We present SQUEzE, a software package to classify quasar spectra and estimate their redshifts. SQUEzE is a random forest classifier operating on the parameters of candidate emission peaks identified in the spectra. We test the performance of the algorithm using visually inspected data from BOSS as a truth table. Only 4\% of the sample ($\sim$6,800 quasars and $\sim$11,520 contaminants) is needed for converged training in recommended choices of the confidence threshold ($0.2<p_{\rm min}<0.7$). For an operational mode which balances purity and completeness ($p_{\rm min}=0.28$) we recover a purity of $96.81\pm0.39\%$ ($99.30\pm0.14\%$ for quasars with $z \geq 2.1$) and a completeness of $96.83\pm0.30\%$ ($98.42\pm0.15\%$ for quasars with $z \geq 2.1$). SQUEzE can be used to obtain a $\approx$100\% pure sample of $z \geq 2.1$. quasars (with $\approx$96\% completeness) by using a confidence threshold of $p_{\rm min}=0.7$. The estimated redshift error is $1,500{\rm \thinspace km/s}$ and we recommend that SQUEzE be used in conjunction with an additional step of redshift tuning to achieve maximum precision. We find that SQUEzE achieves the necessary performance to replace visual inspection in BOSS-like spectroscopic surveys of quasars with subsequent publications in this series exploring expectations for future surveys and alternative methods. Keywords: cosmology: observations - quasar: emission lines - quasar: absorption lines

Absorption spectroscopy of gravitationally lensed quasars (GLQs) enables study of spatial variations in the interstellar and/or circumgalactic medium of foreground galaxies. We report observations of 4 GLQs, each with two images separated by 0.8-3.0", that show strong absorbers at redshifts 0.4$<$$z_{abs}$$<$1.3 in their spectra, including some at the lens redshift with impact parameters 1.5-6.9 kpc. We measure H I Lyman lines along two sight lines each in five absorbers (10 sight lines in total) using HST STIS, and metal lines using Magellan Echellette or Sloan Digital Sky Survey. Our data have doubled the lens galaxy sample with measurements of H I column densities ($N_{\rm H I}$) and metal abundances along multiple sight lines. Our data, combined with the literature, show no strong correlation between absolute values of differences in $N_{\rm H I}$, $N_{\rm Fe II}$, or [Fe/H] and the sight line separations at the absorber redshifts for separations of 0-8 kpc. The estimated abundance gradients show a tentative anti-correlation with abundances at galaxy centers. Some lens galaxies show inverted gradients, possibly suggesting central dilution by mergers or infall of metal-poor gas. [Fe/H] measurements and masses estimated from GLQ astrometry suggest the lens galaxies lie below the total mass-metallicity relation for early-type galaxies as well as measurements for quasar-galaxy pairs and gravitationally lensed galaxies at comparable redshifts. This difference may arise in part from the dust depletion of Fe. Higher resolution measurements of H and metals (especially undepleted elements) for more GLQ absorbers and accurate lens redshifts are needed to confirm these trends.

High signal-to-noise spectra toward background quasars are crucial for uncovering weak absorption in the circumgalactic medium (CGM) of intervening galaxies, such as the diagnostic lines of N V that provide insight to the ionization process of warm gas but typically have low equivalent widths. We present a new spectrum from the Hubble Space Telescope with a signal-to-noise ratio of $\sim20-35$ toward the quasar SDSS J1009+0713 and analyze absorption systems in the CGM of two $L^\star$ galaxies close to the line of sight. We identify additional absorption in the CGM of these galaxies that was not reported by the previous lower signal-to-noise spectrum, as well as Milky Way absorbers and quasar outflows from J1009+0713. We measure $\log (N_\mathrm{NV}/N_\mathrm{OVI})\sim-1.1$ for two CGM absorbers, inconsistent with gas in collisional ionization equilibrium and consistent with a radiatively cooling bulk flow of $\sim50-150$ km s$^{-1}$, which could be produced by galactic winds. These column density ratios are also consistent with those found for other $L^\star$ galaxies and for some gas in the Milky Way's halo. We place upper limits of $\log (N_\mathrm{NV}/N_\mathrm{OVI})<-1.8$ to $-1.2$ for other O VI absorbers in the same halos, which suggests that O VI is produced by different processes in different parts of the CGM, even within the same galactic halo. Together with the kinematically different structure of high- and low-ionization lines, these results indicate there are many components to a single galaxy's gaseous halo. We find the redshift number density of Ly-$\alpha$ forest absorbers and broad Ly-$\alpha$ absorbers are consistent with expectations at this redshift.

We present abundance measurements of elements O, C, Si and Fe for three gas-rich galaxies at z~5 using observations from the Very Large Telescope (VLT) and the Keck telescope in order to better constrain the early chemical enrichment of gas-rich galaxies. These galaxies show strong Lyman-{\alpha} absorption in the spectra of background quasars, with neutral hydrogen column densities log N${_H{}_I}$(cm$^{-2}$)=20.10$\pm$0.15, 20.10$\pm$0.15, and 20.80$\pm$0.15. Using the undepleted element O, we find the metallicities [O/H] to be in the range of -2.51 to -2.05 dex. Our study has doubled the existing sample of measurements of undepleted elements at z>4.5. Combining our measurements with those from the literature, we find that the N${_H{}_I}$-weighted mean metallicity of z~5 absorbers is consistent with the prediction based on z<4.5 DLAs. Thus, we find no significant evidence of a sudden drop in metallicity at z>4.7 as reported by some prior studies. We also determine the extent of dust depletion using a combination of both the volatile element O and the refractory elements Si and/or Fe. Some of the absorbers show evidence of depletion of elements on dust grains, e.g. low [Si/O] or [Fe/O]. The relative abundances of these absorbers along with other z~5 absorbers from the literature show some peculiarities, e.g. low [C/O] in several absorbers and high [Si/O] in one absorber. Finally, we find that the metallicity vs. velocity dispersion relation of z~5 absorbers may be different from that of lower-redshift absorbers.

DESI (Dark Energy Spectroscopic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations (BAO) and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. To trace the underlying dark matter distribution, spectroscopic targets will be selected in four classes from imaging data. We will measure luminous red galaxies up to $z=1.0$. To probe the Universe out to even higher redshift, DESI will target bright [O II] emission line galaxies up to $z=1.7$. Quasars will be targeted both as direct tracers of the underlying dark matter distribution and, at higher redshifts ($ 2.1 < z < 3.5$), for the Ly-$\alpha$ forest absorption features in their spectra, which will be used to trace the distribution of neutral hydrogen. When moonlight prevents efficient observations of the faint targets of the baseline survey, DESI will conduct a magnitude-limited Bright Galaxy Survey comprising approximately 10 million galaxies with a median $z\approx 0.2$. In total, more than 30 million galaxy and quasar redshifts will be obtained to measure the BAO feature and determine the matter power spectrum, including redshift space distortions.

DESI (Dark Energy Spectropic Instrument) is a Stage IV ground-based dark energy experiment that will study baryon acoustic oscillations and the growth of structure through redshift-space distortions with a wide-area galaxy and quasar redshift survey. The DESI instrument is a robotically-actuated, fiber-fed spectrograph capable of taking up to 5,000 simultaneous spectra over a wavelength range from 360 nm to 980 nm. The fibers feed ten three-arm spectrographs with resolution $R= \lambda/\Delta\lambda$ between 2000 and 5500, depending on wavelength. The DESI instrument will be used to conduct a five-year survey designed to cover 14,000 deg$^2$. This powerful instrument will be installed at prime focus on the 4-m Mayall telescope in Kitt Peak, Arizona, along with a new optical corrector, which will provide a three-degree diameter field of view. The DESI collaboration will also deliver a spectroscopic pipeline and data management system to reduce and archive all data for eventual public use.

Element abundances in high-redshift quasar absorbers offer excellent probes of the chemical enrichment of distant galaxies, and can constrain models for population III and early population II stars. Recent observations indicate that the sub-damped Lyman-alpha (sub-DLA) absorbers are more metal-rich than DLA absorbers at redshifts 0$<$$z$$<$3. It has also been suggested that the DLA metallicity drops suddenly at $z$$>$4.7. However, only 3 DLAs at $z$$>$4.5 and none at $z$$>$3.5 have "dust-free" metallicity measurements of undepleted elements. We report the first quasar sub-DLA metallicity measurement at $z$$>$3.5, from detections of undepleted elements in high-resolution data for a sub-DLA at $z$=5.0. We obtain fairly robust abundances of C, O, Si, and Fe, using lines outside the Lyman-alpha forest. This absorber is metal-poor, with O/H]=-2.00$\pm$0.12, which is $\gtrsim$4$\sigma$ below the level expected from extrapolation of the trend for $z$$<$3.5 sub-DLAs. The C/O ratio is 1.8$^{+0.4}_{-0.3}$ times lower than in the Sun. More strikingly, Si/O is 3.2$^{+0.6}_{-0.5}$ times lower than in the Sun, while Si/Fe is nearly (1.2$^{+0.4}_{-0.3}$ times) solar. This absorber does not display a clear alpha/Fe enhancement. Dust depletion may have removed more Si from the gas phase than is common in the Milky Way interstellar medium, which may be expected if high-redshift supernovae form more silicate-rich dust. C/O and Si/O vary substantially between different velocity components, indicating spatial variations in dust depletion and/or early stellar nucleosynethesis (e.g., population III star initial mass function). The higher velocity gas may trace an outflow enriched by early stars.

This article is based on an invited talk given by V. P. Kulkarni at the 8th Cosmic Dust meeting. Dust has a profound effect on the physics and chemistry of the interstellar gas in galaxies and on the appearance of galaxies. Understanding the cosmic evolution of dust with time is therefore crucial for understanding the evolution of galaxies. Despite the importance of interstellar dust, very little is known about its nature and composition in distant galaxies. We summarize the results of our ongoing programs using observations of distant quasars to obtain better constraints on dust grains in foreground galaxies that happen to lie along the quasar sightlines. These observations consist of a combination of mid-infrared data obtained with the Spitzer Space Telescope and optical/UV data obtained with ground-based telescopes and/or the Hubble Space Telescope. The mid-IR data target the 10 $\mu$m and 18 $\mu$m silicate absorption features, while the optical/UV data allow determinations of element depletions, extinction curves, 2175 {\AA} bumps, etc. Measurements of such properties in absorption-selected galaxies with redshifts ranging from $z\sim0$ to $z>2$ provide constraints on the evolution of interstellar dust over the past $> 10$ Gyr. The optical depth of the 10 $\mu$m silicate absorption feature ($\tau_{10}$) in these galaxies is correlated with the amount of reddening along the sightline. But there are indications [e.g., based on the $\tau_{10}$ /$E(B-V)$ ratio and possible grain crystallinity] that the dust in these distant galaxies differs in structure and composition from the dust in the Milky Way and the Magellanic Clouds. We briefly discuss the implications of these results for the evolution of galaxies and their star formation history.

We report Keck/ESI and VLT/UVES observations of three super-damped Lyman-alpha quasar absorbers with H I column densities log N(HI) >= 21.7 at redshifts z=2-2.5. All three absorbers show similar metallicities (-1.3 to -1.5 dex), and dust depletion of Fe, Ni, and Mn. Two of the absorbers show supersolar [S/Zn] and [Si/Zn]. We combine our results with those for other DLAs to examine trends between N(HI), metallicity, dust depletion. A larger fraction of the super-DLAs lie close to or above the line [X/H]=20.59-log N(HI) in the metallicity vs. N(HI) plot, compared to the less gas-rich DLAs, suggesting that super-DLAs are more likely to be rich in molecules. Unfortunately, our data for Q0230-0334 and Q0743+1421 do not cover H2 absorption lines. For Q1418+0718, some H2 lines are covered, but not detected. CO is not detected in any of our absorbers. For DLAs with log N(HI) < 21.7, we confirm strong correlation between metallicity and Fe depletion, and find a correlation between metallicity and Si depletion. For super-DLAs, these correlations are weaker or absent. The absorbers toward Q0230-0334 and Q1418+0718 show potential detections of weak Ly-alpha emission, implying star formation rates of about 1.6 and 0.7 solar masses per year, respectively (ignoring dust extinction). Upper limits on the electron densities from C II*/C II or Si II*/Si II are low, but are higher than the median values in less gas-rich DLAs. Finally, systems with log N(HI) > 21.7 may have somewhat narrower velocity dispersions delta v_90 than the less gas-rich DLAs, and may arise in cooler and/or less turbulent gas.

We report observations of four sub-damped Lyman-alpha (sub-DLA) quasar absorbers at z<0.5 obtained with the Hubble Space Telescope Cosmic Origins Spectrograph. We measure the available neutrals or ions of C, N, O, Si, P, S, Ar, Mn, Fe, and/or Ni. Our data have doubled the sub-DLA metallicity samples at z<0.5 and improved constraints on sub-DLA chemical evolution. All four of our sub-DLAs are consistent with near-solar or super-solar metallicities and relatively modest ionization corrections; observations of more lines and detailed modeling will help to verify this. Combining our data with measurements from the literature, we confirm previous suggestions that the N(HI)-weighted mean metallicity of sub-DLAs exceeds that of DLAs at all redshifts studied, even after making ionization corrections for sub-DLAs. The absorber toward PHL 1598 shows significant dust depletion. The absorbers toward PHL 1226 and PKS 0439-433 show the S/P ratio consistent with solar, i.e., they lack a profound odd-even effect. The absorber toward Q0439-433 shows super-solar Mn/Fe. For several sub-DLAs at z<0.5, [N/S] is below the level expected for secondary N production, suggesting a delay in the release of the secondary N or a tertiary N production mechanism. We constrain the electron density using Si II* and C II* absorption. We also report different metallicity vs. Delta V_90 relations for sub-DLAs and DLAs. For two sub-DLAs with detections of emission lines from the underlying galaxies, our measurements of the absorption-line metallicities are consistent with the emission-line metallicities, suggesting that metallicity gradients are not significant in these galaxies.

Damped Lyman-alpha (DLA) and sub-DLA absorbers in quasar spectra provide the most sensitive tools for measuring element abundances of distant galaxies. Estimation of abundances from absorption lines depends sensitively on the accuracy of the atomic data used. We have started a project to produce new atomic spectroscopic parameters for optical/UV spectral lines using state-of-the-art computer codes employing very broad configuration interaction basis. Here we report our results for Zn II, an ion used widely in studies of the interstellar medium (ISM) as well as DLA/sub-DLAs. We report new calculations of many energy levels of Zn II, and the line strengths of the resulting radiative transitions. Our calculations use the configuration interaction approach within a numerical Hartree-Fock framework. We use both non-relativistic and quasi-relativistic one-electron radial orbitals. We have incorporated the results of these atomic calculations into the plasma simulation code Cloudy, and applied them to a lab plasma and examples of a DLA and a sub-DLA. Our values of the Zn II {\lambda}{\lambda} 2026, 2062 oscillator strengths are higher than previous values by 0.10 dex. Cloudy calculations for representative absorbers with the revised Zn atomic data imply ionization corrections lower than calculated before by 0.05 dex. The new results imply Zn metallicities should be lower by 0.1 dex for DLAs and by 0.13-0.15 dex for sub-DLAs than in past studies. Our results can be applied to other studies of Zn II in the Galactic and extragalactic ISM.

Absorption lines in the spectra of distant quasars whose sightlines pass through foreground galaxies provide a valuable tool to probe the dust and gas compositions of the interstellar medium (ISM) in galaxies. The first evidence of silicate dust in a quasar absorption system (QAS) was provided through our detection of the 10 micron silicate feature in the z=0.52 absorber toward the quasar AO 0235+164. We present results from 2 follow-up programs using archival Spitzer Space Telescope infrared spectra to study the interstellar silicate dust grain properties in a total of 13 QASs at 0.1<z<1.4. We find clear detections of the 10 micron silicate feature in the QASs studied. We also detect the 18 micron silicate feature in the sources with adequate spectral coverage. We find variations in the breadth, peak wavelength, and substructure of the 10 micron interstellar silicate absorption features among the absorbers. This suggests that the silicate dust grain properties in these distant galaxies may differ relative to one another, and relative to those in the Milky Way. We also find suggestions in several sources, based on comparisons with laboratory-derived profiles from the literature, that the silicate dust grains may be significantly more crystalline than those in the amorphous Milky Way ISM. This is particularly evident in the z=0.89 absorber toward the quasar PKS 1830-211, where substructure near 10 micron is consistent with a crystalline olivine composition. If confirmed, these grain property variations may have implications for both dust and galaxy evolution over the past 9 Gyrs, and for the commonly-made assumption that high-redshift dust is similar to local dust. We also discuss indications of trends between silicate dust absorption strength and both carbonaceous dust properties and gas-phase metal properties, such as the gas velocity spread, determined from UV/optical spectra.

We present chemical abundance measurements from high-resolution observations of 5 sub-damped Lyman-alpha absorbers at 1.7 < z < 2.4 observed with the Magellan Inamori Kyocera Echelle (MIKE) spectrograph on the 6.5-m Magellan II Clay telescope. Lines of Zn II, Mg I, Mg II, Al II, Al III, S II, Si II, Si IV, C II, C II*, C IV, Ni II, Mn II and Fe II were detected and column densities were determined. The metallicity of the absorbing gas, inferred from the nearly undepleted element Zn, is in the range of < -0.95 to +0.25 dex for the five absorbers in our sample, with three of the systems being near-solar or super-solar. We also investigate the effect of ionisation on the observed abundances using photoionisation modelling. Combining our data with other sub-DLA and DLA data from the literature, we report the most complete existing determination of the metallicity vs. redshift relation for sub-DLAs and DLAs. We confirm the suggestion from previous investigations that sub-DLAs are, on average, more metal-rich than DLAs and evolve faster. We also discuss relative abundances and abundance ratios in these absorbers. The more metal-rich systems show significant dust depletion levels, as suggested by the ratios [Zn/Cr] and [Zn/Fe]. For the majority of the systems in our sample, the [Mn/Fe] vs. [Zn/H] trend is consistent with that seen previously for lower-redshift sub-DLAs. We also measure the velocity width values for the sub-DLAs in our sample from unsaturated absorption lines of Fe II 2344, 2374, 2600 A, and examine where these systems lie in a plot of metallicity vs. velocity dispersion. Finally, we examine cooling rate vs. H I column density in these sub-DLAs, and compare this with the data from DLAs and the Milky Way ISM. We find that most of the systems in our sample show higher cooling rate values compared to those seen in the DLAs.

We report the discovery of a "super-damped" Lyman-alpha absorber at $z_{abs}=2.2068$ toward QSO Q1135-0010 in the Sloan Digital Sky Survey, and follow-up VLT UVES spectroscopy. Voigt profile fit to the DLA line indicates log $N_{\rm H I} = 22.05 \pm 0.1$. This is the second QSO DLA discovered to date with such high $N_{\rm H I}$. We derive element abundances [Si/H] = $-1.10 \pm 0.10$, [Zn/H] = $-1.06 \pm 0.10$, [Cr/H] = $-1.55 \pm 0.10$, [Ni/H] = $-1.60 \pm 0.10$, [Fe/H] = $-1.76 \pm 0.10$, [Ti/H] = $-1.69 \pm 0.11$, [P/H] = $-0.93 \pm 0.23$, and [Cu/H] = $-0.75 \pm 0.14$. Our data indicate detection of Ly-$\alpha$ emission in the DLA trough, implying a star formation rate of $\sim$10 $M_{\odot}$ yr$^{-1}$ in the absence of dust attenuation. C II$^{*} \, \lambda 1336$ absorption is also detected, suggesting SFR surface density $-2 < {\rm log} \, \dot{\psi_{*}} < 0$ $M_{\odot}$ yr$^{-1}$ kpc$^{-2}$. We estimate electron density in the range $3.5 \times 10^{-4}$ to 24.7 cm$^{-3}$ from C II$^{*}$/C II, and $\sim$0.5-0.9 cm$^{-3}$ from Si II$^{*}$/Si II. Overall, this is a robustly star-forming, moderately enriched absorber, but with relatively low dust depletion. Fitting of the SDSS spectrum yields low reddening for Milky Way, LMC, or SMC extinction curves. No CO absorption is detected, and C I absorption is weak. The low dust and molecular content, reminiscent of some SMC sight-lines, may result from the lower metallicity, and a stronger radiation field (due to higher SFR). Finally, we compare this absorber with other QSO and GRB DLAs.

We present evidence of a >10-sigma detection of the 10 micron silicate dust absorption feature in the spectrum of the gravitationally lensed quasar PKS 1830-211, produced by a foreground absorption system at redshift 0.886. We have examined more than 100 optical depth templates, derived from both observations of Galactic and extragalactic sources and laboratory measurements, in order to constrain the chemical structure of the silicate dust. We find that the best fit to the observed absorption profile is produced by laboratory crystalline olivine, with a corresponding peak optical depth of tau_10=0.27+/-0.05. The fit is slightly improved upon by including small contributions from additional materials such as silica, enstatite, or serpentine, which suggests that the dust composition may consist of a blend of crystalline silicates. Combining templates for amorphous and crystalline silicates, we find that the fraction of crystalline silicates needs to be at least 95%. Given the rarity of extragalactic sources with such a high degree of silicate crystallinity, we also explore the possibility that the observed spectral features are produced by amorphous silicates in combination with other molecular or atomic transitions, or by foreground source contamination. While we cannot rule out these latter possibilities, they lead to much poorer profile fits than for the crystalline olivine templates. If the presence of crystalline interstellar silicates in this distant galaxy is real, it would be highly unusual, given that the Milky Way interstellar matter contains essentially only amorphous silicates. It is possible that the z=0.886 absorber towards PKS 1830-211, well known for its high molecular content, has a unique star-forming environment that enables crystalline silicates to form and prevail.

We consider the questions of whether the damped Lyman-alpha (DLA) and sub-DLA absorbers in quasar spectra differ intrinsically in metallicity, and whether they could arise in galaxies of different masses. Using the recent measurements of the robust metallicity indicators Zn and S in DLAs and sub-DLAs, we confirm that sub-DLAs have higher mean metallicities than DLAs, especially at $z \lesssim 2$. We find that the intercept of the metallicity-redshift relation derived from Zn and S is higher than that derived from Fe by 0.5-0.6 dex. We also show that, while there is a correlation between the metallicity and the rest equivalent width of Mg II $\lambda 2796$ or Fe II $\lambda 2599$ for DLAs, no correlation is seen for sub-DLAs. Given this, and the similar Mg II or Fe II selection criteria employed in the discovery of both types of systems at lower redshifts, the difference between metallicities of DLAs and sub-DLAs appears to be real and not an artefact of selection. This conclusion is supported by our simulations of Mg II $\lambda 2796$ and Fe II $\lambda 2599$ lines for a wide range of physical conditions. On examining the velocity spreads of the absorbers, we find that sub-DLAs show somewhat higher mean and median velocity spreads ($\Delta v$), and an excess of systems with $\Delta v > 150$ km s$^{-1}$, than DLAs. Compared to DLAs, the [Mn/Fe] vs. [Zn/H] trend for sub-DLAs appears to be steeper and closer to the trend for Galactic bulge and thick disk stars, possibly suggesting different stellar populations. The absorber data appear to be consistent with galaxy down-sizing. The data are also consistent with the relative number densities of low-mass and high-mass galaxies. It is thus plausible that sub-DLAs arise in more massive galaxies on average than DLAs.

Quasi-Periodic Oscillations (QPOs) are very puzzling since they remain totally unexplained by popular earlier models of accretion disks. The significant rms value in power density spectrum implies that the oscillation involves in the dynamical and non-linear variation of certain region of the accretion disk itself. The nature of the energy dependence implies that the region which produces Comptonized hard tail is also responsible for QPOs. Similarly, the occurrences of the QPOs are strongly related to the jet formation and the spectral states. These features are the natural consequences of the advective disk paradigm that we are advocating. In the mid 90s, some of the present authors first pointed out that the QPOs in all possible types of black holes may be simply due to the oscillations of the CENBOL, the CENtrifugal pressure supported BOundary Layer which is formed in the sub-Keplerian flows around a black hole. This CENBOL could be axi-symmetric as well as non-axisymteric in nature since its boundary, namely, the centrifugally driven shocks could be axi-symmetric or non-axisymmetric. In addition, we pointed out that the transition radius where the flow becomes Keplerian to sub-Keplerian, as well as the location of the inner sonic point can also oscillate and produce the QPOs. Since the shock locations are functions of the specific angular momentum ($\lambda$) and specific energy (${\cal E}$) of the flow, our model naturally predicts that the QPO frequency should vary with mass, spin, $\lambda$ and ${\cal E}$. The QPO frequencies with specific ratios, such as, 2:3 must be due to non-axisymmetric effects when the shock switches between the two-armed and the three-armed spirals. We also discuss the possible effects that the disk inclination might have with the line of sight.