We present an extinction map of the inner $\sim$\SI{15}{\arcminute} by {16}{\arcminute} of the Galactic Center (GC) with map `pixels' measuring \SI{5}{\arcsecond} $\times$ \SI{5}{\arcsecond} using integrated light color measurements in the near- and mid-infrared. We use a variant of the Rayleigh-Jeans Color Excess (RJCE) method first described by Majewski et al. (2011) as the basis of our work, although we have approached our problem with a Bayesian mindset and dispensed with point-source photometry in favor of surface photometry, turning the challenge of the extremely crowded field at the GC into an advantage. Our results show that extinction at the GC is not inconsistent with a single power law coefficient, $\beta=2.03\pm0.06$, and compare our results with those using the Red Clump (RC) point-source photometry method of extinction estimation. We find that our measurement of $\beta$ and its apparent lack of spatial variation are in agreement with prior studies, despite the bimodal distribution of values in our extinction map at the GC with peaks at \num{5} and \SI{7.5}{mag}. This bimodal nature of extinction is likely due to the InfraRed Dark Clouds that obscure portions of the inner GC field. We present our extinction law and map and de-reddened NIR CMDs and color-color diagram of the GC region using the point-source catalog of IR sources compiled by DeWitt et al. (2010). The de-reddening is limited by the error in the extinction measurement (typically \SI{0.6}{mag}), which is affected by the size of our map pixels and is not fine-grained enough to separate out the multiple stellar populations present toward the GC.

We present the innovative macro-slicer optical and opto-mechanical designs for the third-generation Mid-resolution InfraReD Astronomical Spectrograph (MIRADAS) instrument for the 10.4m Gran Telescopio Canarias (GTC) in the 1-2.5 $\mu$m bandpass. MIRADAS uses up to 12 cryogenic, fully steerable probes to select simultaneous targets in a 5 arcminute field of view. The spectrograph module is a cross-dispersed echelle spectrograph. The macro-slicer is effectively a stack of six advanced image slicer Integral Field Units (IFUs) such as FRIDA or FISICA, and like other IFUs designed and built at the University of Florida by our group, uses a `bolt-and-go' approach to minimize the difficulty in alignment and maximize robustness. Like other advanced image slicer IFUs, there are three sets of mirrors that work together to geometrically rearrange the loosely packed inputs from the probe arms into a tightly packed pseudo-slit. The macro-slicer also passively keeps the spectral resolution of MIRADAS fixed at $R>20,000$ in seeing from 1.2 arcseconds down to 0.4 arcseconds, (typical observing conditions at GTC).

We present the data reduction pipeline, MEAD, for Arizona Lenslets for Exoplanet Spectroscopy (ALES), the first thermal infrared integral field spectrograph designed for high-contrast imaging. ALES is an upgrade of LMIRCam, the $1-5\,\mu$m imaging camera for the Large Binocular Telescope, capable of observing astronomical objects in the thermal infrared ($3-5\,\mu$m) to produce simultaneous spatial and spectral data cubes. The pipeline is currently designed to perform $L$-band ($2.8-4.2\,\mu$m) data cube reconstruction, relying on methods used extensively by current near-infrared integral field spectrographs. ALES data cube reconstruction on each spectra uses an optimal extraction method. The calibration unit comprises a thermal infrared source, a monochromator and an optical diffuser designed to inject specific wavelengths of light into LBTI to evenly illuminate the pupil plane and ALES lenslet array with monochromatic light. Not only does the calibration unit facilitate wavelength calibration for ALES and LBTI, but it also provides images of monochromatic point spread functions (PSFs). A linear combination of these monochromatic PSFs can be optimized to fit each spectrum in the least-square sense via $\chi^2$ fitting.

The Canarias InfraRed Camera Experiment (CIRCE) is a near-infrared (1-2.5 micron) imager, polarimeter and low-resolution spectrograph operating as a visitor instrument for the Gran Telescopio Canarias 10.4-meter telescope. It was designed and built largely by graduate students and postdocs, with help from the UF astronomy engineering group, and is funded by the University of Florida and the U.S. National Science Foundation. CIRCE is intended to help fill the gap in near-infrared capabilities prior to the arrival of EMIR to the GTC, and will also provide the following scientific capabilities to compliment EMIR after its arrival: high-resolution imaging, narrowband imaging, high-time-resolution photometry, imaging polarimetry, low resolution spectroscopy. In this paper, we review the design, fabrication, integration, lab testing, and on-sky performance results for CIRCE. These include a novel approach to the opto-mechanical design, fabrication, and alignment.