Data from transit light curves, radial velocity and transit timing observations can be used to probe the interiors of exoplanets beyond the mean density, by measuring the Love numbers $h_2$ and $k_2$. The first indirect estimate of $k_2$ for an exoplanet from radial velocity and transit timing variations observations has been performed by taking advantage of the years-spanning baseline. Not a single measurement of $h_2$ has been achieved from transit light curves, mostly because the photometric precision of current observing facilities is still too low. We show that the Imaging Spectrograph instrument on-board the Hubble Space Telescope could measure $h_2$ of the hot Jupiter WASP-121b if only few more observations were gathered. We show that a careful treatment of the noise and stellar limb darkening must be carried out to achieve a measurement of $h_2$. In particular, we find that the impact of the noise modelling on the estimation of $h_2$ is stronger than the impact of the limb darkening modelling. In addition, we emphasize that the wavelet method for correlated noise analysis can mask limb brightening. Finally, using presently available data, we briefly discuss the tentative measurement of $h_2 = 1.39^{+0.71}_{-0.81}$ in terms of interior structure. Additional observations would further constrain the interior of WASP-121b and possibly provide insights on the physics of inflation. The possibility of using the approach presented here with the Hubble Space Telescope provides a bridge before the high-quality data to be returned by the James Webb Space Telescope and PLATO telescope in the coming decade.

We are witness to a great and increasing interest in internal structure, composition and evolution of exoplanets. However, direct measurements of exoplanetary mass and radius cannot be uniquely interpreted in terms of interior structure, justifying the need for an additional observable. The second degree fluid Love number, $k_2$, is proportional to the concentration of mass towards the body's center, hence providing valuable additional information about the internal structure. When hydrostatic equilibrium is assumed for the planetary interior, $k_2$ is a direct function of the planetary shape. Previous attempts were made to link the observed tidally and rotationally induced planetary oblateness in photometric light curves to $k_2$ using ellipsoidal shape models. Here, we construct an analytical 3D shape model function of the true planetary mean radius, that properly accounts for tidal and rotational deformations. Measuring the true planetary mean radius is critical when one wishes to compare the measured $k_2$ to interior theoretical expectations. We illustrate the feasibility of our method and show, by applying a Differential Evolution Markov Chain to synthetic data of WASP-121b, that a precision $\leq$ 65 ppm/$\sqrt{2\,min}$ is required to reliably retrieve $k_2$ with present understanding of stellar limb darkening, therefore improving recent results based on ellipsoidal shape models. Any improvement on stellar limb darkening would increase such performance.

Context. The mass and radius of a planet directly provide its bulk density, which can be interpreted in terms of its overall composition. Any measure of the radial mass distribution provides a first step in constraining the interior structure. The fluid Love number $k_2$ provides such a measure, and estimates of $k_2$ for extrasolar planets are expected to be available in the coming years thanks to improved observational facilities and the ever-extending temporal baseline of extrasolar planet observations. Aims. We derive a method for calculating the Love numbers $k_n$ of any object given its density profile, which is routinely calculated from interior structure codes. Methods. We used the matrix-propagator technique, a method frequently used in the geophysical community. Results. We detail the calculation and apply it to the case of GJ 436b, a classical example of the degeneracy of mass-radius relationships, to illustrate how measurements of $k_2$ can improve our understanding of the interior structure of extrasolar planets. We implemented the method in a code that is fast, freely available, and easy to combine with preexisting interior structure codes. While the linear approach presented here for the calculation of the Love numbers cannot treat the presence of nonlinear effects that may arise under certain dynamical conditions, it is applicable to close-in gaseous extrasolar planets like hot Jupiters, likely the first targets for which $k_2$ will be measured.

PLATO 2.0 has recently been selected for ESA's M3 launch opportunity (2022/24). Providing accurate key planet parameters (radius, mass, density and age) in statistical numbers, it addresses fundamental questions such as: How do planetary systems form and evolve? Are there other systems with planets like ours, including potentially habitable planets? The PLATO 2.0 instrument consists of 34 small aperture telescopes (32 with 25 sec readout cadence and 2 with 2.5 sec candence) providing a wide field-of-view (2232 deg2) and a large photometric magnitude range (4-16 mag). It focusses on bright (4-11 mag) stars in wide fields to detect and characterize planets down to Earth-size by photometric transits, whose masses can then be determined by ground-based radial-velocity follow-up measurements. Asteroseismology will be performed for these bright stars to obtain highly accurate stellar parameters, including masses and ages. The combination of bright targets and asteroseismology results in high accuracy for the bulk planet parameters: 2%, 4-10% and 10% for planet radii, masses and ages, respectively. The planned baseline observing strategy includes two long pointings (2-3 years) to detect and bulk characterize planets reaching into the habitable zone (HZ) of solar-like stars and an additional step-and-stare phase to cover in total about 50% of the sky. PLATO 2.0 will observe up to 1,000,000 stars and detect and characterize hundreds of small planets, and thousands of planets in the Neptune to gas giant regime out to the HZ. It will therefore provide the first large-scale catalogue of bulk characterized planets with accurate radii, masses, mean densities and ages. This catalogue will include terrestrial planets at intermediate orbital distances, where surface temperatures are moderate. Coverage of this parameter range with statistical numbers of bulk characterized planets is unique to PLATO 2.0.

Mass and radius of planets transiting their host stars are provided by radial velocity and photometric observations. Structural models of solid exoplanet interiors are then constructed by using equations of state for the radial density distribution, which are compliant with the thermodynamics of the high-pressure limit. However, to some extent those structural models suffer from inherent degeneracy or non-uniqueness problems owing to a principal lack of knowledge of the internal differentiation state and/or the possible presence of an optically thick atmosphere. We here discuss the role of corresponding measurement errors, which adversely affect determinations of a planet's mean density and bulk chemical composition. Precise measurements of planet radii will become increasingly important as key observational constraints for radial density models of individual solid low-mass exoplanets or super-Earths.

The present OSS mission continues a long and bright tradition by associating the communities of fundamental physics and planetary sciences in a single mission with ambitious goals in both domains. OSS is an M-class mission to explore the Neptune system almost half a century after flyby of the Voyager 2 spacecraft. Several discoveries were made by Voyager 2, including the Great Dark Spot (which has now disappeared) and Triton's geysers. Voyager 2 revealed the dynamics of Neptune's atmosphere and found four rings and evidence of ring arcs above Neptune. Benefiting from a greatly improved instrumentation, it will result in a striking advance in the study of the farthest planet of the Solar System. Furthermore, OSS will provide a unique opportunity to visit a selected Kuiper Belt object subsequent to the passage of the Neptunian system. It will consolidate the hypothesis of the origin of Triton as a KBO captured by Neptune, and improve our knowledge on the formation of the Solar system. The probe will embark instruments allowing precise tracking of the probe during cruise. It allows to perform the best controlled experiment for testing, in deep space, the General Relativity, on which is based all the models of Solar system formation. OSS is proposed as an international cooperation between ESA and NASA, giving the capability for ESA to launch an M-class mission towards the farthest planet of the Solar system, and to a Kuiper Belt object. The proposed mission profile would allow to deliver a 500 kg class spacecraft. The design of the probe is mainly constrained by the deep space gravity test in order to minimise the perturbation of the accelerometer measurement.

Odyssey 2 will be proposed in December 2010 for the next call of M3 missions for Cosmic Vision 2015-2025. This mission, under a Phase 0 study performed by CNES, will aim at Neptune and Triton. Two sets of objectives will be pursued. The first one is to perform a set of gravitation experiments at the Solar System scale. Experimental tests of gravitation have always shown good agreement with General Relativity. There are however drivers to continue testing General Relativity, and to do so at the largest possible scales. From a theoretical point of view, Einstein's theory of gravitation shows inconsistencies with a quantum description of Nature and unified theories predict deviations from General Relativity. From an observational point of view, as long as dark matter and dark energy are not observed through other means than their gravitational effects, they can be considered as a manifestation of a modification of General Relativity at cosmic scales. The scientific objectives are to: (i) test the gravitation law at the Solar System scale; (ii) measure the Eddington parameter; and (iii) investigate the navigation anomalies during fly-bys. To fulfil these objectives, the following components are to be on board the spacecraft: (i) the Gravity Advanced Package (GAP), which is an electrostatic accelerometer to which a rotating stage is added; (ii) radio-science; (iii) laser ranging, to improve significantly the measure of the Eddington parameter. The second set of objectives is to enhance our knowledge of Neptune and Triton. Several instruments dedicated to planetology are foreseen: camera, spectrometer, dust and particle detectors, and magnetometer. Depending on the ones kept, the mission could provide information on the gravity field, the atmosphere and the magnetosphere of the two bodies as well as on the surface geology of Triton and on the nature of the planetary rings around Neptune.

The present study takes the CoRoT-7b exoplanet as an analogue for massive terrestrial planets to investigate conditions, under which intrinsic magnetic fields could be sustained in liquid cores. We examine the effect of depth-dependent transport parameters (e.g., activation volume of mantle rock) on a planet's thermal structure and the related heat flux across the core mantle boundary. For terrestrial planets more massive than the Earth, our calculations suggest that a substantial part of the lowermost mantle is in a sluggish convective regime, primarily due to pressure effects on viscosity. Hence, we find substantially higher core temperatures than previously reported from parameterized convection models. We also discuss the effect of melting point depression in the presence of impurities (e.g., sulfur) in iron-rich cores and compare corresponding melting relations to the calculated thermal structure. Since impurity effects become less important at the elevated pressure and temperature conditions prevalent in the deep interior of CoRoT-7b, iron-rich cores are likely solid, implying that a self-sustained magnetic field would be absent.