This paper presents the results of a set of radiative hydrodynamic (RHD) simulations of convection in the near-surface regions of a rapidly rotating star. The simulations use microphysics consistent with stellar models, and include the effects of realistic convection and radiative transfer. We find that the overall effect of rotation is to reduce the strength of turbulence. The combination of rotation and radiative cooling creates a zonal velocity profile in which the motion of fluid parcels near the surface is independent of rotation. Their motion is controlled by the strong up and down flows generated by radiative cooling. The fluid parcels in the deeper layers, on the other hand, are controlled by rotation.

Main sequence, solar-like stars (M < 1.5 Msun) have outer convective envelopes that are sufficiently thick to affect significantly their overall structure. The radii of these stars, in particular, are sensitive to the details of inefficient, super-adiabatic convection occurring in their outermost layers. The standard treatment of convection in stellar evolution models, based on the Mixing-Length Theory (MLT), provides only a very approximate description of convection in the super-adiabatic regime. Moreover, it contains a free parameter, alpha_MLT, whose standard calibration is based on the Sun, and is routinely applied to other stars ignoring the differences in their global parameters (e.g., effective temperature, gravity, chemical composition) and previous evolutionary history. In this paper, we present a calibration of alpha_MLT based on three-dimensional radiation-hydrodynamics (3D RHD) simulations of convection. The value of alpha_MLT is adjusted to match the specific entropy in the deep, adiabatic layers of the convective envelope to the corresponding value obtained from the 3D RHD simulations, as a function of the position of the star in the (log g, log T_eff) plane and its chemical composition. We have constructed a model of the present-day Sun using such entropy-based calibration. We find that its past luminosity evolution is not affected by the entropy calibration. The predicted solar radius, however, exceeds that of the standard model during the past several billion years, resulting in a lower surface temperature. This illustrative calculation also demonstrates the viability of the entropy approach for calibrating the radii of other late-type stars.

One of the largest sources of uncertainty in stellar models is caused by the treatment of convection in stellar envelopes. One dimensional stellar models often make use of the mixing length or equivalent approximations to describe convection, all of which depend on various free parameters. There have been attempts to rectify this by using 3D radiative-hydrodynamic simulations of stellar convection, and in trying to extract an equivalent mixing length from the simulations. In this paper we show that the entropy of the deeper, adiabatic layers in these simulations can be expressed as a simple function of og g and log T_{eff} which holds potential for calibrating stellar models in a simple and more general manner.

Mixing length theory is the predominant treatment of convection in stellar models today. Usually described by a single free parameter, alpha, the common practice is to calibrate it using the properties of the Sun, and apply it to all other stellar models as well. Asteroseismic data from Kepler and CoRoT provide precise properties of other stars which can be used to determine alpha as well, and a recent study of stars in the Kepler field of view found alpha to vary with metallicity. Interpreting alpha obtained from calibrated stellar models, however, is complicated by the fact that the value for alpha depends on the surface boundary condition of the stellar model, or T-tau relation. Calibrated models that use typical T-tau relations, which are static and insensitive to chemical composition, do not include the complete effect of metallicity on alpha. We use 3D radiation-hydrodynamic simulations to extract metallicity-dependent T-tau relations and use them in calibrated stellar models. We find the previously reported alpha-metallicity trend to be robust, and not significantly affected by the surface boundary condition of the stellar models.

We investigate the effect of helium abundance and $\alpha$-element enhancement on the properties of convection in envelopes of solar-like main-sequence stars stars using a grid of 3D radiation hydrodynamic simulations. Helium abundance increases the mean molecular weight of the gas, and alters opacity by displacing hydrogen. Since the scale of the effect of helium may depend on the metallicity, the grid consists of simulations with three helium abundances ($Y=0.1, 0.2, 0.3$), each with two metallicities ($Z=0.001, 0.020)$. We find that changing the helium mass fraction generally affects structure and convective dynamics in a way opposite to that of metallicity. Furthermore, the effect is considerably smaller than that of metallicity. The signature of helium differs from that of metallicity in the manner in which the photospheric velocity distribution is affected. \rev{We also find that helium abundance and surface gravity behave largely in similar ways, but differ in the way they affect the mean molecular weight}. A simple model for spectral line formation suggests that the bisectors and absolute Doppler shifts of spectral lines depends on the helium abundance. We look at the effect of $\alpha$-element enhancement and find that it has a considerably smaller effect on the convective dynamics in the SAL compared to that of helium abundance.

We examine how metallicity affects convection and overshoot in the superadiabatic layer of main sequence stars. We present results from a grid of 3D radiation hydrodynamic simulations with four metallicities ($Z=0.040$, 0.020, 0.010, 0.001), and spanning a range in effective temperature ($4950 < \rm T_{\rm eff} < 6230$). We show that changing the metallicity alters properties of the convective gas dynamics, and the structure of the superadiabatic layer and atmosphere. Our grid of simulations show that the amount of superadiabaticity, which tracks the transition from efficient to inefficient convection, \rev{is sensitive to changes in metallicity. We find that increasing the metallicity forces the location of the transition region to lower densities and pressures, and results in larger mean and turbulent velocities throughout the superadiabatic region.} We also quantify the degree of convective overshoot in the atmosphere, and show that it increases with metallicity as well.

We examine the effect of different radiative transfer schemes on the properties of 3D simulations of near-surface stellar convection in the superadiabatic layer, where energy transport transitions from fully convective to fully radiative. We employ two radiative transfer schemes that fundamentally differ in the way they cover the 3D domain. The first solver approximates domain coverage with moments, while the second solver samples the 3D domain with ray integrations. By comparing simulations that differ only in their respective radiative transfer methods, we are able to isolate the effect that radiative efficiency has on the structure of the superadiabatic layer. We find the simulations to be in good general agreement, but they show distinct differences in the thermal structure in the superadiabatic layer and atmosphere.

Stellar models generally use simple parametrizations to treat convection. The most widely used parametrization is the so-called "Mixing Length Theory" where the convective eddy sizes are described using a single number, \alpha, the mixing-length parameter. This is a free parameter, and the general practice is to calibrate \alpha using the known properties of the Sun and apply that to all stars. Using data from NASA's Kepler mission we show that using the solar-calibrated \alpha is not always appropriate, and that in many cases it would lead to estimates of initial helium abundances that are lower than the primordial helium abundance. Kepler data allow us to calibrate \alpha for many other stars and we show that for the sample of stars we have studied, the mixing-length parameter is generally lower than the solar value. We studied the correlation between \alpha and stellar properties, and we find that \alpha increases with metallicity. We therefore conclude that results obtained by fitting stellar models or by using population-synthesis models constructed with solar values of \alpha are likely to have large systematic errors. Our results also confirm theoretical expectations that the mixing-length parameter should vary with stellar properties.

We present the detection of a dust continuum source at 3-mm (CARMA) and 1.3-mm (SMA), and 12CO(2-1) emission (SMA) towards the L1451-mm dense core. These detections suggest a compact object and an outflow where no point source at mid-infrared wavelengths is detected using Spitzer. An upper limit for the dense core bolometric luminosity of 0.05 Lsun is obtained. By modeling the broadband SED and the continuum interferometric visibilities simultaneously, we confirm that a central source of heating is needed to explain the observations. This modeling also shows that the data can be well fitted by a dense core with a YSO and disk, or by a dense core with a central First Hydrostatic Core (FHSC). Unfortunately, we are not able to decide between these two models, which produce similar fits. We also detect 12CO(2-1) emission with red- and blue-shifted emission suggesting the presence of a slow and poorly collimated outflow, in opposition to what is usually found towards young stellar objects but in agreement with prediction from simulations of a FHSC. This presents the best candidate, so far, for a FHSC, an object that has been identified in simulations of collapsing dense cores. Whatever the true nature of the central object in L1451-mm, this core presents an excellent laboratory to study the earliest phases of low-mass star formation.

We present a study of the structure and dynamics of the dense gas surrounding the HH 211-mm source, using VLA observations of the ammonia (1,1) and (2,2) inversion transitions. We find the envelope around this Class 0 source has an elongated geometry, extending about 104 AU in the direction perpendicular to the well-known HH 211 jet, and exhibits a velocity distribution consistent with rotation along the major axis. Our VLA observations indicate that the envelope is mostly in virial equilibrium. However, comparing our data with results from previous studies it appears that the gas within approximately 0.005 pc of the central protostar is undergoing dynamical collapse. The size of this collapsing radius may constrain the amount of mass that can eventually infall into the forming star. We also find that the envelope is mostly internally heated, most probably by radiation from the central protostar. In addition, we detect evidence of outflow-envelope interaction in the ammonia data. These include a velocity gradient in the dense gas along the outflow axis and significant line broadening that is spatially correlated with the jet and it might be the result of outflow-induced turbulence in the envelope.

The stellar abundance ratio of Mg/Fe is an important tool in diagnostics of galaxy evolution. In order to make reliable measurements of the Mg abundance of stars, it is necessary to have accurate values for the oscillator strength (f-value) of each of the observable transitions. In metal-poor stars the Mg I 3p-4s triplet around 5175 AA (Fraunhofer's so-called b lines) are the most prominent magnesium lines. The lines also appear as strong features in the solar spectrum. We present new and improved experimental oscillator strengths for the optical Mg I 3p-4s triplet, along with experimental radiative lifetimes for six terms in Mg I. With these data we discuss the implications on previous and future abundance analyses of metal-poor stars. The oscillator strengths have been determined by combining radiative lifetimes with branching fractions, where the radiative lifetimes are measured using the laser induced fluorescence technique and the branching fractions are determined using intensity calibrated Fourier Transform (FT) spectra. The FT spectra are also used for determining new accurate laboratory wavelengths for the 3p-4s transitions. The f-values of the Mg I 3p-4s lines have been determined with an absolute uncertainty of 9 %, giving an uncertainty of +-0.04 dex in the log gf values. Compared to values previously used in abundance analyses of metal-poor stars, rescaling to the new values implies an increase of typically 0.04 dex in the magnesium abundance.

We present the first optical photometry of the counterpart to the candidate intermediate polar RX J0153.3+7446. This reveals an optical pulse period of 2333s +/- 5s. Reanalysis of the previously published ROSAT X-ray data reveals that the true X-ray pulse period is probably 1974s +/- 30s, rather than the 1414 s previously reported. Given that the previously noted orbital period of the system is 3.94 h, we are able to identify the X-ray pulse period with the white dwarf spin period and the optical pulse period with the rotation period of the white dwarf in the binary reference frame, as commonly seen in other intermediate polars. We thus confirm that RX J0153.3+7446 is indeed a typical intermediate polar.