sort results by

Use logical operators AND, OR, NOT and round brackets to construct complex queries. Whitespace-separated words are treated as ANDed.

Show articles per page in mode

Stahle, Caroline K.

Normalized to: Stahle, C.

5 article(s) in total. 43 co-authors, from 1 to 2 common article(s). Median position in authors list is 7,0.

[1]  oai:arXiv.org:1508.06661  [pdf] - 1342817
ATLAST detector needs for direct spectroscopic biosignature characterization in the visible and near-IR
Comments: 8 pages, Presented 9 August 2015 at SPIE Optics + Photonics, San Diego, CA
Submitted: 2015-08-26
Are we alone? Answering this ageless question will be a major focus for astrophysics in coming decades. Our tools will include unprecedentedly large UV-Optical-IR space telescopes working with advanced coronagraphs and starshades. Yet, these facilities will not live up to their full potential without better detectors than we have today. To inform detector development, this paper provides an overview of visible and near-IR (VISIR; $\lambda=0.4-1.8~\mu\textrm{m}$) detector needs for the Advanced Technology Large Aperture Space Telescope (ATLAST), specifically for spectroscopic characterization of atmospheric biosignature gasses. We also provide a brief status update on some promising detector technologies for meeting these needs in the context of a passively cooled ATLAST.
[2]  oai:arXiv.org:astro-ph/0409085  [pdf] - 67166
Multipixel characterization of imaging CZT detectors for hard X-ray imaging and spectroscopy
Comments: To appears in the SPIE 2004 proceedings (5540: Hard X-ray and gamma-ray detector physics V)
Submitted: 2004-09-03
We report our in-depth study of Cd-Zn-Te (CZT) crystals to determine an optimum pixel and guard band configuration for Hard X-ray imaging and spectroscopy. We tested 20x20x5mm crystals with 8x8 pixels on a 2.46mm pitch. We have studied different types of cathode / anode contacts and different pixel pad sizes. We present the measurements of leakage current as well as spectral response for each pixel. Our I-V measurement setup is custom designed to allow automated measurements of the I-V curves sequentially for all 64 pixels, whereas the radiation properties measurement setup allows for interchangeable crystals with the same XAIM3.2 ASIC readout from IDEAS. We have tested multiple crystals of each type, and each crystal in different positions to measure the variation between individual crystals and variation among the ASIC channels. We also compare the same crystals with and without a grounded guard band deposited on the crystal side walls vs. a floating guard band and compare results to simulations. This study was carried out to find the optimum CZT crystal configuration for prototype detectors for the proposed Black-Hole Finder mission, EXIST.
[3]  oai:arXiv.org:astro-ph/0211529  [pdf] - 53264
Background Measurements from Balloon-Borne CZT Detectors
Comments: 9 pages, 7 figures (in 8 files). Presented at SPIE, Aug. 2002. To appear in Proc. SPIE, volume 4851. Errors in references and typos in text fixed
Submitted: 2002-11-24, last modified: 2002-12-03
We report detector characteristics and background measurements from two prototype imaging CZT detectors flown on a scientific balloon payload in May 2001. The detectors are both platinum-contact 10mm x 10mm x 5mm CZT crystals, each with a 4 $\times$ 4 array of pixels tiling the anode. One is made from IMARAD horizontal Bridgman CZT, the other from eV Products high-pressure Bridgman material. Both detectors were mounted side-by-side in a flip-chip configuration and read out by a 32-channel IDE VA/TA ASIC preamp/shaper. We enclosed the detectors in the same 40deg field-of-view collimator (comprisinga graded passive shield and plastic scintillator) used in our previously-reported September 2000 flight. I-V curves for the detectors are diode-like, and we find that the platinum contacts adhere significantly better to the CZT surfaces than gold to previous detectors. The detectors and instrumentation performed well in a 20-hour balloon flight on 23/24 May 2001. Although we discovered a significant instrumental background component in flight, it was possible to measure and subtract this component from the spectra. The resulting IMARAD detector background spectrum (from 30 keV to ~450 keV) reaches ~5 x 10^{-3}$ counts/cm^2 -sec-keV at 100 keV and has a power-law index of ~2 at high energies. The eV Products detector has a similar spectrum, although there is more uncertainty in the energy scale because of calibration complications.
[4]  oai:arXiv.org:astro-ph/0205012  [pdf] - 49086
A High Spectral Resolution Observation of the Soft X-ray Diffuse Background with Thermal Detectors
Comments: To appear in The Astrophysical Journal
Submitted: 2002-05-01
A high spectral resolution observation of the diffuse X-ray background in the 60 - 1000 eV energy range has been made using an array of thirty-six 1 mm^2 micro-calorimeters flown on a sounding rocket. Detector energy resolution ranged from 5-12 eV FWHM, and a composite spectrum of ~ 1 steradian of the background centered at l = 90, b = +60 was obtained with a net resolution of ~ 9 eV. The target area includes bright 1/4 keV regions, but avoids Loop I and the North Polar Spur. Lines of C VI, O VII, and O VIII are clearly detected with intensities of 5.4 +/- 2.3, 4.8 +/- 0.8, and 1.6 +/- 0.4 photons cm^-2 s^-1 sr^-1, respectively. The oxygen lines alone account for a majority of the diffuse background observed in the ROSAT R4 band that is not due to resolved extragalactic discrete sources. We also have a positive detection of the Fe-M line complex near 70 eV at an intensity consistent with previous upper limits that indicate substantial gas phase depletion of iron. We include a detailed description of the instrument and its detectors.
[5]  oai:arXiv.org:astro-ph/0107354  [pdf] - 43725
ASCA Observation of MS 1603.6+2600 (=UW Coronae Borealis): a Dipping Low-Mass X-ray Binary in the Outer Halo?
Comments: 12 pages including 4 figures; ApJ, in press
Submitted: 2001-07-18
MS 1603.6+2600 is a high-latitude X-ray binary with a 111 min orbital period, thought to be either an unusual cataclysmic variable or an unusual low-mass X-ray binary. In an ASCA observation in 1997 August, we find a burst, whose light curve suggests a Type I (thermonuclear flash) origin. We also find an orbital X-ray modulation in MS 1603.6+2600, which is likely to be periodic dips, presumably due to azimuthal structure in the accretion disk. Both are consistent with this system being a normal low-mass X-ray binary harboring a neutron star, but at a great distance. We tentatively suggest that MS 1603.6+2600 is located in the outer halo of the Milky Way, perhaps associated with the globular cluster Palomar 14, 11 degrees away from MS 1603.6+2600 on the sky at an estimated distance of 73.8 kpc.