We report our multiwavelength observations of two homologous circular-ribbon flares (CRFs) in active region 11991 on 2014 March 5, focusing on the transverse oscillations of an extreme-ultraviolet (EUV) loop excited by the flares. The transverse oscillations are of fast standing kink-mode. The first-stage oscillation triggered by the C2.8 flare is decayless with lower amplitudes (310$-$510 km). The periods (115$-$118 s) in different wavelengths are nearly the same, indicating coherent oscillations. The magnetic field of the loop is estimated to be 65$-$78 G. The second-stage oscillation triggered by the M1.0 flare is decaying with larger amplitudes (1250$-$1280 km). The periods decreases from 117 s in 211 {\AA} to 70 s in 171 {\AA}, implying a decrease of loop length or an implosion after a gradual expansion. The damping time, being 147$-$315 s, increases with the period, so that the values of $\tau/P$ are close to each other in different wavelengths. The thickness of the inhomogeneous layer is estimated to be $\sim$0\farcs45 under the assumption of resonant absorption. This is the first observation of the excitation of two kink-mode loop oscillations by two sympathetic flares. The results are important for understanding of the excitation of kink oscillations of coronal loops and hence the energy balance in the solar corona. Our findings also validate the prevalence of significantly amplified amplitudes of oscillations by successive drivers.

In this paper, we report the multiwavelength observations of a very long filament in active region (AR) 11112 on 2010 October 18. The filament was composed of two parts, the eastern part (EP) and western part (WP). We focus on longitudinal oscillations of the EP, which were enhanced by two homologous C-class flares in the same AR. The C1.3 flare was confined without a CME. Both EP and WP of the filament were slightly disturbed and survived the flare. After 5 hrs, eruption of the WP generated a C2.6 flare and a narrow, jet-like CME. Three oscillating threads (thd$_a$, thd$_b$, thd$_c$) are obviously identified in the EP and their oscillations are naturally divided into three phases by the two flares. The initial amplitude ranges from 1.6 to 30 Mm with a mean value of $\sim$14 Mm. The period ranges from 34 to 73 minutes with a mean value of $\sim$53 minutes. The curvature radii of the magnetic dips are estimated to be 29 to 133 Mm with a mean value of $\sim$74 Mm. The damping times ranges from $\sim$62 to $\sim$96 minutes with a mean value of $\sim$82 minutes. The value of $\tau/P$ is between 1.2 and 1.8. For thd$_a$ in the EP, the amplitudes were enhanced by the two flares from 6.1 Mm to 6.8 Mm after the C1.3 flare and further to 21.4 Mm after the C2.6 flare. The period variation as a result of perturbation from the flares was within 20\%. The attenuation became faster after the C2.6 flare. To the best of our knowledge, this is the first report of large-amplitude, longitudinal filament oscillations enhanced by flares. Numerical simulations reproduce the oscillations of thd$_a$ very well. The simulated amplitudes and periods are close to the observed values, while the damping time in the last phase is longer, implying additional mechanisms should be taken into account apart from radiative loss.

For the first time, we demonstrate how an MHD avalanche might occur in a multi-threaded coronal loop. Considering 23 non-potential magnetic threads within a loop, we use 3D MHD simulations to show that only one thread needs to be unstable in order to start an avalanche even when the others are below marginal stability. This has significant implications for coronal heating in that it provides for energy dissipation with a trigger mechanism. The instability of the unstable thread follows the evolution determined in many earlier investigations. However, once one stable thread is disrupted, it coalesces with a neighbouring thread and this process disrupts other nearby threads. Coalescence with these disrupted threads then occurs leading to the disruption of yet more threads as the avalanche develops. Magnetic energy is released in discrete bursts as the surrounding stable threads are disrupted. The volume integrated heating, as a function of time, shows short spikes suggesting that the temporal form of the heating is more like that of \textit{nanoflares} than of constant heating.

Context. Heating the solar corona to several million degrees requires the conversion of magnetic energy into thermal energy. In this paper, we investigate whether an unstable magnetic thread within a coronal loop can destabilise a neighbouring magnetic thread. Aims. By running a series of simulations, we aim to understand under what conditions the destabilisation of a single magnetic thread can also trigger a release of energy in a nearby thread. Methods. The 3D magnetohydrodynamics code, Lare3d, is used to simulate the temporal evolution of coronal magnetic fields during a kink instability and the subsequent relaxation process. We assume that a coronal magnetic loop consists of non-potential magnetic threads that are initially in an equilibrium state. Results. The non-linear kink instability in one magnetic thread forms a helical current sheet and initiates magnetic reconnection. The current sheet fragments, and magnetic energy is released throughout that thread. We find that, under certain conditions, this event can destabilise a nearby thread, which is a necessary requirement for starting an avalanche of energy release in magnetic threads. Conclusions. It is possible to initiate an energy release in a nearby, non-potential magnetic thread, because the energy released from one unstable magnetic thread can trigger energy release in nearby threads, provided that the nearby structures are close to marginal stability.