sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Takenaka, Ryota

Normalized to: Takenaka, R.

3 article(s) in total. 25 co-authors, from 1 to 3 common article(s). Median position in authors list is 9,0.

[1]  oai:arXiv.org:1604.00170  [pdf] - 1384228
X-ray Performance of Back-Side Illuminated Type of Kyoto's X-ray Astronomical SOI Pixel Sensor, XRPIX
Comments: Proceedings of International Workshop on SOI Pixel Detector (SOIPIX2015), Tohoku University, Sendai, Japan, 3-6, June, 2015. C15-06-03
Submitted: 2016-04-01
We have been developing X-ray SOI pixel Sensors, called "XRPIX", for future X-ray astronomy satellites that enable us to observe in the wide energy band of 0.5-40 keV. Since XRPIXs have the circuitry layer with a thickness of about 8 {\mu}m in the front side of the sensor, it is impossible to detect low energy X-rays with a front-illuminated type. So, we have been developing back-illuminated type of XRPIX with a less 1 {\mu}m dead layer in the back-side, which enables the sensitivity to reach 0.5 keV. We produced two types of back-side illuminated (BI) XRPIXs, one of which is produced in "Pizza process" which LBNL developed and the other is processed in the ion implantation and laser annealing. We irradiated both of the BI-XRPIXs with soft X-ray and investigate soft X-ray performance of them. We report results from soft X-ray evaluation test of the device.
[2]  oai:arXiv.org:1603.06540  [pdf] - 1377686
Improvement of Spectroscopic Performance using a Charge-sensitive Amplifier Circuit for an X-Ray Astronomical SOI Pixel Detector
Comments: 8 pages, 10 figures, Published for publication in JINST (published 5 June 2015), Conference proceedings for the 7th International Workshop on Semiconductor Pixel Detectors for Particles and Imaging (PIXEL2014), 1 - 5 Sep 2014, Niagara Falls
Submitted: 2016-03-21
We have been developing monolithic active pixel sensors series, named "XRPIX," based on the silicon-on-insulator (SOI) pixel technology, for future X-ray astronomical satellites. The XRPIX series offers high coincidence time resolution ({\rm \sim}1 {\rm \mu}s), superior readout time ({\rm \sim}10 {\rm \mu}s), and a wide energy range (0.5--40 keV). In the previous study, we successfully demonstrated X-ray detection by event-driven readout of XRPIX2b. We here report recent improvements in spectroscopic performance. We successfully increased the gain and reduced the readout noise in XRPIX2b by decreasing the parasitic capacitance of the sense-node originated in the buried p-well (BPW). On the other hand, we found significant tail structures in the spectral response due to the loss of the charge collection efficiency when a small BPW is employed. Thus, we increased the gain in XRPIX3b by introducing in-pixel charge sensitive amplifiers instead of having even smaller BPW. We finally achieved the readout noise of 35 e{\rm ^{-}} (rms) and the energy resolution of 320 eV (FWHM) at 6 keV without significant loss of the charge collection efficiency.
[3]  oai:arXiv.org:1408.4556  [pdf] - 1447618
Development and Performance of Kyoto's X-ray Astronomical SOI pixel (SOIPIX) sensor
Comments: 7pages, 12figures, SPIE Astronomical Telescopes and Instrumentation 2014, Montreal, Quebec, Canada. appears as Proc. SPIE 9147, Space Telescopes and Instrumentation 2014: Ultraviolet to Gamma Ray
Submitted: 2014-08-20
We have been developing monolithic active pixel sensors, known as Kyoto's X-ray SOIPIXs, based on the CMOS SOI (silicon-on-insulator) technology for next-generation X-ray astronomy satellites. The event trigger output function implemented in each pixel offers microsecond time resolution and enables reduction of the non-X-ray background that dominates the high X-ray energy band above 5--10 keV. A fully depleted SOI with a thick depletion layer and back illumination offers wide band coverage of 0.3--40 keV. Here, we report recent progress in the X-ray SOIPIX development. In this study, we achieved an energy resolution of 300~eV (FWHM) at 6~keV and a read-out noise of 33~e- (rms) in the frame readout mode, which allows us to clearly resolve Mn-K$\alpha$ and K$\beta$. Moreover, we produced a fully depleted layer with a thickness of $500~{\rm \mu m}$. The event-driven readout mode has already been successfully demonstrated.