Optical constants of non-stoichiometric amorphous magnesium-iron silicates are determined. It is demonstrated that these can well reproduce the observed mid-infrared emission spectra of evolved stars. Stoichiometric and non-stoichiometric amorphous magnesium-iron silicate films are fabricated by pulsed laser deposition. Transmittance and ellipsometry measurements are performed in the wavelength range between 2 and 200 $\mu$m and 1.7 and 33 $\mu$m, respectively. Optical constants are derived from transmittance and ellipsometric $\Psi$ and $\Delta$ spectra by means of oscillator models. The optical constants are applied in radiative transfer models for examining reproducibility of the observed spectral features of circumstellar dust shells around supergiants. The spectra of four selected supergiants are dominated by amorphous silicate dust emission in the wavelength range of 9 and 25 $\mu$m. To obtain a good fit to the observed spectra, we take into account amorphous corundum and metallic iron particles as additional dust components to account for dust emission at $\lambda<8 \mu$m and in between the two silicate features. For each of the objects, a set of model parameters (dust mass, condensation temperature) is derived by an automated optimization procedure which well reproduces the observation. Consequently, our model spectra using the new optical data find that the silicate bands at $\approx 10$ and $\approx 18 \mu$m depend on the magnesium and iron ratio in the silicate system, and that a good fit requires a significant iron content of the amorphous silicate dust component to reproduce the observed peak positions and shape of the silicate bands.

Clustering of the abundant SiO molecules has been discussed as a possible mechanism of seed particle formation for silicate dust in stellar outflows with an oxygen rich element mixture. Previous results indicated that condensation temperatures based on this mechanism are significant lower than what is really observed. This negative result strongly rests on experimental data on vapour pressure of SiO. New determinations show the older data to be seriously in error. Here we aim to check with improved data the possibility that SiO nucleation triggers the cosmic silicate dust formation. First we present results of our measurements of vapour pressure of solid SiO. Second, we use the improved vapour pressure data to re-calibrate existing experimental data on SiO nucleation from the literature. Third, we use the re-calibrated data on SiO nucleation in a simple model for dust-driven winds to determine the condensation temperature of silicate in stellar outflows from AGB stars. We show that onset of nucleation under circumstellar conditions commences at higher temperature than was previously found. Calculated condensation temperatures are still by about 100 K lower than observed ones, but this may be due to the greenhouse effect of silicate dust temperatures. The assumption that the onset of silicate dust formation in late-type M stars is triggered by cluster formation of SiO is compatible with dust condensation temperatures derived from IR observations.

Warm debris disks are a sub-sample of the large population of debris disks, and display excess emission in the mid-IR. Around solar-type stars, very few objects show emission features in mid-IR spectroscopic observations, that are attributed to small, warm silicate dust grains. The origin of this warm dust can possibly be explained either by a collision between several bodies or by transport from an outer belt. We present and analyse new far-IR Herschel/Pacs observations, supplemented by ground-based data in the mid-IR (VLTI/Midi and VLT/Visir), for one of these rare systems: the 10-16 Myr old debris disk around HD 113766 A. We improve an existing model to account for these new observations, and better constrain the spatial distribution of the dust and its composition. We underline the limitations of SED modelling and the need for spatially resolved observations. We find that the system is best described by an inner disk located within the first AU, well constrained by the Midi data, and an outer disk located between 9-13 AU. In the inner dust belt, our previous finding of Fe-rich crystalline olivine grains still holds. We do not observe time variability of the emission features over at least a 8 years time span, in a environment subjected to strong radiation pressure. The time stability of the emission features indicates that {\mu}m-sized dust grains are constantly replenished from the same reservoir, with a possible depletion of sub-{\mu}m-sized grains. We suggest that the emission features may arise from multi-composition aggregates. We discuss possible scenarios concerning the origin of the warm dust. The compactness of the innermost regions as probed by Midi, as well as the dust composition, suggest that we are witnessing the outcomes of (at least) one collision between partially differentiated bodies, in an environment possibly rendered unstable by terrestrial planetary formation.

(Abridged) Debris disks trace remnant reservoirs of leftover planetesimals in planetary systems. A handful of "warm" debris disks have been discovered in the last years, where emission in excess starts in the mid-infrared. An interesting subset within these warm debris disks are those where emission features are detected in mid-IR spectra, which points towards the presence of warm micron-sized dust grains. Given the ages of the host stars, the presence of these grains is puzzling, and questions their origin and survival in time. This study focuses on determining the mineralogy of the dust around 7 debris disks with evidence for warm dust, based on Spitzer/IRS spectroscopic data, in order to provide new insights into the origin of the dust grains. We present a new radiative transfer code dedicated to SED modeling of optically thin disks. We make use of this code on the SEDs of seven warm debris disks, in combination with recent laboratory experiments on dust optical properties. We find that most, if not all, debris disks in our sample are experiencing a transient phase, suggesting a production of small dust grains on relatively short timescales. From a mineralogical point of view, we find that enstatite grains have small abundances compared to crystalline olivine grains. The main result of our study is that we find evidences for Fe-rich crystalline olivine grains (Fe / [Mg + Fe] ~ 0.2) for several debris disks. This finding contrasts with studies of gas-rich protoplanetary disks. The presence of Fe-rich olivine grains, and the overall differences between the mineralogy of dust in Class II disks compared to debris disks suggest that the transient crystalline dust is of a new generation. We discuss possible crystallization routes to explain our results, and comment on the mechanisms that may be responsible for the production of small dust grains.

Solid state spectroscopy continues to be an important source of information on the mineralogical composition and physical properties of dust grains both in space and on planetary surfaces. With only a few exceptions, artificially produced or natural terrestrial analog materials, rather than 'real' cosmic dust grains, are the subject of solid state astrophysics. The Jena laboratory has provided a large number of data sets characterizing the UV, optical and infrared properties of such cosmic dust analogs. The present paper highlights recent developments and results achieved in this context, focussing on 'non-standard conditions' such as very low temperatures, very high temperatures and very long wavelengths.

Analysis of thermal dust emission spectra for dust mineralogy and physical grain properties depends on laboratory-measured or calculated comparison spectra. Often, the agreement between these two kinds of spectra is not satisfactory because of the strong influence of the grain morphology on the spectra. We investigate the ability of the statistical light-scattering model with a distribution of form factors (DFF model) to reproduce experimentally measured infrared extinction spectra for particles that are small compared to the wavelength. We take advantage of new experimental spectra measured for free particles dispersed in air with accompanying information on the grain morphology. For the calculations, we used DFFs that were derived for aggregates of spherical grains, as well as for compact grain shapes corresponding to Gaussian random spheres. Irregular particle shapes require a DFF similar to that of a Gaussian random sphere with sigma=0.3, whereas roundish grain shapes are best fitted with that of a fractal aggregate of a fractal dimension 2.4-1.8. In addition we used a fitting algorithm to obtain the best-fit DFFs for the various laboratory samples. In this way we can independently derive information on the shape of the grains from their infrared spectra. For anisotropic materials, different DFFs are needed for the different crystallographic axes. This is due to a theoretical problem, which is inherent to all models that are simply averaging the contributions of the crystallographic directions.

To trace the source of the unique 13, 19.5, and 28 $\mu$m emission features in the spectra of oxygen-rich circumstellar shells around AGB stars, we have compared dust extinction spectra obtained by aerosol measurements. We have measured the extinction spectra for 19 oxide powder samples of eight different types, such as Ti-compounds (TiO, TiO$_2$, Ti$_2$O$_3$, Ti$_3$O$_5$, Al$_2$TiO$_5$, CaTiO$_3$), $\alpha$-, $\gamma$-, $\chi$-$\delta$-$\kappa$-Al$_2$O$_3$, and MgAl$_2$O$_4$ in the infrared region (10 - 50 $\mu$m) paying special attention to the morphological (size, shape, and agglomeration) effects and the differences in crystal structure. Anatase (TiO$_2$) particles with rounded edges are the possible 13, 19.5 and 28 $\mu$m band carriers as the main contributor in the spectra of AGB stars, and spherically shaped nano-sized spinel and Al$_2$TiO$_5$ dust grains are possibly associated with the anatase, enhancing the prominence of the 13 $\mu$m feature and providing additional features at 28 $\mu$m. The extinction data sets obtained by the aerosol and CsI pellet measurements have been made available for public use at http://elbe.astro.uni-jena.de

The profile of the silicate 10 $\mu$m IR band contains important information about the evolutional stage of dust in circumstellar environments and the possible ongoing process of planetesimal formation. In order to extract this information, the observed band profiles are compared with calculated or laboratory-measured absorption cross sections of amorphous and crystalline grains with different sizes and compositions. We present in this study the first laboratory measurements of the 10 $\mu$m band profiles of nonembedded, i.e. free-flying, particles of amorphous and crystalline Mg$_2$SiO$_4$ (with two different particle shapes), amorphous and crystalline MgSiO$_3$, and crystalline olivine. We compare the spectra with those measured on embedded grains and discuss the potential of the new experimental method for comparison with observed spectra, as well as for future studies of agglomeration and surface manipulation of the grains.

Particle shape and aggregation have a strong influence on the spectral profiles of infrared phonon bands of solid dust grains. Calculating these effects is difficult due to the often extreme refractive index values in these bands. In this paper, we use the Discrete Dipole Approximation (DDA) and the T-matrix method to compute the absorption band profiles for simple clusters of touching spherical grains. We invest reasonable amounts of computation time in order to reach high dipole grid resolutions and take high multi-polar orders into account, respectively. The infrared phonon bands of three different refractory materials of astrophysical relevance are considered - Silicon Carbide (SiC), Wustite (FeO) and Silicon Dioxide (SiO2). We demonstrate that even though these materials display a range of material properties and therefore different strengths of the surface resonances, a complete convergence is obtained with none of the approaches. For the DDA, we find a strong dependence of the calculated band profiles on the exact dipole distribution within the aggregates, especially in the vicinity of the contact points between their spherical constituents. By applying a recently developed method to separate the material optical constants from the geometrical parameters in the DDA approach, we are able to demonstrate that the most critical material properties are those where the real part of the refractive index is much smaller than unity.

Previous computations of low temperature Rosseland and Planck mean opacities from Alexander & Ferguson (1994) are updated and expanded. The new computations include a more complete equation of state with more grain species and updated optical constants. Grains are now explicitly included in thermal equilibrium in the equation of state calculation, which allows for a much wider range of grain compositions to be accurately included than was previously the case. The inclusion of high temperature condensates such as Al$_2$O$_3$ and CaTiO$_3$ significantly affects the total opacity over a narrow range of temperatures before the appearance of the first silicate grains. The new opacity tables are tabulated for temperatures ranging from 30000 K to 500 K with gas densities from 10$^{-4}$ g cm$^{-3}$ to 10$^{-19}$ g cm$^{-3}$. Comparisons with previous Rosseland mean opacity calculations are discussed. At high temperatures, the agreement with OPAL and Opacity Project is quite good. Comparisons at lower temperatures are more divergent as a result of differences in molecular and grain physics included in different calculations. The computation of Planck mean opacities performed with the opacity sampling method are shown to require a very large number of opacity sampling wavelength points; previously published results obtained with fewer wavelength points are shown to be significantly in error. Methods for requesting or obtaining the new tables are provided.

We present opacity sampling model atmospheres, synthetic spectra and colors for brown dwarfs and very low mass stars in two limiting case of dust grain formation: 1) inefficient gravitational settling i.e. the dust is distributed according to the chemical equilibrium predictions, 2) efficient gravitational settling i.e. the dust forms and depletes refractory elements from the gas, but their opacity does not affect the thermal structure. The models include the formation of over 600 gas phase species, and 1000 liquids and crystals, and the opacities of 30 different types of grains including corundum (Al$_2$O$_3$), the magnesium aluminum spinel MgAl$_2$O$_4$, iron, enstatite (MgSiO$_3$), forsterite (Mg$_2$SiO$_4$), amorphous carbon, SiC, and a number of calcium silicates. The models extend from the beginning of the grain formation regime well into the condensation regime of water ice ($\teff= 3000 - 100$ K) and encompasses the range of $\log g= 2.5 - 6.0$ at solar metallicity. We find that silicate dust grains can form abundantly in the outer atmospheric layers of red and brown dwarfs with spectral type later than M8. The greenhouse effects of dust opacities provide a natural explanation for the peculiarly red spectroscopic distribution of the latest M dwarfs and young brown dwarfs. The grainless (Cond) models on the other hand, correspond closely to methane brown dwarfs such as Gliese 229B. We also recover that the $\lambda$5891,5897\AA Na I D and $\lambda$7687,7701\AA K I resonance doublets plays a critical role in T dwarfs where their red wing define the pseudo-continuum from the $I$ to the $Z$ bandpass.