NASA's Interface Region Imaging Spectrograph (IRIS) provides high resolution observations of the solar atmosphere through UV spectroscopy and imaging. Since the launch of IRIS in June 2013, we have conducted systematic observation campaigns in coordination with the Swedish 1-m Solar Telescope (SST) on La Palma. The SST provides complementary high-resolution observations of the photosphere and chromosphere. The SST observations include spectro-polarimetric imaging in photospheric Fe I lines and spectrally-resolved imaging in the chromospheric Ca II 8542 A, H-alpha, and Ca II K lines. We present a database of co-aligned IRIS and SST datasets that is open for analysis to the scientific community. The database covers a variety of targets including active regions, sunspots, plage, quiet Sun, and coronal holes.

We present observations of the solar chromosphere obtained simultaneously with the Atacama Large Millimeter/submillimeter Array (\emph{ALMA}) and the Interface Region Imaging Spectrograph (\emph{IRIS}). The observatories targeted a chromospheric plage region of which the spatial distribution (split between strongly and weakly magnetized regions) allowed the study of linear-like structures in isolation, free of contamination from background emission. Using these observations in conjunction with a radiative magnetohydrodynamic 2.5D model covering the upper convection zone all the way to the corona that considers non-equilibrium ionization effects, we report the detection of an on-disk chromospheric spicule with \emph{ALMA} and confirm its multithermal nature. In addition, we discuss the strikingly high degree of similarity between chromospheric plage features observed in \emph{ALMA}/Band6 and \emph{IRIS}/\ion{Si}{4} (also reproduced in our model) suggesting that \emph{ALMA}/Band6 does not observe in the low chromosphere as previously thought but rather observes the upper chromospheric parts of structures such as spicules and other bright structures above plage at geometric heights near transition region temperatures. We also show that \emph{IRIS}/\ion{Mg}{2} is not as well correlated with \emph{ALMA}/Band6 as was previously thought. For these comparisons, we propose and employ a novel empirical method for the determination of plage regions, which seems to better isolate plage from its surrounding regions as compared to other methods commonly used. We caution that isolating plage from its immediate surroundings must be done with care to mitigate stastistical bias in quantitative comparisons between different chromospheric observables. Lastly, we report indications for chromospheric heating due to traveling shocks supported by the \emph{ALMA}/Band6 observations.

Coronal rain consists of cool and dense plasma condensations formed in coronal loops as a result of thermal instability. Previous numerical simulations of thermal instability and coronal rain formation have relied on artificially adding a coronal heating term to the energy equation. To reproduce large-scale characteristics of the corona, using more realistic coronal heating prescription is necessary. We analyse coronal rain formation and evolution in a 3-dimensional radiative magnetohydrodynamic simulation spanning from convection zone to corona which is self-consistently heated by magnetic field braiding as a result of convective motions. We investigate the spatial and temporal evolution of energy dissipation along coronal loops which become thermally unstable. Ohmic dissipation in the model leads to the heating events capable of inducing sufficient chromospheric evaporation into the loop to trigger thermal instability and condensation formation. The cooling of the thermally unstable plasma occurs on timescales comparable to the duration of the individual impulsive heating events. The impulsive heating has sufficient duration to trigger thermal instability in the loop but does not last long enough to lead to coronal rain limit cycles. We show that condensations can either survive and fall into the chromosphere or be destroyed by strong bursts of Joule heating associated with a magnetic reconnection events. In addition, we find that condensations can also form along open magnetic field lines.

We present an initial study of one of the first ALMA Band 3 observations of the Sun with the aim to characterise the diagnostic potential of brightness temperatures measured with ALMA on the Sun. The observation covers 48min at a cadence of 2s targeting a Quiet Sun region at disk-centre. Corresponding time series of brightness temperature maps are constructed with the first version of the Solar ALMA Pipeline (SoAP) and compared to simultaneous SDO observations. The angular resolution of the observations is set by the synthesized beam (1.4x2.1as). The ALMA maps exhibit network patches, internetwork regions and also elongated thin features that are connected to large-scale magnetic loops as confirmed by a comparison with SDO maps. The ALMA Band 3 maps correlate best with the SDO/AIA 171, 131 and 304 channels in that they exhibit network features and, although very weak in the ALMA maps, imprints of large-scale loops. A group of compact magnetic loops is very clearly visible in ALMA Band 3. The brightness temperatures in the loop tops reach values of about 8000-9000K and in extreme moments up to 10 000K. ALMA Band 3 interferometric observations from early observing cycles already reveal temperature differences in the solar chromosphere. The weak imprint of magnetic loops and the correlation with the 171, 131, and 304 SDO channels suggests though that the radiation mapped in ALMA Band 3 might have contributions from a larger range of atmospheric heights than previously assumed but the exact formation height of Band 3 needs to be investigated in more detail. The absolute brightness temperature scale as set by Total Power measurements remains less certain and must be improved in the future. Despite these complications and the limited angular resolution, ALMA Band 3 observations have large potential for quantitative studies of the small-scale structure and dynamics of the solar chromosphere.

Numerical simulations of the solar chromosphere predict a diverse thermal structure with both hot and cool regions. Observations of plage regions in particular feature broader and brighter chromospheric lines, which suggest that they are formed in hotter and denser conditions than in the quiet-Sun, but also implies a non-thermal component whose source is unclear. We revisit the problem of the stratification of temperature and microturbulence in plage now adding millimeter continuum observations provided by ALMA to inversions of near-ultraviolet IRIS spectra as a powerful new diagnostic to disentangle the two parameters. We fit cool chromospheric holes and track the fast evolution of compact mm brightenings in the plage region. We use the STiC non-LTE inversion code to simultaneously fit real ultraviolet and millimeter spectra in order to infer the thermodynamic parameters of the plasma. We confirm the anticipated constraining potential of ALMA in non-LTE inversions of the solar chromosphere. We find significant differences between the inversion results of IRIS data alone compared to the results of a combination with the mm data: the IRIS+ALMA inversions have increased contrast and temperature range, and tend to favor lower values of microturbulence in the chromosphere of plage. The average brightness temperature of the plage region at 1.25 mm is 8500 K, but the ALMA maps also show much cooler ($\sim3000$ K) and hotter ($\sim11\,000$ K) evolving features partially seen in other diagnostics. To explain the former, the inversions require the existence of localized, low temperature regions in the chromosphere where molecules such as CO could form. The hot features could sustain such high temperatures due to non-equilibrium hydrogen ionization effects in a shocked chromosphere - a scenario that is supported by low-frequency shock wave patterns found in the MgII lines probed by IRIS.

The thermal structure of the chromosphere is regulated through a complex interaction of various heating processes, radiative cooling, and the ionization degree of the plasma. Here we study the impact on the thermal properties of the chromosphere when including the combined action of non-equilibrium ionization (NEI) of hydrogen and helium and ion-neutral interaction effects. We have performed a 2.5D radiative magnetohydrodynamic simulation including ion-neutral interaction effects by solving the generalized Ohm's law (GOL) as well as NEI for hydrogen and helium using the Bifrost code. The GOL equation includes ambipolar diffusion and the Hall term. We compare this simulation with another simulation that computes the ionization in local thermodynamic equilibrium (LTE) including ion-neutral interaction effects. Our numerical models reveal substantial thermal differences in magneto-acoustic shocks, the wake behind the shocks, spicules, low-lying magnetic loops, and the transition region. In particular, we find that heating through ambipolar diffusion in shock wakes is substantially less efficient, while in the shock fronts themselves it is more efficient, under NEI conditions than when assuming LTE.

Magnetic flux emergence has been shown to be a key mechanism for unleashing a wide variety of solar phenomena. However, there are still open questions concerning the rise of the magnetized plasma through the atmosphere, mainly in the chromosphere, where the plasma departs from local thermodynamic equilibrium (LTE) and is partially ionized. We aim to investigate the impact of the nonequilibrium (NEQ) ionization and recombination and molecule formation of hydrogen, as well as ambipolar diffusion, on the dynamics and thermodynamics of the flux emergence process. Using the Bifrost code, we performed 2.5D numerical experiments of magnetic flux emergence from the convection zone up to the corona. The experiments include the NEQ ionization and recombination of atomic hydrogen, the NEQ formation and dissociation of H2 molecules, and the ambipolar diffusion term of the Generalized Ohm's Law. Our experiments show that the LTE assumption substantially underestimates the ionization fraction in most of the emerged region, leading to an artificial increase in the ambipolar diffusion and, therefore, in the heating and temperatures as compared to those found when taking the NEQ effects on the hydrogen ion population into account. We see that LTE also overestimates the number density of H2 molecules within the emerged region, thus mistakenly magnifying the exothermic contribution of the H2 molecule formation to the thermal energy during the flux emergence process. We find that the ambipolar diffusion does not significantly affect the amount of total unsigned emerged magnetic flux, but it is important in the shocks that cross the emerged region, heating the plasma on characteristic times ranging from 0.1 to 100 s. We also briefly discuss the importance of including elements heavier than hydrogen in the equation of state so as not to overestimate the role of ambipolar diffusion in the atmosphere.

High-energy particles enter the solar atmosphere from Galactic or solar coronal sources, producing an "albedo'' source from the quiet Sun, now observable across a wide range of photon energies. The interaction of high-energy particles in a stellar atmosphere depends essentially upon the joint variation of the magnetic field and the gas, which heretofore has been characterized parametrically as P ~ B^alpha with P the gas pressure and B the magnitude of the magnetic field. We re-examine that parametrization by using a self-consistent 3D MHD model (Bifrost) and show that this relationship tends to P ~ B^{2.9+-0.1} based on the visible portions of the sample of open-field flux tubes in such a model, but with large variations from point to point. This scatter corresponds to the strong meandering of the open-field flux tubes in the lower atmosphere, which will have a strong effect on the prediction of the emission anisotropy (limb brightening). The simulations show that much of the open flux in coronal holes originates in weak-field regions within the granular pattern of the convective motions seen in the simulations.

The aim of this study is to demonstrate how the logarithmic millimeter continuum gradient observed using the Atacama Large Millimeter/submillimeter Array (ALMA) may be used to estimate optical thickness in the solar atmosphere. We discuss how using multi-wavelength millimeter measurements can refine plasma analysis through knowledge of the absorption mechanisms. Here we use sub-band observations from the publicly available science verification (SV) data, whilst our methodology will also be applicable to regular ALMA data. The spectral resolving capacity of ALMA SV data is tested using the enhancement coincident with an X-ray Bright Point (XBP) and from a plasmoid ejection event near active region NOAA12470 observed in Band 3 (84-116 GHz) on 17/12/2015. We compute the interferometric brightness temperature light-curve for both features at each of the four constituent sub-bands to find the logarithmic millimetre spectrum. We compared the observed logarithmic spectral gradient with the derived relationship with optical thickness for an isothermal plasma to estimate the structure's optical thicknesses. We conclude, within 90% confidence, that the stationary enhancement has an optical thickness between $0.02 \leq \tau \leq 2.78$, and that the moving enhancement has $0.11 \leq \tau \leq 2.78$, thus both lie near to the transition between optically thin and thick plasma at 100 GHz. From these estimates, isothermal plasmas with typical Band 3 background brightness temperatures would be expected to have electron temperatures of $\sim 7370 - 15300$ K for the stationary enhancement and between $\sim 7440 - 9560$ K for the moving enhancement, thus demonstrating the benefit of sub-band ALMA spectral analysis.

Solar observations with the Atacama Large Millimeter/submillimeter Array (ALMA) provide us with direct measurements of the brightness temperature in the solar chromosphere. We study the temperature distributions obtained with ALMA Band 6 (in four sub-bands at 1.21, 1.22, 1.29, and 1.3 mm) for various areas at, and in the vicinity of, a sunspot, comprising quasi-quiet and active regions with different amounts of underlying magnetic fields. We compare these temperatures with those obtained at near- and far-ultraviolet (UV) wavelengths (and with the line-core intensities of the optically-thin far-UV spectra), co-observed with the Interface Region Imaging Spectrograph (IRIS) explorer. These include the emission peaks and cores of the Mg II k 279.6 nm and Mg II h 280.4 nm lines as well as the line cores of C II 133.4 nm, O I 135.6 nm, and Si IV 139.4 nm, sampling the mid-to-high chromosphere and the low transition region. Splitting the ALMA sub-bands resulted in an slight increase of spatial resolution in individual temperature maps, thus, resolving smaller-scale structures compared to those produced with the standard averaging routines. We find that the radiation temperatures have different, though somewhat overlapping, distributions in different wavelengths and in the various magnetic regions. Comparison of the ALMA temperatures with those of the UV diagnostics should, however, be interpreted with great caution, the former is formed under the local thermodynamic equilibrium (LTE) conditions, the latter under non-LTE. The mean radiation temperature of the ALMA Band 6 is similar to that extracted from the IRIS C II line in all areas with exception of the sunspot and pores where the C II poses higher radiation temperatures. In all magnetic regions, the Mg II lines associate with the lowest mean radiation temperatures in our sample. These will provide constraints for future numerical models.

A dense forest of slender bright fibrils near a small solar active region is seen in high-quality narrowband Ca II H images from the SuFI instrument onboard the Sunrise balloon-borne solar observatory. The orientation of these slender Ca II H fibrils (SCF) overlaps with the magnetic field configuration in the low solar chromosphere derived by magnetostatic extrapolation of the photospheric field observed with Sunrise/IMaX and SDO/HMI. In addition, many observed SCFs are qualitatively aligned with small-scale loops computed from a novel inversion approach based on best-fit numerical MHD simulation. Such loops are organized in canopy-like arches over quiet areas that differ in height depending on the field strength near their roots.

Estimation of the sky signal from sequences of time ordered data is one of the key steps in Cosmic Microwave Background (CMB) data analysis, commonly referred to as the map-making problem. Some of the most popular and general methods proposed for this problem involve solving generalised least squares (GLS) equations with non-diagonal noise weights given by a block-diagonal matrix with Toeplitz blocks. In this work we study new map-making solvers potentially suitable for applications to the largest anticipated data sets. They are based on iterative conjugate gradient (CG) approaches enhanced with novel, parallel, two-level preconditioners. We apply the proposed solvers to examples of simulated non-polarised and polarised CMB observations, and a set of idealised scanning strategies with sky coverage ranging from nearly a full sky down to small sky patches. We discuss in detail their implementation for massively parallel computational platforms and their performance for a broad range of parameters characterising the simulated data sets. We find that our best new solver can outperform carefully-optimised standard solvers used today by a factor of as much as 5 in terms of the convergence rate and a factor of up to $4$ in terms of the time to solution, and to do so without significantly increasing the memory consumption and the volume of inter-processor communication. The performance of the new algorithms is also found to be more stable and robust, and less dependent on specific characteristics of the analysed data set. We therefore conclude that the proposed approaches are well suited to address successfully challenges posed by new and forthcoming CMB data sets.

Spherical Harmonic Transforms (SHT) are at the heart of many scientific and practical applications ranging from climate modelling to cosmological observations. In many of these areas new, cutting-edge science goals have been recently proposed requiring simulations and analyses of experimental or observational data at very high resolutions and of unprecedented volumes. Both these aspects pose formidable challenge for the currently existing implementations of the transforms. This paper describes parallel algorithms for computing SHT with two variants of intra-node parallelism appropriate for novel supercomputer architectures, multi-core processors and Graphic Processing Units (GPU). It also discusses their performance, alone and embedded within a top-level, MPI-based parallelisation layer ported from the S2HAT library, in terms of their accuracy, overall efficiency and scalability. We show that our inverse SHT run on GeForce 400 Series GPUs equipped with latest CUDA architecture ("Fermi") outperforms the state of the art implementation for a multi-core processor executed on a current Intel Core i7-2600K. Furthermore, we show that an MPI/CUDA version of the inverse transform run on a cluster of 128 Nvidia Tesla S1070 is as much as 3 times faster than the hybrid MPI/OpenMP version executed on the same number of quad-core processors Intel Nahalem for problem sizes motivated by our target applications. Performance of the direct transforms is however found to be at the best comparable in these cases. We discuss in detail the algorithmic solutions devised for major steps involved in the transforms calculation, emphasising those with a major impact on their overall performance, and elucidates the sources of the dichotomy between the direct and the inverse operations.