We present results of the combined photometric and spectroscopic analysis of three detached eclipsing binaries, which secondary components are not visible or very hard to identify in the optical spectra - ASAS J052743-0359.7, ASAS J065134-2211.5, and ASAS J073507-0905.7. The first one is a known visual binary ADS 4022, and we found that it is a quadruple system, composed of two spectroscopic binaries, one of which shows eclipses. None of the systems was previously recognized as a spectroscopic binary. We collected a number of high-resolution optical and IR spectra to calculate the radial velocities (RVs) and later combined them with MITSuME and ASAS photometry. The IR spectra were crucial for secure identification of the cooler components' lines. RV measurements were done with the TODCOR technique, and RV curves modelled with our own procedure V2FIT. Light curve modelling was performed with JKTEBOP and PHOEBE codes. Temperatures and metallicities of two systems were estimated from spectra. For the ADS 4022 system we also used the archival WDS data and new SOAR observations in order to derive the orbit of the visual pair for the first time. Ages were estimated by comparing our results with PARSEC isochrones. The eclipsing pair A052743 A ($P=5.27$ d) is composed of a 1.03(6) M$_\odot$, 1.03(2) R$_\odot$ primary and a 0.60(2) M$_\odot$, 0.59(2) R$_\odot$ secondary. The components of the $P=21.57$ d non-eclipsing pair B likely have masses in between the two eclipsing components, and both pairs are on a $\sim$188 yr orbit around their common centre of mass. The system A065134 ($P=8.22$ d) consists of a 0.956(12) M$_\odot$, 0.997(4) R$_\odot$ primary and a 0.674(5) M$_\odot$, 0.690(7) R$_\odot$ secondary. Finally, A073507 ($P=1.45$ d), which consists of a 1.452(34) M$_\odot$, 1.635(12) R$_\odot$ primary and a 0.808(13) M$_\odot$, 0.819(11) R$_\odot$ secondary, is likely a PMS system.

We have obtained high-resolution spectra of four eclipsing binary systems (FM Leo, NN Del, V963 Cen and AI Phe) with the view to gaining insight into the relative orientation of their stellar spin axes and orbital axes. The so called Rossiter-McLaughlin (RM) effect, i.e. the fact that the broadening and the amount of blue- or redshift in the spectra during an eclipse depend on the tilt of the spin axis of the background star, has the potential of reconciling observations and theoretical models if such a tilt is found. We analyse the RM effect by disentangling the spectra, removing the front component and measuring the remaining, distorted lines with a broadening function (BF) obtained from single value decomposition (SVD), weighting by the intensity centre of the BF in the eclipse. All but one of our objects show no significant misalignment, suggesting that aligned systems are dominant. We provide stellar as well as orbital parameters for our systems. With five measured spin-orbit angles we significantly increase (from 9 to 14) the number of stars for which it has been measured. The spin-orbit angle $\beta$ calculated for AI Phe's secondary component shows a misalignment of 87$\pm$17 degrees. NN Del, with a large separation of components and a long dynamical timescale for circularisation and synchronisation, is an example of a close to primordial spin-orbit angle measurement.

We present the design and commissioning of Project Solaris, a global network of autonomous observatories. Solaris is a Polish scientific undertaking aimed at the detection and characterization of circumbinary exoplanets and eclipsing binary stars. To accomplish this, a network of four fully autonomous observatories has been deployed in the Southern Hemisphere: Solaris-1 and Solaris-2 in the South African Astronomical Observatory in South Africa; Solaris-3 in Siding Spring Observatory in Australia; and Solaris-4 in Complejo Astronomico El Leoncito in Argentina. The four stations are nearly identical and are equipped with 0.5-m Ritchey-Cr\'etien (f/15) or Cassegrain (f/9, Solaris-3) optics and high-grade 2 K x 2 K CCD cameras with Johnson and Sloan filter sets. We present the design and implementation of low-level security; data logging and notification systems; weather monitoring components; all-sky vision system, surveillance system; and distributed temperature and humidity sensors. We describe dedicated grounding and lighting protection system design and robust fiber data transfer interfaces in electrically demanding conditions. We discuss the outcomes of our design, as well as the resulting software engineering requirements. We describe our system's engineering approach to achieve the required level of autonomy, the architecture of the custom high-level industry-grade software that has been designed and implemented specifically for the use of the network. We present the actual status of the project and first photometric results; these include data and models of already studied systems for benchmarking purposes (Wasp-4b, Wasp-64b, and Wasp-98b transits, PG 1663-018, an eclipsing binary with a pulsator) as well J024946-3825.6, an interesting low-mass binary system for which a complete model is provided for the first time.

We present results of our spectroscopic observations of nine detached eclipsing binaries (DEBs), selected from the $Kepler$ Eclipsing Binary Catalog, that only show one set of spectral lines. Radial velocities (RVs) were calculated from the high resolution spectra obtained with the HIDES instrument, attached to the 1.88-m telescope at the Okayama Astrophysical Observatory, and from the public APOGEE archive. In our sample we found five single-lined binaries, with one component dominating the spectrum. The orbital and light curve solutions were found for four of them, and compared with isochrones, in order to estimate absolute physical parameters and evolutionary status of the components. For the fifth case we only update the orbital parameters, and estimate the properties of the unseen star. Two other systems show orbital motion with a period known from the eclipse timing variations (ETVs). For these we obtained parameters of outer orbits, by translating the ETVs to RVs of the centre of mass of the eclipsing binary, and combining with the RVs of the outer star. Of the two remaining ones, one is most likely a blend of a faint background DEB with a bright foreground star, which lines we see in the spectra, and the last case is possibly a quadruple bearing a sub-stellar mass object. Where possible, we compare our results with literature, especially with results from asteroseismology. We also report possible detections of solar-like oscillations in our RVs.

We present the results of our spectroscopic observations of eight detached eclipsing binaries (DEBs), selected from the $Kepler$ Eclipsing Binary Catalog. Radial velocities (RVs) were calculated from high resolution spectra obtained with the HIDES pectrograph, attached to the 1.88-m telescope of the Okayama Astrophysical Observatory, and were used to characterize the targets in combination with the $Kepler$ light curves. For each binary we obtained a full set of orbital and physical parameters, reaching precision below 3% in masses and radii for 5 pairs. By comparing our results with theoretical models, we assess the distance, age and evolutionary status of the researched objects. We also study eclipse timing variations of selected objects, and identify a new system with a $\gamma$Dor pulsator. Two systems are triples, and show lines coming from three components. In one case the motion of the outer star and the perturbation in the RVs of the inner binary are clearly visible and periodical, which allows us to directly calculate the mass of the third star, and inclination of the outer orbit. In the second case we only see a clear motion of the tertiary, and investigate two scenarios: that it is a linear trend coming from the orbital motion around the inner binary, and that it is caused by a planetary mass companion. When possible, we also compare our results with the literature, and conclude that only by combining photometry with RVs it is possible to obtain correct physical parameters of both components of a DEB.

We present scientific results obtained with a recently commissioned \'{e}chelle spectrograph on the 0.5-m Solaris-1 telescope in the South African Astronomical Observatory. BACHES is a low-cost slit \'{e}chelle spectrograph that has a resolution of 21,000 at 5,500 \AA. The described setup is fully remotely operated and partly automated. Custom hardware components have been designed to allow both spectroscopic and photometric observations. The setup is controlled via dedicated software. The throughput of the system allows us to obtain spectra with an average SNR of 22 at 6375 {\AA} for a 30-min exposure of a $V=10$ mag target. The stability of the instrument is influenced mainly by the ambient temperature changes. We have obtained radial velocity RMS values for a bright (V = 5.9 mag) spectroscopic binary as good as 0.59 km s$^{-1}$ and 1.34 km s$^{-1}$ for a $V = 10.2$ mag eclipsing binary. Radial velocity measurements have been combined with available photometric light curves. We present models of six eclipsing binary systems, and for previously known targets, we compare our results with those available in the literature. Masses of binary components have been determined with 3% errors for some targets. We confront our results with benchmark values based on measurements from the HARPS and UCLES spectrographs on 4-m class telescopes and find very good agreement. The described setup is very efficient and well suited for a spectroscopic survey. We can now spectroscopically characterize about 300 eclipsing binary stars per year up to 10.2 mag assuming typical weather conditions at SAAO without a single observing trip.

We present the first full orbital and physical analysis of HD 187669, recognized by the All-Sky Automated Survey (ASAS) as the eclipsing binary ASAS J195222-3233.7. We combined multi-band photometry from the ASAS and SuperWASP public archives and 0.41-m PROMPT robotic telescopes with our high-precision radial velocities from the HARPS spectrograph. Two different approaches were used for the analysis: 1) fitting to all data simultaneously with the WD code, and 2) analysing each light curve (with JKTEBOP) and RVs separately and combining the partial results at the end. This system also shows a total primary (deeper) eclipse, lasting for about 6 days. A spectrum obtained during this eclipse was used to perform atmospheric analysis with the MOOG and SME codes in order to constrain physical parameters of the secondary. We found that ASAS J195222-3233.7 is a double-lined spectroscopic binary composed of two evolved, late-type giants, with masses of $M_1 = 1.504\pm0.004$ and $M_2=1.505\pm0.004$ M$_\odot$, and radii of $R_1 = 11.33\pm0.28$ and $R_2=22.62\pm0.50$ R$_\odot$, slightly less metal abundant than the Sun, on a $P=88.39$ d orbit. Its properties are well reproduced by a 2.38 Gyr isochrone, and thanks to the metallicity estimation from the totality spectrum and high precision in masses, it was possible to constrain the age down to 0.1 Gyr. It is the first so evolved galactic eclipsing binary measured with such a good accuracy, and as such is a unique benchmark for studying the late stages of stellar evolution.

We evaluate a pre-production BACHES \'{e}chelle spectrograph in terms of its usefulness for radial velocity surveys of binary stars with small telescopes in a remote and autonomous. We use the Solaris-4 observatory located in Casleo, Argentina, that is part of a global network of autonomous observatories as the test-bed for the instrument. The setup is designed in such a way that spectroscopy and photometry can be carried out using the same telescope without the need to mechanically modify the imaging train. We observe single spectroscopic standard stars as well as binary stars up to 9.75 mag. We present results of mechanical tests of the instruments and spectroscopic observations carried out between Nov 26th and Dec 8th 2013. We conclude that BACHES is a very compact and capable spectrograph well suited for remote and autonomous operation. Coupled to a 0.5-m telescope it is capable of obtaining spectra of 10 mag targets with a SNR of 20 for 30-minute exposures. This is a very good result considering the price and size of the instrument. It brings new possibilities to the scientific community and opens a whole new range of research opportunities available to new and existing observatories.

We present the first results of a project aiming to trace the spatial structure of the Milky Way using detached eclipsing binaries (DEBs) as distance indicators. A sample of DEBs from the OGLE-II catalogue was selected and their near infrared photometry was taken from the Vista Variables in the Via Lactea (VVV) survey. The I band OGLE-II light curves are used to create models of the DEBs, which together with the VVV photometry are compared with a set of theoretical isochrones. After correcting for stellar reddening, we find a set of absolute physical parameters of components of a given binary, including absolute magnitudes and distances. With this approach we can calculate the distances with the precision better than 5 per cent. Even though we have a few systems, the distribution is not homogeneous along the line of sight, and appears to follow the overall structure of the Galaxy - several spiral arms and the Bulge are distinguishable. A number of systems can be seen behind the Bulge, reaching even the distance to the Sagittarius dwarf galaxy.

Current precision in radial velocity (RV) measurements of binary stars reaches $\sim$2 ms$^{-1}$. This level of precision means that RV models have to take into account additional non-Keplerian effects such as tidal and rotational distortion of the components of a binary star, relativistic effects and orbital precession. We generate synthetic binaries using Yonsei-Yale stellar models. For typical representatives we investigate the impact of various orbital orientations and different non-Keplerian effects on the RV curves. To this end we simulate RV observations with an added white noise of different scale. Subsequently we try to reconstruct the input orbital parameters and their errors by fitting a model using a standard least-squares method. In particular we investigate the connection between the tidal distortion of the shape of the stars and the best-fit orbital eccentricity, the possibility of deriving orbital inclination of a non-eclipsing binary star by exploiting relativistic effects and the circumstances in which the orbital precession can be detected. We confirm that the method proposed by to obtain orbital inclination with use of the relativistic effect does work in favourable cases and that it can be used even for orbital configurations far from an edge-on orientation. We show that the RV variations imposed by tidally distorted stars can mimic non-zero eccentricity in some binaries. The scale of such an effect depends on the RV accuracy. Finally, we demonstrate that the apsidal precession can be easily detected with precision RVs. In particular we can detect orbital precession of $10^{-4}$ rad yr$^{-1}$, $10^{-3}$ rad yr$^{-1}$ for precision of RVs of 1 ms$^{-1}$ and 10 ms$^{-1}$ respectively.

We present the orbital and physical parameters of a newly discovered low-mass detached eclipsing binary from the All-Sky Automated Survey (ASAS) database: ASAS J011328-3821.1 A - a member of a visual binary system with the secondary component separated by about 1.4 seconds of arc. The radial velocities were calculated from the high-resolution spectra obtained with the 1.9-m Radcliffe/GIRAFFE, 3.9-m AAT/UCLES and 3.0-m Shane/HamSpec telescopes/spectrographs on the basis of the TODCOR technique and positions of H_alpha emission lines. For the analysis we used V and I band photometry obtained with the 1.0-m Elizabeth and robotic 0.41-m PROMPT telescopes, supplemented with the publicly available ASAS light curve of the system. We found that ASAS J011328-3821.1 A is composed of two late-type dwarfs having masses of M_1 = 0.612 +/- 0.030 M_sun, M_2 = 0.445 +/- 0.019 M_sun and radii of R_1 = 0.596 +/- 0.020 R_sun, R_2 = 0.445 +/- 0.024 R_sun, both show a substantial level of activity, which manifests in strong H_alpha and H_beta emission and the presence of cool spots. The influence of the third light on the eclipsing pair properties was also evaluated and the photometric properties of the component B were derived. Comparison with several popular stellar evolution models shows that the system is on its main sequence evolution stage and probably is more metal rich than the Sun. We also found several clues which suggest that the component B itself is a binary composed of two nearly identical ~0.5 M_sun stars.

The Light-Time Effect (LTE) is observed whenever the distance between the observer and any kind of periodic event changes in time. The usual cause of this distance change is the reflex motion about the system's barycenter due to the gravitational influence of one or more additional bodies. We analyze 5032 eclipsing contact (EC) and detached (ED) binaries from the All Sky Automated Survey (ASAS) catalogue to detect variations in the times of eclipses which possible can be due to the LTE effect. To this end we use an approach known from the radio pulsar timing where a template radio pulse of a pulsar is used as a reference to measure the times of arrivals of the collected pulses. In our analysis as a template for a photometric time series from ASAS, we use a best-fitting trigonometric series representing the light curve of a given EC or ED. Subsequently, an O-C diagram is built by comparing the template light curve with light curves obtained from subsets of a given time series. Most of the variations we detected in O-Cs correspond to a linear period change. Three show evidence of more than one complete LTE-orbit. For these objects we obtained preliminary orbital solutions. Our results demonstrate that the timing analysis employed in radio pulsar timing can be effectively used to study large data sets from photometric surveys.

The presence of a body in an orbit around a close eclipsing binary star manifests itself through the light time effect influencing the observed times of eclipses as the close binary and the circumbinary companion both move around the common centre of mass. This fact combined with the periodicity with which the eclipses occur can be used to detect the companion. Given a sufficient precision of the times of eclipses, the eclipse timing can be employed to detect substellar or even planetary mass companions. The main goal of the paper is to investigate the potential of the photometry based eclipse timing of binary stars as a method of detecting circumbinary planets. In the models we assume that the companion orbits a binary star in a circular Keplerian orbit. We analyze both the space and ground based photometry cases. In particular, we study the usefulness of the on-going COROT and Kepler missions in detecting circumbinary planets. We also explore the relations binding the planet discovery space with the physical parameters of the binaries and the geometrical parameters of their light curves. We carry out detailed numerical simulations of the eclipse timing by employing a relatively realistic model of the light curves of eclipsing binary stars. We study the influence of the white and red photometric noises on the timing precision. We determine the sensitivity of the eclipse timing technique to circumbinary planets for the ground and space based photometric observations. We provide suggestions for the best targets, observing strategies and instruments for the eclipse timing method. Finally, we compare the eclipse timing as a planet detection method with the radial velocities and astrometry.