereas the total CH area and the photospheric magnetic fine structure inside the CH show a distinct evolutionary pattern. These findings suggest that CH plasma properties are mostly "set" at the CH formation or/and that all CHs have similar plasma properties.

Coronal mass ejections (CMEs) are the primary sources of intense disturbances at Earth, where their geo-effectiveness is largely determined by their dynamic pressure and internal magnetic field, which can be significantly altered during interactions with other CMEs in interplanetary space. We analyse three successive CMEs that erupted from the Sun during September 4-6, 2017, investigating the role of CME-CME interactions as source of the associated intense geomagnetic storm (Dst_min=-142 nT on September 7). To quantify the impact of interactions on the (geo-)effectiveness of individual CMEs, we perform global heliospheric simulations with the EUHFORIA model, using observation-based initial parameters with the additional purpose of validating the predictive capabilities of the model for complex CME events. The simulations show that around 0.45 AU, the shock driven by the September 6 CME started compressing a preceding magnetic ejecta formed by the merging of two CMEs launched on September 4, significantly amplifying its Bz until a maximum factor of 2.8 around 0.9 AU. The following gradual conversion of magnetic energy into kinetic and thermal components reduced the Bz amplification until its almost complete disappearance around 1.8 AU. We conclude that a key factor at the origin of the intense storm triggered by the September 4-6, 2017 CMEs was their arrival at Earth during the phase of maximum Bz amplification. Our analysis highlights how the amplification of the magnetic field of individual CMEs in space-time due to interaction processes can be characterised by a growth, a maximum, and a decay phase, suggesting that the time interval between the CME eruptions and their relative speeds are critical factors in determining the resulting impact of complex CMEs at various heliocentric distances (helio-effectiveness).

Coronal holes are usually defined as dark structures as seen in the extreme ultraviolet and X-ray spectrum which are generally associated with open magnetic field. Deriving reliably the coronal hole boundary is of high interest, as its area, underlying magnetic field, and other properties give important hints towards high speed solar wind acceleration processes and on compression regions arriving at Earth. In this study we present a new threshold based extraction method that incorporates the intensity gradient along the coronal hole boundary, which is implemented as a user-friendly SSWIDL GUI. The Collection of Analysis Tools for Coronal Holes (CATCH) enables the user to download data, perform guided coronal hole extraction and analyze the underlying photospheric magnetic field. We use CATCH to analyze non-polar coronal holes during the SDO-era, based on 193 {\AA} filtergrams taken by the Atmospheric Imaging Assembly (AIA) and magnetograms taken by the Heliospheric and Magnetic Imager (HMI), both on board the Solar Dynamics Observatory (SDO). Between 2010 and 2019 we investigate 707 coronal holes that are located close to the central meridian. We find coronal holes distributed across latitudes of about +/- 60 degree for which we derive sizes between 1.6 x 10 9 and 1.8 x 10 11 km^2 . The absolute value of the mean signed magnetic field strength tends towards an average of 2.9 +/- 1.9 G. As far as the abundance and size of coronal holes is concerned, we find no distinct trend towards the northern or southern hemisphere. We find that variations in local and global conditions may significantly change the threshold needed for reliable coronal hole extraction and thus, we can highlight the importance of individually assessing and extracting coronal holes.

In this study, we investigate in detail the photospheric magnetic structure of 98 coronal holes using line-of-sight magnetograms of SDO/HMI, and for a subset of 42 coronal holes using HINODE/SOT G-band filtergrams. We divided the magnetic field maps into magnetic elements and quiet coronal hole regions by applying a threshold at $\pm 25$ G. We find that the number of magnetic bright points in magnetic elements is well correlated with the area of the magnetic elements (cc=$0.83\pm 0.01$). Further, the magnetic flux of the individual magnetic elements inside coronal holes is related to their area by a power law with an exponent of $1.261\pm 0.004$ (cc=$0.984\pm 0.001$). Relating the magnetic elements to the overall structure of coronal holes, we find that on average ($69\pm 8$) % of the overall unbalanced magnetic flux of the coronal holes arises from long-lived magnetic elements with lifetimes > 40 hours. About ($22\pm 4$) % of the unbalanced magnetic flux arises from a very weak background magnetic field in the quiet coronal hole regions with a mean magnetic field density of about 0.2 to 1.2 G. This background magnetic field is correlated to the flux of the magnetic elements with lifetimes of > 40 h (cc=$0.88\pm 0.02$). The remaining flux arises from magnetic elements with lifetimes < 40 hours. By relating the properties of the magnetic elements to the overall properties of the coronal holes, we find that the unbalanced magnetic flux of the coronal holes is completely determined by the total area that the long-lived magnetic elements cover (cc=$0.994\pm 0.001$).

In a thorough study, we investigate the origin of a remarkable plasma and magnetic field configuration observed in situ on June 22, 2011 near L1, which appears to be a magnetic ejecta (ME) and a shock signature engulfed by a solar wind high-speed stream (HSS). We identify the signatures as an Earth-directed coronal mass ejection (CME), associated with a C7.7 flare on June 21, 2011, and its interaction with a HSS, which emanates from a coronal hole (CH) close to the launch site of the CME. The results indicate that the major interaction between the CME and the HSS starts at a height of 1.3 Rsun up to 3 Rsun. Over that distance range, the CME undergoes a strong north-eastward deflection of at least 30 degrees due to the open magnetic field configuration of the CH. We perform a comprehensive analysis for the CME-HSS event using multi-viewpoint data (from the Solar TErrestrial RElations Observatories, the Solar and Heliospheric Observatory and the Solar Dynamics Observatory), and combined modeling efforts (nonlinear force-free field modeling, Graduated Cylindrical Shell CME modeling, and the Forecasting a CMEs Altered Trajectory ForeCAT model). We aim at better understanding its early evolution and interaction process as well as its interplanetary propagation and related in situ signatures, and finally the resulting impact on the Earth's magnetosphere.

In order to address the growing need for more accurate space weather predictions, a new model named EUHFORIA (EUropean Heliospheric FORecasting Information Asset) was recently developed (Pomoell and Poedts, 2018). We present first results of the performance assessment for the solar wind modeling with EUHFORIA and identify possible limitations of its present setup. Using the basic EUHFORIA 1.0.4. model setup with the default input parameters, we modeled background solar wind (no coronal mass ejections) and compared the obtained results with ACE, in situ measurements. For the need of statistical study we developed a technique of combining daily EUHFORIA runs into continuous time series. The combined time series were derived for the years 2008 (low solar activity) and 2012 (high solar activity) from which in situ speed and density profiles were extracted. We find for the low activity phase a better match between model results and observations compared to the considered high activity time interval. The quality of the modeled solar wind parameters is found to be rather variable. Therefore, to better understand the obtained results we also qualitatively inspected characteristics of coronal holes, sources of the studied fast streams. We discuss how different characteristics of the coronal holes and input parameters to EUHFORIA influence the modeled fast solar wind, and suggest possibilities for the improvements of the model.

The adopted WSA model embedded in EUHFORIA (EUropean Heliospheric FORecasting Information Asset) is compared to EUV observations. According to the standard paradigm coronal holes are sources of open flux thus we use remote sensing EUV observations and \textsc{catch} (Collection of Analysis Tools for Coronal Holes) to extract CH areas and compare them to the open flux areas modelled by EUHFORIA. From the adopted WSA model we employ only the Potential Field Source Surface (PFSS) model for the inner corona and the Schatten Current Sheet (SCS) model for the outer (PFSS+SCS). The height, $R_{\rm ss}$, of the outer boundary of the PFSS, known as the source surface, and the height, $R_{\rm i}$, of the inner boundary of the SCS are important parameters affecting the modelled CH areas. We investigate the impact the two model parameters can have in the modelled results. We vary $R_{\rm ss}$ within the interval [1.4, 3.2]$R_{\rm \odot}$ with a step of 0.1$R_{\rm \odot}$, and $R_{\rm i}$ within the interval [1.3, 2.8]$R_{\rm \odot}$ with the same step, and the condition that $R_{\rm i}<R_{\rm ss}$. This way we have a set of 184 initial parameters to the model and we assess the model results for all these possible height pairs. We conclude that the default heights used so far fail in modelling accurately CH areas and lower heights need to be considered.

We investigate the magnetic characteristics of a persistent coronal hole (CH) extracted from EUV imagery using HMI filtergrams over the timerange February 2012-October 2012. The magnetic field, its distribution as well as the magnetic fine structure in form of flux tubes (FT) are analyzed in different evolutionary states of the CH. We find a strong linear correlation between the magnetic properties (e.g. signed/unsigned magnetic field strength) and area of the CH. As such, the evolutionary pattern in the magnetic field clearly follows the three-phase evolution (growing, maximum and decaying phase) as found from EUV data (Part I). This evolutionary process is most likely driven by strong FTs with a mean magnetic field strength exceeding 50 G. During the maximum phase they entail up to 72% of the total signed magnetic flux of the CH, but only cover up to 3.9% of the total CH area, whereas during the growing and decaying phase, strong FTs entail 54-60% of the signed magnetic flux and cover around 1-2% of the CHs total area. We conclude that small scale-structures of strong unipolar magnetic field are the fundamental building blocks of a CH and govern its evolution.

On July 25 2017 a multi-step Forbush decrease (FD) with the remarkable total amplitude of more than 15\% was observed by MSL/RAD at Mars. We find that these particle signatures are related to very pronounced plasma and magnetic field signatures detected in situ by STEREO-A on July 24 2017, with a higher than average total magnetic field strength reaching more than 60 nT. In the observed time period STEREO-A was at a relatively small longitudinal separation (46 degrees) to Mars and both were located at the back side of the Sun as viewed from Earth. We analyse a number of multi-spacecraft and multi-instrument (both in situ and remote-sensing) observations, and employ modelling to understand these signatures. We find that the solar sources are two CMEs which erupted on July 23 2017 from the same source region on the back side of the Sun as viewed from Earth. Moreover, we find that the two CMEs interact non-uniformly, inhibiting the expansion of one of the CMEs in STEREO-A direction, whereas allowing it to expand more freely in the Mars direction. The interaction of the two CMEs with the ambient solar wind adds up to the complexity of the event, resulting in a long, sub-structured interplanetary disturbance at Mars, where different sub-structures correspond to different steps of the FD, adding-up to a globally large-amplitude FD.

We study the coronal dimming caused by the fast halo CME (deprojected speed v =1250 km s $^{-1})$ associated with the C3.7 two-ribbon flare on 2012 September 27, using Hinode/EIS spectroscopy and SDO/AIA Differential Emission Measure (DEM) analysis. The event reveals bipolar core dimmings encompassed by hook-shaped flare ribbons located at the ends of the flare-related polarity inversion line, and marking the footpoints of the erupting filament. In coronal emission lines of $\log T \, [{\rm K}] = 5.8-6.3$, distinct double component spectra indicative of the superposition of a stationary and a fast up-flowing plasma component with velocities up to 130 km s$^{-1}$ are observed at regions, which were mapped by the scanning EIS slit close in time of their impulsive dimming onset. The outflowing plasma component is found to be of the same order and even dominant over the stationary one, with electron densities in the upflowing component of $2\times 10^{9}$cm$^{-3}$ at $\log T \, [{\rm K}] = 6.2$. The density evolution in core dimming regions derived from SDO/AIA DEM analysis reveals impulsive reductions by $40 - 50\%$ within $\lesssim$10 min, and remains at these reduced levels for hours. The mass loss rate derived from the EIS spectroscopy in the dimming regions is of the same order than the mass increase rate observed in the associated white light CME ($1 \times 10^{12} {\rm \; g \; s}^{-1}$), indicative that the CME mass increase in the coronagraphic field-of-view results from plasma flows from below and not from material piled-up ahead of the outward moving and expanding CME front.

The mass evolution of a coronal mass ejection (CME) is an important parameter characterizing the drag force acting on a CME as it propagates through interplanetary space. Spacecraft measure in-situ plasma densities of CMEs during crossing events, but for investigating the mass evolution, we also need to know the CME geometry, more specific, its volume. Having derived the CME volume and mass from remote sensing data using 3D reconstructed CME geometry, we can calculate the CME density and compare it with in-situ proton density measurements near Earth. From that we may draw important conclusions on a possible mass increase as the CME interacts with the ambient solar wind in the heliosphere. In this paper we will describe in detail the method for deriving the CME volume using the graduated cylindrical shell (GCS) model (Thernisien et al., 2006,2009, see Figure 1). We show that, assuming self-similar expansion, one can derive the volume of the CME from two GCS parameters and that it furthermore can be expressed as a function of distance.

EUV waves are large-scale disturbances in the solar corona initiated by coronal mass ejections. However, solar EUV images show only the wave fronts projections along the line-of-sight of the spacecraft. We perform 3D reconstructions of EUV wave front heights using multi-point observations from STEREO-A and STEREO-B, and study their evolution to properly estimate the EUV wave kinematics. We develop two different methods to solve the matching problem of the EUV wave crest on pairs of STEREO-A/-B images by combining epipolar geometry with the investigation of perturbation profiles. The proposed approaches are applicable at the early and maximum stage of the event when STEREO-A/-B see different facets of the EUV wave, but also at the later stage when the wave front becomes diffusive and faint. The techniques developed are demonstrated on two events observed at different separation of the STEREO spacecraft (42$^\circ$ and 91$^\circ$). For the 7 December 2007 event, we find that the emission of the EUV wave front mainly comes from a height range up to 90-104 Mm, decreasing later to 7-35 Mm. Including the varying height of the EUV wave front allows us to correct the wave kinematics for the projection effects, resulting in velocities in the range 217-266 km/s. For the 13 February 2009 event, the wave front height doubled from 54 to 93 Mm over 10 min, and the velocity derived is 205-208 km/s. In the two events under study, the corrected speeds differ by up to 25% from the uncorrected ones, depending on the wave front height evolution.

Interplanetary evolution of eleven magnetic clouds (MCs) recorded by at least two radially aligned spacecraft is studied. The in situ magnetic field measurements are fitted to a cylindrically symmetric Gold-Hoyle force-free uniform-twist flux-rope configuration. The analysis reveals that in a statistical sense the expansion of studied MCs is compatible with self-similar behavior. However, individual events expose a large scatter of expansion rates, ranging from very weak to very strong expansion. Individually, only four events show an expansion rate compatible with the isotropic self-similar expansion. The results indicate that the expansion has to be much stronger when MCs are still close to the Sun than in the studied 0.47 - 4.8 AU distance range. The evolution of the magnetic field strength shows a large deviation from the behavior expected for the case of an isotropic self-similar expansion. In the statistical sense, as well as in most of the individual events, the inferred magnetic field decreases much slower than expected. Only three events show a behavior compatible with a self-similar expansion. There is also a discrepancy between the magnetic field decrease and the increase of the MC size, indicating that magnetic reconnection and geometrical deformations play a significant role in the MC evolution. About half of the events show a decay of the electric current as expected for the self-similar expansion. Statistically, the inferred axial magnetic flux is broadly consistent with it remaining constant. However, events characterized by large magnetic flux show a clear tendency of decreasing flux.

We analyse the 2010 April 3rd CME using spacecraft coronagraphic images at different vantage points (SOHO, STEREO-A and STEREO-B). We perform a 3D reconstruction of both the flux rope and shock using the Graduated Cylindrical Shell (GCS) model to calculate CME kinematic and morphologic parameters (e.g. velocity, acceleration, radius). The obtained results are fitted with empirical models describing the expansion of the CME radius in the heliosphere and compared with in situ measurements from Wind spacecraft: the CME is found to expand linearly towards Earth. Finally, we relate the event with decreases in the Galactic Cosmic Ray (GCR) Flux, known as Forbush decreases (FD), detected by EPHIN instrument onboard SOHO spacecraft. We use the analytical diffusion-expansion model (ForbMod) to calculate the magnetic field power law index, obtaining a value of approximately 1.6, thus estimating a starting magnetic field of around 0.01 G and an axial magnetic flux of around 5x1E20 Mx at 15.6 Rsun.

In this work we use solar observations with the ALMA radio telescope at the wavelength of 1.21 mm. The aim of the analysis is to improve understanding of the solar chromosphere, a dynamic layer in the solar atmosphere between the photosphere and corona. The study has an observational and a modeling part. In the observational part full-disc solar images are analyzed. Based on a modified FAL atmospheric model, radiation models for various observed solar structures are developed. Finally, the observational and modeling results are compared and discussed.

Coronal Mass Ejections (CMEs) are believed to be effective in producing shocks in the solar corona and the interplanetary space. One of the important signatures of shocks and shock acceleration are Type II solar radio bursts that drift with the shock speed and produce bands of fundamental and higher harmonic plasma radio emission. An intriguing aspect of Type II radio bursts is the occasional split of a harmonic band into thinner lanes, known as band-splitting. Here, we report a detailed imaging and spectroscopic observation of a CME-driven shock producing band-splitting in a Type II burst. Using the Low Frequency Array (LOFAR), we examine the spatial and temporal relation of the Type II burst to the associated CME event, use source imaging to calculate the apparent coronal density, and demonstrate how source imaging can be used to estimate projection effects. We consider two widely accepted band-splitting models that make opposing predictions regarding the locations of the true emission sources with respect to the shock front. Our observations suggest that the locations of the upper and lower sub-band sources are spatially separated by $\sim 0.2 \pm 0.05 \, \mathrm{R_\odot}$. However, we quantitatively show, for the first time, that such separation is consistent with radio-wave scattering of plasma radio emission from a single region, implying that the split-band Type II sources could originate from nearly co-spatial locations. Considering the effects of scattering, the observations provide supporting evidence for the model that interprets the band-splitting as emission originating in the upstream and downstream regions of the shock front, two virtually co-spatial areas.

Accurate forecasting of the arrival time and subsequent geomagnetic impacts of Coronal Mass Ejections (CMEs) at Earth is an important objective for space weather forecasting agencies. Recently, the CME Arrival and Impact working team has made significant progress towards defining community-agreed metrics and validation methods to assess the current state of CME modeling capabilities. This will allow the community to quantify our current capabilities and track progress in models over time. Firstly, it is crucial that the community focuses on the collection of the necessary metadata for transparency and reproducibility of results. Concerning CME arrival and impact we have identified 6 different metadata types: 3D CME measurement, model description, model input, CME (non-)arrival observation, model output data and metrics and validation methods. Secondly, the working team has also identified a validation time period, where all events within the following two periods will be considered: 1 January 2011-31 December 2012 and January 2015-31 December 2015. Those two periods amount to a total of about 100 hit events at Earth and a large amount of misses. Considering a time period will remove any bias in selecting events and the event set will represent a sample set that will not be biased by user selection. Lastly, we have defined the basic metrics and skill scores that the CME Arrival and Impact working team will focus on.

We present a refined statistical analysis based on interplanetary coronal mass ejections as well as co-rotating interaction regions for the time period 2003-2015 to estimate the impact of different solar wind types on the geomagnetic activity and the neutral density in the Earth's thermosphere. For the time-based delimitation of the events, we rely on the catalog maintained by Richardson and Cane and the CIR-lists provided by S. Vennerstroem and Jian et al. [2011]. These archives are based on in-situ measurements from the ACE and/or the Wind spacecraft. On this basis, we thoroughly investigated 196 Earth-directed ICME and 195 CIR events. To verify the impact on the Earth's thermosphere we determined neutral mass densities by using accelerometer measurements collected by the low-Earth orbiting satellites GRACE and CHAMP. Subsequently, the atmospheric densities are related to characteristic ICME parameters. In this process a new calibration method has been examined. Since increased solar activity may lead to a decrease of the satellites orbital altitude we additionally assessed the orbital decay for each of the events and satellites. The influence of CIR events is in the same range of magnitude as the majority of the ICMEs (186 out of 196). Even though, the extended investigation period between 2011 and 2015 has a lack of extreme solar events the combined analysis reveals comparable correlation coefficients between the neutral densities and the various ICME and geomagnetic parameters (mostly > 0.85). The evaluation of orbit decay rates at different altitudes revealed a high dependency on the satellite actual altitude.

The X8.2 event of 10 September 2017 provides unique observations to study the genesis, magnetic morphology and impulsive dynamics of a very fast CME. Combining GOES-16/SUVI and SDO/AIA EUV imagery, we identify a hot ($T\approx 10-15$ MK) bright rim around a quickly expanding cavity, embedded inside a much larger CME shell ($T\approx 1-2$ MK). The CME shell develops from a dense set of large AR loops ($\gtrsim$0.5 $R_s$), and seamlessly evolves into the CME front observed in LASCO C2. The strong lateral overexpansion of the CME shell acts as a piston initiating the fast EUV wave. The hot cavity rim is demonstrated to be a manifestation of the dominantly poloidal flux and frozen-in plasma added to the rising flux rope by magnetic reconnection in the current sheet beneath. The same structure is later observed as the core of the white light CME, challenging the traditional interpretation of the CME three-part morphology. The large amount of added magnetic flux suggested by these observations explains the extreme accelerations of the radial and lateral expansion of the CME shell and cavity, all reaching values of $5 - 10$ km s$^{-2}$. The acceleration peaks occur simultaneously with the first RHESSI $100-300$ keV hard X-ray burst of the associated flare, further underlining the importance of the reconnection process for the impulsive CME evolution. Finally, the much higher radial propagation speed of the flux rope in relation to the CME shell causes a distinct deformation of the white light CME front and shock.

We present a statistical study of 62 coronal dimming events associated with Earth-directed CMEs during the quasi-quadrature period of STEREO and SDO. This unique setting allows us to study both phenomena in great detail and compare characteristic quantities statistically. Coronal dimmings are observed on-disk by SDO/AIA and HMI, while the CME kinematics during the impulsive acceleration phase is studied close to the limb with STEREO/EUVI and COR, minimizing projection effects. The dimming area, its total unsigned magnetic flux and its total brightness, reflecting properties of the total dimming region at its final extent, show the highest correlations with the CME mass ($c\sim0.6-0.7$). Their corresponding time derivatives, describing the dynamics of the dimming evolution, show the strongest correlations with the CME peak velocity ($c\sim 0.6$). The highest correlation of $c=0.68\pm0.08$ is found with the mean intensity of dimmings, indicating that the lower the CME starts in the corona, the faster it propagates. No significant correlation between dimming parameters and the CME acceleration was found. However, for events where high-cadence STEREO observations were available, the mean unsigned magnetic field density in the dimming regions tends to be positively correlated with the CME peak acceleration ($c=0.42\pm0.20$). This suggests that stronger magnetic fields result in higher Lorentz forces providing stronger driving force for the CME acceleration. Specific coronal dimming parameters correlate with both, CME and flare quantities providing further evidence for the flare-CME feedback relationship. For events in which the CME occurs together with a flare, coronal dimmings statistically reflect the properties of both phenomena.

On 2017-09-10, solar energetic particles (SEPs) originating from the active region 12673 were registered as a ground level enhancement (GLE) at Earth and the biggest GLE on the surface of Mars as observed by the Radiation Assessment Detector (RAD) since the landing of the Curiosity rover in August 2012. Based on multi-point coronagraph images, we identify the initial 3D kinematics of an extremely fast CME and its shock front as well as another 2 CMEs launched hours earlier (with moderate speeds) using the Graduated Cylindrical Shell (GCS) model. These three CMEs interacted as they propagated outwards into the heliosphere and merged into a complex interplanetary CME (ICME). The arrival of the shock and ICME at Mars caused a very significant Forbush Decrease (FD) seen by RAD only a few hours later than that at Earth which is about 0.5 AU closer to the Sun. We investigate the propagation of the three CMEs and the consequent ICME together with the shock using the Drag Based Model (DBM) and the WSA-ENLIL plus cone model constrained by the in-situ SEP and FD/shock onset timing. The synergistic modeling of the ICME and SEP arrivals at Earth and Mars suggests that in order to better predict potentially hazardous space weather impacts at Earth and other heliospheric locations for human exploration missions, it is essential to analyze 1) the CME kinematics, especially during their interactions and 2) the spatially and temporally varying heliospheric conditions, such as the evolution and propagation of the stream interaction regions.

Coronal dimmings, localized regions of reduced emission in the EUV and soft X-rays, are interpreted as density depletions due to mass loss during the CME expansion. They contain crucial information on the early evolution of CMEs low in the corona. For 62 dimming events, characteristic parameters are derived, statistically analyzed and compared with basic flare quantities. On average, coronal dimmings have a size of $2.15\times10^{10}$ km$^{2}$, contain a total unsigned magnetic flux of $1.75\times10^{21}$ Mx, and show a total brightness decrease of $-1.91\times10^{6}$ DN, which results in a relative decrease of $\sim$60% compared to the pre-eruption intensity level. Their main evacuation phase lasts for $\sim$50 minutes. The dimming area, the total dimming brightness, and the total unsigned magnetic flux show the highest correlation with the flare SXR fluence ($c\gtrsim0.7$). Their corresponding time derivatives, describing the dimming dynamics, strongly correlate with the GOES flare class ($c\gtrsim 0.6$). For 60% of the events we identified core dimmings, i.e. signatures of an erupting flux rope. They contain 20% of the magnetic flux covering only 5% of the total dimming area. Secondary dimmings map overlying fields that are stretched during the eruption and closed down by magnetic reconnection, thus adding flux to the erupting flux rope via magnetic reconnection. This interpretation is supported by the strong correlation between the magnetic fluxes of secondary dimmings and flare reconnection fluxes ($c=0.63\pm0.08$), the balance between positive and negative magnetic fluxes ($c=0.83\pm0.04$) within the total dimmings and the fact that for strong flares ($>$M1.0) the reconnection and secondary dimming fluxes are roughly equal.

We investigate the evolution of a well-observed, long-lived, low-latitude coronal hole (CH) over 10 solar rotations in the year 2012. By combining EUV imagery from STEREO-A/B and SDO we are able to track and study the entire evolution of the CH having a continuous 360$\deg$ coverage of the Sun. The remote sensing data are investigated together with in-situ solar wind plasma and magnetic field measurements from STEREO-A/B, ACE and WIND. From this we obtain how different evolutionary states of the CH as observed in the solar atmosphere (changes in EUV intensity and area) affect the properties of the associated high-speed stream measured at $1$AU. Most distinctly pronounced for the CH area, three development phases are derived: a) growing, b) maximum, and c) decaying phase. During these phases the CH area a) increases over a duration of around three months from about $1 \cdot 10^{10} \mathrm{km}^{2}$ to $6 \cdot 10^{10} \mathrm{km}^{2}$, b) keeps a rather constant area for about one month of $> 9 \cdot 10^{10} \mathrm{km}^{2}$, and c) finally decreases in the following three months below $1 \cdot 10^{10} \mathrm{km}^{2}$ until the CH cannot be identified anymore. The three phases manifest themselves also in the EUV intensity and in in-situ measured solar wind proton bulk velocity. Interestingly, the three phases are related to a different range in solar wind speed variations and we find for the growing phase a range of $460-600$~km~s$^{-1}$, for the maximum phase $600-720$~km~s$^{-1}$, and for the decaying phase a more irregular behavior connected to slow and fast solar wind speed of $350-550$~km~s$^{-1}$.

We present an analytical diffusion-expansion Forbush decrease (FD) model ForbMod which is based on the widely used approach of the initially empty, closed magnetic structure (i.e. flux rope) which fills up slowly with particles by perpendicular diffusion. The model is restricted to explain only the depression caused by the magnetic structure of the interplanetary coronal mass ejection (ICME). We use remote CME observations and a 3D reconstruction method (the Graduated Cylindrical Shell method) to constrain initial boundary conditions of the FD model and take into account CME evolutionary properties by incorporating flux rope expansion. Several flux rope expansion modes are considered, which can lead to different FD characteristics. In general, the model is qualitatively in agreement with observations, whereas quantitative agreement depends on the diffusion coefficient and the expansion properties (interplay of the diffusion and the expansion). A case study was performed to explain the FD observed 2014 May 30. The observed FD was fitted quite well by ForbMod for all expansion modes using only the diffusion coefficient as a free parameter, where the diffusion parameter was found to correspond to expected range of values. Our study shows that in general the model is able to explain the global properties of FD caused by FR and can thus be used to help understand the underlying physics in case studies.

We study the properties of 115 coronal holes in the time-range from 2010/08 to 2017/03, the peak velocities of the corresponding high-speed streams as measured in the ecliptic at 1 AU, and the corresponding changes of the Kp index as marker of their geo-effectiveness. We find that the peak velocities of high-speed streams depend strongly on both the ar- eas and the co-latitudes of their solar source coronal holes with regard to the heliospheric latitude of the satellites. Therefore, the co-latitude of their source coronal hole is an im- portant parameter for the prediction of the high-speed stream properties near the Earth. We derive the largest solar wind peak velocities normalized to the coronal hole areas for coronal holes located near the solar equator, and that they linearly decrease with increas- ing latitudes of the coronal holes. For coronal holes located at latitudes & 60{\deg}, they turn statistically to zero, indicating that the associated high-speed streams have a high chance to miss the Earth. Similar, the Kp index per coronal hole area is highest for the coronal holes located near the solar equator and strongly decreases with increasing latitudes of the coronal holes. We interpret these results as an effect of the three-dimensional propaga- tion of high-speed streams in the heliosphere, i.e., high-speed streams arising from coro- nal holes near the solar equator propagate in direction towards and directly hit the Earth, whereas solar wind streams arising from coronal holes at higher solar latitudes only graze or even miss the Earth.

In this paper, we analyzed a failed and a successful eruption that initiated from the same polarity inversion line within NOAA AR 11387 on December 25, 2011. They both started from a reconnection between sheared arcades, having distinct pre-eruption conditions and eruption details: before the failed one, the magnetic fields of the core region had a weaker non-potentiality; the external fields had a similar critical height for torus instability, a similar local torus-stable region, but a larger magnetic flux ratio (of low corona and near-surface region) as compared to the successful one. During the failed eruption, a smaller Lorentz force impulse was exerted on the outward ejecta; the ejecta had a much slower rising speed. Factors that might lead to the initiation of the failed eruption are identified: 1) a weaker non-potentiality of the core region, and a smaller Lorentz force impulse gave the ejecta a small momentum; 2) the large flux ratio, and the local torus-stable region in the corona provided strong confinements that made the erupting structure regain an equilibrium state.

Coronal mass ejections (CMEs) are often associated with coronal dimmings, i.e. transient dark regions that are most distinctly observed in Extreme Ultra-violet (EUV) wavelengths. Using Atmospheric Imaging Assembly (AIA) data, we apply Differential Emission Measure (DEM) diagnostics to study the plasma characteristics of six coronal dimming events. In the core dimming region, we find a steep and impulsive decrease of density with values up to 50-70%. Five of the events also reveal an associated drop in temperature of 5-25%. The secondary dimming regions also show a distinct decrease in density, but less strong, decreasing by 10-45%. In both the core and the secondary dimming the density changes are much larger than the temperature changes, confirming that the dimming regions are mainly caused by plasma evacuation. In the core dimming, the plasma density reduces rapidly within the first 20-30 min after the flare start, and does not recover for at least 10 hrs later, whereas the secondary dimming tends to be more gradual and starts to replenish after 1-2 hrs. The pre-event temperatures are higher in the core dimming (1.7-2.6 MK) than in the secondary dimming regions (1.6-2.0 MK). Both core and secondary dimmings are best observed in the AIA 211 \AA\ and 193 \AA\ filters. These findings suggest that the core dimming corresponds to the footpoints of the erupting flux rope rooted in the AR, while the secondary dimming represents plasma from overlying coronal structures that expand during the CME eruption.

Coronal dimmings are distinct phenomena associated to coronal mass ejections (CMEs). The study of coronal dimmings and the extraction of their characteristic parameters helps us to obtain additional information of CMEs, especially on the initiation and early evolution of Earth-directed CMEs. We present a new approach to detect coronal dimming regions based on a thresholding technique applied on logarithmic base-ratio images. Characteristic dimming parameters describing the dynamics, morphology, magnetic properties and the brightness of coronal dimming regions are extracted by cumulatively summing newly dimmed pixels over time. It is also demonstrated how core dimming regions are identified as a subset of the overall identified dimming region. We successfully apply our method to two well-observed coronal dimming events. For both events the core dimming regions are identified and the spatial evolution of the dimming area reveals the expansion of the dimming region around these footpoints. We also show that in the early impulsive phase of the dimming expansion the total unsigned magnetic flux involved in the dimming regions is balanced and that up to 30% of this flux results from the localized core dimming regions. Furthermore, the onset in the profile of the area growth rate is co-temporal with the start of the associated flares and in one case also with the fast rise of the CME, indicating a strong relationship of coronal dimmings with both flare and CMEs.

We present a concept study of a solar wind forecasting method for Earth, based on persistence modeling from STEREO in-situ measurements combined with multi-viewpoint EUV observational data. By comparing the fractional areas of coronal holes (CHs) extracted from EUV data of STEREO and SoHO/SDO, we perform an uncertainty assessment derived from changes in the CHs and apply those changes to the predicted solar wind speed profile at 1AU. We evaluate the method for the time period 2008-2012, and compare the results to a persistence model based on ACE in-situ measurements and to the STEREO persistence model without implementing the information on CH evolution. Compared to an ACE based persistence model, the performance of the STEREO persistence model which takes into account the evolution of CHs, is able to increase the number of correctly predicted high-speed streams by about 12%, and to decrease the number of missed streams by about 23%, and the number of false alarms by about 19%. However, the added information on CH evolution is not able to deliver more accurate speed values for the forecast than using the STEREO persistence model without CH information which performs better than an ACE based persistence model. Investigating the CH evolution between STEREO and Earth view for varying separation angles over ~25-140{\deg} East of Earth, we derive some relation between expanding CHs and increasing solar wind speed, but a less clear relation for decaying CHs and decreasing solar wind speed. This fact most likely prevents the method from making more precise forecasts. The obtained results support a future L5 mission and show the importance and valuable contribution using multi-viewpoint data.

The drag-based model (DBM) for heliospheric propagation of coronal mass ejections (CMEs) is a widely used analytical model which can predict CME arrival time and speed at a given heliospheric location. It is based on the assumption that the propagation of CMEs in interplanetary space is solely under the influence of magnetohydrodynamical drag, where CME propagation is determined based on CME initial properties as well as the properties of the ambient solar wind. We present an upgraded version, covering ensemble modelling to produce a distribution of possible ICME arrival times and speeds, the drag-based ensemble model (DBEM). Multiple runs using uncertainty ranges for the input values can be performed in almost real-time, within a few minutes. This allows us to define the most likely ICME arrival times and speeds, quantify prediction uncertainties and determine forecast confidence. The performance of the DBEM is evaluated and compared to that of ensemble WSA-ENLIL+Cone model (ENLIL) using the same sample of events. It is found that the mean error is $ME=-9.7$ hours, mean absolute error $MAE=14.3$ hours and root mean square error $RMSE=16.7$ hours, which is somewhat higher than, but comparable to ENLIL errors ($ME=-6.1$ hours, $MAE=12.8$ hours and $RMSE=14.4$ hours). Overall, DBEM and ENLIL show a similar performance. Furthermore, we find that in both models fast CMEs are predicted to arrive earlier than observed, most probably owing to the physical limitations of models, but possibly also related to an overestimation of the CME initial speed for fast CMEs.

The propagation of 15 interplanetary coronal mass ejections (ICMEs) from Earth's orbit (1 AU) to Mars (~ 1.5 AU) has been studied with their propagation speed estimated from both measurements and simulations. The enhancement of magnetic fields related to ICMEs and their shock fronts cause the so-called Forbush decrease, which can be de- tected as a reduction of galactic cosmic rays measured on-ground. We have used galactic cosmic ray (GCR) data from in-situ measurements at Earth, from both STEREO A and B as well as GCR measurements by the Radiation Assessment Detector (RAD) instrument onboard Mars Science Laboratory (MSL) on the surface of Mars. A set of ICME events has been selected during the periods when Earth (or STEREO A or B) and Mars locations were nearly aligned on the same side of the Sun in the ecliptic plane (so-called opposition phase). Such lineups allow us to estimate the ICMEs' transit times between 1 and 1.5 AU by estimating the delay time of the corresponding Forbush decreases measured at each location. We investigate the evolution of their propagation speeds before and after passing Earth's orbit and find that the deceleration of ICMEs due to their interaction with the ambient solar wind may continue beyond 1 AU. We also find a substantial variance of the speed evolution among different events revealing the dynamic and diverse nature of eruptive solar events. Furthermore, the results are compared to simulation data obtained from two CME propagation models, namely the Drag-Based Model and ENLIL plus cone model.

The Solar TErrestrial RElations Observatory (STEREO) and its heliospheric imagers (HI) have provided us the possibility to enhance our understanding of the interplanetary propagation of coronal mass ejections (CMEs). HI-based methods are able to forecast arrival times and speeds at any target and use the advantage of tracing a CME's path of propagation up to 1 AU. In our study we use the ELEvoHI model for CME arrival prediction together with an ensemble approach to derive uncertainties in the modeled arrival time and impact speed. The CME from 3 November 2010 is analyzed by performing 339 model runs that are compared to in situ measurements from lined-up spacecraft MESSENGER and STEREO-B. Remote data from STEREO-B showed the CME as halo event, which is comparable to an HI observer situated at L1 and observing an Earth-directed CME. A promising and easy approach is found by using the frequency distributions of four ELEvoHI output parameters, drag parameter, background solar wind speed, initial distance and speed. In this case study, the most frequent values of these outputs lead to the predictions with the smallest errors. Restricting the ensemble to those runs, we are able to reduce the mean absolute arrival time error from $3.5 \pm 2.6$ h to $1.6 \pm 1.1$ h at 1 AU. Our study suggests that L1 may provide a sufficient vantage point for an Earth-directed CME, when observed by HI, and that ensemble modeling could be a feasible approach to use ELEvoHI operationally.

In this paper, we identified the magnetic source locations of 142 quasi- homologous (QH) coronal mass ejections (CMEs), of which 121 are from solar cycle (SC) 23 and 21 from SC 24. Among those CMEs, 63% originated from the same source location as their predecessor (defined as S-type), while 37% origi- nated from a different location within the same active region as their predecessor (defined as D-type). Their distinctly different waiting time distribution, peaking around 7.5 and 1.5 hours for S- and D-type CMEs, suggests that they might involve different physical mechanisms with different characteristic time scales. Through detailed analysis based on non-linear force free (NLFF) coronal mag- netic field modeling of two exemplary cases, we propose that the S-type QH CMES might involve a recurring energy release process from the same source location (by magnetic free energy replenishment), whereas the D-type QH CMEs can happen when a flux tube system disturbed by a nearby CME.

We analyze the well observed flare-CME event from October 1, 2011 (SOL2011-10-01T09:18) covering the complete chain of action - from Sun to Earth - for a better understanding of the dynamic evolution of the CME and its embedded magnetic field. We study the solar surface and atmosphere associated with the flare-CME from SDO and ground-based instruments, and also track the CME signature off-limb from combined EUV and white-light data with STEREO. By applying 3D reconstruction techniques (GCS, total mass) to stereoscopic STEREO-SoHO coronagraph data, we track the temporal and spatial evolution of the CME in interplanetary space and derive its geometry and 3D-mass. We combine the GCS and Lundquist model results to derive the axial flux and helicity of the MC from in-situ measurements (Wind). This is compared to nonlinear force-free (NLFF) model results as well as to the reconnected magnetic flux derived from the flare ribbons (flare reconnection flux) and the magnetic flux encompassed by the associated dimming (dimming flux). We find that magnetic reconnection processes were already ongoing before the start of the impulsive flare phase, adding magnetic flux to the flux rope before its final eruption. The dimming flux increases by more than 25% after the end of the flare, indicating that magnetic flux is still added to the flux rope after eruption. Hence, the derived flare reconnection flux is most probably a lower limit for estimating the magnetic flux within the flux rope. We find that the magnetic helicity and axial magnetic flux are reduced in interplanetary space by ~50% and 75%, respectively, possibly indicating to an erosion process. A mass increase of 10% for the CME is observed over the distance range from ~4-20 Rs. The temporal evolution of the CME associated core dimming regions supports the scenario that fast outflows might supply additional mass to the rear part of the CME.

We investigate the statistics of 288 low-latitude coronal holes extracted from SDO/AIA-193 filtergrams over the time range 2011/01/01 to 2013/12/31. We analyse the distribution of characteristic coronal hole properties, such as the areas, mean AIA-193 intensities, and mean magnetic field densities, the local distribution of the SDO/AIA-193 intensity and the magnetic field within the coronal holes, and the distribution of magnetic flux tubes in coronal holes. We find that the mean magnetic field density of all coronal holes under study is 3.0 +- 1.6 G, and the percentage of unbalanced magnetic flux is 49 +- 16 %. The mean magnetic field density, the mean unsigned magnetic field density, and the percentage of unbalanced magnetic flux of coronal holes depend strongly pairwise on each other, with correlation coefficients cc > 0.92. Furthermore, we find that the unbalanced magnetic flux of the coronal holes is predominantly concentrated in magnetic flux tubes: 38 % (81 %) of the unbalanced magnetic flux of coronal holes arises from only 1 % (10 %) of the coronal hole area, clustered in magnetic flux tubes with field strengths > 50 G (10 G). The average magnetic field density and the unbalanced magnetic flux derived from the magnetic flux tubes correlate with the mean magnetic field density and the unbalanced magnetic flux of the overall coronal hole (cc > 0.93). These findings give evidence that the overall magnetic characteristics of coronal holes are governed by the characteristics of the magnetic flux tubes.

Interplanetary space is characteristically structured mainly by high-speed solar wind streams emanating from coronal holes and transient disturbances such as coronal mass ejections (CMEs). While high-speed solar wind streams pose a continuous outflow, CMEs abruptly disrupt the rather steady structure causing large deviations from the quiet solar wind conditions. For the first time, we give a quantification of the duration of disturbed conditions (preconditioning) for interplanetary space caused by CMEs. To this aim, we investigate the plasma speed component of the solar wind and the impact of in situ detected CMEs (ICMEs), compared to different background solar wind models (ESWF, WSA, persistence model) for the time range 2011-2015. We quantify in terms of standard error measures the deviations between modeled background solar wind speed and observed solar wind speed. Using the mean absolute error, we obtain an average deviation for quiet solar activity within a range of 75.1-83.1 km/s. Compared to this baseline level, periods within the ICME interval showed an increase of 18-32% above the expected background and the period of 2 days after the ICME displayed an increase of 9-24%. We obtain a total duration of enhanced deviations over about 3 and up to 6 days after the ICME start, which is much longer than the average duration of an ICME disturbance itself (~1.3 days), concluding that interplanetary space needs ~2-5 days to recover from the impact of ICMEs. The obtained results have strong implications for studying CME propagation behavior and also for space weather forecasting.

We investigate the high-speed ($v >$ 1000 km s$^{-1}$) extreme-ultraviolet (EUV) wave associated with an X1.2 flare and coronal mass ejection (CME) from NOAA active region 11283 on 2011 September 6 (SOL2011-09-06T22:12). This EUV wave features peculiar on-disk signatures, in particular we observe an intermittent "disappearance" of the front for 120 s in SDO/AIA 171, 193, 211 {\AA} data, whereas the 335 {\AA} filter, sensitive to hotter plasmas (T$\sim$2.5 MK), shows a continuous evolution of the wave front. The eruption was also accompanied by localized coronal dimming regions. We exploit the multi-point quadrature position of SDO and STEREO-A, to make a thorough analysis of the EUV wave evolution, with respect to its kinematics and amplitude evolution and reconstruct the SDO line-of-sight (LOS) direction of the identified coronal dimming regions in STEREO-A. We show that the observed intensities of the dimming regions in SDO/AIA depend on the structures that are lying along their LOS and are the combination of their individual intensities, e.g. the expanding CME body, the enhanced EUV wave and CME front. In this context, we conclude that the intermittent disappearance of the EUV wave in the AIA 171, 193, 211 {\AA} filters, which are channels sensitive to plasma with temperatures below $\sim$2 MK is also caused by such LOS integration effects. These observations clearly demonstrate that single-view image data provide us with limited insight to correctly interpret coronal features.

During late October 2014, active region NOAA 2192 caused an unusual high level of solar activity, within an otherwise weak solar cycle. While crossing the solar disk, during a period of 11 days, it was the source of 114 flares of GOES class C1.0 and larger, including 29 M- and 6 X-flares. Surprisingly, none of the major flares (GOES class M5.0 and larger) was accompanied by a coronal mass ejection, contrary to statistical tendencies found in the past. From modeling the coronal magnetic field of NOAA 2192 and its surrounding, we suspect that the cause of the confined character of the flares is the strong surrounding and overlying large-scale magnetic field. Furthermore, we find evidence for multiple magnetic reconnection processes within a single flare, during which electrons were accelerated to unusual high energies.

This document was created by the Solar Simulations for the Atacama Large Millimeter Observatory Network (SSALMON) in preparation of the first regular observations of the Sun with the Atacama Large Millimeter/submillimeter Array (ALMA), which are anticipated to start in ALMA Cycle 4 in October 2016. The science cases presented here demonstrate that a large number of scientifically highly interesting observations could be made already with the still limited solar observing modes foreseen for Cycle 4 and that ALMA has the potential to make important contributions to answering long-standing scientific questions in solar physics. With the proposal deadline for ALMA Cycle 4 in April 2016 and the Commissioning and Science Verification campaign in December 2015 in sight, several of the SSALMON Expert Teams composed strategic documents in which they outlined potential solar observations that could be feasible given the anticipated technical capabilities in Cycle 4. These documents have been combined and supplemented with an analysis, resulting in recommendations for solar observing with ALMA in Cycle 4. In addition, the detailed science cases also demonstrate the scientific priorities of the solar physics community and which capabilities are wanted for the next observing cycles. The work on this White Paper effort was coordinated in close cooperation with the two international solar ALMA development studies led by T. Bastian (NRAO, USA) and R. Brajsa, (ESO). This document will be further updated until the beginning of Cycle 4 in October 2016. In particular, we plan to adjust the technical capabilities of the solar observing modes once finally decided and to further demonstrate the feasibility and scientific potential of the included science cases by means of numerical simulations of the solar atmosphere and corresponding simulated ALMA observations.

Coronal mass ejections (CMEs) are the most dynamic phenomena in our solar system. They abruptly disrupt the continuous outflow of solar wind by expelling huge clouds of magnetized plasma into interplanetary space with velocities enabling to cross the Sun-Earth distance within a few days. Earth-directed CMEs may cause severe geomagnetic storms when their embedded magnetic fields and the shocks ahead compress and reconnect with the Earth's magnetic field. The transit times and impacts in detail depend on the initial CME velocity, size, and mass, as well as on the conditions and coupling processes with the ambient solar wind flow in interplanetary space. The observed CME parameters may be severly affected by projection effects and the constant changing environmental conditions are hard to derive. This makes it difficult to fully understand the physics behind CME evolution, preventing to do a reliable forecast of Earth-directed events. This short review focusing on observational data, shows recent methods which were developed to derive the CME kinematical profile for the entire Sun-Earth distance range as well as studies which were performed to shed light on the physical processes that CMEs encounter when propagating from Sun to Earth.

Kanzelh\"ohe Observatory (KSO) was founded during World War II by the "Deutsche Luftwaffe" (German Airforces) as one station of a network of observatories, which should provide information on solar activity in order to better assess the actual conditions of the Earth's ionosphere in terms of radio wave propagation. The solar observations began in 1943 with photographs of the photosphere, drawings of sunspots, plage regions and faculae, as well as patrol observations of the solar corona. At the beginning all data was sent to Freiburg (Germany). After WWII international cooperation was established and the data was sent to Zurich, Paris, Moscow and Greenwich. Relative sunspot numbers are derived since 1944. The agreement between relative sunspot numbers derived at KSO and the new International Sunspot Number (ISN) \citep{SIDC} lies within $\sim10\%$. However, revisiting the historical data, we also find periods with larger deviations. The reasons for the deviations were twofold: (1) On the one hand a major instrumental change took place during which a relocation and modification of the instrument happened. (2) On the other hand, a period of frequent replacement of personnel caused significant deviations, i.e. stressing the importance of experienced observers. On long-term, the instrumental improvements led to better image quality. Additionally we find a long term trend towards better seeing conditions since the year 2000. We may speculate that this is related to climatic changes.

We analyzed high-cadence sit-and-stare observations acquired with the Hinode/EIS spectrometer and HXR measurements acquired with RHESSI during an M-class flare. During the flare impulsive phase, we observe no significant flows in the cooler Fe XIII line but strong upflows, up to 80-150 km/s, in the hotter Fe XVI line. The largest Doppler shifts observed in the Fe XVI line were co-temporal with the sharp intensity peak. The electron density obtained from a Fe XIII line pair ratio exhibited fast increase (within two minutes) from the pre-flare level of 5.01x10^(9) cm^(-3) to 3.16x10^(10) cm^(-3) during the flare peak. The nonthermal energy flux density deposited from the coronal acceleration site to the lower atmospheric layers during the flare peak was found to be 1.34x10^(10) erg/s/cm^(2) for a low-energy cut-off that was estimated to be 16 keV. During the decline flare phase, we found a secondary intensity and density peak of lower amplitude that was preceded by upflows of 15 km/s that were detected in both lines. The flare was also accompanied by a filament eruption that was partly captured by the EIS observations. We derived Doppler velocities of 250-300 km/s for the upflowing filament material.The spectroscopic results for the flare peak are consistent with the scenario of explosive chromospheric evaporation, although a comparatively low value of the nonthermal energy flux density was determined for this phase of the flare. This outcome is discussed in the context of recent hydrodynamic simulations. It provides observational evidence that the response of the atmospheric plasma strongly depends on the properties of the electron beams responsible for the heating, in particular the steepness of the energy distribution.

For the period July 2003 to August 2010, the interplanetary coronal mass ejection (ICME) catalogue maintained by Richardson and Cane lists 106 Earth-directed events, which have been measured in-situ by plasma and field instruments onboard the ACE satellite. We present a statistical investigation of the Earth's thermospheric neutral density response by means of accelerometer measurements collected by the GRACE satellites, which are available for 104 ICMEs in the data set, and its relation to various geomagnetic indices and characteristic ICME parameters such as the impact speed, southward magnetic field strength (Bz). The majority of ICMEs causes a distinct density enhancement in the thermosphere, with up to a factor of eight compared to the pre-event level. We find high correlations between ICME Bz and thermospheric density enhancements (~0.9), while the correlation with the ICME impact speed is somewhat smaller (~0.7). The geomagnetic indices revealing the highest correlations are Dst and SYM-H (~0.9), the lowest correlations are obtained for kp and AE (~0.7), which show a nonlinear relation with the thermospheric density enhancements. Separating the response for the shock sheath region and the magnetic structure of the ICME, we find that the Dst and SYM-H reveal a tighter relation to the Bz minimum in the magnetic structure of the ICME, whereas the polar cap indices show higher correlations with the Bz minimum in the shock sheath region. Since the strength of the Bz component - either in the sheath or the magnetic structure of the ICME - is highly correlated (~0.9) with the neutral density enhancement, we discuss the possibility of satellite orbital decay estimates based on magnetic field measurements at L1, i.e. before the ICME hits the Earth's magnetosphere. This will further stimulate progress in space weather understanding and applications regarding satellite operations.

On 7 January 2014 an X1.2 flare and CME with a radial speed $\approx$2500 km s$^{-1}$ was observed from near an active region close to disk center. This led many forecasters to estimate a rapid arrival at Earth ($\approx$36 hours) and predict a strong geomagnetic storm. However, only a glancing CME arrival was observed at Earth with a transit time of $\approx$49 hours and a $K_{\rm P}$ geomagnetic index of only $3-$. We study the interplanetary propagation of this CME using the ensemble Wang-Sheeley-Arge (WSA)-ENLIL+Cone model, that allows a sampling of CME parameter uncertainties. We explore a series of simulations to isolate the effects of the background solar wind solution, CME shape, tilt, location, size, and speed, and the results are compared with observed in-situ arrivals at Venus, Earth, and Mars. Our results show that a tilted ellipsoid CME shape improves the initial real-time prediction to better reflect the observed in-situ signatures and the geomagnetic storm strength. CME parameters from the Graduated Cylindrical Shell model used as input to WSA--ENLIL+Cone, along with a tilted ellipsoid cloud shape, improve the arrival-time error by 14.5, 18.7, 23.4 hours for Venus, Earth, and Mars respectively. These results highlight that CME orientation and directionality with respect to observatories play an important role in understanding the propagation of this CME, and for forecasting other glancing CME arrivals. This study also demonstrates the importance of three-dimensional CME fitting made possible by multiple viewpoint imaging.

The so-called drag-based model (DBM) simulates analytically the propagation of coronal mass ejections (CMEs) in interplanetary space and allows the prediction of their arrival times and impact speeds at any point in the heliosphere ("target"). The DBM is based on the assumption that beyond a distance of about 20 solar radii from the Sun, the dominant force acting on CMEs is the "aerodynamic" drag force. In the standard form of DBM, the user provisionally chooses values for the model input parameters, by which the kinematics of the CME over the entire Sun--"target" distance range is defined. The choice of model input parameters is usually based on several previously undertaken statistical studies. In other words, the model is used by ad hoc implementation of statistics-based values of the input parameters, which are not necessarily appropriate for the CME under study. Furthermore, such a procedure lacks quantitative information on how well the simulation reproduces the coronagraphically observed kinematics of the CME, and thus does not provide an estimate of the reliability of the arrival prediction. In this paper we advance the DBM by adopting it in a form that employs the CME observations over a given distance range to evaluate the most suitable model input parameters for a given CME by means of the least-squares fitting. Furthermore, the new version of the model automatically responds to any significant change of the conditions in the ambient medium (solar wind speed, density, CME--CME interactions, etc.) by changing the model input parameters according to changes in the CME kinematics. The advanced DBM is shaped in a form that can be readily employed in an operational system for real-time space-weather forecasting by promptly adjusting to a successively expanding observational dataset, thus providing a successively improving prediction of the CME arrival.

We demonstrate the use of machine learning algorithms in combination with segmentation techniques in order to distinguish coronal holes and filaments in SDO/AIA EUV images of the Sun. Based on two coronal hole detection techniques (intensity-based thresholding, SPoCA), we prepared data sets of manually labeled coronal hole and filament channel regions present on the Sun during the time range 2011 - 2013. By mapping the extracted regions from EUV observations onto HMI line-of-sight magnetograms we also include their magnetic characteristics. We computed shape measures from the segmented binary maps as well as first order and second order texture statistics from the segmented regions in the EUV images and magnetograms. These attributes were used for data mining investigations to identify the most performant rule to differentiate between coronal holes and filament channels. We applied several classifiers, namely Support Vector Machine, Linear Support Vector Machine, Decision Tree, and Random Forest and found that all classification rules achieve good results in general, with linear SVM providing the best performances (with a true skill statistic of ~0.90). Additional information from magnetic field data systematically improves the performance across all four classifiers for the SPoCA detection. Since the calculation is inexpensive in computing time, this approach is well suited for applications on real-time data. This study demonstrates how a machine learning approach may help improve upon an unsupervised feature extraction method.

The severe geomagnetic effects of solar storms or coronal mass ejections (CMEs) are to a large degree determined by their propagation direction with respect to Earth. There is a lack of understanding of the processes that determine their non-radial propagation. Here we present a synthesis of data from seven different space missions of a fast CME, which originated in an active region near the disk centre and, hence, a significant geomagnetic impact was forecasted. However, the CME is demonstrated to be channelled during eruption into a direction + 37+/-10 degree (longitude) away from its source region, leading only to minimal geomagnetic effects. In situ observations near Earth and Mars confirm the channelled CME motion, and are consistent with an ellipse shape of the CME-driven shock provided by the new Ellipse Evolution model, presented here. The results enhance our understanding of CME propagation and shape, which can help to improve space weather forecasts.

The unusually large NOAA active region 2192, observed in October 2014, was outstanding in its productivity of major two-ribbon flares without coronal mass ejections. On a large scale, a predominantly north-south oriented magnetic system of arcade fields served as a strong, also lateral, confinement for a series of large two-ribbon flares originating from the core of the active region. The large initial separation of the flare ribbons, together with an almost absent growth in ribbon separation, suggests a confined reconnection site high up in the corona. Based on a detailed analysis of the confined X1.6 flare on October 22, we show how exceptional the flaring of this active region was. We provide evidence for repeated energy release, indicating that the same magnetic field structures were repeatedly involved in magnetic reconnection. We find that a large number of electrons was accelerated to non-thermal energies, revealing a steep power law spectrum, but that only a small fraction was accelerated to high energies. The total non-thermal energy in electrons derived (on the order of 10^25 J) is considerably higher than that in eruptive flares of class X1, and corresponds to about 10\% of the excess magnetic energy present in the active-region corona.

Magnetic-field reconnection is believed to play a fundamental role in magnetized plasma systems throughout the Universe1, including planetary magnetospheres, magnetars and accretion disks around black holes. This letter present extreme ultraviolet and X-ray observations of a solar flare showing magnetic reconnection with a level of clarity not previously achieved. The multi-wavelength extreme ultraviolet observations from SDO/AIA show inflowing cool loops and newly formed, outflowing hot loops, as predicted. RHESSI X-ray spectra and images simultaneously show the appearance of plasma heated to >10 MK at the expected locations. These two data sets provide solid visual evidence of magnetic reconnection producing a solar flare, validating the basic physical mechanism of popular flare models. However, new features are also observed that need to be included in reconnection and flare studies, such as three-dimensional non-uniform, non-steady and asymmetric evolution.

We present an empirical model based on the visible area covered by coronal holes close to the central meridian in order to predict the solar wind speed at 1 AU with a lead time up to four days in advance with a 1hr time resolution. Linear prediction functions are used to relate coronal hole areas to solar wind speed. The function parameters are automatically adapted by using the information from the previous 3 Carrington Rotations. Thus the algorithm automatically reacts on the changes of the solar wind speed during different phases of the solar cycle. The adaptive algorithm has been applied to and tested on SDO/AIA-193A observations and ACE measurements during the years 2011-2013, covering 41 Carrington Rotations. The solar wind speed arrival time is delayed and needs on average 4.02 +/- 0.5 days to reach Earth. The algorithm produces good predictions for the 156 solar wind high speed streams peak amplitudes with correlation coefficients of cc~0.60. For 80% of the peaks, the predicted arrival matches within a time window of 0.5 days of the ACE in situ measurements. The same algorithm, using linear predictions, was also applied to predict the magnetic field strength from coronal hole areas but did not give reliable predictions (cc~0.2).

The fast coronal mass ejection (CME) from 23 July 2012 raised attention due to its extremely short transit time from Sun to 1 AU of less than 21 h. In-situ data from STEREO-A revealed the arrival of a fast forward shock with a speed of more than 2200 km s$^{-1}$ followed by a magnetic structure moving with almost 1900 km s$^{-1}$. We investigate the propagation behavior of the CME shock and magnetic structure with the aim to reproduce the short transit time and high impact speed as derived from in-situ data. We carefully measure the 3D kinematics of the CME using the graduated cylindrical shell model, and obtain a maximum speed of 2580$\pm$280 km s$^{-1}$ for the CME shock and of 2270$\pm$420 km s$^{-1}$ for its magnetic structure. Based on the 3D kinematics, the drag-based model (DBM) reproduces the observational data reasonably well. To successfully simulate the CME shock, we find that the ambient flow speed should be of average value close to the slow solar wind speed (450 km s$^{-1}$), and the initial shock speed at a distance of 30 $R_{\odot}$ should not exceed $\approx$2300 km s$^{-1}$, otherwise it would arrive much too early at STEREO-A. The model results indicate that an extremely low aerodynamic drag force is exerted on the shock, smaller by one order of magnitude compared to the average. As a consequence, the CME hardly decelerates in interplanetary space and maintains its high initial speed. The low aerodynamic drag can only be reproduced when reducing the density of the ambient solar wind flow, in which the massive CME propagates, to $\rho_{\rm sw}$=1-2 cm$^{-3}$ at the distance of 1 AU. This result is consistent with the preconditioning of interplanetary space owing to a previous CME.

Kanzelh\"ohe Observatory (KSO) regularly performs high-cadence full-disk imaging of the solar chromosphere in the H$\alpha$ and CaIIK spectrallines as well as the solar photosphere in white-light. In the frame of ESA's Space Situational Awareness (SSA) programme, a new system for real-time H$\alpha$ data provision and automatic flare detection was developed at KSO. The data and events detected are published in near real-time at ESA's SSA Space Weather portal (http://swe.ssa.esa.int/web/guest/kso-federated). In this paper, we describe the H$\alpha$ instrument, the image recognition algorithms developed, the implementation into the KSO H$\alpha$ observing system and present the evaluation results of the real-time data provision and flare detection for a period of five months. The H$\alpha$ data provision worked in $99.96$% of the images, with a mean time lag between image recording and online provision of 4s. Within the given criteria for the automatic image recognition system (at least three H$\alpha$ images are needed for a positive detection), all flares with an area $\ge$50 micro-hemispheres and located within $60^\circ$ of the Sun's center that occurred during the KSO observing times were detected, in total a number of 87 events. The automatically determined flare importance and brightness classes were correct in $\sim$85%. The mean flare positions in heliographic longitude and latitude were correct within $\sim$1$^\circ$. The median of the absolute differences for the flare start times and peak times from the automatic detections in comparison to the official NOAA (and KSO) visual flare reports were 3 min (1 min).

We continue our study (Grechnev et al. (2013), doi:10.1007/s11207-013-0316-6; Paper I) on the 18 November 2003 geoffective event. To understand possible impact on geospace of coronal transients observed on that day, we investigated their properties from solar near-surface manifestations in extreme ultraviolet, LASCO white-light images, and dynamic radio spectra. We reconcile near-surface activity with the expansion of coronal mass ejections (CMEs) and determine their orientation relative to the earthward direction. The kinematic measurements, dynamic radio spectra, and microwave and X-ray light curves all contribute to the overall picture of the complex event and confirm an additional eruption at 08:07 - 08:20 UT close to the solar disk center presumed in Paper I. Unusual characteristics of the ejection appear to match those expected for a source of the 20 November superstorm but make its detection in LASCO images hopeless. On the other hand, none of the CMEs observed by LASCO seem to be a promising candidate for a source of the superstorm being able to produce, at most, a glancing blow on the Earth's magnetosphere. Our analysis confirms free propagation of shock waves revealed in the event and reconciles their kinematics with "EUV waves" and dynamic radio spectra up to decameters.

This is the first of four companion papers, which analyze a complex eruptive event of 18 November 2003 in AR 10501 and the causes of the largest Solar Cycle 23 geomagnetic storm on 20 November 2003. Analysis of a complete data set, not considered before, reveals a chain of eruptions to which hard X-ray and microwave bursts responded. A filament in AR 10501 was not a passive part of a larger flux rope, as usually considered. The filament erupted and gave origin to a CME. The chain of events was as follows: i) an eruption at 07:29 accompanied by a not reported M1.2 class flare associated with the onset of a first southeastern CME1, which is not responsible for the superstorm; ii) a confined eruption at 07:41 (M3.2 flare) that destabilized the filament; iii) the filament acceleration (07:56); iv) the bifurcation of the eruptive filament that transformed into a large cloud; v) an M3.9 flare in AR 10501 associated to this transformation. The transformation of the filament could be due to its interaction with the magnetic field in the neighborhood of a null point, located at a height of about 100 Mm above the complex formed by ARs 10501, 10503, and their environment. The CORONAS-F/SPIRIT telescope observed the cloud in 304 A as a large Y-shaped darkening, which moved from the bifurcation region to the limb. The masses and kinematics of the cloud and the filament were similar. Remnants of the filament were not observed in the second southwestern CME2, previously regarded as a source of the 20 November superstorm. These facts do not support a simple scenario, in which the interplanetary magnetic cloud is considered as a flux rope formed from a structure initially associated with the pre-eruption filament in AR 10501. Observations suggest a possible additional eruption above the bifurcation region close to solar disk center between 08:07 and 08:17 that could be the source of the superstorm.

In this study, we describe and evaluate shape measures for distinguishing between coronal holes and filament channels as observed in Extreme Ultraviolet (EUV) images of the Sun. For a set of well-observed coronal hole and filament channel regions extracted from SDO/AIA 193\r{A} images we analyze their intrinsic morphology during the period 2011 to 2013, by using well known shape measures from the literature and newly developed geometrical classification methods. The results suggest an asymmetry in the morphology of filament channels giving support for the sheared arcade or weakly twisted flux rope model for filaments. We find that the proposed shape descriptors have the potential to reduce coronal hole classification errors and are eligible for screening techniques in order to improve the forecasting of solar wind high-speed streams from coronal hole observations in solar EUV images.

We present a statistical analysis of 60 strong large-scale EUV wave events that occurred during January 2007 to February 2011 with the STEREO twin spacecraft regarding their kinematical evolution and wave pulse characteristics. For the start velocity, we obtain for the arithmetic mean $312\pm115$ km s$^{-1}$ (within a range of 100$-$630 km s$^{-1}$). For the mean (linear) velocity, the arithmetic mean is $254\pm76$ km s$^{-1}$ (within a range of 130$-$470 km s$^{-1}$). 52 % of all waves under study show a distinct deceleration during their propagation ($a\leq-50$ m s$^{-2}$), the other 48 % are consistent with a constant speed within the uncertainties ($-50\leq a\leq50$ m s$^{-2}$). The start velocity and the acceleration show a strong anticorrelation with $c\approx-0.8$, \textit i.e initially faster events undergo stronger deceleration than slower events. The (smooth) transition between constant propagation for slow events and deceleration in faster events occurs at an EUV wave start velocity of $v\approx230$ km s$^{-1}$, which corresponds well to the fast-mode speed in the quiet corona. These findings provide strong evidence that the EUV waves under study are indeed large-amplitude fast-mode MHD waves. This interpretation is further supported by the correlations obtained between the peak velocity and the peak amplitude, impulsiveness, and build-up time of the disturbance. We obtained the following association rates of EUV wave events to other solar phenomena: 95 % are associated with a coronal mass ejection (CME), 74 % to a solar flare, 15 % to interplanetary type II bursts, and 22 % to coronal type II bursts. These findings are consistent with the interpretation that the associated CMEs are the EUV waves' driving agent.

We present an analysis of the fast coronal mass ejection (CME) of 2012 March 7, which was imaged by both STEREO spacecraft and observed in situ by MESSENGER, Venus Express, Wind and Mars Express. Based on detected arrivals at four different positions in interplanetary space, it was possible to strongly constrain the kinematics and the shape of the ejection. Using the white-light heliospheric imagery from STEREO-A and B, we derived two different kinematical profiles for the CME by applying the novel constrained self-similar expansion method. In addition, we used a drag-based model to investigate the influence of the ambient solar wind on the CME's propagation. We found that two preceding CMEs heading in different directions disturbed the overall shape of the CME and influenced its propagation behavior. While the Venus-directed segment underwent a gradual deceleration (from ~2700 km/s at 15 R_sun to ~1500 km/s at 154 R_sun), the Earth-directed part showed an abrupt retardation below 35 R_sun (from ~1700 to ~900 km/s). After that, it was propagating with a quasi-constant speed in the wake of a preceding event. Our results highlight the importance of studies concerning the unequal evolution of CMEs. Forecasting can only be improved if conditions in the solar wind are properly taken into account and if attention is also paid to large events preceding the one being studied.

Very long baseline interferometry at millimetre/submillimetre wavelengths (mmVLBI) offers the highest achievable spatial resolution at any wavelength in astronomy. The anticipated inclusion of ALMA as a phased array into a global VLBI network will bring unprecedented sensitivity and a transformational leap in capabilities for mmVLBI. Building on years of pioneering efforts in the US and Europe the ongoing ALMA Phasing Project (APP), a US-led international collaboration with MPIfR-led European contributions, is expected to deliver a beamformer and VLBI capability to ALMA by the end of 2014 (APP: Fish et al. 2013, arXiv:1309.3519). This report focuses on the future use of mmVLBI by the international users community from a European viewpoint. Firstly, it highlights the intense science interest in Europe in future mmVLBI observations as compiled from the responses to a general call to the European community for future research projects. A wide range of research is presented that includes, amongst others: - Imaging the event horizon of the black hole at the centre of the Galaxy - Testing the theory of General Relativity an/or searching for alternative theories - Studying the origin of AGN jets and jet formation - Cosmological evolution of galaxies and BHs, AGN feedback - Masers in the Milky Way (in stars and star-forming regions) - Extragalactic emission lines and astro-chemistry - Redshifted absorption lines in distant galaxies and study of the ISM and circumnuclear gas - Pulsars, neutron stars, X-ray binaries - Testing cosmology - Testing fundamental physical constants

Forecasting the in situ properties of coronal mass ejections (CMEs) from remote images is expected to strongly enhance predictions of space weather, and is of general interest for studying the interaction of CMEs with planetary environments. We study the feasibility of using a single heliospheric imager (HI) instrument, imaging the solar wind density from the Sun to 1 AU, for connecting remote images to in situ observations of CMEs. We compare the predictions of speed and arrival time for 22 CMEs (in 2008-2012) to the corresponding interplanetary coronal mass ejection (ICME) parameters at in situ observatories (STEREO PLASTIC/IMPACT, Wind SWE/MFI). The list consists of front- and backsided, slow and fast CMEs (up to $2700 \: km \: s^{-1}$). We track the CMEs to $34.9 \pm 7.1$ degrees elongation from the Sun with J-maps constructed using the SATPLOT tool, resulting in prediction lead times of $-26.4 \pm 15.3$ hours. The geometrical models we use assume different CME front shapes (Fixed-$\Phi$, Harmonic Mean, Self-Similar Expansion), and constant CME speed and direction. We find no significant superiority in the predictive capability of any of the three methods. The absolute difference between predicted and observed ICME arrival times is $8.1 \pm 6.3$ hours ($rms$ value of 10.9h). Speeds are consistent to within $284 \pm 288 \: km \: s^{-1}$. Empirical corrections to the predictions enhance their performance for the arrival times to $6.1 \pm 5.0$ hours ($rms$ value of 7.9h), and for the speeds to $53 \pm 50 \: km \: s^{-1}$. These results are important for Solar Orbiter and a space weather mission positioned away from the Sun-Earth line.

Su et al. 2012 proposed a new explanation for filament formation and eruption, where filament barbs are rotating magnetic structures driven by underlying vortices on the surface. Such structures have been noticed as tornado-like prominences when they appear above the limb. They may play a key role as the source of plasma and twist in filaments. However, no observations have successfully distinguished rotational motion of the magnetic structures in tornado-like prominences from other motions such as oscillation and counter-streaming plasma flows. Here we report evidence of rotational motions in a tornado-like prominence. The spectroscopic observations in two coronal lines were obtained from a specifically designed Hinode/EIS observing program. The data revealed the existence of both cold and million-degree-hot plasma in the prominence leg, supporting the so-called "the prominence-corona transition region". The opposite velocities at the two sides of the prominence and their persistent time evolution, together with the periodic motions evident in SDO/AIA dark structures, indicate a rotational motion of both cold and hot plasma with a speed of $\sim$5 km s$^{-1}$.

We present a detailed study of the interaction process of two coronal mass ejections (CMEs) successively launched on 2011 February 14 (CME1) and 2011 February 15 (CME2). Reconstructing the 3D shape and evolution of the flux ropes we verify that the two CMEs interact. The frontal structure of both CMEs measured along different position angles (PA) over the entire latitudinal extent, reveals differences in the kinematics for the interacting flanks and the apexes. The interaction process is strongly PA-dependent in terms of timing as well as kinematical evolution. The central interaction occurs along PA-100{\deg}, which shows the strongest changes in kinematics. During interaction, CME1 accelerates from ~400 km/s to ~700 km/s and CME2 decelerates from ~1300 km/s to ~600 km/s. Our results indicate that a simplified scenario like inelastic collision may not be sufficient to describe the CME-CME interaction. Magnetic field structures of the intertwining flux ropes as well as momentum transfer due to shocks play an important role in the interaction process.

We explore the link between solar energetic particles (SEPs) observed at 1 AU and large-scale disturbances propagating in the solar corona, named after the Extreme ultraviolet Imaging Telescope (EIT) as EIT waves, which trace the lateral expansion of a coronal mass ejection (CME). A comprehensive search for SOHO/EIT waves was carried out for 179 SEP events during Solar Cycle 23 (1997-2006). 87% of the SEP events were found to be accompanied by EIT waves. In order to test if the EIT waves play a role in the SEP acceleration, we compared their extrapolated arrival time at the footpoint of the Parker spiral with the particle onset in the 26 eastern SEP events that had no direct magnetic connection to the Earth. We find that the onset of proton events was generally consistent with this scenario. However, in a number of cases the first near-relativistic electrons were detected too early. Furthermore, the electrons had in general only weakly anisotropic pitch-angle distributions. This poses a problem for the idea that the SEPs were accelerated by the EIT wave or in any other spatially confined region in the low corona. The presence of weak electron anisotropies in SEP events from the eastern hemisphere suggests that transport processes in interplanetary space, including cross-field diffusion, play a role in giving the SEPs access to a broad range of helio-longitudes.

We study a filament eruption, two-ribbon flare, and coronal mass ejection (CME) that occurred in Active Region NOAA 10898 on 6 July 2006. The filament was located South of a strong sunspot that dominated the region. In the evolution leading up to the eruption, and for some time after it, a counter-clockwise rotation of the sunspot of about 30 degrees was observed. We suggest that the rotation triggered the eruption by progressively expanding the magnetic field above the filament. To test this scenario, we study the effect of twisting the initially potential field overlying a pre-existing flux-rope, using three-dimensional zero-$\beta$ MHD simulations. We first consider a relatively simple and symmetric system, and then study a more complex and asymmetric magnetic configuration, whose photospheric flux distribution and coronal structure are guided by the observations and a potential field extrapolation. In both cases, we find that the twisting leads to the expansion of the overlying field. As a consequence of the progressively reduced magnetic tension, the flux-rope quasi-statically adapts to the changed environmental field, rising slowly. Once the tension is sufficiently reduced, a distinct second phase of evolution occurs where the flux-rope enters an unstable regime characterized by a strong acceleration. Our simulations thus suggest a new mechanism for the triggering of eruptions in the vicinity of rotating sunspots.

Knowledge about the background solar wind plays a crucial role in the framework of space weather forecasting. In-situ measurements of the background solar wind are only available for a few points in the heliosphere where spacecraft are located, therefore we have to rely on heliospheric models to derive the distribution of solar wind parameters in interplanetary space. We test the performance of different solar wind models, namely Magnetohydrodynamic Algorithm outside a Sphere/ENLIL (MAS/ENLIL), Wang-Sheeley-Arge/ENLIL (WSA/ENLIL), and MAS/MAS, by comparing model results with in-situ measurements from spacecraft located at 1 AU distance to the Sun (ACE, Wind). To exclude the influence of interplanetary coronal mass ejections (ICMEs), we chose the year 2007 as a time period with low solar activity for our comparison. We found that the general structure of the background solar wind is well reproduced by all models. The best model results were obtained for the parameter solar wind speed. However, the predicted arrival times of high-speed solar wind streams have typical uncertainties of the order of about one day. Comparison of model runs with synoptic magnetic maps from different observatories revealed that the choice of the synoptic map significantly affects the model performance.

The Atmospheric Imaging Assembly onboard the Solar Dynamics Observatory observed a coronal mass ejection with an embedded filament on 2011 February 24, reavealing quasi-periodic vortex-like structures at the northern side of the filament boundary with a wavelength of approximately 14.4 Mm and a propagation speed of about 310 +- 20 km/s. These structures could result from the Kelvin-Helmholtz instability occurring on the boundary. We perform 2.5D numerical simulations of the Kelvin-Helmholtz instability and compare the simulated characteristic properties of the instability with the observations, where we obtain qualitative as well as quantitative accordance. We study the absence of Kelvin-Helmholtz vortex-like structures on the southern side of the filament boundary and find that a magnetic field component parallel to the boundary with a strength of about 20% of the total magnetic field has stabilizing effects resulting in an asymmetric development of the instability.

Using combined STEREO-A and STEREO-B EUVI, COR1 and COR2 data, we derive deprojected CME kinematics and CME `true' mass evolutions for a sample of 25 events that occurred during December 2007 to April 2011. We develop a fitting function to describe the CME mass evolution with height. The function considers both the effect of the coronagraph occulter, at the beginning of the CME evolution, and an actual mass increase. The latter becomes important at about 10Rs to 15Rs and is assumed to mostly contribute up to 20Rs. The mass increase ranges from 2% to 6% per Rs and, is positively correlated to the total CME mass. Due to the combination of COR1 and COR2 mass measurements, we are able to estimate the `true' mass value for very low coronal heights (< 3Rs). Based on the deprojected CME kinematics and initial ejected masses, we derive the kinetic energies and propelling forces acting on the CME in the low corona (< 3Rs). The derived CME kinetic energies range between 1-66*10^23 J, and the forces range between 2.2-510*10^14 N.

Numerical simulations of magnetosonic wave formation driven by an expanding cylindrical piston are performed to get better physical insight into the initiation and evolution of large-scale coronal waves. Several very basic initial configurations are employed to analyze intrinsic characteristics of the MHD wave formation that do not depend on specific properties of the environment. It turns out that these simple initial configurations result in piston/wave morphologies and kinematics that reproduce common characteristics of coronal waves. In the initial stage the wave and the expanding source-region cannot be clearly resolved. During the acceleration stage of the source-region inflation, the wave is driven by the piston expansion, so its amplitude and phase-speed increase, whereas the wavefront profile steepens. At a given point, a discontinuity forms in the wavefront profile. The time/distance required for the shock formation is shorter for a more impulsive source-region expansion. After the piston stops, the wave amplitude and phase-speed start decreasing. During the expansion, most of the source region becomes strongly rarified, which reproduces the coronal dimming left behind the eruption. On the other hand, the density increases at the source-region boundary, and stays enhanced even after the expansion stops, which might explain stationary brightenings that are sometimes observed at the edges of the erupted coronal structure. In addition, in the rear of the wave a weak density depletion develops, trailing the wave, which is sometimes observed as weak transient coronal dimming. Finally, we find a well defined relationship between the impulsiveness of the source-region expansion and the wave amplitude and phase speed. The results for the cylindrical piston are also compared with the outcome for a planar wave, to find out how different geometries affect the evolution of the wave.

In this study we use a numerical simulation of an artificial coronal mass ejection (CME) to validate a method for calculating propagation directions and kinematical profiles of interplanetary CMEs (ICMEs). In this method observations from heliospheric images are constrained with in-situ plasma and field data at 1 AU. These data are used to convert measured ICME elongations into distance by applying the Harmonic Mean approach that assumes a spherical shape of the ICME front. We use synthetic white-light images, similar as observed by STEREO-A/HI, for three different separation angles between remote and in-situ spacecraft, of 30{\deg}, 60{\deg}, and 90{\deg}. To validate the results of the method they are compared to the apex speed profile of the modeled ICME, as obtained from a top view. This profile reflects the "true" apex kinematics since it is not affected by scattering or projection effects. In this way it is possible to determine the accuracy of the method for revealing ICME propagation directions and kinematics. We found that the direction obtained by the constrained Harmonic Mean method is not very sensitive to the separation angle (30{\deg} sep: \phi = W7; 60{\deg} sep: \phi = W12; 90{\deg} sep: \phi = W15; true dir.: E0/W0). For all three cases the derived kinematics are in a relatively good agreement with the real kinematics. The best consistency is obtained for the 30{\deg} case, while with growing separation angle the ICME speed at 1 AU is increasingly overestimated (30{\deg} sep: \Delta V_arr ~-50 km/s, 60{\deg} sep: \Delta V_arr ~+75 km/s, 90{\deg} sep: \Delta V_arr ~+125 km/s). Especially for future L4/L5 missions the 60{\deg} separation case is highly interesting in order to improve space weather forecasts.

We present multi-point in situ observations of a complex sequence of coronal mass ejections (CMEs) which may serve as a benchmark event for numerical and empirical space weather prediction models. On 2010 August 1, instruments on various space missions (Solar Dynamics Observatory/ Solar and Heliospheric Observatory/Solar-TErrestrial-RElations-Observatory) monitored several CMEs originating within tens of degrees from solar disk center. We compare their imprints on four widely separated locations, spanning 120 degree in heliospheric longitude, with radial distances from the Sun ranging from MESSENGER (0.38 AU) to Venus Express (VEX, at 0.72 AU) to Wind, ACE and ARTEMIS near Earth, and STEREO-B close to 1 AU. Calculating shock and flux rope parameters at each location points to a non-spherical shape of the shock, and shows the global configuration of the interplanetary coronal mass ejections (ICMEs), which have interacted, but do not seem to have merged. VEX and STEREO-B observed similar magnetic flux ropes (MFRs), in contrast to structures at Wind. The geomagnetic storm was intense, reaching two minima in the Dst index (~ -100 nT), caused by the sheath region behind the shock and one of two observed MFRs. MESSENGER received a glancing blow of the ICMEs, and the events missed STEREO-A entirely. The observations demonstrate how sympathetic solar eruptions may immerse at least 1/3 of the heliosphere in the ecliptic with their distinct plasma and magnetic field signatures. We also emphasize the difficulties in linking the local views derived from single-spacecraft observations to a consistent global picture, pointing to possible alterations from the classical picture of ICMEs.

In 2010 May 23-24, SDO observed the launch of two successive coronal mass ejections (CMEs), which were subsequently tracked by the SECCHI suite onboard STEREO. Using the COR2 coronagraphs and the heliospheric imagers (HIs), the initial direction of both CMEs is determined to be slightly west of the Sun-Earth line. We derive the CME kinematics, including the evolution of the CME expansion until 0.4 AU. We find that, during the interaction, the second CME decelerates from a speed above 500 km/s to 380 km/s the speed of the leading edge of the first CME. STEREO observes a complex structure composed of two different bright tracks in HI2-A but only one bright track in HI2-B. In situ measurements from Wind show an "isolated" ICME, with the geometry of a flux rope preceded by a shock. Measurements in the sheath are consistent with draping around the transient. By combining remote-sensing and in situ measurements, we determine that this event shows a clear instance of deflection of two CMEs after their collision, and we estimate the deflection of the first CME to be about 10 degrees towards the Sun-Earth line. The arrival time, arrival speed and radius at Earth of the first CME are best predicted from remote-sensing observations taken before the collision of the CMEs. Due to the over-expansion of the CME after the collision, there are few, if any, signs of interaction in in situ measurements. This study illustrates that complex interactions during the Sun-to-Earth propagation may not be revealed by in situ measurements alone.

Solar magnetized "tornadoes", a phenomenon discovered in the solar atmosphere, appear as tornado-like structures in the corona but root in the photosphere. Like other solar phenomena, solar tornadoes are a feature of magnetized plasma and therefore differ distinctly from terrestrial tornadoes. Here we report the first analysis of solar "tornadoes" {Two papers which focused on different aspect of solar tornadoes were published in the Astrophysical Journal Letters (Li et al. 2012) and Nature (Wedemeyer-B\"ohm et al. 2012), respectively, during the revision of this Letter.}. A detailed case study of two events indicates that they are rotating vertical magnetic structures probably driven by underlying vortex flows in the photosphere. They usually exist as a group and relate to filaments/prominences, another important solar phenomenon whose formation and eruption are still mysteries. Solar tornadoes may play a distinct role in the supply of mass and twists to filaments. These findings could lead to a new explanation to filament formation and eruption.

We study the 17 January 2010 flare-CME-wave event by using STEREO/SECCHI EUVI and COR1 data. The observational study is combined with an analytic model which simulates the evolution of the coronal-wave phenomenon associated with the event. From EUV observations, the wave signature appears to be dome shaped having a component propagating on the solar surface (v~280 km s-1) as well as off-disk (v~600 km s-1) away from the Sun. The off-disk dome of the wave consists of two enhancements in intensity, which conjointly develop and can be followed up to white-light coronagraph images. Applying an analytic model, we derive that these intensity variations belong to a wave-driver system with a weakly shocked wave, initially driven by expanding loops, which are indicative of the early evolution phase of the accompanying CME. We obtain the shock standoff distance between wave and driver from observations as well as from model results. The shock standoff distance close to the Sun (<0.3 Rs above the solar surface) is found to rapidly increase with values of ~0.03-0.09 Rs which give evidence of an initial lateral (over-)expansion of the CME. The kinematical evolution of the on-disk wave could be modeled using input parameters which require a more impulsive driver (t=90 s, a=1.7 km s-2) compared to the off-disk component (t=340 s, a=1.5 km s-2).

Using high time cadence images from the STEREO EUVI, COR1 and COR2 instruments, we derived detailed kinematics of the main acceleration stage for a sample of 95 CMEs in comparison with associated flares and filament eruptions. We found that CMEs associated with flares reveal on average significantly higher peak accelerations and lower acceleration phase durations, initiation heights and heights, at which they reach their peak velocities and peak accelerations. This means that CMEs that are associated with flares are characterized by higher and more impulsive accelerations and originate from lower in the corona where the magnetic field is stronger. For CMEs that are associated with filament eruptions we found only for the CME peak acceleration significantly lower values than for events which were not associated with filament eruptions. The flare rise time was found to be positively correlated with the CME acceleration duration, and negatively correlated with the CME peak acceleration. For the majority of the events the CME acceleration starts before the flare onset (for 75% of the events) and the CME accleration ends after the SXR peak time (for 77% of the events). In ~60% of the events, the time difference between the peak time of the flare SXR flux derivative and the peak time of the CME acceleration is smaller than \pm5 min, which hints at a feedback relationship between the CME acceleration and the energy release in the associated flare due to magnetic reconnection.

We investigate the relationship between the main acceleration phase of coronal mass ejections (CMEs) and the particle acceleration in the associated flares as evidenced in RHESSI non-thermal X-rays for a set of 37 impulsive flare-CME events. CME peak velocity and peak acceleration yield distinct correlations with various parameters characterizing the flare-accelerated electron spectra. The highest correlation coefficient is obtained for the relation of the CME peak velocity and the total energy in accelerated electrons (c = 0.85), supporting the idea that the acceleration of the CME and the particle acceleration in the associated flare draw their energy from a common source, probably magnetic reconnection in the current sheet behind the erupting structure. In general, the CME peak velocity shows somewhat higher correlations with the non-thermal flare parameters than the CME peak acceleration, except for the spectral index of the accelerated electron spectrum which yields a higher correlation with the CME peak acceleration (c = -0.6), indicating that the hardness of the flare-accelerated electron spectrum is tightly coupled to the impulsive acceleration process of the rising CME structure. We also obtained high correlations between the CME initiation height $h_0$ and the non-thermal flare parameters, with the highest correlation of $h_0$ to the spectral index of flare-accelerated electrons (c = 0.8). This means that CMEs erupting at low coronal heights, i.e.\ in regions of stronger magnetic fields, are accompanied with flares which are more efficient to accelerate electrons to high energies. In the majority of events (80%), the non-thermal flare emission starts after the CME acceleration (6 min), giving a current sheet length at the onset of magnetic reconnection of 21 \pm 7 Mm. The flare HXR peaks are well synchronized with the peak of the CME acceleration profile.

We investigate the interaction of three consecutive large-scale coronal waves with a polar coronal hole, simultaneously observed on-disk by the Solar TErrestrial Relations Observatory (STEREO)-A spacecraft and on the limb by the PRoject for On-Board Autonomy 2 (PROBA2) spacecraft on January 27, 2011. All three extreme-ultraviolet(EUV) waves originate from the same active region NOAA 11149 positioned at N30E15 in the STEREO-A field-of-view and on the limb in PROBA2. We derive for the three primary EUV waves start velocities in the range of ~310 km/s for the weakest up to ~500 km/s for the strongest event. Each large-scale wave is reflected at the border of the extended coronal hole at the southern polar region. The average velocities of the reflected waves are found to be smaller than the mean velocities of their associated direct waves. However, the kinematical study also reveals that in each case the end velocity of the primary wave matches the initial velocity of the reflected wave. In all three events the primary and reflected waves obey the Huygens-Fresnel principle, as the incident angle with ~10{\deg} to the normal is of the same size as the angle of reflection. The correlation between the speed and the strength of the primary EUV waves, the homologous appearance of both the primary and the reflected waves, and in particular the EUV wave reflections themselves implicate that the observed EUV transients are indeed nonlinear large-amplitude MHD waves.

We present a new approach to combine remote observations and in situ data by STEREO/HI and Wind, respectively, to derive the kinematics and propagation directions of interplanetary coronal mass ejections (ICMEs). We used two methods, Fixed-Phi and Harmonic Mean, to convert ICME elongations into distance, and constrained the ICME direction such that the ICME distance-time and velocity-time profiles are most consistent with in situ measurements of the arrival time and velocity. The derived velocity-time functions from the Sun to 1 AU for the three events under study (1-6 June 2008, 13-18 February 2009, 3-5 April 2010) do not show strong differences for the two extreme geometrical assumptions of a wide ICME with a circular front (Harmonic Mean) or an ICME of small spatial extent in the ecliptic (Fixed-Phi). Due to the geometrical assumptions, Harmonic Mean delivers the propagation direction further away from the observing spacecraft with a mean difference of ~25 degree.

We study the interaction of two successive coronal mass ejections (CMEs) during the 2010 August 1 events using STEREO/SECCHI COR and HI data. We obtain the direction of motion for both CMEs by applying several independent reconstruction methods and find that the CMEs head in similar directions. This provides evidence that a full interaction takes place between the two CMEs that can be observed in the HI1 field-of-view. The full de-projected kinematics of the faster CME from Sun to Earth is derived by combining remote observations with in situ measurements of the CME at 1 AU. The speed profile of the faster CME (CME2; ~1200 km/s) shows a strong deceleration over the distance range at which it reaches the slower, preceding CME (CME1; ~700 km/s). By applying a drag-based model we are able to reproduce the kinematical profile of CME2 suggesting that CME1 represents a magnetohydrodynamic obstacle for CME2 and that, after the interaction, the merged entity propagates as a single structure in an ambient flow of speed and density typical for quiet solar wind conditions. Observational facts show that magnetic forces may contribute to the enhanced deceleration of CME2. We speculate that the increase in magnetic tension and pressure, when CME2 bends and compresses the magnetic field lines of CME1, increases the efficiency of drag.

The successive coronal mass ejections (CMEs) from 2010 July 30 - August 1 present us the first opportunity to study CME-CME interactions with unprecedented heliospheric imaging and in situ observations from multiple vantage points. We describe two cases of CME interactions: merging of two CMEs launched close in time and overtaking of a preceding CME by a shock wave. The first two CMEs on August 1 interact close to the Sun and form a merged front, which then overtakes the July 30 CME near 1 AU, as revealed by wide-angle imaging observations. Connections between imaging observations and in situ signatures at 1 AU suggest that the merged front is a shock wave, followed by two ejecta observed at Wind which seem to have already merged. In situ measurements show that the CME from July 30 is being overtaken by the shock at 1 AU and is significantly compressed, accelerated and heated. The interaction between the preceding ejecta and shock also results in variations in the shock strength and structure on a global scale, as shown by widely separated in situ measurements from Wind and STEREO B. These results indicate important implications of CME-CME interactions for shock propagation, particle acceleration and space weather forecasting.

We present plasma diagnostics of an EIT wave observed with high cadence in Hinode/EIS sit-and-stare spectroscopy and SDO/AIA imagery obtained during the HOP-180 observing campaign on 2011 February 16. At the propagating EIT wave front, we observe downward plasma flows in the EIS Fe XII, Fe XIII, and Fe XVI spectral lines (log T ~ 6.1-6.4) with line-of-sight (LOS) velocities up to 20 km/s. These red-shifts are followed by blue-shifts with upward velocities up to -5 km/s indicating relaxation of the plasma behind the wave front. During the wave evolution, the downward velocity pulse steepens from a few km/s up to 20 km/s and subsequently decays, correlated with the relative changes of the line intensities. The expected increase of the plasma densities at the EIT wave front estimated from the observed intensity increase lies within the noise level of our density diagnostics from EIS XIII 202/203 AA line ratios. No significant LOS plasma motions are observed in the He II line, suggesting that the wave pulse was not strong enough to perturb the underlying chromosphere. This is consistent with the finding that no Halpha Moreton wave was associated with the event. The EIT wave propagating along the EIS slit reveals a strong deceleration of a ~ -540 m/s2 and a start velocity of v0 ~ 590 km/s. These findings are consistent with the passage of a coronal fast-mode MHD wave, pushing the plasma downward and compressing it at the coronal base.

We study three CME/ICME events (2008 June 1-6, 2009 February 13-18, 2010 April 3-5) tracked from Sun to 1 AU in remote-sensing observations of STEREO Heliospheric Imagers and in situ plasma and magnetic field measurements. We focus on the ICME propagation in IP space that is governed by two forces, the propelling Lorentz force and the drag force. We address the question at which heliospheric distance range the drag becomes dominant and the CME gets adjusted to the solar wind flow. To this aim we analyze speed differences between ICMEs and the ambient solar wind flow as function of distance. The evolution of the ambient solar wind flow is derived from ENLIL 3D MHD model runs using different solar wind models, namely Wang-Sheeley-Arge (WSA) and MHD-Around-A-Sphere (MAS). Comparing the measured CME kinematics with the solar wind models we find that the CME speed gets adjusted to the solar wind speed at very different heliospheric distances in the three events under study: from below 30 Rs, to beyond 1 AU, depending on the CME and ambient solar wind characteristics. ENLIL can be used to derive important information about the overall structure of the background solar wind, providing more reliable results during times of low solar activity than during times of high solar activity. The results from this study enable us to get a better insight into the forces acting on CMEs over the IP space distance range, which is an important prerequisite in order to predict their 1 AU transit times.

We investigate the early phase of the 13 February 2009 coronal mass ejection (CME). Observations with the twin STEREO spacecraft in quadrature allow us to compare for the first time in one and the same event the temporal evolution of coronal EUV dimmings, observed simultaneously on-disk and above the limb. We find that these dimmings are synchronized and appear during the impulsive acceleration phase of the CME, with the highest EUV intensity drop occurring a few minutes after the maximum CME acceleration. During the propagation phase two confined, bipolar dimming regions, appearing near the footpoints of a pre-flare sigmoid structure, show an apparent migration away from the site of the CME-associated flare. Additionally, they rotate around the 'center' of the flare site, i.e., the configuration of the dimmings exhibits the same 'sheared-to-potential' evolution as the postflare loops. We conclude that the motion pattern of the twin dimmings reflects not only the eruption of the flux rope, but also the ensuing stretching of the overlying arcade. Finally, we find that: (1) the global-scale dimmings, expanding from the source region of the eruption, propagate with a speed similar to that of the leaving CME front; (2) the mass loss occurs mainly during the period of strongest CME acceleration. Two hours after the eruption Hinode/EIS observations show no substantial plasma outflow, originating from the 'open' field twin dimming regions.

We present an overview of solar flares and associated phenomena, drawing upon a wide range of observational data primarily from the RHESSI era. Following an introductory discussion and overview of the status of observational capabilities, the article is split into topical sections which deal with different areas of flare phenomena (footpoints and ribbons, coronal sources, relationship to coronal mass ejections) and their interconnections. We also discuss flare soft X-ray spectroscopy and the energetics of the process. The emphasis is to describe the observations from multiple points of view, while bearing in mind the models that link them to each other and to theory. The present theoretical and observational understanding of solar flares is far from complete, so we conclude with a brief discussion of models, and a list of missing but important observations.

We use high time cadence images acquired by the STEREO EUVI and COR instruments to study the evolution of coronal mass ejections (CMEs), from their initiation, through the impulsive acceleration to the propagation phase. For a set of 95 CMEs we derived detailed height, velocity and acceleration profiles and statistically analysed characteristic CME parameters: peak acceleration, peak velocity, acceleration duration, initiation height, height at peak velocity, height at peak acceleration and size of the CME source region. The CME peak accelerations derived range from 20 to 6800 m s^2 and are inversely correlated to the acceleration duration and to the height at peak acceleration. 74% of the events reach their peak acceleration at heights below 0.5 Rsun. CMEs which originate from compact sources low in the corona are more impulsive and reach higher peak accelerations at smaller heights. These findings can be explained by the Lorentz force, which drives the CME accelerations and decreases with height and CME size.

A goal of the NASA STEREO mission is to study the feasibility of forecasting the direction, arrival time and internal structure of solar coronal mass ejections (CMEs) from a vantage point outside the Sun-Earth line. Through a case study, we discuss the arrival time calculation of interplanetary CMEs (ICMEs) in the ecliptic plane using data from STEREO/SECCHI at large elongations from the Sun in combination with different geometric assumptions about the ICME front shape (Fixed-\Phi (FP): a point and harmonic Mean (HM): a circle). These forecasting techniques use single-spacecraft imaging data and are based on the assumptions of constant velocity and direction. We show that for the slow (350 km/s) ICME on 2009 February 13-18, observed at quadrature by the two STEREO spacecraft, the results for the arrival time given by the HM approximation are more accurate by 12 hours than those for FP in comparison to in situ observations of solar wind plasma and magnetic field parameters by STEREO/IMPACT/PLASTIC, and by 6 hours for the arrival time at Venus Express (MAG). We propose that the improvement is directly related to the ICME front shape being more accurately described by HM for an ICME with a low inclination of its symmetry axis to the ecliptic. In this case the ICME has to be tracked to > 30{\deg} elongation to get arrival time errors < 5 hours. A newly derived formula for calculating arrival times with the HM method is also useful for a triangulation technique assuming the same geometry.

The kinematical evolution of four EUV waves, well observed by the Extreme UltraViolet Imager (EUVI) onboard the Solar-Terrestrial Relations Observatory (STEREO), is studied by visually tracking the wave fronts as well as by a semiautomatized perturbation profile method leading to results matching each other within the error limits. The derived mean velocities of the events under study lie in the range of 220-350 km/s. The fastest of the events (May 19, 2007) reveals a significant deceleration of \approx -190 m s-2 while the others are consistent with a constant velocity during the wave propagation. The evolution of the maximum intensity values reveals initial intensification by 20 up to 70%, and decays to original levels within 40-60 min, while the width at half maximum and full maximum of the perturbation profiles are broadening by a factor of 2 - 4. The integral below the perturbation profile remains basically constant in two cases, while it shows a decrease by a factor of 3 - 4 in the other two cases. From the peak perturbation amplitudes we estimate the corresponding magnetosonic Mach numbers Mms which are in the range of 1.08-1.21. The perturbation profiles reveal three distinct features behind the propagating wave fronts: coronal dimmings, stationary brightenings and rarefaction regions. All of them appear after the wave passage and are only slowly fading away. Our findings indicate that the events under study are weak shock fast-mode MHD waves initiated by the CME lateral expansion.

We study the kinematical characteristics and 3D geometry of a large-scale coronal wave that occurred in association with the 26 April 2008 flare-CME event. The wave was observed with the EUVI instruments aboard both STEREO spacecraft (STEREO-A and STEREO-B) with a mean speed of ~240 km/s. The wave is more pronounced in the eastern propagation direction, and is thus, better observable in STEREO-B images. From STEREO-B observations we derive two separate initiation centers for the wave, and their locations fit with the coronal dimming regions. Assuming a simple geometry of the wave we reconstruct its 3D nature from combined STEREO-A and STEREO-B observations. We find that the wave structure is asymmetric with an inclination towards East. The associated CME has a deprojected speed of ~750+/-50 km/s, and shows a non-radial outward motion towards the East with respect to the underlying source region location. Applying the forward fitting model developed by Thernisien, Howard, and Vourlidas (2006), we derive the CME flux rope position on the solar surface to be close to the dimming regions. We conclude that the expanding flanks of the CME most likely drive and shape the coronal wave.

On 2010 April 28 and 29, the Solar TErrestrial Relations Observatory B/Extreme Ultraviolet Imager observed four homologous large-scale coronal waves, the so-called EIT-waves, within 8 hr. All waves emerged from the same source active region, were accompanied by weak flares and faint coronal mass ejections, and propagated into the same direction at constant velocities in the range of ~220-340 km s-1. The last of these four coronal wave events was the strongest and fastest, with a velocity of 337 +/- 31 km s-1 and a peak perturbation amplitude of ~1.24, corresponding to a magnetosonic Mach number of Mms ~ 1.09. The magnetosonic Mach numbers and velocities of the four waves are distinctly correlated, suggestive of the nonlinear fast-mode magnetosonic wave nature of the events. We also found a correlation between the magnetic energy buildup times and the velocity and magnetosonic Mach number.

We study spectroscopic observations of chromospheric evaporation mass flows in comparison to the energy input by electron beams derived from hard X-ray data for the white-light M2.5 flare of 2006 July 6. The event was captured in high cadence spectroscopic observing mode by SOHO/CDS combined with high-cadence imaging at various wavelengths in the visible, EUV and X-ray domain during the joint observing campaign JOP171. During the flare peak, we observe downflows in the He\,{\sc i} and O\,{\sc v} lines formed in the chromosphere and transition region, respectively, and simultaneous upflows in the hot coronal Si~{\sc xii} line. The energy deposition rate by electron beams derived from RHESSI hard X-ray observations is suggestive of explosive chromospheric evaporation, consistent with the observed plasma motions. However, for a later distinct X-ray burst, where the site of the strongest energy deposition is exactly located on the CDS slit, the situation is intriguing. The O\,{\sc v} transition region line spectra show the evolution of double components, indicative of the superposition of a stationary plasma volume and upflowing plasma elements with high velocities (up to 280~km~s$^{-1}$) in single CDS pixels on the flare ribbon. However, the energy input by electrons during this period is too small to drive explosive chromospheric evaporation. These unexpected findings indicate that the flaring transition region is much more dynamic, complex, and fine-structured than is captured in single-loop hydrodynamic simulations.

We present first observations of a dome-shaped large-scale EUV coronal wave, recorded by the EUVI instrument onboard STEREO-B on January 17, 2010. The main arguments that the observed structure is the wave dome (and not the CME) are: a) the spherical form and sharpness of the dome's outer edge and the erupting CME loops observed inside the dome; b) the low-coronal wave signatures above the limb perfectly connecting to the on-disk signatures of the wave; c) the lateral extent of the expanding dome which is much larger than that of the coronal dimming; d) the associated high-frequency type II burst indicating shock formation low in the corona. The velocity of the upward expansion of the wave dome ($v \sim 650$ km s$^{-1}$) is larger than that of the lateral expansion of the wave ($v \sim 280$ km s$^{-1}$), indicating that the upward dome expansion is driven all the time, and thus depends on the CME speed, whereas in the lateral direction it is freely propagating after the CME lateral expansion stops. We also examine the evolution of the perturbation characteristics: First the perturbation profile steepens and the amplitude increases. Thereafter, the amplitude decreases with r$^{-2.5 \pm 0.3}$, the width broadens, and the integral below the perturbation remains constant. Our findings are consistent with the spherical expansion and decay of a weakly shocked fast-mode MHD wave.

Using the potential of two unprecedented missions, STEREO and RHESSI, we study three well observed fast CMEs that occurred close to the limb together with their associated high energy flare emissions in terms of RHESSI HXR spectra and flux evolution. From STEREO/EUVI and STEREO/COR1 data the full CME kinematics of the impulsive acceleration phase up to 4 Rs is measured with a high time cadence of less equal 2.5 min. For deriving CME velocity and acceleration we apply and test a new algorithm based on regularization methods. The CME maximum acceleration is achieved at heights h < 0.4 Rs, the peak velocity at h < 2.1 Rs (in one case as small as 0.5 Rs). We find that the CME acceleration profile and the flare energy release as evidenced in the RHESSI hard X-ray flux evolve in a synchronized manner. These results support the standard flare/CME model which is characterized by a feed-back relationship between the large-scale CME acceleration process and the energy release in the associated flare.

The present paper reviews results derived from statistical studies on solar activity indices. The prolonged minimum phase of cycle 23 raised the question of peculiarities inherent in cycle 23. The most important solar activity index is the relative sunspot number and though most of other indices are closely related, shifts are obtained between their peak activity of the order of 1-2 years. These shifts reveal a 22-yr pattern which can be attributed to solar interior or dynamo related processes. The minimum phase of cycle 23 is not found to be exceptional. Investigating the relative sunspot numbers over the past 150 years, solar cycles of more prolonged minima are observed. Since 1920 solar activity is quite high ('modern maximum') and cycle 23 might be the herald of the end of this phase.

We study the well pronounced Moreton wave that occurred in as- sociation with the X17.2 are/CME event of October 28, 2003. This Moreton wave is striking for its global propagation and two separate wave centers, which implies that two waves were launched simultane- ously. The mean velocity of the Moreton wave, tracked within different sectors of propagation direction, lies in the range of v ~ 900-1100 km/s with two sectors showing wave deceleration. The perturbation profile analysis of the wave indicates amplitude growth followed by amplitude weakening and broadening of the perturbation profile, which is con- sistent with a disturbance first driven and then evolving into a freely propagating wave. The EIT wavefront is found to lie on the same kinematical curve as the Moreton wavefronts indicating that both are different signatures of the same physical process. Bipolar coronal dim- mings are observed on the same opposite East-West edges of the active region as the Moreton wave ignition centers. The radio type II source, which is co-spatially located with the first wave front, indicates that the wave was launched from an extended source region (& 60 Mm). These findings suggest that the Moreton wave is initiated by the CME expanding flanks.

In a case study (June 6-7, 2008) we report on how the internal structure of a coronal mass ejection (CME) at 1 AU can be anticipated from remote observations of white-light images of the heliosphere. Favorable circumstances are the absence of fast equatorial solar wind streams and a low CME velocity which allow us to relate the imaging and in-situ data in a straightforward way. The STEREO-B spacecraft encountered typical signatures of a magnetic flux rope inside an interplanetary CME (ICME) whose axis was inclined at 45 degree to the solar equatorial plane. Various CME direction-finding techniques yield consistent results to within 15 degree. Further, remote images from STEREO-A show that (1) the CME is unambiguously connected to the ICME and can be tracked all the way to 1 AU, (2) the particular arc-like morphology of the CME points to an inclined axis, and (3) the three-part structure of the CME may be plausibly related to the in situ data. This is a first step in predicting both the direction of travel and the internal structure of CMEs from complete remote observations between the Sun and 1 AU, which is one of the main requirements for forecasting the geo-effectiveness of CMEs.

The issue whether Moreton waves are flare-ignited or CME-driven, or a combination of both, is still a matter of debate. We develop an analytical model describing the evolution of a large-amplitude coronal wave emitted by the expansion of a circular source surface in order to mimic the evolution of a Moreton wave. The model results are confronted with observations of a strong Moreton wave observed in association with the X3.8/3B flare/CME event from January 17, 2005. Using different input parameters for the expansion of the source region, either derived from the real CME observations (assuming that the upward moving CME drives the wave), or synthetically generated scenarios (expanding flare region, lateral expansion of the CME flanks), we calculate the kinematics of the associated Moreton wave signature. Those model input parameters are determined which fit the observed Moreton wave kinematics best. Using the measured kinematics of the upward moving CME as the model input, we are not able to reproduce the observed Moreton wave kinematics. The observations of the Moreton wave can be reproduced only by applying a strong and impulsive acceleration for the source region expansion acting in a piston mechanism scenario. Based on these results we propose that the expansion of the flaring region or the lateral expansion of the CME flanks is more likely the driver of the Moreton wave than the upward moving CME front.

We present the first observations of a global coronal wave ("EIT wave") from the two Solar Terrestrial Relations Observatory (STEREO) satellites in quadra- ture. The wave's initiation site was at the disk center in STEREO-B and precisely on the limb in STEREO-A. These unprecedented observations from the STEREO Extreme Ultraviolet Imaging (EUVI) instruments enable us to gain insight into the wave's kinematics, initiation and 3D structure. The wave propagates globally over the whole solar hemisphere visible to STEREO-B with a constant velocity of 263+/-16 km/s. From the two STEREO observations we derive a height of the wave in the range of 80-100 Mm. Comparison of the wave kinematics with the early phase of the erupting CME structure indicates that the wave is initiated by the CME lateral expansion, and then propagates freely with a velocity close to the fast magnetosonic speed in the quiet solar corona.

We report a large-scale coronal wave (so-called "EIT wave") observed with high cadence by EUVI onboard STEREO in association with the GOES B9.5 flare and double CME event on 19 May 2007. The EUVI instruments provide us with the unprecedented opportunity to study the {\it dynamics} of flare/CME associated coronal waves imaged in the extreme ultraviolet. The coronal wave under study reveals deceleration, indicative of a freely propagating MHD wave. Complementary analysis of the associated flare and erupting filament/CME hint at wave initiation by the CME expanding flanks, which drive the wave only over a limited distance. The associated flare is very weak and occurs too late to account for the wave initiation.

It is assumed that HXR sources map to the primary energy release site in flares where particle acceleration occurs. Strong HXR sources are mostly observed at confined regions along the reconnecting magnetic arcade. We make a general approach on how the geometry of the reconnecting current sheet (CS) may influence the strength and localization of observed HXR sources. For this we use results from an analysis on the 3B/X3.8 flare on January 17, 2005 (Temmer et al., 2007), as well as measurements from the associated CME. Due to the close match of the CME acceleration profile and the flare HXR flux, we suppose that the CME might play a certain role in modifying the geometry of the CS ('symmetric' versus 'asymmetric' vertically stretched CS). This could be the driver for 'guiding' the accelerated particles to confined areas along the flaring arcade and might explain the spatially limited occurrence of strong HXR sources in comparison to elongated ribbons as seen in H-alpha and UV.

We report high-cadence H-alpha observations of a distinct Moreton wave observed at Kanzelhoehe Solar Observatory associated with the 3B/X3.8 flare and CME event of 2005 January 17. The Moreton wave can be identified in about 40 H-alpha frames over a period of 7 min. The EIT wave is observed in only one frame but the derived propagation distance is close to that of the simultaneously measured Moreton wave fronts indicating that they are closely associated phenomena. The large angular extent of the Moreton wave allows us to study the wave kinematics in different propagation directions with respect to the location of a polar coronal hole (CH). In particular we find that the wave segment whose propagation direction is perpendicular to the CH boundary (``frontal encounter'') is stopped by the CH which is in accordance with observations reported from EIT waves (Thompson et al. 1998). However, we also find that at a tongue-shaped edge of the coronal hole, where the front orientation is perpendicular to the CH boundary (the wave ``slides along'' the boundary), the wave signatures can be found up to 100 Mm inside the CH. These findings are briefly discussed in the frame of recent modeling results.

Sunspot drawings are provided on a regular basis at the Kanzelhoehe Solar Observatory, Austria, and the derived relative sunspot numbers are reported to the Sunspot Index Data Center in Brussels. From the daily sunspot drawings, we derived the northern, R_n, and southern, R_s, relative sunspot numbers for the time span 1975-2000. In order to accord with the International Sunspot Numbers R_i, the R_n and R_s have been normalized to the R_i, which ensures that the relation R_n + R_s = R_i is fulfilled. For validation, the derived R_n and R_s are compared to the international northern and southern relative sunspot numbers, which are available from 1992. The regression analysis performed for the period 1992-2000 reveals good agreement with the International hemispheric Sunspot Numbers. The monthly mean and the smoothed monthly mean hemispheric Sunspot Numbers are compiled into a catalogue. Based on the derived hemispheric Sunspot Numbers, we study the significance of N-S asymmetries and the rotational behavior separately for both hemispheres. We obtain that about 60% of the monthly N-S asymmetries are significant at a 95% level, whereas the relative contributions of the northern and southern hemisphere are different for different cycles. From the analysis of power spectra and autocorrelation functions, we derive a rigid rotation with about 27 days for the northern hemisphere, which can be followed for up to 15 periods. Contrary to that, the southern hemisphere reveals a dominant period of about 28 days, whereas the autocorrelation is strongly attenuated after 3 periods. These findings suggest that the activity of the northern hemisphere is dominated by an active zone, whereas the southern activity is mainly dominated by individual long-lived sunspot groups.

Based on simultaneous observations of solar flares in hard and soft X-rays we studied several aspects of the Neupert effect. About half of 1114 analyzed events show a timing behavior consistent with the Neupert effect. For these events, a high correlation between the soft X-ray peak flux and the hard X-ray fluence is obtained, being indicative of electron-beam-driven evaporation. However, for about one fourth of the events there is strong evidence for an additional heating agent other than electron beams. We discuss the relevance of these findings with respect to Parker's idea of coronal heating by nanoflares.

The timing of 503 solar flares observed simultaneously in hard X-rays, soft X-rays and H-alpha is analyzed. We investigated the start and the peak time differences in different wavelengths, as well as the differences between the end of the hard X-ray emission and the maximum of the soft X-ray and H-alpha emission. In more than 90% of the analyzed events, a thermal preheating seen in soft X-rays is present prior to the impulsive flare phase. On average, the soft X-ray emission starts 3 min before the hard X-ray and the H-alpha emission. No correlation between the duration of the preheating phase and the importance of the subsequent flare is found. Furthermore, the duration of the preheating phase does not differ for impulsive and gradual flares. For at least half of the events, the end of the nonthermal emission coincides well with the maximum of the thermal emission, consistent with the beam-driven evaporation model. On the other hand, for about 25% of the events there is strong evidence for prolonged evaporation beyond the end of the hard X-rays. For these events, the presence of an additional energy transport mechanism, most probably thermal conduction, seems to play an important role.

A statistical analysis of almost 50000 soft X-ray (SXR) flares observed by GOES during the period 1976-2000 is presented. On the basis of this extensive data set, statistics on temporal properties of soft X-ray flares, such as duration, rise and decay times with regard to the SXR flare classes is presented. Correlations among distinct flare parameters, i.e. SXR peak flux, fluence and characteristic times, and frequency distributions of flare occurrence as function of the peak flux, the fluence and the duration are derived. We discuss the results of the analysis with respect to statistical flare models, the idea of coronal heating by nanoflares, and elaborate on implications of the obtained results on the Neupert effect in solar flares.

A statistical analysis of a large data set of H-alpha flares comprising almost 100000 single events that occurred during the period January 1975 to December 1999 is presented. We analyzed the flares evolution steps, i.e. duration, rise times, decay times and event asymmetries. Moreover, these parameters characterizing the temporal behavior of flares, as well as the spatial distribution on the solar disk, i.e. N-S and E-W asymmetries, are analyzed in terms of their dependency on the solar cycle. The main results are: 1) The duration, rise and decay times increase with increasing importance class. The increase is more pronounced for the decay times than for the rise times. The same relation is valid with regard to the brightness classes but in a weaker manner. 2) The event asymmetry indices, which characterize the proportion of the decay to the rise time of an event, are predominantly positive (90%). For about 50% of the events the decay time is even more than 4 times as long as the rise time. 3) The event asymmetries increase with the importance class. 4) The flare duration and decay times vary in phase with the solar cycle; the rise times do not. 5) The event asymmetries do not reveal a distinct correlation with the solar cycle. However, they drop during times of solar minima, which can be explained by the shorter decay times found during minimum activity. 6) There exists a significant N-S asymmetry over longer periods, and the dominance of one hemisphere over the other can persist for more than one cycle. 7) For certain cycles there may be evidence that the N-S asymmetry evolves with the solar cycle, but in general this is not the case. 8) There exists a slight but significant E-W asymmetry with a prolonged eastern excess.

Based on a sample of 1114 flares observed simultaneously in hard X-rays (HXR) by the BATSE instrument and in soft X-rays (SXR) by GOES, we studied several aspects of the Neupert effect and its interpretation in the frame of the electron-beam-driven evaporation model. In particular, we investigated the time differences ($\Delta t$) between the maximum of the SXR emission and the end of the HXR emission, which are expected to occur at almost the same time. Furthermore, we performed a detailed analysis of the SXR peak flux -- HXR fluence relationship for the complete set of events, as well as separately for subsets of events which are likely compatible/incompatibe with the timing expectations of the Neupert effect. The distribution of the time differences reveals a pronounced peak at $\Delta t = 0$. About half of the events show a timing behavior which can be considered to be consistent with the expectations from the Neupert effect. For these events, a high correlation between the SXR peak flux and the HXR fluence is obtained, indicative of electron-beam-driven evaporation. However, there is also a significant fraction of flares (about one fourth), which show strong deviations from $\Delta t = 0$, with a prolonged increase of the SXR emission distinctly beyond the end of the HXR emission. These results suggest that electron-beam-driven evaporation plays an important role in solar flares. Yet, in a significant fraction of events, there is also clear evidence for the presence of an additional energy transport mechanism other than the nonthermal electron beams, where the relative contribution is found to vary with the flare importance.