Normalized to: Sowiński, M.
[3]
oai:arXiv.org:1509.01824 [pdf] - 1938100
Prototype of the SST-1M Telescope Structure for the Cherenkov Telescope
Array
Niemiec, J.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Borkowski, J.;
Bulik, T .;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Montaruli, T.;
Neronov, A.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Prandini, E.;
Rajda, P.;
Rameez, M.;
Schioppa, E. jr.;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Pujadas, I. Troyano;
Toscano, S.;
Walter, R.;
Wiȩcek, M.;
Zagdański, A.;
Ziȩtara, K.;
Żychowski, P.
Submitted: 2015-09-06
A single-mirror small-size (SST-1M) Davies-Cotton telescope with a dish
diameter of 4 m has been built by a consortium of Polish and Swiss institutions
as a prototype for one of the proposed small-size telescopes for the southern
observatory of the Cherenkov Telescope Array (CTA). The design represents a
very simple, reliable, and cheap solution. The mechanical structure prototype
with its drive system is now being tested at the Institute of Nuclear Physics
PAS in Krakow. Here we present the design of the prototype and results of the
performance tests of the structure and the drive and control system.
[4]
oai:arXiv.org:1509.01368 [pdf] - 1271716
Developments of a new mirror technology for the Cherenkov Telescope
Array
Submitted: 2015-09-04
The Cherenkov Telescope Array (CTA) observatory for very high-energy gamma
rays will consist of about a hundred of imaging atmospheric Cherenkov
telescopes (IACTs) of different size with a total reflective area of about
10,000 m$^2$. Here we present a novel technology for the production of IACT
mirrors that has been developed in the Institute of Nuclear Physics PAS in
Krakow, Poland. The mirrors are made by cold-slumping of the front reflecting
aluminium-coated panel and the rear panel interspaced with aluminium spacers.
Each panel is built of two glass panels laminated with a layer of a fibreglass
tissue in between for reinforcement of the structure against mechanical damage.
The mirror structure is open and does not require a perfect sealing needed in
closed-type designs. It prohibits water to be trapped inside and enables a
proper ventilation of the mirror. Full-size hexagonal prototype mirrors
produced for the medium-sized CTA telescopes will be presented together with
the results of recent comprehensive optical and durability tests. Their design
will be compared to the earlier technology developed at INP PAS that used a
rigid flat open support structure with a reflective layer made by cold-slumping
of the coated glass panel to the cast-in-mould spherical epoxy resin layer.
[5]
oai:arXiv.org:1509.00266 [pdf] - 1938092
Using muon rings for the optical throughput calibration of the SST-1M
prototype for the Cherenkov Telescope Array
Toscano, S.;
Prandini, E.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Rameez, M.;
Rajda, P.;
Schioppa, E. jr.;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Pujadas, I. Troyano;
Walter, R.;
Więcek, M.;
Zagdański, A.;
Ziętara, K.;
Żychowski, P.
Submitted: 2015-09-01
Imaging Atmospheric Cherenkov Telescopes (IACTs) are ground-based instruments
devoted to the study of very high energy gamma-rays coming from space. The
detection technique consists of observing images created by the Cherenkov light
emitted when gamma rays, or more generally cosmic rays, propagate through the
atmosphere. While in the case of protons or gamma-rays the images present a
filled and more or less elongated shape, energetic muons penetrating the
atmosphere are visualised as characteristic circular rings or arcs. A
relatively simple analysis of the ring images allows the reconstruction of all
the relevant parameters of the detected muons, such as the energy, the impact
parameter, and the incoming direction, with the final aim to use them to
calibrate the total optical throughput of the given IACT telescope. We present
the results of preliminary studies on the use of images created by muons as
optical throughput calibrators of the single mirror small size telescope
prototype SST-1M proposed for the Cherenkov Telescope Array.
[6]
oai:arXiv.org:1508.07472 [pdf] - 1941990
Software design for the control system for Small-Size Telescopes with
single-mirror of the Cherenkov Telescope Array
Porcelli, A.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Borkowski, J.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Rameez, M.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Prandini, E.;
Rajda, P.;
Schioppa, E. jr;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Pujadas, I. Troyano;
Toscano, S.;
Walter, R.;
Wiȩcek, M.;
Zagdański, A.;
Ziȩtara, K.;
Zychowski, P.
Submitted: 2015-08-29
The Small-Size Telescope with single-mirror (SST-1M) is a 4 m Davies-Cotton
telescope and is among the proposed telescope designs for the Cherenkov
Telescope Array (CTA). It is conceived to provide the high-energy ($>$ few TeV)
coverage. The SST-1M contains proven technology for the telescope structure and
innovative electronics and photosensors for the camera. Its design is meant to
be simple, low-budget and easy-to-build industrially.
Each device subsystem of an SST-1M telescope is made visible to CTA through a
dedicated industrial standard server. The software is being developed in
collaboration with the CTA Medium-Size Telescopes to ensure compatibility and
uniformity of the array control. Early operations of the SST-1M prototype will
be performed with a subset of the CTA central array control system based on the
Alma Common Software (ACS). The triggered event data are time stamped,
formatted and finally transmitted to the CTA data acquisition.
The software system developed to control the devices of an SST-1M telescope
is described, as well as the interface between the telescope abstraction to the
CTA central control and the data acquisition system.
[7]
oai:arXiv.org:1508.06795 [pdf] - 1938078
Development of the optical system for the SST-1M telescope of the
Cherenkov Telescope Array observatory
Seweryn, K.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Chruślińska, M.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Prandini, E.;
Pueschel, E.;
Rajda, P.;
Rameez, M.;
Rozwadowski, P.;
Schioppa, E. jr;
Schovanek, P.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Toscano, S.;
Pujadas, I. Troyano;
Walter, R.;
Wiȩcek, M.;
Zagdański, A.;
Ziȩtara, K.;
Żychowski, P.;
Barciński, T.;
Karczewski, M.;
Kukliński, J. Nicolau;
Płatos, Ł.;
Rataj, M.;
Wawer, P.;
Wawrzaszek, R.
Submitted: 2015-08-27
The prototype of a Davies-Cotton small size telescope (SST-1M) has been
designed and developed by a consortium of Polish and Swiss institutions and
proposed for the Cherenkov Telescope Array (CTA) observatory. The main purpose
of the optical system is to focus the Cherenkov light emitted by extensive air
showers in the atmosphere onto the focal plane detectors. The main component of
the system is a dish consisting of 18 hexagonal mirrors with a total effective
collection area of 6.47 m2 (including the shadowing and estimated mirror
reflectivity). Such a solution was chosen taking into account the analysis of
the Cherenkov light propagation and based on optical simulations. The proper
curvature and stability of the dish is ensured by the mirror alignment system
and the isostatic interface to the telescope structure. Here we present the
design of the optical subsystem together with the performance measurements of
its components.
[8]
oai:arXiv.org:1508.06459 [pdf] - 1938074
Performance of the SST-1M telescope for the Cherenkov Telescope Array
observatory
Moderski, R.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Chruślińska, M.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Prandini, E.;
Pueschel, E.;
Rajda, P.;
Rameez, M.;
Rozwadowski, P.;
Schioppa, E. jr;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Toscano, S.;
Pujadas, I. Troyano;
Walter, R.;
Wiȩcek, M.;
Zagdański, A.;
Ziȩtara, K.;
Żychowski, P.
Submitted: 2015-08-26
The single mirror small-size telescope (SST-1M) is one of the telescope
projects being proposed for the Cherenkov Telescope Array observatory by a
sub-consortium of Polish and Swiss institutions. The SST-1M prototype structure
is currently being constructed at the Institute of Nuclear Physics in Cracow,
Poland, while the camera will be assembled at the University of Geneva,
Switzerland. This prototype enables measurements of parameters having a
decisive influence on the telescope performance. We present results of
numerical simulations of the SST-1M performance based on such measurements. The
telescope effective area, the expected trigger rates and the optical point
spread function are calculated.
[9]
oai:arXiv.org:1508.06397 [pdf] - 1938071
Camera calibration strategy of the SST-1M prototype of the Cherenokov
Telescope Array
Prandini, E.;
Heller, M.;
Lyard, E.;
Schioppa, E. jr.;
Neronov, A.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Montaruli, T.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Rameez, M.;
Rajda, P.;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Toscano, S.;
Pujadas, I. Troyano;
Walter, R.;
Więcek, M.;
Zagdański, A.;
Ziętara, K.;
Żychowski, P.
Submitted: 2015-08-26
The SST-1M telescope is one of the prototypes under construction proposed to
be part of the future Cherenkov Telescope Array. It uses a standard
Davis-Cotton design for the optics and telescope structure, with a dish
diameter of 4 meters and a large field-of-view of 9 degrees.
The innovative camera design is composed of a photo-detection plane with 1296
pixels including entrance window, light concentrators, Silicon Photomultipliers
(SiPMs), and pre-amplifier stages together with a fully digital readout and
trigger electronics, DigiCam.
In this contribution we give a general description of the analysis chain
designed for the SST-1M prototype. In particular we focus on the calibration
strategy used to convert the SiPM signals registered by DigiCam to the
quantities needed for Cherenkov image analysis. The calibration is based on an
online feedback system to stabilize the gain of the SiPMs, as well as dedicated
events (dark count, pedestal, and light flasher events) to be taken during the
normal operation of the prototype.
[10]
oai:arXiv.org:1508.06082 [pdf] - 1265844
DigiCam - Fully Digital Compact Read-out and Trigger Electronics for the
SST-1M Telescope proposed for the Cherenkov Telescope Array
Rajda, P.;
Ziętara, K.;
Bilnik, W.;
Błocki, J.;
Bogacz, L.;
Bulik, T.;
Cadoux, F.;
Christov, A.;
Curyło, M.;
della Volpe, D.;
Dyrda, M.;
Favre, Y.;
Frankowski, A.;
Grudnik, Ł.;
Grudzińska, M.;
Heller, M.;
Idźkowski, B.;
Jamrozy, M.;
Janiak, M.;
Kasperek, J.;
Lalik, K.;
Lyard, E.;
Mach, E.;
Mandat, D.;
Marszałek, A.;
Michałowski, J.;
Moderski, R.;
Rameez, M.;
Montaruli, T.;
Neronov, A.;
Niemiec, J.;
Ostrowski, M.;
Paśko, P.;
Pech, M.;
Porcelli, A.;
Prandini, E.;
Schioppa, E. jr;
Schovanek, P.;
Seweryn, K.;
Skowron, K.;
Sliusar, V.;
Sowiński, M.;
Stawarz, Ł.;
Stodulska, M.;
Stodulski, M.;
Toscano, S.;
Pujadas, I. Troyano;
Walter, R.;
Więcek, M.;
Zagdański, A.;
Żychowski, P.
Submitted: 2015-08-25
The SST-1M is one of three prototype small-sized telescope designs proposed
for the Cherenkov Telescope Array, and is built by a consortium of Polish and
Swiss institutions. The SST-1M will operate with DigiCam - an innovative,
compact camera with fully digital read-out and trigger electronics. A high
level of integration will be achieved by massively deploying state-of-the-art
multi-gigabit transmission channels, beginning from the ADC flash converters,
through the internal data and trigger signals transmission over backplanes and
cables, to the camera's server link. Such an approach makes it possible to
design the camera to fit the size and weight requirements of the SST-1M
exactly, and provide low power consumption, high reliability and long lifetime.
The structure of the digital electronics will be presented, along with main
physical building blocks and the internal architecture of FPGA functional
subsystems.