The DKIST is designed to deliver accurate spectropolarimetric calibrations across a wide wavelength range and large field of view for solar observations. Instruments deliver spectral resolving powers up to 300,000 in multiple cameras of several instrument. We require detailed knowledge of optical coatings on all optics to ensure we can predict and calibrate the polarization behavior of the system. Optical coatings can be metals protected by many dielectric layers or several-micron thick dichroics. Strong spectral gradients up to 60deg retardance per nanometer wavelength and several percent diattenuation per nanometer wavelength are observed in such coatings. Often, optical coatings are not specified with spectral gradient targets for polarimetry in combination to both average and spectral threshold type specifications. DKIST has a suite of interchangeable dichroic beam splitters using up to 96 layers. We apply the Berreman formalism in open-source Python scripts to derive coating polarization behavior. We present high spectral resolution examples on dichroics where transmission can drop 10% with associated polarization changes over a 1 nm spectral bandpass in both mirrors and dichroics. We design dichroic coatings that pass polarization spectral gradient requirements in addition to reflectivity. We now can fit multi-layer coating designs to predict system level polarization properties of mirrors, anti-reflection coatings and dichroics at arbitrary incidence angles, high spectral resolving power on curved surfaces through optical modeling software packages. Polarization predictions for large astronomical telescopes require significant metrology efforts on individual optical components combined with systems-level modeling efforts. We show our custom-built laboratory spectropolarimeter and metrology efforts on protected metal mirrors, anti-reflection coatings and dichroic mirror samples.

Modern observatories and instruments require optics fabricated at larger sizes with more stringent performance requirements. The Daniel K. Inouye Solar Telescope will be the world's largest solar telescope at 4.0 m aperture delivering a 300 Watt beam and a 5 arc-minute field. Spatial variation of retardance is a limitation to calibration of the full field. Three polarimeters operate seven cameras simultaneously in narrow bandpasses from 380 nm to 1800 nm. The DKIST polarization calibration optics must be 120 mm in diameter at Gregorian focus to pass the beam and operate under high heat load, UV flux and environmental variability. Similar constraints apply to the instrument modulators with large beams near focal planes at F/18 to F/62. We assess how design factors can produce more spatial and spectral errors simulating elliptical retardance caused by polishing errors. We measure over 5deg circular retardance and spectral oscillations over +-2 for optics specified as strictly linear retarders. Spatial variations on scales larger than 10 mm contain 90% of the variation. Different designs can be a factor of 2 more sensitive to polishing errors with dissimilar spatial distributions even when using identical retardance bias values and materials. The calibration for the on axis beam is not impacted once circular retardance is included. Calibration of the full field is limited by spatial retardance variation unless techniques account for this variation. We show calibration retarder variation at amplitudes of 1deg retardance for field angles greater than roughly one arc minute for both quartz and MgF_2 retarders at visible wavelengths with significant variation between the three DKIST calibration retarders. We present polishing error maps to inform new calibration techniques attempting to deliver absolute accuracy of system calibration below effective cross-talk levels of 1deg retardance.

Data products from high spectral resolution astronomical polarimeters are often limited by fringes. Fringes can skew derived magnetic field properties from spectropolarimetric data. Fringe removal algorithms can also corrupt the data if the fringes and object signals are too similar. For some narrow-band imaging polarimeters, fringes change the calibration retarder properties, and dominate the calibration errors. Systems-level engineering tools for polarimetric instrumentation require accurate predictions of fringe amplitudes, periods for transmission, diattenuation and retardance. The relevant instabilities caused by environmental, thermal and optical properties can be modeled and mitigation tools developed. We create spectral polarization fringe amplitude and temporal instability predictions by applying the Berreman calculus and simple interferrometric calculations to optics in beams of varying F/ number. We then apply the formalism to super-achromatic six crystal retarders in converging beams under beam thermal loading in outdoor environmental conditions for two of the worlds largest observatories: the 10m Keck telescope and the Daniel K. Inouye Solar Telescope (DKIST). DKIST will produce a 300 Watt optical beam which has imposed stringent requirements on the large diameter six-crystal retarders, dichroic beamsplitters and internal optics. DKIST retarders are used in a converging beams with F/ ratios between 8 and 62. The fringe spectral periods, amplitudes and thermal models of retarder behavior assisted DKIST optical designs and calibration plans with future application to many astronomical spectropolarimeters. The Low Resolution Imaging Spectrograph with polarimetry (LRISp) instrument at Keck also uses six-crystal retarders in a converging F/ 13 beam in a Cassegrain focus exposed to summit environmental conditions providing observational verification of our predictions.

We outline polarization fringe predictions derived from a new application of the Berreman calculus for the Daniel K. Inouye Solar Telescope (DKIST) retarder optics. The DKIST retarder baseline design used 6 crystals, single-layer anti-reflection coatings, thick cover windows and oil between all optical interfaces. This new tool estimates polarization fringes and optic Mueller matrices as functions of all optical design choices. The amplitude and period of polarized fringes under design changes, manufacturing errors, tolerances and several physical factors can now be estimated. This tool compares well with observations of fringes for data collected with the SPINOR spectropolarimeter at the Dunn Solar Telescope using bi-crystalline achromatic retarders as well as laboratory tests. With this new tool, we show impacts of design decisions on polarization fringes as impacted by anti-reflection coatings, oil refractive indices, cover window presence and part thicknesses. This tool helped DKIST decide to remove retarder cover windows and also recommends reconsideration of coating strategies for DKIST. We anticipate this tool to be essential in designing future retarders for mitigation of polarization and intensity fringe errors in other high spectral resolution astronomical systems.

We outline polarization performance calculations and predictions for the Daniel K. Inouye Solar Telescope (DKIST) optics and show Mueller matrices for two of the first light instruments. Telescope polarization is due to polarization dependent mirror reflectivity and rotations between groups of mirrors as the telescope moves in altitude and azimuth. The Zemax optical modeling software has polarization ray-trace capabilities and predicts system performance given a coating prescription. We develop a model coating formula that approximates measured witness sample polarization properties. Estimates show the DKIST telescope Mueller matrix as functions of wavelength, azimuth, elevation, and field angle for the Cryogenic Near Infra-Red Spectro-Polarimeter (CryoNIRSP) and for the Visible SpectroPolarimeter (ViSP). Footprint variation is substantial. We estimate 2\% variation of some Mueller matrix elements over the 5 arc minute CryoNIRSP field. We validate the Zemax model by show limiting cases for flat mirrors in collimated and powered designs that compare well with theoretical approximations and are testable with lab ellipsometers.