Normalized to: Stodulski, M.
[2]
oai:arXiv.org:1709.04244 [pdf] - 1620692
Control Software for the SST-1M Small-Size Telescope prototype for the
Cherenkov Telescope Array
Sliusar, V.;
Walter, R.;
Alispach, C.;
Samarai, I. Al;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Coco, V.;
della Volpe, D.;
Favre, Y.;
Frankowski, A.;
Grudzińska, M.;
Heller, M.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Michałowski, J.;
Moderski, R.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ekoume, T. R. S. Njoh;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Rajda, P.;
Rafalski, J.;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Pujadas, I. Troyano;
Wiȩcek, M.;
Zagdański, A.;
Ziȩtara, K.
Submitted: 2017-09-13, last modified: 2017-09-14
The SST-1M is a 4-m Davies--Cotton atmospheric Cherenkov telescope optimized
to provide gamma-ray sensitivity above a few TeV. The SST-1M is proposed as
part of the Small-Size Telescope array for the Cherenkov Telescope Array (CTA),
the first prototype has already been deployed. The SST-1M control software of
all subsystems (active mirror control, drive system, safety system,
photo-detection plane, DigiCam, CCD cameras) and the whole telescope itself
(master controller) uses the standard software design proposed for all CTA
telescopes based on the ALMA Common Software (ACS) developed to control the
Atacama Large Millimeter Array (ALMA). Each subsystem is represented by a
separate ACS component, which handles the communication to and the operation of
the subsystem. Interfacing with the actual hardware is performed via the OPC UA
communication protocol, supported either natively by dedicated industrial
standard servers (PLCs) or separate service applications developed to wrap
lower level protocols (e.g. CAN bus, camera slow control) into OPC UA. Early
operations of the telescope without the camera were already carried out. The
camera is fully assembled and is capable to perform data acquisition using
artificial light source.
[3]
oai:arXiv.org:1709.03920 [pdf] - 1620687
Development of a strategy for calibrating the novel SiPM camera of the
SST-1M telescope proposed for the Cherenkov Telescope Array
Samarai, I. Al;
Alispach, C.;
Cadoux, F.;
Coco, V.;
della Volpe, D.;
Favre, Y.;
Heller, M.;
Montaruli, T.;
Nagai, A.;
Ekoume, T. R. S. Njoh;
Pujadas, I. Troyano;
Lyard, E.;
Neronov, A.;
Walter, R.;
Sliusar, V.;
Mach, E.;
Michałowski, J.;
Niemiec, J.;
Rafalski, J.;
Skowron, K.;
Stodulska, M.;
Stodulski, M.;
Bulik, T.;
Grudzińska, M.;
Jamrozy, M.;
Ostrowski, M.;
Stawarz, Ł.;
Zagdański, A.;
Ziȩtara, K.;
Paśko, P.;
Seweryn, K.;
Borkowski, J.;
Moderski, R.;
Kasperek, J.;
Rajda, P.;
Mandat, D.;
Pech, M.;
Schovanek, P.;
Travnicek, P.
Submitted: 2017-09-12
CTA will comprise a sub-array of up to 70 small size telescopes (SSTs) at the
southern array. The SST-1M project, a 4 m-diameter Davies Cotton telescope with
9 degrees FoV and a 1296 pixels SiPM camera, is designed to meet the
requirements of the next generation ground based gamma-ray observatory CTA in
the energy range above 3 TeV. Silicon photomultipliers (SiPM) cameras of
gamma-ray telescopes can achieve good performance even during high night sky
background conditions. Defining a fully automated calibration strategy of SiPM
cameras is of great importance for large scale production validation and online
calibration. The SST-1M sub-consortium developed a software compatible with CTA
pipeline software (CTApipe). The calibration of the SST-1M camera is based on
the Camera Test Setup (CTS), a set of LED boards mounted in front of the
camera. The CTS LEDs are operated in pulsed or continuous mode to emulate
signal and night sky background respectively. Continuous and pulsed light data
analysis allows us to extract single pixel calibration parameters to be used
during CTA operation.
[4]
oai:arXiv.org:1709.03914 [pdf] - 1620686
Performance of a small size telescope (SST-1M) camera for gamma-ray
astronomy with the Cherenkov Telescope Array
Samarai, I. Al;
Alispach, C.;
Cadoux, F.;
Coco, V.;
della Volpe, D.;
Favre, Y.;
Heller, M.;
Montaruli, T.;
Nagai, A.;
Ekoume, T. R. S. Njoh;
Pujadas, I. Troyano;
Lyard, E.;
Neronov, A.;
Walter, R.;
Sliusar, V.;
Mach, E.;
Michałowski, J.;
Niemiec, J.;
Rafalski, J.;
Skowron, K.;
Stodulska, M.;
Stodulski, M.;
Bulik, T.;
Grudzińska, M.;
Jamrozy, M.;
Ostrowski, M.;
Stawarz, Ł.;
Zagdański, A.;
Ziȩtara, K.;
Paśko, P.;
Seweryn, K.;
Borkowski, J.;
Moderski, R.;
Kasperek, J.;
Rajda, P.;
Mandat, D.;
Pech, M.;
Schovanek, P.;
Travnicek, P.
Submitted: 2017-09-12
The foreseen implementations of the Small Size Telescopes (SST) in CTA will
provide unique insights into the highest energy gamma rays offering fundamental
means to discover and under- stand the sources populating the Galaxy and our
local neighborhood. Aiming at such a goal, the SST-1M is one of the three
different implementations that are being prototyped and tested for CTA. SST-1M
is a Davies-Cotton single mirror telescope equipped with a unique camera
technology based on SiPMs with demonstrated advantages over classical
photomultipliers in terms of duty-cycle. In this contribution, we describe the
telescope components, the camera, and the trigger and readout system. The
results of the commissioning of the camera using a dedicated test setup are
then presented. The performances of the camera first prototype in terms of
expected trigger rates and trigger efficiencies for different night-sky
background conditions are presented, and the camera response is compared to
end-to-end simulations.
[6]
oai:arXiv.org:1610.01867 [pdf] - 1580349
The Single Mirror Small Sized Telescope For The Cherenkov Telescope
Array
Heller, M.;
Schioppa, E. jr;
Porcelli, A.;
Pujadas, I. Troyano;
Zietara, K.;
della Volpe, D.;
Montaruli, T.;
Cadoux, F.;
Favre, Y.;
Aguilar, J. A.;
Christov, A.;
Prandini, E.;
Rajda, P.;
Rameez, M.;
Bilnik, W.;
Blocki, J.;
Bogacz, L.;
Borkowski, J.;
Bulik, T.;
Frankowski, A.;
Grudzinska, M.;
Idzkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszalek, A.;
Miranda, L. D. Medina;
Michalowski, J.;
Moderski, R.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Pasko, P.;
Pech, M.;
Schovanek, P.;
Seweryn, K.;
Sliusar, V.;
Skowron, K.;
Stawarz, L.;
Stodulska, M.;
Stodulski, M.;
Walter, R.;
Wiecek, M.;
Zagdanski, A.;
consortium, the CTA
Submitted: 2016-10-06
The Small Size Telescope with Single Mirror (SST-1M) is one of the proposed
types of Small Size Telescopes (SST) for the Cherenkov Telescope Array (CTA).
About 70 SST telescopes will be part the CTA southern array which will also
include Medium Sized Telescopes (MST) in its threshold configuration. Optimized
for the detection of gamma rays in the energy range from 5 TeV to 300 TeV, the
SST-1M uses a Davies-Cotton optics with a 4 m dish diameter with a field of
view of 9 degrees. The Cherenkov light resulting from the interaction of the
gamma-rays in the atmosphere is focused onto a 88 cm side-to-side hexagonal
photo-detection plane. The latter is composed of 1296 hollow light guides
coupled to large area hexagonal silicon photomultipliers (SiPM). The SiPM
readout is fully digital readout as for the trigger system. The compact and
lightweight design of the SST-1M camera offers very high performance ideal for
gamma-ray observation requirement. In this contribution, the concept, design,
performance and status of the first telescope prototype are presented.
[7]
oai:arXiv.org:1607.03412 [pdf] - 1542692
An innovative silicon photomultiplier digitizing camera for gamma-ray
astronomy
Heller, Matthieu;
Schioppa, Enrico Junior;
Porcelli, Alessio;
Pujadas, Isaac Troyano;
Zietara, Krzysztof;
Della Volpe, Domenico;
Montaruli, Teresa;
Cadoux, Franck;
Favre, Yannick;
Sanchez, Juan Antonio Aguilar;
Christov, Asen;
Prandini, Elisa;
Rajda, Pawel;
Rameez, Mohamed;
Blinik, Woijciech;
Blocki, Jacek;
Bogacz, Leszek;
Borkowski, Jurek;
Bulik, Tomasz;
Frankowski, Adam;
Grudzinska, Mira;
Idzkowski, Bartosz;
Jamrozy, Mateusz;
Janiak, Mateusz;
Kasperek, Jerzy;
Lalik, Krzysztof;
Lyard, Etienne;
Mach, Emil;
Mandat, Dusan;
Marszalek, Adrian;
Miranda, Luis David Medina;
Michalowski, Jerzy;
Neronov, Andrii;
Niemiec, Jacek;
Ostrowski, Michal;
Pasko, Pawel;
Pech, Miroslav;
Schovanek, Petr;
Seweryn, Karol;
Sliusar, Vitalii;
Skowron, Krzysztof;
Stawarz, Lukasz;
Stodulska, Magdalena;
Stodulski, Marek;
Walter, Roland;
Wiecek, Marek;
Zagdanski, Aleksander
Submitted: 2016-07-12
The single-mirror small-size telescope (SST-1M) is one of the three proposed
designs for the small-size telescopes (SSTs) of the Cherenkov Telescope Array
(CTA) project. The SST-1M will be equipped with a 4 m-diameter segmented mirror
dish and an innovative fully digital camera based on silicon photo-multipliers
(SiPMs). Since the SST sub-array will consist of up to 70 telescopes, the
challenge is not only to build a telescope with excellent performance, but also
to design it so that its components can be commissioned, assembled and tested
by industry. In this paper we review the basic steps that led to the design
concepts for the SST-1M camera and the ongoing realization of the first
prototype, with focus on the innovative solutions adopted for the photodetector
plane and the readout and trigger parts of the camera. In addition, we report
on results of laboratory measurements on real scale elements that validate the
camera design and show that it is capable of matching the CTA requirements of
operating up to high-moon-light background conditions.
[9]
oai:arXiv.org:1509.01824 [pdf] - 1938100
Prototype of the SST-1M Telescope Structure for the Cherenkov Telescope
Array
Niemiec, J.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Borkowski, J.;
Bulik, T .;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Montaruli, T.;
Neronov, A.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Prandini, E.;
Rajda, P.;
Rameez, M.;
Schioppa, E. jr.;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Pujadas, I. Troyano;
Toscano, S.;
Walter, R.;
Wiȩcek, M.;
Zagdański, A.;
Ziȩtara, K.;
Żychowski, P.
Submitted: 2015-09-06
A single-mirror small-size (SST-1M) Davies-Cotton telescope with a dish
diameter of 4 m has been built by a consortium of Polish and Swiss institutions
as a prototype for one of the proposed small-size telescopes for the southern
observatory of the Cherenkov Telescope Array (CTA). The design represents a
very simple, reliable, and cheap solution. The mechanical structure prototype
with its drive system is now being tested at the Institute of Nuclear Physics
PAS in Krakow. Here we present the design of the prototype and results of the
performance tests of the structure and the drive and control system.
[10]
oai:arXiv.org:1509.01368 [pdf] - 1271716
Developments of a new mirror technology for the Cherenkov Telescope
Array
Submitted: 2015-09-04
The Cherenkov Telescope Array (CTA) observatory for very high-energy gamma
rays will consist of about a hundred of imaging atmospheric Cherenkov
telescopes (IACTs) of different size with a total reflective area of about
10,000 m$^2$. Here we present a novel technology for the production of IACT
mirrors that has been developed in the Institute of Nuclear Physics PAS in
Krakow, Poland. The mirrors are made by cold-slumping of the front reflecting
aluminium-coated panel and the rear panel interspaced with aluminium spacers.
Each panel is built of two glass panels laminated with a layer of a fibreglass
tissue in between for reinforcement of the structure against mechanical damage.
The mirror structure is open and does not require a perfect sealing needed in
closed-type designs. It prohibits water to be trapped inside and enables a
proper ventilation of the mirror. Full-size hexagonal prototype mirrors
produced for the medium-sized CTA telescopes will be presented together with
the results of recent comprehensive optical and durability tests. Their design
will be compared to the earlier technology developed at INP PAS that used a
rigid flat open support structure with a reflective layer made by cold-slumping
of the coated glass panel to the cast-in-mould spherical epoxy resin layer.
[11]
oai:arXiv.org:1509.00266 [pdf] - 1938092
Using muon rings for the optical throughput calibration of the SST-1M
prototype for the Cherenkov Telescope Array
Toscano, S.;
Prandini, E.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Rameez, M.;
Rajda, P.;
Schioppa, E. jr.;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Pujadas, I. Troyano;
Walter, R.;
Więcek, M.;
Zagdański, A.;
Ziętara, K.;
Żychowski, P.
Submitted: 2015-09-01
Imaging Atmospheric Cherenkov Telescopes (IACTs) are ground-based instruments
devoted to the study of very high energy gamma-rays coming from space. The
detection technique consists of observing images created by the Cherenkov light
emitted when gamma rays, or more generally cosmic rays, propagate through the
atmosphere. While in the case of protons or gamma-rays the images present a
filled and more or less elongated shape, energetic muons penetrating the
atmosphere are visualised as characteristic circular rings or arcs. A
relatively simple analysis of the ring images allows the reconstruction of all
the relevant parameters of the detected muons, such as the energy, the impact
parameter, and the incoming direction, with the final aim to use them to
calibrate the total optical throughput of the given IACT telescope. We present
the results of preliminary studies on the use of images created by muons as
optical throughput calibrators of the single mirror small size telescope
prototype SST-1M proposed for the Cherenkov Telescope Array.
[12]
oai:arXiv.org:1508.07472 [pdf] - 1941990
Software design for the control system for Small-Size Telescopes with
single-mirror of the Cherenkov Telescope Array
Porcelli, A.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Borkowski, J.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Rameez, M.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Prandini, E.;
Rajda, P.;
Schioppa, E. jr;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Pujadas, I. Troyano;
Toscano, S.;
Walter, R.;
Wiȩcek, M.;
Zagdański, A.;
Ziȩtara, K.;
Zychowski, P.
Submitted: 2015-08-29
The Small-Size Telescope with single-mirror (SST-1M) is a 4 m Davies-Cotton
telescope and is among the proposed telescope designs for the Cherenkov
Telescope Array (CTA). It is conceived to provide the high-energy ($>$ few TeV)
coverage. The SST-1M contains proven technology for the telescope structure and
innovative electronics and photosensors for the camera. Its design is meant to
be simple, low-budget and easy-to-build industrially.
Each device subsystem of an SST-1M telescope is made visible to CTA through a
dedicated industrial standard server. The software is being developed in
collaboration with the CTA Medium-Size Telescopes to ensure compatibility and
uniformity of the array control. Early operations of the SST-1M prototype will
be performed with a subset of the CTA central array control system based on the
Alma Common Software (ACS). The triggered event data are time stamped,
formatted and finally transmitted to the CTA data acquisition.
The software system developed to control the devices of an SST-1M telescope
is described, as well as the interface between the telescope abstraction to the
CTA central control and the data acquisition system.
[13]
oai:arXiv.org:1508.06795 [pdf] - 1938078
Development of the optical system for the SST-1M telescope of the
Cherenkov Telescope Array observatory
Seweryn, K.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Chruślińska, M.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Prandini, E.;
Pueschel, E.;
Rajda, P.;
Rameez, M.;
Rozwadowski, P.;
Schioppa, E. jr;
Schovanek, P.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Toscano, S.;
Pujadas, I. Troyano;
Walter, R.;
Wiȩcek, M.;
Zagdański, A.;
Ziȩtara, K.;
Żychowski, P.;
Barciński, T.;
Karczewski, M.;
Kukliński, J. Nicolau;
Płatos, Ł.;
Rataj, M.;
Wawer, P.;
Wawrzaszek, R.
Submitted: 2015-08-27
The prototype of a Davies-Cotton small size telescope (SST-1M) has been
designed and developed by a consortium of Polish and Swiss institutions and
proposed for the Cherenkov Telescope Array (CTA) observatory. The main purpose
of the optical system is to focus the Cherenkov light emitted by extensive air
showers in the atmosphere onto the focal plane detectors. The main component of
the system is a dish consisting of 18 hexagonal mirrors with a total effective
collection area of 6.47 m2 (including the shadowing and estimated mirror
reflectivity). Such a solution was chosen taking into account the analysis of
the Cherenkov light propagation and based on optical simulations. The proper
curvature and stability of the dish is ensured by the mirror alignment system
and the isostatic interface to the telescope structure. Here we present the
design of the optical subsystem together with the performance measurements of
its components.
[14]
oai:arXiv.org:1508.06397 [pdf] - 1938071
Camera calibration strategy of the SST-1M prototype of the Cherenokov
Telescope Array
Prandini, E.;
Heller, M.;
Lyard, E.;
Schioppa, E. jr.;
Neronov, A.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Montaruli, T.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Rameez, M.;
Rajda, P.;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Toscano, S.;
Pujadas, I. Troyano;
Walter, R.;
Więcek, M.;
Zagdański, A.;
Ziętara, K.;
Żychowski, P.
Submitted: 2015-08-26
The SST-1M telescope is one of the prototypes under construction proposed to
be part of the future Cherenkov Telescope Array. It uses a standard
Davis-Cotton design for the optics and telescope structure, with a dish
diameter of 4 meters and a large field-of-view of 9 degrees.
The innovative camera design is composed of a photo-detection plane with 1296
pixels including entrance window, light concentrators, Silicon Photomultipliers
(SiPMs), and pre-amplifier stages together with a fully digital readout and
trigger electronics, DigiCam.
In this contribution we give a general description of the analysis chain
designed for the SST-1M prototype. In particular we focus on the calibration
strategy used to convert the SiPM signals registered by DigiCam to the
quantities needed for Cherenkov image analysis. The calibration is based on an
online feedback system to stabilize the gain of the SiPMs, as well as dedicated
events (dark count, pedestal, and light flasher events) to be taken during the
normal operation of the prototype.
[15]
oai:arXiv.org:1508.06453 [pdf] - 1266989
The SST-1M camera for the Cherenkov Telescope Array
Schioppa, E. J.;
Cadoux, F.;
Christov, A.;
della Volpe, D.;
Favre, Y.;
Heller, M.;
Montaruli, T.;
Porcelli, A.;
Rameez, M.;
Pujadas, I. Troyano;
Bilnik, W.;
Blocki, J.;
Bogacz, L.;
Bulik, T.;
Curylo, M.;
Dyrda, M.;
Frankowski, A.;
Grudniki, L.;
Grudzinska, M.;
Idzkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszalek, A.;
Michaowski, J.;
Moderski, R.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Pasko, P.;
Pech, M.;
Prandini, E.;
Rajda, P.;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowinski, M.;
Stawarz, L.;
Stodulska, M.;
Stodulski, M.;
Toscano, S.;
Walter, R.;
Wiecek, M.;
Zagdanski, A.;
Zietara, K.;
Zychowski, P.
Submitted: 2015-08-26
The prototype camera of the single-mirror Small Size Telescopes (SST-1M)
proposed for the Cherenkov Telescope Array (CTA) project has been designed to
be very compact and to deliver high performance over thirty years of operation.
The camera is composed of an hexagonal photo-detection plane made of custom
designed large area hexagonal silicon photomultipliers and a high throughput,
highly configurable, fully digital readout and trigger system (DigiCam). The
camera will be installed on the telescope structure at the H.
Niewodnicza{\'n}ski institute of Nuclear Physics in Krakow in fall 2015. In
this contribution, we review the steps that led to the development of the
innovative photo-detection plane and readout electronics, and we describe the
test and calibration strategy adopted.
[16]
oai:arXiv.org:1508.06459 [pdf] - 1938074
Performance of the SST-1M telescope for the Cherenkov Telescope Array
observatory
Moderski, R.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Chruślińska, M.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Prandini, E.;
Pueschel, E.;
Rajda, P.;
Rameez, M.;
Rozwadowski, P.;
Schioppa, E. jr;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Toscano, S.;
Pujadas, I. Troyano;
Walter, R.;
Wiȩcek, M.;
Zagdański, A.;
Ziȩtara, K.;
Żychowski, P.
Submitted: 2015-08-26
The single mirror small-size telescope (SST-1M) is one of the telescope
projects being proposed for the Cherenkov Telescope Array observatory by a
sub-consortium of Polish and Swiss institutions. The SST-1M prototype structure
is currently being constructed at the Institute of Nuclear Physics in Cracow,
Poland, while the camera will be assembled at the University of Geneva,
Switzerland. This prototype enables measurements of parameters having a
decisive influence on the telescope performance. We present results of
numerical simulations of the SST-1M performance based on such measurements. The
telescope effective area, the expected trigger rates and the optical point
spread function are calculated.
[17]
oai:arXiv.org:1508.06082 [pdf] - 1265844
DigiCam - Fully Digital Compact Read-out and Trigger Electronics for the
SST-1M Telescope proposed for the Cherenkov Telescope Array
Rajda, P.;
Ziętara, K.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Rameez, M.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Prandini, E.;
Schioppa, E. jr;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Toscano, S.;
Pujadas, I. Troyano;
Walter, R.;
Więcek, M.;
Zagdański, A.;
Żychowski, P.
Submitted: 2015-08-25
The SST-1M is one of three prototype small-sized telescope designs proposed
for the Cherenkov Telescope Array, and is built by a consortium of Polish and
Swiss institutions. The SST-1M will operate with DigiCam - an innovative,
compact camera with fully digital read-out and trigger electronics. A high
level of integration will be achieved by massively deploying state-of-the-art
multi-gigabit transmission channels, beginning from the ADC flash converters,
through the internal data and trigger signals transmission over backplanes and
cables, to the camera's server link. Such an approach makes it possible to
design the camera to fit the size and weight requirements of the SST-1M
exactly, and provide low power consumption, high reliability and long lifetime.
The structure of the digital electronics will be presented, along with main
physical building blocks and the internal architecture of FPGA functional
subsystems.
[18]
oai:arXiv.org:1310.1713 [pdf] - 728971
Status of the technologies for the production of the Cherenkov Telescope
Array (CTA) mirrors
Pareschi, G.;
Armstrong, T.;
Baba, H.;
Bähr, J.;
Bonardi, A.;
Bonnoli, G.;
Brun, P.;
Canestrari, R.;
Chadwick, P.;
Chikawa, M.;
Carton, P. -H.;
de Souza, V.;
Dipold, J.;
Doro, M.;
Durand, D.;
Dyrda, M.;
Förster, A.;
Garczarczyk, M.;
Giro, E.;
Glicenstein, J. -F.;
Hanabata, Y.;
Hayashida, M.;
Hrabovski, M.;
Jeanney, C.;
Kagaya, M.;
Katagiri, H.;
Lessio, L.;
Mandat, D.;
Mariotti, M.;
Medina, C.;
Michałowski, J.;
Micolon, P.;
Nakajima, D.;
Niemiec, J.;
Nozato, A.;
Palatka, M.;
Pech, M.;
Peyaud, B.;
Pühlhofer, G.;
Rataj, M.;
Rodeghiero, G.;
Rojas, G.;
Rousselle, J.;
Sakonaka, R.;
Schovanek, P.;
Seweryn, K.;
Schultz, C.;
Shu, S.;
Stinzing, F.;
Stodulski, M.;
Teshima, M.;
Travniczek, P.;
van Eldik, C.;
Vassiliev, V.;
Wiśniewski, Ł.;
Wörnlein, A.;
Yoshida, T.
Submitted: 2013-10-07
The Cherenkov Telescope Array (CTA) is the next generation very high-energy
gamma-ray observatory, with at least 10 times higher sensitivity than current
instruments. CTA will comprise several tens of Imaging Atmospheric Cherenkov
Telescopes (IACTs) operated in array-mode and divided into three size classes:
large, medium and small telescopes. The total reflective surface could be up to
10,000 m2 requiring unprecedented technological efforts. The properties of the
reflector directly influence the telescope performance and thus constitute a
fundamental ingredient to improve and maintain the sensitivity. The R&D status
of lightweight, reliable and cost-effective mirror facets for the CTA telescope
reflectors for the different classes of telescopes is reviewed in this paper.
[20]
oai:arXiv.org:1307.6313 [pdf] - 1941905
The Formation of Condensation on Cherenkov Telescope Mirrors
Submitted: 2013-07-24
The mirrors of imaging atmospheric Cherenkov telescopes are different from
those of conventional astronomical telescopes in several ways, not least in
that they are exposed to the elements. One of the issues which may arise is
condensation forming on the mirrors during observing under certain atmospheric
conditions, which has important consequences for the operation of the
telescopes. This contribution discusses why telescope mirrors suffer
condensation and describes the atmospheric conditions and mirror designs which
are likely to be problematic.
[21]
oai:arXiv.org:1307.4563 [pdf] - 1943147
Mirror Development for the Cherenkov Telescope Array
Förster, A.;
Armstrong, T.;
Baba, H.;
Bähr, J.;
Bonardi, A.;
Bonnoli, G.;
Brun, P.;
Canestrari, R.;
Chadwick, P.;
Chikawa, M.;
Carton, P. -H.;
De Souza, V.;
Dipold, J.;
Doro, M.;
Durand, D.;
Dyrda, M.;
Giro, E.;
Glicenstein, J. -F.;
Hanabata, Y.;
Hayashida, M.;
Hrabovski, M.;
Jeanney, C.;
Kagaya, M.;
Katagiri, H.;
Lessio, L.;
MANDAT, D.;
Mariotti, M.;
Medina, C.;
Michałowski, J.;
Micolon, P.;
Nakajima, D.;
Niemiec, J.;
Nozato, A.;
Palatka, M.;
Pareschi, G.;
Pech, M.;
Peyaud, B.;
Pühlhofer, G.;
Rataj, M.;
Rodeghiero, G.;
Rojas, G.;
Rousselle, J.;
Sakonaka, R.;
Schovanek, P.;
Seweryn, K.;
Schultz, C.;
Shu, S.;
Stinzing, F.;
Stodulski, M.;
Teshima, M.;
Travniczek, P.;
Van Eldik, C.;
Vassiliev, V.;
Wiśniewski, Ł.;
Wörnlein, A.;
Yoshida, T.
Submitted: 2013-07-17
The Cherenkov Telescope Array (CTA) is a planned observatory for very-high
energy gamma-ray astronomy. It will consist of several tens of telescopes of
different sizes, with a total mirror area of up to 10,000 square meters. Most
mirrors of current installations are either polished glass mirrors or
diamond-turned aluminium mirrors, both labour intensive technologies. For CTA,
several new technologies for a fast and cost-efficient production of
light-weight and reliable mirror substrates have been developed and industrial
pre-production has started for most of them. In addition, new or improved
aluminium-based and dielectric surface coatings have been developed to increase
the reflectance over the lifetime of the mirrors compared to those of current
Cherenkov telescope instruments.
[22]
oai:arXiv.org:1307.4189 [pdf] - 1937878
Single-Mirror Small-Size Telescope structure for the Cherenkov Telescope
Array
Submitted: 2013-07-16
A single-mirror small-size (1M-SST) Davies-Cotton telescope has been proposed
for the southern observatory of the Cherenkov Telescope Array (CTA) by a
consortium of scientific institutions from Poland, Switzerland, and Germany.
The telescope has a 4 m diameter reflector and will be equipped with a fully
digital camera based on Geiger avalanche photodiodes (APDs). Such a design is
particularly interesting for CTA because it represents a very simple, reliable,
and cheap solution for a SST. Here we present the design and the
characteristics of the mechanical structure of the 1M-SST telescope and its
drive system. We also discuss the results of a finite element method analysis
in order to demonstrate the conformance of the design with the CTA
specifications and scientific objectives. In addition, we report on the current
status of the construction of a prototype telescope structure at the Institute
of Nuclear Physics PAS in Krakow.
[23]
oai:arXiv.org:1307.4275 [pdf] - 693283
Open-structure composite mirrors for the Cherenkov Telescope Array
Submitted: 2013-07-16
The Cherenkov Telescope Array (CTA) Observatory for high-energy gamma-ray
astronomy will comprise several tens of imaging atmospheric Cherenkov
telescopes (IACTs) of different size with a total reflective area of about
10,000 m$^2$. Here we present a new technology for the production of IACT
mirrors that has been developed in the Institute of Nuclear Physics PAS in
Krakow, Poland. An open-structure composite mirror consists of a rigid flat
sandwich support structure and cast-in-mould spherical epoxy resin layer. To
this layer a thin glass sheet complete with optical coating is cold-slumped to
provide the spherical reflective layer of the mirror. The main components of
the sandwich support structure are two flat float glass panels inter spaced
with V-shape aluminum spacers of equal length. The sandwich support structure
is open, thus enabling good cooling and ventilation of the mirror. A special
arrangement of the aluminum spacers also prohibits water being trapped inside.
The open-structure technology thus represents a novel cost-efficient approach
that does not require the perfect sealing needed in closed-type mirrors. In
addition, the technology enables the application of a dielectric coating.
Full-size prototype mirrors designed for the medium-size CTA telescope will be
presented together with the results of recent optical tests.
[24]
oai:arXiv.org:1307.3137 [pdf] - 1937867
4 m Davies-Cotton telescope for the Cherenkov Telescope Array
Moderski, R.;
Aguilar, J. A.;
Barnacka, A.;
Basili, A.;
Boccone, V.;
Bogacz, L.;
Cadoux, F.;
Christov, A.;
Della Volpe, M.;
Dyrda, M.;
Frankowski, A.;
Grudzińska, M.;
Janiak, M.;
Karczewski, M.;
Kasperek, J.;
Kochański, W.;
Korohoda, P.;
Kozioł, J.;
Lubiński, P.;
Ludwin, J.;
Lyard, E.;
Marszałek, A.;
Michałowski, J.;
Montaruli, T.;
Nicolau-Kukliński, J.;
Niemiec, J.;
Ostrowski, M.;
Płatos, Ł.;
Rajda, P. J.;
Rameez, M.;
Romaszkan, W.;
Rupiński, M.;
Seweryn, K.;
Stodulska, M.;
Stodulski, M.;
Walter, R.;
Winiarski, K.;
Wiśniewski, Ł.;
Zagdański, A.;
Zietara, K.;
Ziółkowski, P.;
Żychowski, P.
Submitted: 2013-07-11
The Cherenkov Telescope Array (CTA) is the next generation very high energy
gamma-ray observatory. It will consist of three classes of telescopes, of
large, medium and small sizes. The small telescopes, of 4 m diameter, will be
dedicated to the observations of the highest energy gamma-rays, above several
TeV. We present the technical characteristics of a single mirror, 4 m diameter,
Davies-Cotton telescope for the CTA and the performance of the sub-array
consisting of the telescopes of this type. The telescope will be equipped with
a fully digital camera based on custom made, hexagonal Geiger-mode avalanche
photodiodes. The development of cameras based on such devices is an RnD since
traditionally photomultipliers are used. The photodiodes are now being
characterized at various institutions of the CTA Consortium. Glass mirrors will
be used, although an alternative is being considered: composite mirrors that
could be adopted if they meet the project requirements. We present a design of
the telescope structure, its components and results of the numerical
simulations of the telescope performance.