We report observations of a steady 20 year decline of solar photospheric fields at latitudes $\geq$45${^{o}}$ starting from $\sim$1995. This prolonged and continuing decline, combined with the fact that Cycle 24 is already past its peak, implies that magnetic fields are likely to continue to decline until $\sim$2020, the expected minimum of the ongoing solar Cycle 24. In addition, interplanetary scintillation (IPS) observations of the inner heliosphere for the period 1983--2013 and in the distance range 0.2--0.8 AU, have also shown a similar and steady decline in solar wind micro-turbulence levels, in sync with the declining photospheric fields. Using the correlation between the polar field and heliospheric magnetic field (HMF) at solar minimum, we have estimated the value of the HMF in 2020 to be 3.9 ($\pm$0.6) and a floor value of the HMF of $\sim$3.2 ($\pm$0.4) nT. Given this floor value for the HMF, our analysis suggests that the estimated peak sunspot number for solar Cycle 25 is likely to be $\sim$ 62 ($\pm$12).

In the past, clues on the potential radiogenic activity of the lunar interior have been obtained from the isotopic composition of noble gases like Argon. Excess Argon (40) relative to Argon (36), as compared to the solar wind composition, is generally ascribed to the radiogenic activity of the lunar interior. Almost all the previous estimates were based on, 'on-the-spot' measurements from the landing sites. Relative concentration of the isotopes of 40Ar and 36Ar along a meridian by the Chandra's Altitudinal Composition Explorer (CHACE) experiment, on the Moon Impact Probe (MIP) of India's first mission to Moon, has independently yielded clues on the possible spatial heterogeneity in the radiogenic activity of the lunar interior in addition to providing indicative 'antiquity' of the lunar surface along the ground track over the near side of the moon. These results are shown to broadly corroborate the independent topography measurements by the Lunar Laser Ranging Instrument (LLRI) in the main orbiter Chandrayaan-1. The unique combination of these experiments provided high spatial resolution data while indicating the possible close linkages between the lunar interior and the lunar ambience.

We report on measurements of extremely high reflection rates of solar wind particles from regolith-covered lunar surfaces. Measurements by the Sub-keV Atom Reflecting Analyzer (SARA) instrument on the Indian Chandrayaan-1 spacecraft in orbit around the Moon show that up to 20% of the impinging solar wind protons are reflected from the lunar surface back to space as neutral hydrogen atoms. This finding, generally applicable to regolith-covered atmosphereless bodies, invalidates the widely accepted assumption that regolith almost completely absorbs the impinging solar wind.

The first Indian lunar mission Chandrayaan-1 was launched on 22 October 2008. The Sub-keV Atom Reflecting Analyzer (SARA) instrument onboard Chandrayaan-1 consists of an energetic neutral atom (ENA) imaging mass analyzer called CENA (Chandrayaan-1 Energetic Neutrals Analyzer), and an ion-mass analyzer called SWIM (Solar wind Monitor). CENA performed the first ever experiment to study the solar wind-planetary surface interaction via detection of sputtered neutral atoms and neutralized backscattered solar wind protons in the energy range ~0.01-3.0 keV. SWIM measures solar wind ions, magnetosheath and magnetotail ions, as well as ions scattered from lunar surface in the ~0.01-15 keV energy range. The neutral atom sensor uses conversion of the incoming neutrals to positive ions, which are then analyzed via surface interaction technique. The ion mass analyzer is based on similar principle. This paper presents the SARA instrument and the first results obtained by the SWIM and CENA sensors. SARA observations suggest that about 20% of the incident solar wind protons are backscattered as neutral hydrogen and ~1% as protons from the lunar surface. These findings have important implications for other airless bodies in the solar system.

SARA experiment aboard the first Indian lunar mission Chandrayaan-1 had the objective to explore the solar wind-lunar interaction using energetic neutral atoms (ENA) from the lunar surface as diagnostic tool. SARA consisted of an ENA imaging mass analyzer CENA (Chandrayaan-1 Energetic Neutral Analyzer) and an ion mass analyser SWIM (Solar Wind Monitor), along with a digital processing unit (DPU) which commands and controls the sensors and provides the interface to the spacecraft. Both sensors have provided excellent observational data. CENA has observed ENAs from the lunar surface and found that ~20% of the incident solar wind ions get backscattered as ENAs from the lunar surface. This is contrary to the previous assumptions of almost complete absorption of solar wind by the lunar surface. The observation is relevant for other airless bodies in the solar system.

Significant proton fluxes were detected in the near wake region of the Moon by an ion mass spectrometer on board Chandrayaan-1. The energy of these nightside protons is slightly higher than the energy of the solar wind protons. The protons are detected close to the lunar equatorial plane at a $140^{\circ}$ solar zenith angle, i.e., ~50$^{\circ}$ behind the terminator at a height of 100 km. The protons come from just above the local horizon, and move along the magnetic field in the solar wind reference frame. We compared the observed proton flux with the predictions from analytical models of an electrostatic plasma expansion into a vacuum. The observed velocity was higher than the velocity predicted by analytical models by a factor of 2 to 3. The simple analytical models cannot explain the observed ion dynamics along the magnetic field in the vicinity of the Moon.

The Sub-keV Atom Reflecting Analyzer (SARA) instrument on the Indian Chandrayaan-1 spacecraft has produced for the first time an image of a lunar magnetic anomaly in backscattered hydrogen atoms. The image shows that a partial void of the solar wind, a mini-magnetosphere, is formed above the strong magnetic anomaly near the Crisium antipode. The mini-magnetosphere is 360 km across at the surface and is surrounded by a 300-km-thick region of enhanced plasma flux that results from the solar wind flowing around the mini-magnetosphere. The mini-magnetosphere is visible only in hydrogen atoms with energy exceeding 150 eV. Fluxes with energies below 100 eV do not show corresponding spatial variations. While the high-energy atoms result from the backscattering process, the origin of the low-energy component is puzzling. These observations reveal a new class of objects, mini-magnetospheres, and demonstrate a new observational technique to study airless bodies, imaging in backscattered neutral atoms.

Imaging systems based on a narrow-band tunable filter are used to obtain Doppler velocity maps of solar features. These velocity maps are created by taking the difference between the blue- and red-wing intensity images of a chosen spectral line. This method has the inherent assumption that these two images are obtained under identical conditions. With the dynamical nature of the solar features as well as the Earth's atmosphere, systematic errors can be introduced in such measurements. In this paper, a quantitative estimate of the errors introduced due to variable seeing conditions for ground-based observations is simulated and compared with real observational data for identifying their reliability. It is shown, under such conditions, that there is a strong cross-talk from the total intensity to the velocity estimates. These spurious velocities are larger in magnitude for the umbral regions compared to the penumbra or quiet-sun regions surrounding the sunspots. The variable seeing can induce spurious velocities up to about 1 km/s It is also shown that adaptive optics, in general, helps in minimising this effect.

In a previous paper we described a method of estimating the single-measurement bias to be expected in astrometric observations of targets in crowded fields with the future Space Interferometry Mission (SIM). That study was based on a simplified model of the instrument and the measurement process involving a single-pixel focal plane detector, an idealized spectrometer, and continuous sampling of the fringes during the delay scanning. In this paper we elaborate on this ``instrument model'' to include the following additional complications: spectral dispersion of the light with a thin prism, which turns the instrument camera into an objective prism spectrograph; a multiple-pixel detector in the camera focal plane; and, binning of the fringe signal during scanning of the delay. The results obtained with this improved model differ in small but systematic ways from those obtained with the earlier simplified model. We conclude that it is the pixellation of the dispersed fringes on the focal plane detector which is responsible for the differences. The improved instrument model described here suggests additional ways of reducing certain kinds of confusion, and provides a better basis for the evaluation of instrumental effects in the future.

The accuracy of position measurements on stellar targets with the future Space Interferometry Mission (SIM) will be limited not only by photon noise and by the properties of the instrument (design, stability, etc.) and the overall measurement program (observing strategy, reduction methods, etc.), but also by the presence of other "confusing" stars in the field of view (FOV). We use a simple "phasor" model as an aid to understanding the main effects of this "confusion bias" in single observations with SIM. This analytic model has been implemented numerically in a computer code and applied to a selection of typical SIM target fields drawn from some of the Key Projects already accepted for the Mission. We expect that less than 1% of all SIM targets will be vulnerable to confusion bias; we show that for the present SIM design, confusion may be a concern if the surface density of field stars exceeds 0.4 star/arcsec^2. We have developed a software tool as an aid to ascertaining the possible presence of confusion bias in single observations of any arbitrary field. Some a priori knowledge of the locations and spectral energy distributions of the few brightest stars in the FOV is helpful in establishing the possible presence of confusion bias, but the information is in general not likely to be available with sufficient accuracy to permit its removal. We discuss several ways of reducing the likelihood of confusion bias in crowded fields. Finally, several limitations of the present semi-analytic approach are reviewed, and their effects on the present results are estimated. The simple model presented here provides a good physical understanding of how confusion arises in a single SIM observation, and has sufficient precision to establish the likelihood of a bias in most cases.