We describe here an ongoing upgrade to the legacy Ooty Radio Telescope (ORT).The ORT is a cylindrical parabolic cylinder 530mx30m in size operating at a frequency of 326.5 (or z ~ 3.35 for the HI 21cm line). The telescope has been constructed on a north-south hill slope whose gradient is equal to the latitude of the hill, making it effectively equitorially mounted. The feed consists of an array of 1056 dipoles. The key feature of this upgrade is the digitisation and cross-correlation of the signals of every set of 4-dipoles. This converts the ORT into a 264 element interferometer with a field of view of 2 degrees x 27cos(delta) degrees . This upgraded instrument is called the Ooty Wide Field Array (OWFA). This paper briefly describes the salient features of the upgrade, as well as its main science drivers. There are three main science drivers viz. (1) Observations of the large scale distribution of HI in the post-reionisation era (2) studies of the propagation of plasma irregularities through the inner heliosphere and (3) blind surveys for transient sources. More details on the upgrade, as well as on the expected science uses can be found in other papers in this special issue.

In this paper, we review the results of interplanetary scintillation (IPS) observations made with the legacy system of the Ooty Radio Telescope (ORT) and compare them with the possibilities opened by the upgraded ORT, the Ooty Wide Field Array (OWFA). The stability and the sensitivity of the legacy system of ORT allowed the regular monitoring of IPS on a grid of large number of radio sources and the results of these studies have been useful to understand the physical processes in the heliosphere and space weather events, such as coronal mass ejections, interaction regions and their propagation effects. In the case of OWFA, its wide bandwidth of 38 MHz, the large field of view of $\sim$27$^\circ$ and increased sensitivity provide a unique capability for the heliospheric science at 326.5 MHz. IPS observations with the OWFA would allow one to monitor more than 5000 sources per day. This, in turn, will lead to much improved studies of space weather events and solar wind plasma, overcoming the limitations faced with the legacy system. We also highlight some of the specific aspects of the OWFA, potentially relevant for the studies of coronal plasma and its turbulence characteristics.

The legacy Ooty Radio Telescope (ORT) is being reconfigured as a 264-element synthesis telescope, called the Ooty Wide Field Array (OWFA). Its antenna elements are the contiguous 1.92 m sections of the parabolic cylinder. It will operate in a 38-MHz frequency band centred at 326.5 MHz and will be equipped with a digital receiver including a 264-element spectral correlator with a spectral resolution of 48 kHz. OWFA is designed to retain the benefits of equatorial mount, continuous 9-hour tracking ability and large collecting area of the legacy telescope and use modern digital techniques to enhance the instantaneous field of view by more than an order of magnitude. OWFA has unique advantages for contemporary investigations related to large scale structure, transient events and space weather watch. In this paper, we describe the RF subsystems, digitizers and fibre optic communication of OWFA and highlight some specific aspects of the system relevant for the observations planned during the initial operation.

Power-spectrum analysis is an important tool providing critical information about a signal. The range of applications includes communication-systems to DNA-sequencing. If there is interference present on a transmitted signal, it could be due to a natural cause or superimposed forcefully. In the latter case, its early detection and analysis becomes important. In such situations having a small observation window, a quick look at power-spectrum can reveal a great deal of information, including frequency and source of interference. In this paper, we present our design of a FPGA based reconfigurable platform for high performance power-spectrum analysis. This allows for the real-time data-acquisition and processing of samples of the incoming signal in a small time frame. The processing consists of computation of power, its average and peak, over a set of input values. This platform sustains simultaneous data streams on each of the four input channels.

This paper outlines some new observational and data processing techniques for enhancing the dynamic range of low frequency images obtained with the Giant Metrewave Radio Telescope. We illustrate new software tools developed to facilitate visibility editing and calibration as well as other preprocessing required to enhance the dynamic range of images from a planned survey.

A Spectral Correlator is the main component of the real time signal processing for a Radio Telescope array. The correlation of signals received at each element with every other element of the array is a classic case of an application requiring a complete graph connectivity between its data sources, as well as a very large number of simple operations to carry out the correlation. Datarates can be extremely large in order to achieve high sensitivities required for the detection of weak celestial signals. Hence, correlators are prime targets for HPC implementations. In this paper, we present the design and implementation of a massively parallel software spectral Correlator for a 44 element array. The correlator handles ~735 MB/s of incoming data from the 44 spatially distributed sources, and concurrently sustains a computational load of ~100 Gflops. We first describe how we partition the large incoming data stream into grouped datasets suited for transport over high speed serial networks, as well as ideal for processing on commodity multicore processors. An OpenMP based software correlator optimized for operation on multicore SMP systems and implemented on a set of Harpertown class dual processor machines is then presented.

A new architecture is presented for a Networked Signal Processing System (NSPS) suitable for handling the real-time signal processing of multi-element radio telescopes. In this system, a multi-element radio telescope is viewed as an application of a multi-sensor, data fusion problem which can be decomposed into a general set of computing and network components for which a practical and scalable architecture is enabled by current technology. The need for such a system arose in the context of an ongoing program for reconfiguring the Ooty Radio Telescope (ORT) as a programmable 264-element array, which will enable several new observing capabilities for large scale surveys on this mature telescope. For this application, it is necessary to manage, route and combine large volumes of data whose real-time collation requires large I/O bandwidths to be sustained. Since these are general requirements of many multi-sensor fusion applications, we first describe the basic architecture of the NSPS in terms of a Fusion Tree before elaborating on its application for the ORT. The paper addresses issues relating to high speed distributed data acquisition, Field Programmable Gate Array (FPGA) based peer-to-peer networks supporting significant on-the fly processing while routing, and providing a last mile interface to a typical commodity network like Gigabit Ethernet. The system is fundamentally a pair of two co-operative networks, among which one is part of a commodity high performance computer cluster and the other is based on Commercial-Off The-Shelf (COTS) technology with support from software/firmware components in the public domain.

Optical spectroscopic data are presented here for quasars from the Molonglo Quasar Sample (MQS), which forms part of a complete survey of 1-Jy radio sources from the Molonglo Reference Catalogue. The combination of low-frequency selection and complete identifications means that the MQS is relatively free from the orientation biases which affect most other quasar samples. To date, the sample includes 105 quasars and 6 BL Lac objects, 106 of which have now been confirmed spectroscopically. This paper presents a homogenous set of low-resolution optical spectra for 79 MQS quasars, the majority of which have been obtained at the Anglo-Australian Telescope. Full observational details are given and redshifts, continuum and emission-line data tabulated for all confirmed quasars.