sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Tchernyshyov, Kirill

Normalized to: Tchernyshyov, K.

18 article(s) in total. 128 co-authors, from 1 to 6 common article(s). Median position in authors list is 3,5.

[1]  oai:arXiv.org:1911.03406  [pdf] - 2030598
Evidence of dust grain evolution from extinction mapping in the IC 63 photodissociation region
Comments: 28 pages, 20 figures, accepted for publication in The Astrophysical Journal
Submitted: 2019-11-08
Photodissociation regions (PDRs) are parts of the ISM consisting of predominantly neutral gas, located at the interface between H II regions and molecular clouds. The physical conditions within these regions show variations on very short spatial scales, and therefore PDRs constitute ideal laboratories for investigating the properties and evolution of dust grains. We have mapped IC 63 at high resolution from the UV to the NIR (275 nm to 1.6 $\mu$m), using the Hubble Space Telescope WFC3. Using a Bayesian SED fitting tool, we simultaneously derive a set of stellar ($T_\text{eff}$, $\log(g)$, distance) and extinction ($A_V$, $R_V$) parameters for 520 background stars. We present maps of $A_V$ and $R_V$ with a resolution of 25 arcsec based on these results. The extinction properties vary across the PDR, with values for $A_V$ between 0.5 and 1.4 mag, and a decreasing trend in $R_V$, going from 3.7 at the front of the nebula to values as low as 2.5 further in. This provides evidence for evolution of the dust optical properties. We fit two modified blackbodies to the MIR and FIR SED, obtained by combining the $A_V$ map with data from Spitzer and Herschel. We derive effective temperatures (30 K and 227 K) and the ratio of opacities at 160 $\mu$m to V band $\kappa_{160} / \kappa_V$ ($7.0 \times 10^{-4}$ and $2.9 \times 10^{-9}$) for the two dust populations. Similar fits to individual pixels show spatial variations of $\kappa_{160} / \kappa_{V}$. The analysis of our HST data, combined with these Spitzer and Herschel data, provides the first panchromatic view of dust within a PDR.
[2]  oai:arXiv.org:1808.02035  [pdf] - 1970125
Mid-Infrared Spectroscopic Evidence for AGN Heating Warm Molecular Gas
Comments: Published in MNRAS, 20 pages, 16 figures, link to full tables and stacked spectra (http://pages.jh.edu/~elambri1/MIR_AGN_MolecularGas/)
Submitted: 2018-08-06, last modified: 2019-09-27
We analyse 2,015 mid-infrared (MIR) spectra of galaxies observed with Spitzer's Infrared Spectrograph, including objects with growing super-massive black holes and objects where most of the infrared emission originates from newly formed stars. We determine if and how accreting super-massive black holes at the centre of galaxies -- known as active galactic nuclei (AGN) -- heat and ionize their host galaxies' dust and molecular gas. We use four MIR diagnostics to estimate the contribution of the AGN to the total MIR emission. We refer to galaxies whose AGN contribute more than 50 per cent of the total MIR emission as AGN-dominated. We compare the relative strengths of PAH emission features and find that PAH grains in AGN-dominated sources have a wider range of sizes and fractional ionizations than PAH grains in non-AGN dominated sources. We measure rotational transitions of H_2 and estimate H_2 excitation temperatures and masses for individual targets, H_2 excitation temperatures for spectra stacked by their AGN contribution to the MIR, and the H_2 excitation temperature distributions via a hierarchical Bayesian model. We find an average 200 K difference between the excitation temperatures of the H_2 S(5) and H_2 S(7) pure rotational molecular hydrogen transition pair in AGN-dominated versus non-AGN dominated galaxies. Our findings suggest that AGN impact the interstellar medium of their host galaxies.
[3]  oai:arXiv.org:1903.08993  [pdf] - 1853689
Metal Abundances and Depletions in the Neutral Interstellar Medium of Galaxies: the Local Volume as a Laboratory
Comments: 7 pages, 3 figures, ASTRO2020 white paper
Submitted: 2019-03-21
The comparison of chemical abundances in the neutral gas of galaxies to photospheric abundances of old and young stars, ionized gas abundances, and abundances in galactic halos can trace the chemical enrichment of the universe through cosmic times. In particular, our understanding of chemical enrichment through spectroscopic observations of damped Lyman alpha systems (DLAs) relies on corrections for depletion of metals from the gas to the dust phase. These corrections must be determined in the nearby universe, where both gas-phase abundances and photospheric abundances of young stars recently formed out of the interstellar medium can be measured. Multi-object high-resolution (R>50,000) ultraviolet (970-2400 A) and optical (300-600 nm) spectroscopy toward massive stars in local volume galaxies (D < 15 Mpc) covering a wide range of metallicities (a few % solar to solar) and morphological types will provide the abundance and depletion measurements needed to obtain a detailed and comprehensive characterization of the lifecycle of metals in neutral gas and dust in galaxies, thereby observationally addressing important questions about chemical enrichment and galaxy evolution.
[4]  oai:arXiv.org:1903.05150  [pdf] - 1848636
High-Dimensional Dust Mapping
Comments: Submitted to the Astro2020 call for science white papers. 5 pages plus references, 1 figure
Submitted: 2019-03-12
Galactic interstellar dust has a profound impact not only on our observations of objects throughout the Universe, but also on the morphology, star formation, and chemical evolution of the Galaxy. The advent of massive imaging and spectroscopic surveys (particularly in the infrared) places us on the threshold of being able to map the properties and dynamics of dust and the interstellar medium (ISM) in three dimensions throughout the Milky Way disk and bulge. These developments will enable a fundamentally new understanding of dust properties, including how grains respond to their local environment and how those environments affect dust attenuation of background objects of interest. Distance-resolved maps of dust motion also hold great promise for tracing the flow of interstellar material throughout the Galaxy on a variety of scales, from bar-streaming motions to the collapse and dissolution of individual molecular clouds. These advances require optical and infrared imaging of stars throughout the Galactic midplane, stretching many kiloparsecs from the Sun, matched with very dense spectroscopic coverage to probe the ISM's fine-grained structure.
[5]  oai:arXiv.org:1812.08982  [pdf] - 1845846
The properties of broad absorption line outflows based on a large sample of quasars
Comments: Accepted by Nature Astronomy, 8 pages and 2 figures(main text), 8 supplementary figures
Submitted: 2018-12-21, last modified: 2019-01-28
Quasar outflows carry mass, momentum and energy into the surrounding environment, and have long been considered a potential key factor in regulating the growth of supermassive black holes and the evolution of their host galaxies. A crucial parameter for understanding the origin of these outflows and measuring their influence on their host galaxies is the distance (R) between the outflow gas and the galaxy center. While R has been measured in a number of individual galaxies, its distribution remains unknown. Here we report the distributions of R and the kinetic luminosities of quasars outflows, using the statistical properties of broad absorption line variability in a sample of 915 quasars from the Sloan Digital Sky Surveys. The mean and standard deviation of the distribution of R are 10^{1.4+/-0.5} parsecs. The typical outflow distance in this sample is tens of parsec, which is beyond the theoretically predicted location (0.01 ~ 0.1 parsecs) where the accretion disc line-driven wind is launched, but is smaller than the scales of most outflows that are derived using the excited state absorption lines. The typical value of the mass-flow rate is of tens to a hundred solar masses per year, or several times the accretion rate. The typical kinetic-to-bolometric luminosity ratio is a few per cent, indicating that outflows are energetic enough to influence the evolution of their host galaxies.
[6]  oai:arXiv.org:1901.06416  [pdf] - 2038198
Analytic marginalization of absorption line continua
Comments: Submitted to AAS journals
Submitted: 2019-01-18
Absorption line spectroscopy is a powerful way of measuring properties of stars and the interstellar medium. Absorption spectra are often analyzed manually, an approach that limits reproducibility and which cannot practically be applied to modern datasets consisting of thousands or even millions of spectra. Simultaneous probabilistic modeling of absorption features and continuum shape is a promising approach for automating this analysis. Existing implementations of this approach use numerical methods such as Markov chain Monte Carlo (MCMC) to marginalize over the continuum parameters. Numerical marginalization over large numbers of continuum parameters is too slow to be convenient for exploratory analysis, can increase the dimensionality of an inference problem beyond the capacity of simple MCMC samplers, and is in general impractical for the analysis of large datasets. When continua are parameterized as linear functions such as polynomials or splines, it is possible to reduce continuum parameter marginalization to an integral over a multivariate normal distribution, which has a known closed form. In addition to speeding up probabilistic modeling, analytic marginalization makes it trivial to marginalize over continuum parameterizations and to combine continuum description marginalization with optimization for absorption line parameters. These new possibilities allow automatic, probabilistically justified continuum placement in analyses of large spectroscopic datasets. We compare the accuracy to within which absorption line parameters can be recovered using different continuum placement methods and find that marginalization is in many cases an improvement over other methods. We implement analytic marginalization over linear continuum parameters in the open-source package amlc.
[7]  oai:arXiv.org:1901.06027  [pdf] - 1838354
METAL: The Metal Evolution, Transport, and Abundance in the Large Magellanic Cloud Hubble program. I. Overview and Initial Results
Comments: 28 pages, 15 figures
Submitted: 2019-01-17
Metal Evolution, Transport, and Abundance in the LMC (METAL) is a large Cycle 24 program on the Hubble Space Telescope aimed at measuring dust extinction properties and interstellar depletions in the Large Magellanic Cloud (LMC) at half-solar metallicity. The 101-orbit program is comprised of COS and STIS spectroscopy toward 33 LMC massive stars between 1150 A and 3180 A, and parallel WFC3 imaging in 7 NUV-NIR filters. The fraction of silicon in the gas-phase (depletion) obtained from the spectroscopy decreases with increasing hydrogen column density. Depletion patterns for silicon differ between the Milky Way, LMC, and SMC, with the silicon depletion level offsetting almost exactly the metallicity differences, leading to constant gas-phase abundances in those galaxies for a given hydrogen column density. The silicon depletion correlates linearly with the absolute-to-selective extinction, R$_V$, indicating a link between gas depletion and dust grain size. Extinction maps are derived from the resolved stellar photometry in the parallel imaging, which can be compared to FIR images from Herschel and Spitzer to estimate the emissivity of dust at LMC metallicity. The full METAL sample of depletions, UV extinction curves, and extinction maps will inform the abundance, size, composition, and optical properties of dust grains in the LMC, comprehensively improve our understanding of dust properties, and the accuracy with which dust-based gas masses, star formation rates and histories in nearby and high-redshift galaxies are estimated. This overview paper describes the goals, design, data reduction, and initial results of the METAL survey.
[8]  oai:arXiv.org:1808.01286  [pdf] - 1783849
Kinetic Tomography. II. A second method for mapping the velocity field of the Milky Way Interstellar Medium and a comparison with spiral structure models
Comments: Submitted to AAS journals
Submitted: 2018-08-03
In this work, we derive a spatially resolved map of the line-of-sight velocity of the interstellar medium and use it, along with a second map of line-of-sight velocity from Paper I of this series, to determine the nature of gaseous spiral structure in the Milky Way. This map is derived from measurements of the 1.527 $\mu$m diffuse interstellar band (DIB) in stellar spectra from the APOGEE survey and covers the nearest 4-5 kpc of the Northern Galactic plane. We cross-check this new DIB-based line-of-sight velocity map with the map derived in Paper I and find that they agree. We then compare these maps with line-of-sight velocity maps derived from simulations of quasi-stationary density wave spiral structure and dynamic, or material, spiral structure in a Milky Way-like galaxy. While none of the maps derived from these simulations is an exact match to the measured velocity field of the Milky Way, the measurements are more consistent with simulations of dynamic spiral structure. In the dynamic spiral structure simulation that best matches the measurements, the Perseus spiral arm is being disrupted.
[9]  oai:arXiv.org:1806.08380  [pdf] - 1732743
The initial mass function in the Coma Berenices dwarf galaxy from deep near-infrared HST observations
Comments: ApJ accepted
Submitted: 2018-06-21
We use deep $HST$ WFC3/IR imaging to study the Initial Mass Function (IMF) of the ultra faint dwarf galaxy Coma Berenices (Com Ber). Our observations reach the lowest stellar mass ever probed in a resolved galaxy, with 50\% completeness at $\sim 0.17$ M$_{\odot}$. Unresolved background galaxies however limit our purity below $\sim 0.23$ M$_{\odot}$. If modeled with a single power law, we find that the IMF slope is $-1.45^{+0.29}_{-0.3}$ (68\% credible intervals), compared to a Milky Way value of $-2.3$. For a broken power law, we obtain a low-mass slope of $-1.18_{-0.33}^{+0.49}$, a high-mass slope of $-1.88_{-0.49}^{+0.43}$ and a break mass of $0.57_{-0.08}^{+0.12}$ M$_{\odot}$, compared to $-1.3$, $-2.3$ and 0.5 M$_{\odot}$ for a Kroupa IMF. For a log-normal IMF model we obtain values of $0.33_{-0.16}^{+0.15}$ M$_{\odot}$ for the location parameter and of $0.68_{-0.12}^{+0.17}$ for $\sigma$ (0.22 M$_{\odot}$ and 0.57 for the Chabrier system IMF). All three parametrizations produce similar agreement with the data. Our results agree with previous analysis of shallower optical HST data. However analysis of similar optical data of other dwarfs finds IMFs significantly more bottom-light than in the Milky Way. These results suggest two, non mutually exclusive, possibilities: that the discrepancy of the dwarf galaxies IMF with respect to the Milky Way is, at least partly, an artifact of using a single power law model, and that there is real variance in the IMF at low masses between the currently studied nearby dwarfs, with Com Ber being similar to the Milky Way, but other dwarfs differing significantly.
[10]  oai:arXiv.org:1801.06195  [pdf] - 1648821
Evidence of a non universal stellar Initial Mass Function. Insights from HST optical imaging of 6 Ultra Faint Dwarf Milky Way Satellites
Comments: Accepted for publication in ApJ on 18 Jan 2018
Submitted: 2018-01-18
Using deep HST/ACS observations, we demonstrate that the sub-solar stellar initial mass function (IMF) of 6 ultra-faint dwarf Milky Way Satellites (UFDs) is more bottom light than the IMF of the Milky Way disk. Our data have a lower mass limit of about 0.45 M$_{\odot}$, while the upper limit is $\sim 0.8$ M$_\odot$, set by the turn-off mass of these old, metal poor systems. If formulated as a single power law, we obtain a shallower IMF slope than the "Salpeter" value of $-2.3$, ranging from $-1.01$ for Leo IV, to $-1.87$ for Bo\"otes I. The significance of such deviations depends on the galaxy and is typically 95\% or more. When modeled as a log-normal, the IMF fit results in a larger peak mass than in the Milky Way disk, however a Milky Way disk value for the characteristic system mass ($\sim0.22$ M$_{\odot}$) is excluded only at 68\% significance, and only for some UFDs in the sample. We find that the IMF slope correlates well with the galaxy mean metallicity and, to a lesser degree, with the velocity dispersion and the total mass. The strength of the observed correlations is limited by shot noise in the number of observed stars, but future space-based missions like JWST and WFIRST will both enhance the number of dwarf Milky Way Satellites that can be studied in such detail, and the observation depth for individual galaxies.
[11]  oai:arXiv.org:1611.03867  [pdf] - 1532578
Kinetic Tomography I: A Method for Mapping the Milky Way's Interstellar Medium in Four Dimensions
Comments: 11 pages, 5 figures, accepted for publication in The Astronomical Journal
Submitted: 2016-11-11
We have developed a method for deriving the distribution of the Milky Way's interstellar medium as a function of longitude, latitude, distance and line-of-sight velocity. This method takes as input maps of reddening as a function of longitude, latitude, and distance and maps of line emission as a function of longitude, latitude, and line-of-sight velocity. We have applied this method to datasets covering much of the Galactic plane. The output of this method correctly reproduces the line-of-sight velocities of high-mass star forming regions with known distances from Reid et al. (2014) and qualitatively agrees with results from the Milky Way kinematics literature. These maps will be useful for measuring flows of gas around the Milky Way's spiral arms and into and out of giant molecular clouds.
[12]  oai:arXiv.org:1606.06182  [pdf] - 1447813
The Panchromatic Hubble Andromeda Treasury XV. The BEAST: Bayesian Extinction and Stellar Tool
Comments: 20 pages, 19 figures, ApJ, in press
Submitted: 2016-06-20
We present the Bayesian Extinction And Stellar Tool (BEAST), a probabilistic approach to modeling the dust extinguished photometric spectral energy distribution of an individual star while accounting for observational uncertainties common to large resolved star surveys. Given a set of photometric measurements and an observational uncertainty model, the BEAST infers the physical properties of the stellar source using stellar evolution and atmosphere models and constrains the line of sight extinction using a newly developed mixture model that encompasses the full range of dust extinction curves seen in the Local Group. The BEAST is specifically formulated for use with large multi-band surveys of resolved stellar populations. Our approach accounts for measurement uncertainties and any covariance between them due to stellar crowding (both systematic biases and uncertainties in the bias) and absolute flux calibration, thereby incorporating the full information content of the measurement. We illustrate the accuracy and precision possible with the BEAST using data from the Panchromatic Hubble Andromeda Treasury. While the BEAST has been developed for this survey, it can be easily applied to similar existing and planned resolved star surveys.
[13]  oai:arXiv.org:1602.03928  [pdf] - 1396863
The Optical-Infrared Extinction Curve and its Variation in the Milky Way
Comments: 26 pages, 20 figures, comments welcome
Submitted: 2016-02-11
The dust extinction curve is a critical component of many observational programs and an important diagnostic of the physics of the interstellar medium. Here we present new measurements of the dust extinction curve and its variation towards tens of thousands of stars, a hundred-fold larger sample than in existing detailed studies. We use data from the APOGEE spectroscopic survey in combination with ten-band photometry from Pan-STARRS1, 2MASS, and WISE. We find that the extinction curve in the optical through infrared is well characterized by a one-parameter family of curves described by R(V). The extinction curve is more uniform than suggested in past works, with sigma(R(V)) = 0.18, and with less than one percent of sight lines having R(V) > 4. Our data and analysis have revealed two new aspects of Galactic extinction: first, we find significant, wide-area variations in R(V) throughout the Galactic plane. These variations are on scales much larger than individual molecular clouds, indicating that R(V) variations must trace much more than just grain growth in dense molecular environments. Indeed, we find no correlation between R(V) and dust column density up to E(B-V) ~ 2. Second, we discover a strong relationship between R(V) and the far-infrared dust emissivity.
[14]  oai:arXiv.org:1506.04144  [pdf] - 1259009
A Transition Mass in the Local Tully-Fisher Relation
Comments: Accepted to MNRAS. 14 pages, 7 figures
Submitted: 2015-06-12
We study the stellar mass Tully-Fisher relation (TFR, stellar mass versus rotation velocity) for a morphologically blind selection of emission line galaxies in the field at redshifts 0.1 $<$ z $<$ 0.375. Kinematics ($\sigma_g$, V$_{rot}$) are measured from emission lines in Keck/DEIMOS spectra and quantitative morphology is measured from V- and I-band Hubble images. We find a transition stellar mass in the TFR, $\log$ M$_*$ = 9.5 M$_{\odot}$. Above this mass, nearly all galaxies are rotation-dominated, on average more morphologically disk-like according to quantitative morphology, and lie on a relatively tight TFR. Below this mass, the TFR has significant scatter to low rotation velocity and galaxies can either be rotation-dominated disks on the TFR or asymmetric or compact galaxies which scatter off. We refer to this transition mass as the "mass of disk formation", M$_{\mathrm{df}}$ because above it all star-forming galaxies form disks (except for a small number of major mergers and highly star-forming systems), whereas below it a galaxy may or may not form a disk.
[15]  oai:arXiv.org:1504.04865  [pdf] - 1258825
A new method for deriving the stellar birth function of resolved stellar populations
Comments: Accepted for publication in ApJ
Submitted: 2015-04-19
We present a new method for deriving the stellar birth function (SBF) of resolved stellar populations. The SBF (stars born per unit mass, time, and metallicity) is the combination of the initial mass function (IMF), the star-formation history (SFH), and the metallicity distribution function (MDF). The framework of our analysis is that of Poisson Point Processes (PPPs), a class of statistical models suitable when dealing with points (stars) in a multidimensional space (the measurement space of multiple photometric bands). The theory of PPPs easily accommodates the modeling of measurement errors as well as that of incompleteness. Compared to most of the tools used to study resolved stellar populations, our method avoids binning stars in the color-magnitude diagram and uses the entirety of the information (i.e., the whole likelihood function) for each data point; the proper combination of the individual likelihoods allows the computation of the posterior probability for the global population parameters. This includes unknowns such as the IMF slope and combination of SFH and MDF, which are rarely solved for simultaneously in the literature, however entangled and correlated they might be. Our method also allows proper inclusion of nuisance parameters, such as distance and extinction distributions. The aim of this paper, is to assess the validity of this new approach under a range of assumptions, using only simulated data. Forthcoming work will show applications to real data. Although it has a broad scope of possible applications, we have developed this method to study multi-band HST observations of the Milky Way Bulge. Therefore we will focus on simulations with characteristics similar to those of the Galactic Bulge.
[16]  oai:arXiv.org:1503.08852  [pdf] - 1284779
Elemental depletions in the Magellanic Clouds and the evolution of depletions with metallicity
Comments: Submitted to ApJ
Submitted: 2015-03-30
We present a study of the composition of gas and dust in the Large and Small Magellanic Clouds (LMC and SMC, together -- the MCs) as measured by UV absorption spectroscopy. We have measured P II and Fe II along 85 sightlines toward the MCs using archival FUSE observations. For 16 of those sightlines, we have measured Si II, Cr II, and Zn II from new HST COS observations. We have combined these measurements with H I and H$_2$ column densities and reference stellar abundances from the literature to derive gas-phase abundances, depletions, and gas-to-dust ratios (GDRs). 80 of our 84 P measurements and 13 of our 16 Zn measurements are depleted by more than 0.1 decades, suggesting that P and Zn abundances are not accurate metallicity indicators at and above the metallicity of the SMC. The maximum P and Zn depletions are the same in the MW, LMC, and SMC. Si, Cr, and Fe are systematically less depleted in the SMC than in the MW or LMC. The minimum Si depletion in the SMC is consistent with zero. Our depletion-derived GDRs broadly agree with GDRs from the literature. The GDR varies from location to location within a galaxy by a factor of up to 2 in the LMC and up to 5 in the SMC. This variation is evidence of dust destruction and/or growth in the diffuse neutral phase of the interstellar medium.
[17]  oai:arXiv.org:1411.4574  [pdf] - 1223215
Dust Destruction Rates and Lifetimes in the Magellanic Clouds
Comments: 15 pages, 8 figures, 5 tables, accepted to ApJ
Submitted: 2014-11-17
The nature, composition, abundance, and size distribution of dust in galaxies is determined by the rate at which it is created in the different stellar sources and destroyed by interstellar shocks. Because of their extensive wavelength coverage, proximity, and nearly face-on geometry, the Magellanic Clouds (MCs) provide a unique opportunity to study these processes in great detail. In this paper we use the complete sample of supernova remnants (SNRs) in the MCs to calculate the lifetime and destruction efficiencies of silicate and carbon dust in these galaxies. We find dust lifetimes of 22 +- 13 Myr (30 +- 17 Myr) for silicate (carbon) grains in the LMC, and 54 +- 32 Myr (72 +- 43 Myr) for silicate (carbon) grains in the SMC. The significantly shorter lifetimes in the MCs, as compared to the Milky Way, are explained as the combined effect of their lower total dust mass, and the fact that the dust-destroying isolated SNe in the MCs seem to be preferentially occurring in regions with higher than average dust-to-gas (D2G) mass ratios. We also calculate the supernova rate and the current star formation rate in the MCs, and use them to derive maximum dust injection rates by asymptotic giant branch stars and core collapse supernovae. We find that the injection rates are an order of magnitude lower than the dust destruction rates by the SNRs. This supports the conclusion that, unless the dust destruction rates have been considerably overestimated, most of the dust must be reconstituted from surviving grains in dense molecular clouds. More generally, we also discuss the dependence of the dust destruction rate on the local D2G mass ratio, the ambient gas density and metallicity, as well as the application of our results to other galaxies and dust evolution models.
[18]  oai:arXiv.org:1406.6066  [pdf] - 1215169
Dust and Gas in the Magellanic Clouds from the HERITAGE Herschel Key Project. I. Dust Properties and Insights into the Origin of the Submm Excess Emission
Comments: 20 pages, 9 figures, accepted for publication in the ApJ
Submitted: 2014-06-23
The dust properties in the Large and Small Magellanic Clouds are studied using the HERITAGE Herschel Key Project photometric data in five bands from 100 to 500 micron. Three simple models of dust emission were fit to the observations: a single temperature blackbody modified by a power- law emissivity (SMBB), a single temperature blackbody modified by a broken power-law emissivity (BEMBB), and two blackbodies with different temperatures, both modified by the same power-law emissivity (TTMBB). Using these models we investigate the origin of the submm excess; defined as the submillimeter (submm) emission above that expected from SMBB models fit to observations < 200 micron. We find that the BEMBB model produces the lowest fit residuals with pixel-averaged 500 micron submm excesses of 27% and 43% for the LMC and SMC, respectively. Adopting gas masses from previous works, the gas-to-dust ratios calculated from our the fitting results shows that the TTMBB fits require significantly more dust than are available even if all the metals present in the interstellar medium (ISM) were condensed into dust. This indicates that the submm excess is more likely to be due to emissivity variations than a second population of colder dust. We derive integrated dust masses of (7.3 +/- 1.7) x 10^5 and (8.3 +/- 2.1) times 10^4 M(sun) for the LMC and SMC, respectively. We find significant correlations between the submm excess and other dust properties; further work is needed to determine the relative contributions of fitting noise and ISM physics to the correlations.