Normalized to: Surville, C.
[1]
oai:arXiv.org:1912.09732 [pdf] - 2018312
Can chondrules be produced by the interaction of Jupiter with the
protosolar disk?
Submitted: 2019-12-20
Chondrules are crystallised droplets of silicates formed by rapid heating to
high temperatures (> 1800 K) of solid precursors followed by hours or days of
cooling. Dating of chondrules is consistent with the formation timescale of
Jupiter in the core-accretion model (1-4 Myrs). Here we investigate if the
shocks generated by a massive planet could generate flash heating episodes
necessary to form chondrules using high resolution 2D simulations with the
multi-fluid code ROSSBI. We use different radiative cooling prescriptions, i.e.
different cooling rates and models, and vary planet mass, orbit and disk
models. For long disk cooling rates (> 1000 orbits) and a massive protoplanet
(> 0.75 jupiter masses), we obtain hot enough temperatures for chondrule
formation, while using more realistic thermodynamics is not successful in the
Minimum Mass Solar Nebula (MMSN) model. However, sufficient flash heating is
achieved by a Jupiter mass planet in a 5 times more massive disk, which is a
conceivable scenario for the young solar nebula and exoplanetary systems.
Interestingly, a gap-forming massive planet triggers vortices, which can trap
dust, i.e. chondrule precursors, and generates a high pressure environment that
is consistent with cosmochemical evidence from chondrules. A massive gas giant
can thus, in principle, both stimulate the concentration of chondrule
precursors in the vicinity of the shocking regions, and flash-heat them via the
shocks.
[2]
oai:arXiv.org:1801.07509 [pdf] - 1975175
Dust-vortex instability in the regime of well-coupled grains
Submitted: 2018-01-23, last modified: 2019-08-30
We present a novel study of dust-vortex evolution in global two-fluid disk
simulations to find out if evolution toward high dust-to-gas ratios can occur
in a regime of well-coupled grains with low Stokes numbers
($St=10^{-3}-{4\times 10^{-2}}$). We design a new implicit scheme in the code
RoSSBi, to overcome the short timesteps occurring for small grain sizes. We
discover that the linear capture phase occurs self-similarly for all grain
sizes, with an intrinsic timescale (characterizing the vortex lifetime) scaling
as $1/St$. After vortex dissipation, the formation of a {{global active dust
ring}} is a generic outcome confirming our previous results obtained for larger
grains. We propose a scenario in which, irrespective of grain size, multiple
pathways can lead to local dust-to-gas ratios of order unity and above on
relatively short timescales, $< 10^5$ yr, in the presence of a vortex, even
with $St=10^{-3}$. When $St>10^{-2}$, the vortex is quickly dissipated by
two-fluid instabilities, and large dust density enhancements form in the global
dust ring. When $St<10^{-2}$, the vortex is resistant to destabilization. As a
result, dust concentrations occur locally due to turbulence developing inside
the vortex. Whatever the Stokes number, dust-to-gas ratios in the range $1-10$,
a necessary condition to trigger a subsequent streaming instability, or even a
direct gravitational instability of the dust clumps, appears to be an
inevitable outcome. Although quantitative connections with other instabilities
still need to be made, we argue that our results support a new scenario of
vortex-driven planetesimal formation.
[3]
oai:arXiv.org:1804.01093 [pdf] - 1750218
A sub-grid model for the growth of dust particles in hydrodynamical
simulations of protoplanetary disks
Submitted: 2018-04-03, last modified: 2018-09-14
We present the first 2D hydrodynamical finite volume simulations in which
dust is fully coupled with the gas, including its back-reaction onto it, and at
the same time the dust size is evolving according to coagulation and
fragmentation based on a sub-grid model. The aim of this analysis is to present
the differences occurring when dust evolution is included relative to
simulations with fixed dust size, with and without an embedded Jupiter-mass
planet that triggers gap formation. We use the two-fluid polar Godunov-type
code RoSSBi developed by Surville et al. 2016 combined with a new local
sub-grid method for dust evolution based on the model by Birnstiel et al. 2012.
We find striking differences between simulations with variable and fixed dust
sizes. The timescales for dust depletion differ significantly and yield a
completely different evolution of the dust surface density. In general sharp
features such as pile-ups of dust in the inner disk and near gap edges, when a
massive planet is present, become much weaker. This has important implications
on the interpretation of observed substructure in disks, suggesting that the
presence of a massive planet does not necessarily cause sharp gaps and rings in
the dust component. Also, particles with different dust sizes show a different
distribution, pointing to the importance of multi-wavelength synthetic
observations in order to compare with observations by ALMA and other
instruments. We also find that simulations adopting fixed intermediate particle
sizes, in the range $10^{-2} - 10^{-1}$ cm, best approximate the surface
density evolution seen in simulations with dust evolution.
[4]
oai:arXiv.org:1601.05945 [pdf] - 1510216
Dust capture and long-lived density enhancements triggered by vortices
in 2D protoplanetary disks
Submitted: 2016-01-22
We study dust capture by vortices and its long-term consequences in global
two-fluid inviscid disk simulations using a new polar grid code RoSSBi. We
perform the longest integrations so far, several hundred disk orbits, at the
highest resolution attainable in global simulations of disks with dust, namely
2048x4096 grid points. This allows to study the dust evolution well beyond
vortex dissipation. We vary a wide range of parameters, most notably the
dust-to-gas ratio in the initial setup varies in the range $10^{-3}$ to $0.1$.
Irrespective of the initial dust-to-gas ratio we find rapid concentration of
the dust inside vortices, reaching dust-to-gas ratios of order unity inside the
vortex. We present an analytical model that describes very well the dust
capture process inside vortices, finding consistent results for all dust-to-gas
ratios. A vortex streaming instability develops which causes invariably vortex
destruction. After vortex dissipation large-scale dust-rings encompassing a
disk annulus form in most cases, which sustain very high dust concentration,
approaching ratios of order unity. The rings are long lived lasting as long as
the duration of the simulations. They also develop a streaming instability,
which manifests itself in eddies at various scales within which the dust forms
compact high density clumps. Such clumps would be unstable to gravitational
collapse in absence of strong dissipation by viscous forces. When vortices are
particularly long lived, rings do not form but dust clumps inside vortices
become then long lived features and would likely undergo collapse by
gravitational instability. Rings encompass almost an Earth mass of solid
material, while even larger masses of dust do accumulate inside vortices in the
earlier stage. We argue that rapid planetesimal formation would occur in the
dust clumps inside the vortices as well as in the post-vortex ring.
[5]
oai:arXiv.org:1508.00903 [pdf] - 1273285
Vortex Formation and Evolution in Planet Harboring Disks under Thermal
Relaxation
Submitted: 2015-08-04, last modified: 2015-09-08
We study the evolution of planet-induced vortices in radially stratified
disks, with initial conditions allowing for radial buoyancy. For this purpose
we run global two dimensional hydrodynamical simulations, using the PLUTO code.
Planet-induced vortices are a product of the Rossby wave instability (RWI)
triggered in the edges of a planetary gap. In this work we assess the influence
of radial buoyancy for the development of the vortices. We found that radial
buoyancy leads to smoother planetary gaps, which generates weaker vortices.
This effect is less pronounced for locally isothermal and quasi-isothermal
(very small cooling rate) disks. We observed the formation of two generations
of vortices. The first generation of vortices is formed in the outer wall of
the planetary gap. The merged primary vortex induces accretion, depleting the
mass on its orbit. This process creates a surface density enhancement beyond
the primary vortex position. The second generation of vortices arise in this
surface density enhancement, indicating that the bump in this region is
sufficient to trigger the RWI. The merged secondary vortex is a promising
explanation for the location of the vortex in the Oph IRS48 system. Finally, we
observed a nonmonotonic behavior for the vortex lifetimes as a function of the
thermal relaxation timescale, agreeing with previous studies. The birth times
of the secondary vortices also display a nonmonotonic behavior, which is
correlated with the growth time of the primary vortex and its induced
accretion.
[6]
oai:arXiv.org:1201.3257 [pdf] - 595017
Migration of anticyclonic vortices in the protoplanetary disk
Submitted: 2012-01-16, last modified: 2012-11-27
This contribution describes the evolution of the protoplanetary disk using 2D
numerical simulations. The 2D Euler equations are solved with the finite volume
method. The numerical simulations are used to study the persistence and
migration of anticyclonic vortices. Two cases are presented : (1) vortices
produced by the Rossby Waves Instability, (2) a non-linear vortex model
initially implemented into the disk. The migration of the vortices is due to
spiral density waves excited by the vortex in the gas of the disk.
[7]
oai:arXiv.org:1104.2457 [pdf] - 1053334
AGN disks and black holes on the weighting scales
Submitted: 2011-04-13, last modified: 2011-04-27
We exploit our formula for the gravitational potential of finite size,
power-law disks to derive a general expression linking the mass of the black
hole in active galactic nuclei (AGN), the mass of the surrounding disk, its
surface density profile (through the power index s), and the differential
rotation law. We find that the global rotation curve v(R) of the disk in
centrifugal balance does not obey a power law of the cylindrical radius R
(except in the confusing case s = -2 that mimics a Keplerian motion), and
discuss the local velocity index. This formula can help to understand how, from
position-velocity diagrams, mass is shared between the disk and the black hole.
To this purpose, we have checked the idea by generating a sample of synthetic
data with different levels of Gaussian noise, added in radius. It turns out
that, when observations are spread over a large radial domain and exhibit low
dispersion (standard deviation less than 10% typically), the disk properties
(mass and s-parameter) and black hole mass can be deduced from a non linear fit
of kinematic data plotted on a (R, Rv 2)-diagram. For a deviation higher than
10%, masses are estimated fairly well from a linear regression (corresponding
to the zeroth-order treatment of the formula), but the power index s is no
longer accessible. We have applied the model to 7 AGN disks whose rotation has
already been probed through water maser emission. For NGC3393 and UGC3789, the
masses seem well constrained through the linear approach. For IC1481, the
power-law exponent s can even be deduced. Because the model is scale-free, it
applies to any kind of star/disk system. Extension to disks around young stars
showing deviation from Keplerian motion is thus straightforward.