We present a study of the wind launching region of the Herbig Be star HD 58647 using high angular (lambda/2B=0.003") and high spectral (R=12000) resolution interferometric VLTI-AMBER observations of the near-infrared hydrogen emission line, Br-gamma. The star displays double peaks in both Br-gamma line profile and wavelength-dependent visibilities. The wavelength-dependent differential phases show S-shaped variations around the line centre. The visibility level increases in the line (by ~0.1) at the longest projected baseline (88 m), indicating that the size of the line emission region is smaller than the size of the K-band continuum-emitting region, which is expected to arise near the dust sublimation radius of the accretion disc. The data have been analysed using radiative transfer models to probe the geometry, size and physical properties of the wind that is emitting Br-gamma. We find that a model with a small magnetosphere and a disc wind with its inner radius located just outside of the magnetosphere can well reproduce the observed Br-gamma profile, wavelength-dependent visibilities, differential and closure phases, simultaneously. The mass-accretion and mass-loss rates adopted for the model are Mdot_a = 3.5 x 10^{-7} Msun/yr and Mdot_dw = 4.5 x 10^{-8} Msun/yr, respectively (Mdot_dw/Mdot_a =0.13). Consequently, about 60 per cent of the angular momentum loss rate required for a steady accretion with the measured accretion rate is provide by the disc wind. The small magnetosphere in HD 58647 does not contribute to the Br-gamma line emission significantly.

We present an analytical derivation of the on-axis performance of Adaptive Optics systems using a given number of guide stars of arbitrary altitude, distributed at arbitrary angular positions in the sky. The expressions of the residual error are given for cases of both continuous and discrete turbulent atmospheric profiles. Assuming Shack-Hartmann wavefront sensing with circular apertures, we demonstrate that the error is formally described by integrals of products of three Bessel functions. We compare the performance of Adaptive Optics correction when using natural, Sodium or Rayleigh laser guide stars. For small diameter class telescopes (~5m), we show that a few number of Rayleigh beacons can provide similar performance to that of a single Sodium laser, for a lower overall cost of the instrument. For bigger apertures, using Rayleigh stars may not be such a suitable alternative because of the too severe cone effect that drastically degrades the quality of the correction.

This paper studies the effects on Zernike coefficients of aperture scaling, translation and rotation, when a given aberrated wavefront is described on the Zernike polynomial basis. It proposes a new analytical method for computing the matrix that enables the building of the transformed Zernike coefficients from the original ones. The technique is based on the properties of Zernike polynomials Fourier Transform and, in the case of a full aperture without central obstruction, the coefficients of the matrix are given in terms of integrals of Bessel functions. The integral formulas are exact and do not depend on any specific ordering of the polynomials.

The visitor instrument PIONIER provides VLTI with improved imaging capabilities and sensitivity. The instrument started routinely delivering scientific data in November 2010, that is less than 12 months after being approved by the ESO Science and Technical Committee. We recall the challenges that had to be tackled to design, built and commission PIONIER. We summarize the typical performances and some astrophysical results obtained so far. We conclude this paper by summarizing lessons learned.

We present a review of the interplay between the evolution of circumstellar disks and the formation of planets, both from the perspective of theoretical models and dedicated observations. Based on this, we identify and discuss fundamental questions concerning the formation and evolution of circumstellar disks and planets which can be addressed in the near future with optical and infrared long-baseline interferometers. Furthermore, the importance of complementary observations with long-baseline (sub)millimeter interferometers and high-sensitivity infrared observatories is outlined.

We study the sub-AU-scale circumstellar environment of the Herbig Ae star HD144432 with near-infrared (NIR) VLTI/AMBER observations to investigate the structure of its inner dust disk. The interferometric observations were carried out with the AMBER instrument in the H and K band. We interpret the measured H- and K-band visibilities, the near- and mid-infrared visibilities from the literature, and the SED of HD144432 by using geometric ring models and ring-shaped temperature-gradient disk models with power-law temperature distributions. We derived a K-band ring-fit radius of 0.17 \pm 0.01 AU and an H-band radius of 0.18 \pm 0.01 AU (for a distance of 145 pc). This measured K-band radius of \sim0.17 AU lies in the range between the dust sublimation radius of \sim0.13 AU (predicted for a dust sublimation temperature of 1500 K and gray dust) and the prediction of models including backwarming (\sim0.27 AU). We found that an additional extended halo component is required in both the geometric and temperature-gradient modeling. In the best temperature- gradient model, the disk consists of two components. The inner part of the disk is a thin ring with an inner radius of \sim0.21 AU, a temperature of \sim1600 K, and a ring thickness \sim0.02 AU. The outer part extends from \sim1 AU to \sim10 AU with an inner temperature of \sim400 K. We find that the disk is nearly face-on with an inclination angle of < 28 degree. Our temperature-gradient modeling suggests that the NIR excess is dominated by emission from a narrow, bright rim located at the dust sublimation radius, while an extended halo component contributes \sim6% to the total flux at 2 {\mu}m. The MIR model emission has a two-component structure with \sim20% flux from the inner ring and the rest from the outer part. This two-component structure suggests a disk gap, which is possibly caused by the shadow of a puffed-up inner rim.

PIONIER stands for Precision Integrated-Optics Near-infrared Imaging ExpeRiment. It combines four 1.8m Auxilliary Telescopes or four 8m Unit Telescopes of the Very Large Telescope Interferometer (ESO, Chile) using an integrated optics combiner. The instrument has been integrated at IPAG starting in December 2009 and commissioned at the Paranal Observatory in October 2010. It provides scientific observations since November 2010. In this paper, we detail the instrumental concept, we describe the standard operational modes and the data reduction strategy. We present the typical performance and discuss how to improve them. This paper is based on laboratory data obtained during the integrations at IPAG, as well as on-sky data gathered during the commissioning at VLTI. We illustrate the imaging capability of PIONIER on the binaries deltaSco and HIP11231. PIONIER provides 6 visibilities and 3 independent closure phases in the H band, either in a broadband mode or with a low spectral dispersion (R=40), using natural light (i.e. unpolarized). The limiting magnitude is Hmag=7 in dispersed mode under median atmospheric conditions (seeing<1", tau0>3ms) with the 1.8m Auxiliary Telescopes. We demonstrate a precision of 0.5deg on the closure phases. The precision on the calibrated visibilities ranges from 3 to 15% depending on the atmospheric conditions. PIONIER has been installed and successfully tested as a visitor instrument for the VLTI. It permits high angular resolution imaging studies at an unprecedented level of sensitivity. The successful combination of the four 8m Unit Telescopes in March 2011 demonstrates that VLTI is ready for 4-telescope operation.

Despite its importance in the thermal-balance of the gas and in the determination of primeval planetary atmospheres, the chemistry in protoplanetary discs remains poorly constrained with only a handful of detected species. We observed the emission from disc around the Herbig Be star HD 100546 with the PACS instrument in the spectroscopic mode on board the Herschel Space Telescope as part of the Gas in Protoplanetary Systems (GASPS) programme and used archival data from the DIGIT programme to search for the rotational emission of CH+. We detected in both datasets an emission line centred at 72.16 micron that most likely corresponds to the J=5-4 rotational emission of CH+. The J=3-2 and 6-5 transitions are also detected albeit with lower confidence. Other CH+ rotational lines in the PACS observations are blended with water lines. A rotational diagram analysis shows that the CH+ gas is warm at 323 (+2320/-151) K with a mass of 3e-14-5e-12 M_Sun. We modelled the CH+ chemistry with the chemo-physical code ProDiMo using a disc density structure and grain parameters that match continuum observations and near- and mid-infrared interferometric data. The model suggests that CH+ is most abundant at the location of the disc rim at 10-13 AU from the star where the gas is warm, consistent with previous observations of hot CO gas emission.

Studying the physical conditions in circumstellar disks is a crucial step toward understanding planet formation. Of particular interest is the case of HD 100546, a Herbig Be star that presents a gap within the first 13 AU of its protoplanetary disk, that may originate in the dynamical interactions of a forming planet. We gathered a large amount of new interferometric data using the AMBER/VLTI instrument in the H- and K-bands to spatially resolve the warm inner disk and constrain its structure. Then, combining these measurements with photometric observations, we analyze the circumstellar environment of HD 100546 in the light of a passive disk model based on 3D Monte-Carlo radiative transfer. Finally, we use hydrodynamical simulations of gap formation by planets to predict the radial surface density profile of the disk and test the hypothesis of ongoing planet formation. The SED and the NIR interferometric data are adequately reproduced by our model. We show that the H- and K-band emissions are coming mostly from the inner edge of the internal dust disk, located near 0.24 AU from the star, i.e., at the dust sublimation radius in our model. We directly measure an inclination of $33^{\circ} \pm 11^{\circ}$ and a position angle of $140^{\circ} \pm 16^{\circ}$ for the inner disk. This is similar to the values found for the outer disk ($i \simeq 42^{\circ}$, $PA \simeq 145^{\circ}$), suggesting that both disks may be coplanar. We finally show that 1 to 8 Jupiter mass planets located at $\sim 8$ AU from the star would have enough time to create the gap and the required surface density jump of three orders of magnitude between the inner and outer disk. However, no information on the amount of matter left in the gap is available, which precludes us from setting precise limits on the planet mass, for now.

The transition between massive Class II circumstellar disks and Class III debris disks, with dust residuals, has not yet been clearly understood. Disks are expected to dissipate with time, and dust clearing in the inner regions can be the consequence of several mechanisms. Planetary formation is one of them that will possibly open a gap inside the disk. According to recent models based on photometric observations, T Cha is expected to present a large gap within its disk, meaning that an inner dusty disk is supposed to have survived close to the star. We investigate this scenario with new near-infrared interferometric observations. We observed T Cha in the H and K bands using the AMBER instrument at VLTI and used the MCFOST radiative transfer code to model the SED of T Cha and the interferometric observations simultaneously and to test the scenario of an inner dusty structure. We also used a toy model of a binary to check that a companion close to the star can reproduce our observations. The scenario of a close (few mas) companion cannot satisfactorily reproduce the visibilities and SED, while a disk model with a large gap and an inner ring producing the bulk of the emission (in H and K-bands) close to 0.1 AU is able to account for all the observations. With this study, the presence of an optically thick inner dusty disk close to the star and dominating the H and K- bands emission is confirmed. According to our model, the large gap extends up to ~ 7.5 AU. This points toward a companion (located at several AU) gap-opening scenario to explain the morphology of T Cha.

Circumstellar disks and outflows play a fundamental role in star formation. Infrared spectro-interferometry allows the inner accretion-ejection region to be resolved. We measured interferometric visibilities, wavelength-differential phases, and closure phases of MWC 297 with a spectral resolution of 12000. To interpret our MWC 297 observations, we employed disk-wind models. The measured continuum visibilities confirm previous results that the continuum-emitting region of MWC 297 is remarkably compact. We derive a continuum ring-fit radius of ~2.2 mas (~0.56 AU at a distance of 250 pc), which is ~5.4 times smaller than the 3 AU dust sublimation radius expected for silicate grains (in the absence of radiation-shielding material). The strongly wavelength-dependent and asymmetric Br gamma-emitting region is more extended (~2.7 times) than the continuum-emitting region. At the center of the Br gamma line, we derive a Gaussian fit radius of ~6.3 mas HWHM (~1.6 AU). To interpret the observations, we employ a magneto-centrifugally driven disk-wind model consisting of an accretion disk, which emits the observed continuum radiation, and a disk wind, which emits the Br gamma line. The calculated wavelength-dependent model intensity distributions and Br gamma line profiles are compared with the observations (i.e., K-band spectrum, visibilities, differential phases, and closure phases). The closest fitting model predicts a continuum-emitting disk with an inner radius of ~0.3 AU and a disk wind ejection region with an inner radius of ~0.5 AU (~17.5 stellar radii). We obtain a disk-wind half-opening angle (the angle between the rotation axis and the innermost streamline of the disk wind) of ~80 degrees, which is larger than in T Tau models, and a disk inclination angle of ~20 degrees (i.e., almost pole-on).

In this paper we compare the performance of multi and single-mode interferometry for the estimation of the phase of the complex visibility. We provide a theoretical description of the interferometric signal which enables to derive the phase error in presence of detector, photon and atmospheric noises, for both multi and single-mode cases. We show that, despite the loss of flux occurring when injecting the light in the single-mode component (i.e. single-mode fibers, integrated optics), the spatial filtering properties of such single-mode devices often enable higher performance than multimode concepts. In the high flux regime speckle noise dominated, single-mode interferometry is always more efficient, and its performance is significantly better when the correction provided by adaptive optics becomes poor, by a factor of 2 and more when the Strehl ratio is lower than 10%. In low light level cases (detector noise regime), multimode interferometry reaches better performance, yet the gain never exceeds 20%, which corresponds to the percentage of photon loss due to the injection in the guides. Besides, we demonstrate that single-mode interferometry is also more robust to the turbulence in both cases of fringe tracking and phase referencing, at the exception of narrow field of views (<1 arcsec).

PIONIER is a 4-telescope visitor instrument for the VLTI, planned to see its first fringes in 2010. It combines four ATs or four UTs using a pairwise ABCD integrated optics combiner that can also be used in scanning mode. It provides low spectral resolution in H and K band. PIONIER is designed for imaging with a specific emphasis on fast fringe recording to allow closure-phases and visibilities to be precisely measured. In this work we provide the detailed description of the instrument and present its updated status.

In a few years, the second generation instruments of the Very Large Telescope Interferometer (VLTI) will routinely provide observations with 4 to 6 telescopes simultaneously. To reach their ultimate performance, they will need a fringe sensor capable to measure in real time the randomly varying optical paths differences. A collaboration between LAOG (PI institute), IAGL, OCA and GIPSA-Lab has proposed the Planar Optics Phase Sensor concept to ESO for the 2nd Generation Fringe Tracker. This concept is based on the integrated optics technologies, enabling the conception of extremely compact interferometric instruments naturally providing single-mode spatial filtering. It allows operations with 4 and 6 telescopes by measuring the fringes position thanks to a spectrally dispersed ABCD method. We present here the main analysis which led to the current concept as well as the expected on-sky performance and the proposed design.

Accretion is a fundamental process in star formation. Although the time evolution of accretion remains a matter of debate, observations and modelling studies suggest that episodic outbursts of strong accretion may dominate the formation of the protostar. Observing young stellar objects during these elevated accretion states is crucial to understanding the origin of unsteady accretion. ZCMa is a pre-main-sequence binary system composed of an embedded Herbig Be star, undergoing photometric outbursts, and a FU Orionis star. The Herbig Be component recently underwent its largest optical photometric outburst detected so far. We aim to constrain the origin of this outburst by studying the emission region of the HI Brackett gamma line, a powerful tracer of accretion/ejection processes on the AU-scale in young stars. Using the AMBER/VLTI instrument at spectral resolutions of 1500 and 12 000, we performed spatially and spectrally resolved interferometric observations of the hot gas emitting across the Brackett gamma emission line, during and after the outburst. From the visibilities and differential phases, we derive characteristic sizes for the Brackett gamma emission and spectro-astrometric measurements across the line, with respect to the continuum. We find that the line profile, the astrometric signal, and the visibilities are inconsistent with the signature of either a Keplerian disk or infall of matter. They are, instead, evidence of a bipolar wind, maybe partly seen through a disk hole inside the dust sublimation radius. The disappearance of the Brackett gamma emission line after the outburst suggests that the outburst is related to a period of strong mass loss rather than a change of the extinction along the line of sight. Based on these conclusions, we speculate that the origin of the outburst is an event of enhanced mass accretion, similar to those occuring in EX Ors and FU Ors.

Disclosing the structure of disks surrounding Herbig AeBe stars is important to expand our understanding of the formation and early evolution of stars and planets. We aim at revealing the sub-AU disk structure around the 10 Myr old Herbig Be star HD100546 and at investigating the origin of its near and mid-infrared excess. We used AMBER/VLTI observations to resolve the K-band emission and to constrain the location and composition of the hot dust in the innermost disk. Combining AMBER observations with photometric and MIDI/VLTI measurements from the litterature, we revisit the disk geometry using a passive disk model based on 3D radiative transfer. We propose a model that includes a tenuous inner disk made of micron-sized dust grains, a gap, and a massive optically thick outer disk, that successfully reproduces the interferometric data and the SED. We locate the bulk of the K-band emission at ~0.26 AU. Assuming that this emission originates from silicate, we show that micron-sized grains are required to enable the dust to survive at such a distance from the star. As a consequence, more than 40% of the K-band flux is related to scattering, showing that direct thermal emission is not sufficient to explain the near-infrared excess. In the massive outer disk, large grains in the mid-plane are responsible for the mm emission while a surface layer of small grains allows the mid and far infrared excesses to be reproduced. Such vertical structure may be an evidence for sedimentation. The observations are consistent with a model that includes a gap until ~13 AU and a total dust mass of ~0.008 lunar mass inside it. These values together with the derived scale height (~2.5 AU) and temperature (~220 K) at the inner edge of the outer disk (r=13 AU), are consistent with recent CO observations.

We obtained near-infrared long-baseline interferometry of IRC+10420 with the AMBER instrument of ESO's Very Large Telescope Interferometer (VLTI) in low and high spectral resolution (HR) mode to probe the photosphere and the innermost circumstellar environment of this rapidly evolving yellow hypergiant. In the HR observations, the visibilities show a noticeable drop across the Brackett gamma (BrG) line on all three baselines, and we found differential phases up to -25 degrees in the redshifted part of the BrG line and a non-zero closure phase close to the line center. The calibrated visibilities were corrected for AMBER's limited field-of-view to appropriately account for the flux contribution of IRC+10420's extended dust shell. We derived FWHM Gaussian sizes of 1.05 +/- 0.07 and 0.98 +/- 0.10 mas for IRC+10420's continuum-emitting region in the H and K bands, respectively, and the BrG-emitting region can be fitted with a geometric ring model with a diameter of 4.18 +0.19/-0.09 mas, which is approximately 4 times the stellar size. The geometric model also provides some evidence that the BrG line-emitting region is elongated towards a position angle of 36 degrees, well aligned with the symmetry axis of the outer reflection nebula. The HR observations were further analyzed by means of radiative transfer modeling using CMFGEN and the 2-D Busche & Hillier codes. Our spherical CMFGEN model poorly reproduces the observed line shape, blueshift, and extension, definitively showing that the IRC+10420 outflow is asymmetric. Our 2-D radiative transfer modeling shows that the blueshifted BrG emission and the shape of the visibility across the emission line can be explained with an asymmetric bipolar outflow with a high density contrast from pole to equator (8-16), where the redshifted light is substantially diminished.

In this paper, I review how optical spectro-interferometry has become a particularly well suited technique to study the close environment of young stars, by spatially resolving both their IR continuum and line emission regions. I summarize in which ways optical interferometers have brought major insights about our understanding of the inner part of circumstellar disks, a region in which the first stages of planet formation are thought to occur. In particular, I emphasize how new methods are now enabling to probe the hot gas emission, in addition to the circumstellar dust.

This paper describes the design goals and engineering efforts that led to the realization of AMBER (Astronomical Multi BEam combineR) and to the achievement of its present performance. On the basis of the general instrumental concept, AMBER was decomposed into modules whose functions and detailed characteristics are given. Emphasis is put on the spatial filtering system, a key element of the instrument. We established a budget for transmission and contrast degradation through the different modules, and made the detailed optical design. The latter confirmed the overall performance of the instrument and defined the exact implementation of the AMBER optics. The performance was assessed with laboratory measurements and commissionings at the VLTI, in terms of spectral coverage and resolution, instrumental contrast higher than 0.80, minimum magnitude of 11 in K, absolute visibility accuracy of 1%, and differential phase stability of 1E-3 rad over one minute.

To trace the accretion and outflow processes around YSOs, diagnostic spectral lines such as the BrG 2.166 micron line are widely used, although due to a lack of spatial resolution, the origin of the line emission is still unclear. Employing the AU-scale spatial resolution which can be achieved with infrared long-baseline interferometry, we aim to distinguish between theoretical models which associate the BrG line emission with mass infall or mass outflow processes. Using the VLTI/AMBER instrument, we spatially and spectrally (R=1500) resolved the inner environment of five Herbig Ae/Be stars (HD163296, HD104237, HD98922, MWC297, V921Sco) in the BrG emission line as well as in the adjacent continuum. All objects (except MWC297) show an increase of visibility within the BrG emission line, indicating that the BrG-emitting region in these objects is more compact than the dust sublimation radius. For HD98922, our quantitative analysis reveals that the line-emitting region is compact enough to be consistent with the magnetospheric accretion scenario. For HD163296, HD104237, MWC297, and V921Sco we identify a stellar wind or a disk wind as the most likely line-emitting mechanism. We search for general trends and find that the size of the BrG-emitting region does not seem to depend on the basic stellar parameters, but correlates with the H-alpha line profile shape. We find evidence for at least two distinct BrG line-formation mechanisms. Stars with a P-Cygni H-alpha line profile and a high mass-accretion rate seem to show particularly compact BrG-emitting regions (R_BrG/R_cont<0.2), while stars with a double-peaked or single-peaked H-alpha-line profile show a significantly more extended BrG-emitting region (0.6<R_BrG/R_cont<1.4), possibly tracing a stellar wind or a disk wind.

The VLTI Spectro Imager (VSI) was proposed as a second-generation instrument of the Very Large Telescope Interferometer providing the ESO community with spectrally-resolved, near-infrared images at angular resolutions down to 1.1 milliarcsecond and spectral resolutions up to R=12000. Targets as faint as K=13 will be imaged without requiring a brighter nearby reference object. The unique combination of high-dynamic-range imaging at high angular resolution and high spectral resolution enables a scientific program which serves a broad user community and at the same time provides the opportunity for breakthroughs in many areas of astrophysic including: probing the initial conditions for planet formation in the AU-scale environments of young stars; imaging convective cells and other phenomena on the surfaces of stars; mapping the chemical and physical environments of evolved stars, stellar remnants, and stellar winds; and disentangling the central regions of active galactic nuclei and supermassive black holes. VSI will provide these new capabilities using technologies which have been extensively tested in the past and VSI requires little in terms of new infrastructure on the VLTI. At the same time, VSI will be able to make maximum use of new infrastructure as it becomes available; for example, by combining 4, 6 and eventually 8 telescopes, enabling rapid imaging through the measurement of up to 28 visibilities in every wavelength channel within a few minutes. The current studies are focused on a 4-telescope version with an upgrade to a 6-telescope one. The instrument contains its own fringe tracker and tip-tilt control in order to reduce the constraints on the VLTI infrastructure and maximize the scientific return.

51 Oph is one of the few young Be stars displaying a strong CO overtone emission at 2.3 microns in addition to the near infrared excess commonly observed in this type of stars. In this paper we first aim to locate the CO bandheads emitting region. Then, we compare its position with respect to the region emitting the near infrared continuum. We have observed 51 Oph with AMBER in low spectral resolution (R=35), and in medium spectral resolution (R=1500) centered on the CO bandheads. The medium resolution AMBER observations clearly resolve the CO bandheads. Both the CO bandheads and continuum emissions are spatially resolved by the interferometer. Using simple analytical ring models to interpret the measured visibilities, we find that the CO bandheads emission region is compact, located at $0.15_{-0.04}^{0.07}$AU from the star, and that the adjacent continuum is coming from a region further away $0.25_{-0.03}^{0.06}$AU. These results confirm the commonly invoked scenario in which the CO bandheads originate in a dust free hot gaseous disk. Furthermore, the continuum emitting region is closer to the star than the dust sublimation radius (by at least a factor two) and we suggest that hot gas inside the dust sublimation radius significantly contributes to the observed 2 $\mu$m continuum emission.

MWC 297 is a young massive nearby B[e] star. The central star has a large projected rotational velocity of 350 km/s. Despite the wealth of published observations, the nature of this object and its dust-rich surroundings is not well understood. With the present paper, we shed light on the geometrical structure of the circumstellar matter which produces the near- to mid-infrared flux excess, and construct an overall image of the source's appearance and evolutionary status. The H-, K- and N-band brightness distribution of MWC 297 is probed with the ESO interferometric spectrographs AMBER and MIDI. We have obtained visibility measurements on 3 AMBER and 12 MIDI baselines, covering a wide range of spatial frequencies. We have reconstructed the brightness distribution in H, K and N with a geometric model consisting of three Gaussian disks with different extent and brightness temperature. This model can account for the entire near- to mid-IR emission of MWC 297. The near- and mid-IR emission, including the silicate emission at 10 micron, emanates from a very compact region (FWHM < 1.5 AU) around the central star. We argue that the circumstellar matter in the MWC 297 system is organized in a disk, seen under moderate (i < 40 deg) inclination. The disk displays no inner emission-free gap at the resolution of our interferometric data. The low inclination of the disk implies that the actual rotational velocity of the star exceeds its critical velocity. We discuss the impact of this result in terms of the formation of high-mass stars, and the main-sequence evolution of classical Be stars.

In this Letter we investigate the origin of the near-infrared emission of the Herbig Ae star MWC 758 on sub-astronomical unit (AU) scales using spectrally dispersed low resolution (R=35) AMBER/VLTI interferometric observations both in the H ($1.7 \mu$m) and K ($2.2 \mu$m) bands. We find that the K band visibilities and closure phases are consistent with the presence of a dusty disk inner rim located at the dust evaporation distance (0.4 AU) while the bulk of the H band emission arises within 0.1 AU from the central star. Comparing the observational results with theoretical model predictions, we suggest that the H band emission is dominated by an hot gaseous accretion disk.

Nowadays, compact sources like surfaces of nearby stars, circumstellar environments of stars from early stages to the most evolved ones and surroundings of active galactic nuclei can be investigated at milli-arcsecond scales only with the VLT in its interferometric mode. We propose a spectro-imager, named VSI (VLTI spectro-imager), which is capable to probe these sources both over spatial and spectral scales in the near-infrared domain. This instrument will provide information complementary to what is obtained at the same time with ALMA at different wavelengths and the extreme large telescopes.

AIMS: We have found that the interferometric visibilities of VLTI-AMBER observations, extracted via the standard reduction package, are significantly biased when faint targets are concerned. The visibility biases derive from a time variable fringing effect (correlated noise) appearing on the detector. METHODS: We have developed a method to correct this bias that consists in a subtraction of the extra power due to such correlated noise, so that the real power spectrum at the spatial frequencies of the fringing artifact can be restored. RESULTS: This pre-processing procedure is implemented in a software, called AMDC and available to the community, to be run before the standard reduction package. Results obtained on simulated and real observations are presented and discussed.

We present here the current performances of the AMBER / VLTI instrument for standard use and compare these with the offered modes of the instrument. We show that the instrument is able to reach its specified precision only for medium and high spectral resolution modes, differential observables and bright objects. For absolute observables, the current achievable accuracy is strongly limited by the vibrations of the Unit Telescopes, and also by the observing procedure which does not take into account the night-long transfer function monitoring. For low-resolution mode, the current limitation is more in the data reduction side, since several effects negligible at medium spectral resolution are not taken into account in the current pipeline. Finally, for faint objects (SNR around 1 per spectral channel), electromagnetic interferences in the VLTI interferometric laboratory with the detector electronics prevents currently to get unbiased measurements. Ideas are under study to correct in the data processing side this effect, but a hardware fix should be investigated seriously since it limits seriously the effective limiting magnitude of the instrument.

We report on interferometric AMBER/VLTI observations of the recurrent nova RS Oph five days after its outburst on 2006 Feb 12. Using three baselines from 44 to 86m, and a spectral resolution of 1500, we measured the extension of the emission in the K band continuum and in the BrG and HeI2.06 micron lines. The continuum visibilities were interpreted by fitting simple geometric models consisting of uniform and Gaussian ellipses, ring and binary models. The visibilities and differential phases in the BrG line were interpreted using skewed ring models aiming to perform a limited parametric reconstruction of the extension and kinematics of the line forming region. The limited uv coverage does not allow discrimination between filled models and rings. Binary models are discarded because the measured closure phase in the continuum is close to zero. The visibilities in the lines are at a low level compared to their nearby continuum, consistent with a more extended line forming region for HeI2.06 than BrG. The ellipse models for the continuum and for the lines are highly flattened and share the same position angle. Two radial velocity fields are apparent in the BrG line: a 'slow' expanding ring-like structure (v~1800km/s), and a 'fast' structure extended in the E-W direction (v~2500-3000km/s). These results confirm the basic fireball model, contrary to the conclusions of other interferometric observations conducted by Monnier et al. (2006).

In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primarily from the contribution of the individual components of the WR+O binary system. We discuss several interpretations of the residuals, and speculate on the detection of an additional continuum component, originating from the free-free emission associated with the wind-wind collision zone (WWCZ), and contributing at most to the observed K-band flux at the 5% level. The expected absolute separation and position angle at the time of observations were 5.1&plusmn;0.9mas and 66&plusmn;15&deg; respectively. However, we infer a separation of 3.62+0.11-0.30 mas and a position angle of 73+9-11&deg;. Our analysis thus implies that the binary system lies at a distance of 368+38-13 pc, in agreement with recent spectrophotometric estimates, but significantly larger than the Hipparcos value of 258+41-31 pc.

Incoming optical interferometers will allow spectro-imaging at high angular resolution. Non-homothetic Fizeau concept combines good sensitivity and high spectral resolution capabilities. However, one critical issue is the design of the beam recombination scheme, at the heart of the instrument. We tackle the possibility of reducing the number of pixels that are coding the fringes by compressing the pupil plane. Shrinking the number of pixels -- which drastically increases with the number of recombined telescopes -- is indeed a key issue that enables to reach higher limiting magnitude, but also allows to lower the required spectral resolution and fasten the fringes reading process. By means of numerical simulations, we study the performances of existing estimators of the visibility with respect to the compression process. We show that, not only the model based estimator lead to better signal to noise ratio (SNR) performances than the Fourier ones, but above all it is the only one which prevent from introducing baseline mixing biases in the visibilities as the pupil plane compression rate increases. Furthermore, we show that moderate compression allows to keep the visibilities SNR unaffected. In the light of these conclusions, we propose an optimized pupil arrangements for 6 and 8 beam recombiners.

We investigate the origin of the $\mathrm{Br}\gamma$ emission of the Herbig Ae star HD104237 on Astronomical Unit (AU) scales. Using AMBER/VLTI at a spectral resolution R=1500 spatially resolve the emission in both the BrGamma line and the adjacent continuum. The visibility does not vary between the continuum and the BrGamma line, even though the line is strongly detected in the spectrum, with a peak intensity 35% above the continuum. This demonstrates that the line and continuum emission have similar size scales. We assume that the K-band continuum excess originates in a ``puffed-up'' inner rim of the circumstellar disk, and discuss the likely origin of BrGamma. We conclude that this emission most likely arises from a compact disk wind, launched from a region 0.2-0.5 AU from the star, with a spatial extent similar to that of the near infrared continuum emission region, i.e, very close to the inner rim location.

The AMBER instrument installed at the Very Large Telescope (VLT) combines three beams from as many telescopes to produce spectrally dispersed fringes from milli-arcsecond angular scale in the near infrared. Two years after installation, first scientific observations have been carried out during the Science Demonstration Time and the Guaranteed Time mostly on bright sources due to some VLTI limitations. In this paper, we review these first astrophysical results and we show which types of completely new information is brought by AMBER. The first astrophysical results have been mainly focusing on stellar wind structure, kinematics, and its interaction with dust usually concentrated in a disk. Because AMBER has dramatically increased the number of measures per baseline, this instrument brings strong constraints on morphology and models despite a relatively poor (u, v) coverage for each object.

We present in this paper an innovative data reduction method for single-mode interferometry. It has been specifically developed for the AMBER instrument, the three-beam combiner of the Very Large Telescope Interferometer, but can be derived for any single-mode interferometer. The algorithm is based on a direct modelling of the fringes in the detector plane. As such, it requires a preliminary calibration of the instrument in order to obtain the calibration matrix which builds the linear relationship between the interferogram and the interferometric observable, that is the complex visibility. Once the calibration procedure has been performed, the signal processing appears to be a classical least square determination of a linear inverse problem. From the estimated complex visibility, we derive the squared visibility, the closure phase and the spectral differential phase. The data reduction procedures are gathered into the so-called amdlib software, now available for the community, and presented in this paper. Furthermore, each step of this original algorithm is illustrated and discussed from various on-sky observations conducted with the VLTI, with a focus on the control of the data quality and the effective execution of the data reduction procedures. We point out the present limited performances of the instrument due to VLTI instrumental vibrations, difficult to calibrate.

There are several solutions to code the signal arising from optical long baseline multi-aperture interferometers. In this paper,we focus on the {\bf non homothetic spatial coding scheme} (multiaxial) with the fringe pattern coded along one dimension on one detector(all-in-one). After describing the physical principles governing single mode interferometers using that sort of recombination scheme, we analyze two different existing methods that measure the source visibility. The first technique, so-called Fourier estimator, consists in integrating the high frequency peak of the power spectral density of the interferogram. The second method, so-called model-based estimator, has been specifically developed for the AMBER instrument of the VLTI and deals with directly modelling the interferogram recorded on the detector. Performances of both estimators are computed in terms of Signal to Noise Ratio (SNR) of the visibility, assuming that the interferograms are perturbed by photon and detector noises. Theoretical expressions of the visibility SNR are provided, validated through numerical computations and then compared. We show that the model-based estimator offers up to 5 times better performances than the Fourier one.

The young stellar object MWC 297 has been observed with the VLT interferometer equipped with the AMBER instrument. MWC 297 has been spatially resolved in the continuum with a visibility of 0.50 as well as in the Br gamma emission line where the visibility decrease to a lower value of 0.33. This change in the visibility with the wavelength can be interpreted by the presence of an optically thick disk responsible for the visibility in the continuum and of a stellar wind traced by Br gamma and whose apparent size is 40% larger. We validate this interpretation by building a model of the stellar environment that combines a geometrically thin, optically thick accretion disk model consisting of gas and dust, and a latitude-dependent stellar wind outflowing above the disk surface. The continuum emission and visibilities obtained from this model are fully consistent with the interferometric AMBER data. They agree also with existing optical, near-infrared spectra and other broad-band near-infrared interferometric visibilities. A picture emerges in which MWC 297 is surrounded by an equatorial flat disk that is possibly still accreting and an outflowing wind which has a much higher velocity in the polar region than at the equator. [abridged]

AMBER is the first near infrared focal instrument of the VLTI. It combines three telescopes and produces spectrally resolved interferometric measures. This paper discusses some preliminary results of the first scientific observations of AMBER with three Unit Telescopes at medium (1500) and high (12000) spectral resolution. We derive a first set of constraints on the structure of the circumstellar material around the Wolf Rayet Gamma2 Velorum and the LBV Eta Carinae.

Interferometric observations with three telescopes or more provide two observables: closure phase information together with visibilities measurements. When using single-mode interferometers, both observables have to be redefined in the light of the coupling phenomenon betwe en the incoming wavefront and the fiber. We introduce in this paper the estimator of both so-called modal visibility and modal closure phase. Then, we compute the statistics of the two observables in presence of partial correction by Adaptive Optics. From this theoretical analysis, data reduction process using classical least square minimization is investigated. In the framework of the AMBER instrument, the three beams recombiner of the VLTI, we simulate the observation of a single Gaussian source and we study the performances of the interferometer in terms of diameter measurements. We show that the observation is optimized, i.e. that the Signal to Noise Ratio (SNR) of the diameter is maximal, when the full width half maximum (FWHM) of the source is roughly 1/2 of the mean resolution of the interferometer. We finally point out that in the case of an observation with 3 telescopes, neglecting the correlation between the measurements leads to overestimate the SNR by a factor of $\sqrt{2}$. We infer that in any cases, this value is an upper limit.

The VITRUV project has the objective to deliver milli-arcsecond spectro-images of the environment of compact sources like young stars, active galaxies and evolved stars to the community. This instrument of the VLTI second generation based on the integrated optics technology is able to combine from 4 to 8 beams from the VLT telescopes. Working primarily in the near infrared, it will provide intermediate to high spectral resolutions and eventually polarization analysis. This paper summarizes the result from the concept study led within the Joint Research Activity advanced instruments of the OPTICON program.

The young stellar object MWC297 is a B1.5Ve star exhibiting strong hydrogen emission lines. This object has been observed by the AMBER/VLTI instrument in 2-telescope mode in a sub-region of the K spectral band centered around the Br gamma line at 2.1656 microns. The object has not only been resolved in the continuum with a visibility of 0.50+/-0.10, but also in the Br gamma line, where the flux is about twice larger, with a visibility about twice smaller (0.33+/-0.06). The continuum emission is consistent with the expectation of an optically thick thermal emission from dust in a circumstellar disk. The hydrogen emission can be understood by the emission of a halo above the disk surface. It can be modelled as a latitudinal-dependant wind model and it explains the width, the strength and the visibibility through the emission lines. The AMBER data associated with a high resolution ISAAC spectrum constrains the apparent size of the wind but also its kinematics.

We compare performances of ground-based single-mode and multimode (speckle) interferometers in the presence of partial Adaptive Optics correction of atmospheric turbulence. It is first shown that for compact sources (i.e. sources smaller than the Airy disk of a single telescope) not entirely resolved by the interferometer, the remarkable property of spatial filtering of single-mode waveguides coupled with AO correction significantly reduces the speckle noise which arises from residual wavefront corrugations. Focusing on those sources, and in the light of the AMBER experiment (the near infrared instrument of the VLTI), we show that single-mode interferometry produces a better Signal-to-Noise Ratio on the visibility than speckle interferometry. This is true for bright sources (K < 5), and in any case as soon as Strehl ratio of 0.2 is achieved. Finally, the fiber estimator is much more robust -- by two orders of magnitude -- than the speckle estimator with respect to Strehl ratio variations during the calibration procedure. The present analysis theoretically explains why interferometry with fibers can produce visibility measurements with a very high precision, 1% or less