We report the detection of a bright fast radio burst, FRB\,191108, with Apertif on the Westerbork Synthesis Radio Telescope (WSRT). The interferometer allows us to localise the FRB to a narrow $5\arcsec\times7\arcmin$ ellipse by employing both multibeam information within the Apertif phased-array feed (PAF) beam pattern, and across different tied-array beams. The resulting sight line passes close to Local Group galaxy M33, with an impact parameter of only 18\,kpc with respect to the core. It also traverses the much larger circumgalactic medium of M31, the Andromeda Galaxy. We find that the shared plasma of the Local Group galaxies could contribute $\sim$10\% of its dispersion measure of 588\,pc\,cm$^{-3}$, but not detectable scintillation, temporal scattering, or significant Faraday rotation in this case. FRB\,191108 has a Faraday rotation measure of +474\,$\pm\,3$\,rad\,m$^{-2}$, which is too large to be explained by either the Milky Way or the intergalactic medium. This indicates a dense local magneto-ionic environment in the source host galaxy---as has been argued for other FRBs. We found no accompanying persistent radio sources in the Apertif imaging survey data.

The aim of this study is to search for evidence of a common emission engine between radio giant pulses (GPs) and very-high-energy (VHE, E>100 GeV) gamma-rays from the Crab pulsar. 16 hours of simultaneous observations of the Crab pulsar at 1.4 GHz with the Effelsberg radio telescope and the Westerbork Synthesis Radio Telescope (WSRT), and at energies above 60 GeV with the Major Atmospheric Gamma-ray Imaging Cherenkov (MAGIC) telescopes were performed. We searched for a statistical correlation between the radio and VHE gamma-ray emission with search windows of different lengths and different time lags to the arrival times of a radio GP. A dedicated search for an enhancement in the number of VHE gamma-rays correlated with the occurrence of radio GPs was carried out separately for the P1 and P2 phase ranges respectively. 99444 radio GPs have been detected in the radio data sample. We find no significant correlation between the GPs and VHE photons in any of the search windows. Depending on phase cuts and the chosen search windows we find upper limits at 95% confidence level on an increase in VHE gamma-ray events correlated with radio GPs between 7% and 61% of the average Crab pulsar VHE flux for the P1 and P2 phase ranges respectively. This puts upper limits on the flux increase during a radio GP of 12% to 2900% (depending on search window duration and phase cuts) of the pulsed VHE flux. This is the most stringent upper limit on a correlation between gamma-ray emission and radio GPs reported so far.}

Repeating fast radio bursts (FRBs) present excellent opportunities to identify FRB progenitors and host environments, as well as decipher the underlying emission mechanism. Detailed studies of repeating FRBs might also hold clues to the origin of FRBs as a population. We aim to detect the first two repeating FRBs: FRB 121102 (R1) and FRB 180814.J0422+73 (R2), and characterise their repeat statistics. We also want to significantly improve the sky localisation of R2. We use the Westerbork Synthesis Radio Telescope to conduct extensive follow-up of these two repeating FRBs. The new phased-array feed system, Apertif, allows covering the entire sky position uncertainty of R2 with fine spatial resolution in one pointing. We characterise the energy distribution and the clustering of detected R1 bursts. We detected 30 bursts from R1. Our measurements indicate a dispersion measure of 563.5(2) pc cm$^{-3}$, suggesting a significant increase in DM over the past few years. We place an upper limit of 8% on the linear polarisation fraction of the brightest burst. We did not detect any bursts from R2. A single power-law might not fit the R1 burst energy distribution across the full energy range or widely separated detections. Our observations provide improved constraints on the clustering of R1 bursts. Our stringent upper limits on the linear polarisation fraction imply a significant depolarisation, either intrinsic to the emission mechanism or caused by the intervening medium, at 1400 MHz that is not observed at higher frequencies. The non-detection of any bursts from R2 implies either a highly clustered nature of the bursts, a steep spectral index, or a combination of both. Alternatively, R2 has turned off completely, either permanently or for an extended period of time.

We have studied 4265 giant pulses (GPs) from the millisecond pulsar B1937+21; the largest-ever sample gathered for this pulsar, in observations made with the Large European Array for Pulsars. The pulse energy distribution of GPs associated with the interpulse are well-described by a power law, with index $\alpha = -3.99 \pm 0.04$, while those associated with the main pulse are best-described by a broken power law, with the break occurring at $\sim7$ Jy $\mu$s, with power law indices $\alpha_{\text{low}} = -3.48 \pm 0.04$ and $\alpha_{\text{high}} = -2.10 \pm 0.09$. The modulation indices of the GP emission are measured, which are found to vary by $\sim0.5$ at pulse phases close to the centre of the GP phase distributions. We find the frequency-resolved structure of GPs to vary significantly, and in a manner that cannot be attributed to the interstellar medium influence on the observed pulses. We examine the distribution of polarisation fractions of the GPs and find no correlation between GP emission phase and fractional polarisation. We use the GPs to time PSR B1937+21 and although the achievable time of arrival precision of the GPs is approximately a factor of two greater than that of the average pulse profile, there is a negligible difference in the precision of the overall timing solution when using the GPs.

Symmetries play an important role in modern theories of gravity. The strong equivalence principle (SEP) constitutes a collection of gravitational symmetries which are all implemented by general relativity. Alternative theories, however, are generally expected to violate some aspects of SEP. We test three aspects of SEP using observed change rates in the orbital period and eccentricity of binary pulsar J1713+0747: 1. the gravitational constant's constancy as part of locational invariance of gravitation; 2. the post-Newtonian parameter $\hat{\alpha}_3$ in gravitational Lorentz invariance; 3. the universality of free fall (UFF) for strongly self-gravitating bodies. Based on the pulsar timing result of the combined dataset from the North American Nanohertz Gravitational Observatory (NANOGrav) and the European Pulsar Timing Array (EPTA), we find $\dot{G}/G = (-0.1 \pm 0.9) \times 10^{-12}\,{\rm yr}^{-1}$, which is weaker than Solar system limits, but applies for strongly self-gravitating objects. Furthermore, we obtain the constraints $|\Delta|< 0.002$ for the UFF test and $-3\times10^{-20} < \hat{\alpha}_3 < 4\times10^{-20}$ at 95% confidence. These are the first direct UFF and $\hat{\alpha}_3$ tests based on pulsar binaries, and they overcome various limitations of previous tests.

The Large European Array for Pulsars (LEAP) is a European Pulsar Timing Array project that combines the Lovell, Effelsberg, Nan\c{c}ay, Sardinia, and Westerbork radio telescopes into a single tied-array, and makes monthly observations of a set of millisecond pulsars (MSPs). The overview of our experiment is presented in Bassa et al. (2016). Baseband data are recorded at a central frequency of 1396 MHz and a bandwidth of 128 MHz at each telescope, and are correlated offline on a cluster at Jodrell Bank Observatory using a purpose-built correlator, detailed in Smits et al. (2017). LEAP offers a substantial increase in sensitivity over that of the individual telescopes, and can operate in timing and imaging modes (notably in observations of the galactic centre radio magnetar; Wucknitz 2015). To date, 4 years of observations have been reduced. Here, we report on the scientific projects which have made use of LEAP data.

The Large European Array for Pulsars combines Europe's largest radio telescopes to form a tied-array telescope that provides high signal-to-noise observations of millisecond pulsars (MSPs) with the objective to increase the sensitivity of detecting low-frequency gravitational waves. As part of this endeavor we have developed a software correlator and beamformer which enables the formation of a tied-array beam from the raw voltages from each of telescopes. We explain the concepts and techniques involved in the process of adding the raw voltages coherently. We further present the software processing pipeline that is specifically designed to deal with data from widely spaced, inhomogeneous radio telescopes and describe the steps involved in preparing, correlating and creating the tied-array beam. This includes polarization calibration, bandpass correction, frequency dependent phase correction, interference mitigation and pulsar gating. A link is provided where the software can be obtained.

Single pulses preserve information about the pulsar radio emission and propagation in the pulsar magnetosphere, and understanding the behaviour of their variability is essential for estimating the fundamental limit on the achievable pulsar timing precision. Here we report the findings of our analysis of single pulses from PSR J1713+0747 with data collected by the Large European Array for Pulsars (LEAP). We present statistical studies of the pulse properties that include distributions of their energy, phase and width. Two modes of systematic sub-pulse drifting have been detected, with a periodicity of 7 and 3 pulse periods. The two modes appear at different ranges of pulse longitude but overlap under the main peak of the integrated profile. No evidence for pulse micro-structure is seen with a time resolution down to 140 ns. In addition, we show that the fractional polarisation of single pulses increases with their pulse peak flux density. By mapping the probability density of linear polarisation position angle with pulse longitude, we reveal the existence of two orthogonal polarisation modes. Finally, we find that the resulting phase jitter of integrated profiles caused by single pulse variability can be described by a Gaussian probability distribution only when at least 100 pulses are used for integration. Pulses of different flux densities and widths contribute approximately equally to the phase jitter, and no improvement on timing precision is achieved by using a sub-set of pulses with a specific range of flux density or width.

Dense, continuous pulsar timing observations over a 24-hr period provide a method for probing intermediate gravitational wave (GW) frequencies from 10 microhertz to 20 millihertz. The European Pulsar Timing Array (EPTA), the North American Nanohertz Observatory for Gravitational Waves (NANOGrav), the Parkes Pulsar Timing Array (PPTA), and the combined International Pulsar Timing Array (IPTA) all use millisecond pulsar observations to detect or constrain GWs typically at nanohertz frequencies. In the case of the IPTA's nine-telescope 24-Hour Global Campaign on millisecond pulsar J1713+0747, GW limits in the intermediate frequency regime can be produced. The negligible change in dispersion measure during the observation minimizes red noise in the timing residuals, constraining any contributions from GWs due to individual sources. At 10$^{-5}$Hz, the 95% upper limit on strain is 10$^{-11}$ for GW sources in the pulsar's direction.

A background of nanohertz gravitational waves from supermassive black hole binaries could soon be detected by pulsar timing arrays, which measure the times-of-arrival of radio pulses from millisecond pulsars with very high precision. The European Pulsar Timing Array uses five large European radio telescopes to monitor high-precision millisecond pulsars, imposing in this way strong constraints on a gravitational wave background. To achieve the necessary precision needed to detect gravitational waves, the Large European Array for Pulsars (LEAP) performs simultaneous observations of pulsars with all five telescopes, which allows us to coherently add the radio pulses, maximize the signal-to-noise of pulsar signals and increase the precision of times-of-arrival. We report on the progress made and results obtained by the LEAP collaboration, and in particular on the addition of the Sardinia Radio Telescope to the LEAP observations during its scientific validation phase. In addition, we discuss how LEAP can be used to monitor strong-gravity systems such as double neutron star systems and impose strong constraints on post-keplerian parameters.

We report on 22 yrs of radio timing observations of the millisecond pulsar J1024$-$0719 by the telescopes participating in the European Pulsar Timing Array (EPTA). These observations reveal a significant second derivative of the pulsar spin frequency and confirm the discrepancy between the parallax and Shklovskii distances that has been reported earlier. We also present optical astrometry, photometry and spectroscopy of 2MASS J10243869$-$0719190. We find that it is a low-metallicity main-sequence star (K7V spectral type, $\mathrm{[M/H]}=-1.0$, $T_\mathrm{eff}=4050\pm50$ K) and that its position, proper motion and distance are consistent with those of PSR J1024$-$0719. We conclude that PSR J1024$-$0719 and 2MASS J10243869$-$0719190 form a common proper motion pair and are gravitationally bound. The gravitational interaction between the main-sequence star and the pulsar accounts for the spin frequency derivatives, which in turn resolves the distance discrepancy. Our observations suggest that the pulsar and main-sequence star are in an extremely wide ($P_\mathrm{b}>200$ yr) orbit. Combining the radial velocity of the companion and proper motion of the pulsar, we find that the binary system has a high spatial velocity of $384\pm45$ km s$^{-1}$ with respect to the local standard of rest and has a Galactic orbit consistent with halo objects. Since the observed main-sequence companion star cannot have recycled the pulsar to millisecond spin periods, an exotic formation scenario is required. We demonstrate that this extremely wide-orbit binary could have evolved from a triple system that underwent an asymmetric supernova explosion, though find that significant fine-tuning during the explosion is required. Finally, we discuss the implications of the long period orbit on the timing stability of PSR J1024$-$0719 in light of its inclusion in pulsar timing arrays.

We report on the high-precision timing of 42 radio millisecond pulsars (MSPs) observed by the European Pulsar Timing Array (EPTA). This EPTA Data Release 1.0 extends up to mid-2014 and baselines range from 7-18 years. It forms the basis for the stochastic gravitational-wave background, anisotropic background, and continuous-wave limits recently presented by the EPTA elsewhere. The Bayesian timing analysis performed with TempoNest yields the detection of several new parameters: seven parallaxes, nine proper motions and, in the case of six binary pulsars, an apparent change of the semi-major axis. We find the NE2001 Galactic electron density model to be a better match to our parallax distances (after correction from the Lutz-Kelker bias) than the M2 and M3 models by Schnitzeler (2012). However, we measure an average uncertainty of 80\% (fractional) for NE2001, three times larger than what is typically assumed in the literature. We revisit the transverse velocity distribution for a set of 19 isolated and 57 binary MSPs and find no statistical difference between these two populations. We detect Shapiro delay in the timing residuals of PSRs J1600$-$3053 and J1918$-$0642, implying pulsar and companion masses $m_p=1.22_{-0.35}^{+0.5} \text{M}_{\odot}$, $m_c = 0.21_{-0.04}^{+0.06} \text{M}_{\odot }$ and $m_p=1.25_{-0.4}^{+0.6} \text{M}_{\odot}$, $m_c = 0.23_{-0.05}^{+0.07} \text{M}_{\odot }$, respectively. Finally, we use the measurement of the orbital period derivative to set a stringent constraint on the distance to PSRs J1012$+$5307 and J1909$-$3744, and set limits on the longitude of ascending node through the search of the annual-orbital parallax for PSRs J1600$-$3053 and J1909$-$3744.

We analyse the stochastic properties of the 49 pulsars that comprise the first International Pulsar Timing Array (IPTA) data release. We use Bayesian methodology, performing model selection to determine the optimal description of the stochastic signals present in each pulsar. In addition to spin-noise and dispersion-measure (DM) variations, these models can include timing noise unique to a single observing system, or frequency band. We show the improved radio-frequency coverage and presence of overlapping data from different observing systems in the IPTA data set enables us to separate both system and band-dependent effects with much greater efficacy than in the individual PTA data sets. For example, we show that PSR J1643$-$1224 has, in addition to DM variations, significant band-dependent noise that is coherent between PTAs which we interpret as coming from time-variable scattering or refraction in the ionised interstellar medium. Failing to model these different contributions appropriately can dramatically alter the astrophysical interpretation of the stochastic signals observed in the residuals. In some cases, the spectral exponent of the spin noise signal can vary from 1.6 to 4 depending upon the model, which has direct implications for the long-term sensitivity of the pulsar to a stochastic gravitational-wave (GW) background. By using a more appropriate model, however, we can greatly improve a pulsar's sensitivity to GWs. For example, including system and band-dependent signals in the PSR J0437$-$4715 data set improves the upper limit on a fiducial GW background by $\sim 60\%$ compared to a model that includes DM variations and spin-noise only.

The highly stable spin of neutron stars can be exploited for a variety of (astro-)physical investigations. In particular arrays of pulsars with rotational periods of the order of milliseconds can be used to detect correlated signals such as those caused by gravitational waves. Three such "Pulsar Timing Arrays" (PTAs) have been set up around the world over the past decades and collectively form the "International" PTA (IPTA). In this paper, we describe the first joint analysis of the data from the three regional PTAs, i.e. of the first IPTA data set. We describe the available PTA data, the approach presently followed for its combination and suggest improvements for future PTA research. Particular attention is paid to subtle details (such as underestimation of measurement uncertainty and long-period noise) that have often been ignored but which become important in this unprecedentedly large and inhomogeneous data set. We identify and describe in detail several factors that complicate IPTA research and provide recommendations for future pulsar timing efforts. The first IPTA data release presented here (and available online) is used to demonstrate the IPTA's potential of improving upon gravitational-wave limits placed by individual PTAs by a factor of ~2 and provides a 2-sigma limit on the dimensionless amplitude of a stochastic GWB of 1.7x10^{-15} at a frequency of 1 yr^{-1}. This is 1.7 times less constraining than the limit placed by (Shannon et al. 2015), due mostly to the more recent, high-quality data they used.

The sensitivity of Pulsar Timing Arrays to gravitational waves depends on the noise present in the individual pulsar timing data. Noise may be either intrinsic or extrinsic to the pulsar. Intrinsic sources of noise will include rotational instabilities, for example. Extrinsic sources of noise include contributions from physical processes which are not sufficiently well modelled, for example, dispersion and scattering effects, analysis errors and instrumental instabilities. We present the results from a noise analysis for 42 millisecond pulsars (MSPs) observed with the European Pulsar Timing Array. For characterising the low-frequency, stochastic and achromatic noise component, or "timing noise", we employ two methods, based on Bayesian and frequentist statistics. For 25 MSPs, we achieve statistically significant measurements of their timing noise parameters and find that the two methods give consistent results. For the remaining 17 MSPs, we place upper limits on the timing noise amplitude at the 95% confidence level. We additionally place an upper limit on the contribution to the pulsar noise budget from errors in the reference terrestrial time standards (below 1%), and we find evidence for a noise component which is present only in the data of one of the four used telescopes. Finally, we estimate that the timing noise of individual pulsars reduces the sensitivity of this data set to an isotropic, stochastic GW background by a factor of >9.1 and by a factor of >2.3 for continuous GWs from resolvable, inspiralling supermassive black-hole binaries with circular orbits.

The Large European Array for Pulsars (LEAP) is an experiment that harvests the collective power of Europe's largest radio telescopes in order to increase the sensitivity of high-precision pulsar timing. As part of the ongoing effort of the European Pulsar Timing Array (EPTA), LEAP aims to go beyond the sensitivity threshold needed to deliver the first direct detection of gravitational waves. The five telescopes presently included in LEAP are: the Effelsberg telescope, the Lovell telescope at Jodrell Bank, the Nan\c cay radio telescope, the Sardinia Radio Telescope and the Westerbork Synthesis Radio Telescope. Dual polarization, Nyquist-sampled time-series of the incoming radio waves are recorded and processed offline to form the coherent sum, resulting in a tied-array telescope with an effective aperture equivalent to a 195-m diameter circular dish. All observations are performed using a bandwidth of 128 MHz centered at a frequency of 1396 MHz. In this paper, we present the design of the LEAP experiment, the instrumentation, the storage and transfer of data, and the processing hardware and software. In particular, we present the software pipeline that was designed to process the Nyquist-sampled time-series, measure the phase and time delays between each individual telescope and a reference telescope and apply these delays to form the tied-array coherent addition. The pipeline includes polarization calibration and interference mitigation. We also present the first results from LEAP and demonstrate the resulting increase in sensitivity, which leads to an improvement in the pulse arrival times.

We have searched for continuous gravitational wave (CGW) signals produced by individually resolvable, circular supermassive black hole binaries (SMBHBs) in the latest EPTA dataset, which consists of ultra-precise timing data on 41 millisecond pulsars. We develop frequentist and Bayesian detection algorithms to search both for monochromatic and frequency-evolving systems. None of the adopted algorithms show evidence for the presence of such a CGW signal, indicating that the data are best described by pulsar and radiometer noise only. Depending on the adopted detection algorithm, the 95\% upper limit on the sky-averaged strain amplitude lies in the range $6\times 10^{-15}<A<1.5\times10^{-14}$ at $5{\rm nHz}<f<7{\rm nHz}$. This limit varies by a factor of five, depending on the assumed source position, and the most constraining limit is achieved towards the positions of the most sensitive pulsars in the timing array. The most robust upper limit -- obtained via a full Bayesian analysis searching simultaneously over the signal and pulsar noise on the subset of ours six best pulsars -- is $A\approx10^{-14}$. These limits, the most stringent to date at $f<10{\rm nHz}$, exclude the presence of sub-centiparsec binaries with chirp mass $\cal{M}_c>10^9$M$_\odot$ out to a distance of about 25Mpc, and with $\cal{M}_c>10^{10}$M$_\odot$ out to a distance of about 1Gpc ($z\approx0.2$). We show that state-of-the-art SMBHB population models predict $<1\%$ probability of detecting a CGW with the current EPTA dataset, consistent with the reported non-detection. We stress, however, that PTA limits on individual CGW have improved by almost an order of magnitude in the last five years. The continuing advances in pulsar timing data acquisition and analysis techniques will allow for strong astrophysical constraints on the population of nearby SMBHBs in the coming years.

We present new limits on an isotropic stochastic gravitational-wave background (GWB) using a six pulsar dataset spanning 18 yr of observations from the 2015 European Pulsar Timing Array data release. Performing a Bayesian analysis, we fit simultaneously for the intrinsic noise parameters for each pulsar, along with common correlated signals including clock, and Solar System ephemeris errors, obtaining a robust 95$\%$ upper limit on the dimensionless strain amplitude $A$ of the background of $A<3.0\times 10^{-15}$ at a reference frequency of $1\mathrm{yr^{-1}}$ and a spectral index of $13/3$, corresponding to a background from inspiralling super-massive black hole binaries, constraining the GW energy density to $\Omega_\mathrm{gw}(f)h^2 < 1.1\times10^{-9}$ at 2.8 nHz. We also present limits on the correlated power spectrum at a series of discrete frequencies, and show that our sensitivity to a fiducial isotropic GWB is highest at a frequency of $\sim 5\times10^{-9}$~Hz. Finally we discuss the implications of our analysis for the astrophysics of supermassive black hole binaries, and present 95$\%$ upper limits on the string tension, $G\mu/c^2$, characterising a background produced by a cosmic string network for a set of possible scenarios, and for a stochastic relic GWB. For a Nambu-Goto field theory cosmic string network, we set a limit $G\mu/c^2<1.3\times10^{-7}$, identical to that set by the {\it Planck} Collaboration, when combining {\it Planck} and high-$\ell$ Cosmic Microwave Background data from other experiments. For a stochastic relic background we set a limit of $\Omega^\mathrm{relic}_\mathrm{gw}(f)h^2<1.2 \times10^{-9}$, a factor of 9 improvement over the most stringent limits previously set by a pulsar timing array.

The paucity of observed supermassive black hole binaries (SMBHBs) may imply that the gravitational wave background (GWB) from this population is anisotropic, rendering existing analyses sub-optimal. We present the first constraints on the angular distribution of a nanohertz stochastic GWB from circular, inspiral-driven SMBHBs using the $2015$ European Pulsar Timing Array data [Desvignes et al. (in prep.)]. Our analysis of the GWB in the $\sim 2 - 90$ nHz band shows consistency with isotropy, with the strain amplitude in $l>0$ spherical harmonic multipoles $\lesssim 40\%$ of the monopole value. We expect that these more general techniques will become standard tools to probe the angular distribution of source populations.

Millisecond pulsars (MSPs) are known as highly stable celestial clocks. Nevertheless, recent studies have revealed the unstable nature of their integrated pulse profiles, which may limit the achievable pulsar timing precision. In this paper, we present a case study on the pulse profile variability of PSR J1022+1001. We have detected approximately 14,000 sub-pulses (components of single pulses) in 35-hr long observations, mostly located at the trailing component of the integrated profile. Their flux densities and fractional polarisation suggest that they represent the bright end of the energy distribution in ordinary emission mode and are not giant pulses. The occurrence of sub-pulses from the leading and trailing components of the integrated profile is shown to be correlated. For sub-pulses from the latter, a preferred pulse width of approximately 0.25 ms has been found. Using simultaneous observations from the Effelsberg 100-m telescope and the Westerbork Synthesis Radio Telescope, we have found that the integrated profile varies on a timescale of a few tens of minutes. We show that improper polarisation calibration and diffractive scintillation cannot be the sole reason for the observed instability. In addition, we demonstrate that timing residuals generated from averages of the detected sub-pulses are dominated by phase jitter, and place an upper limit of ~700 ns for jitter noise based on continuous 1-min integrations.

The radio millisecond pulsar J1713+0747 is regarded as one of the highest-precision clocks in the sky, and is regularly timed for the purpose of detecting gravitational waves. The International Pulsar Timing Array collaboration undertook a 24-hour global observation of PSR J1713+0747 in an effort to better quantify sources of timing noise in this pulsar, particularly on intermediate (1 - 24 hr) timescales. We observed the pulsar continuously over 24 hr with the Arecibo, Effelsberg, GMRT, Green Bank, LOFAR, Lovell, Nancay, Parkes, and WSRT radio telescopes. The combined pulse times-of-arrival presented here provide an estimate of what sources of timing noise, excluding DM variations, would be present as compared to an idealized root-N improvement in timing precision, where N is the number of pulses analyzed. In the case of this particular pulsar, we find that intrinsic pulse phase jitter dominates arrival time precision when the S/N of single pulses exceeds unity, as measured using the eight telescopes that observed at L-band/1.4 GHz. We present first results of specific phenomena probed on the unusually long timescale (for a single continuous observing session) of tens of hours, in particular interstellar scintillation, and discuss the degree to which scintillation and profile evolution affect precision timing. This paper presents the data set as a basis for future, deeper studies.

Simultaneous observations at four different frequencies viz. 313, 607, 1380 and 4850 MHz, for three pulsars, PSRs B0031-07, B0809+74 and B2319+60, are reported in this paper. Identified null and burst pulses are highly concurrent across more than decade of frequency. Small fraction of non-concurrent pulses (less than or equal to 3%) are observed, most of which occur at the transition instances. We report, with very high significance for the first time, full broadband nature of the nulling phenomenon in these three pulsars. These results suggest that nulling invokes changes on the global magnetospheric scale.

In order to reach the sensitivity required to detect gravitational waves, pulsar timing array experiments need to mitigate as much noise as possible in timing data. A dominant amount of noise is likely due to variations in the dispersion measure. To correct for such variations, we develop a statistical method inspired by the maximum likelihood estimator and optimal filtering. Our method consists of two major steps. First, the spectral index and amplitude of dispersion measure variations are measured via a time-domain spectral analysis. Second, the linear optimal filter is constructed based on the model parameters found in the first step, and is used to extract the dispersion measure variation waveforms. Compared to current existing methods, this method has better time resolution for the study of short timescale dispersion variations, and generally produces smaller errors in waveform estimations. This method can process irregularly sampled data without any interpolation because of its time-domain nature. Furthermore, it offers the possibility to interpolate or extrapolate the waveform estimation to regions where no data is available. Examples using simulated data sets are included for demonstration.

In order to maximize the sensitivity of pulsar timing arrays to a stochastic gravitational wave background, we present computational techniques to optimize observing schedules. The techniques are applicable to both single and multi-telescope experiments. The observing schedule is optimized for each telescope by adjusting the observing time allocated to each pulsar while keeping the total amount of observing time constant. The optimized schedule depends on the timing noise characteristics of each individual pulsar as well as the performance of instrumentation. Several examples are given to illustrate the effects of different types of noise. A method to select the most suitable pulsars to be included in a pulsar timing array project is also presented.

Direct detection of low-frequency gravitational waves ($10^{-9} - 10^{-8}$ Hz) is the main goal of pulsar timing array (PTA) projects. One of the main targets for the PTAs is to measure the stochastic background of gravitational waves (GWB) whose characteristic strain is expected to approximately follow a power-law of the form $h_c(f)=A (f/\hbox{yr}^{-1})^{\alpha}$, where $f$ is the gravitational-wave frequency. In this paper we use the current data from the European PTA to determine an upper limit on the GWB amplitude $A$ as a function of the unknown spectral slope $\alpha$ with a Bayesian algorithm, by modelling the GWB as a random Gaussian process. For the case $\alpha=-2/3$, which is expected if the GWB is produced by supermassive black-hole binaries, we obtain a 95% confidence upper limit on $A$ of $6\times 10^{-15}$, which is 1.8 times lower than the 95% confidence GWB limit obtained by the Parkes PTA in 2006. Our approach to the data analysis incorporates the multi-telescope nature of the European PTA and thus can serve as a useful template for future intercontinental PTA collaborations.

Abbreviated: We investigate the potential of detecting the gravitational wave from individual binary black hole systems using pulsar timing arrays (PTAs) and calculate the accuracy for determining the GW properties. This is done in a consistent analysis, which at the same time accounts for the measurement of the pulsar distances via the timing parallax. We find that, at low redshift, a PTA is able to detect the nano-Hertz GW from super massive black hole binary systems with masses of $\sim10^8 - 10^{10}\,M_{\sun}$ less than $\sim10^5$\,years before the final merger, and those with less than $\sim10^3 - 10^4$ years before merger may allow us to detect the evolution of binaries. We derive an analytical expression to describe the accuracy of a pulsar distance measurement via timing parallax. We consider five years of bi-weekly observations at a precision of 15\,ns for close-by ($\sim 0.5 - 1$\,kpc) pulsars. Timing twenty pulsars would allow us to detect a GW source with an amplitude larger than $5\times 10^{-17}$. We calculate the corresponding GW and binary orbital parameters and their measurement precision. The accuracy of measuring the binary orbital inclination angle, the sky position, and the GW frequency are calculated as functions of the GW amplitude. We note that the "pulsar term", which is commonly regarded as noise, is essential for obtaining an accurate measurement for the GW source location. We also show that utilizing the information encoded in the GW signal passing the Earth also increases the accuracy of pulsar distance measurements. If the gravitational wave is strong enough, one can achieve sub-parsec distance measurements for nearby pulsars with distance less than $\sim 0.5 - 1$\,kpc.

We have conducted radio timing observations of the eclipsing millisecond binary pulsar J2051-0827 with the European Pulsar Timing Array network of telescopes and the Parkes radio telescope, spanning over 13 years. The increased data span allows significant measurements of the orbital eccentricity, e = (6.2 {\pm} 1.3) {\times} 10^{-5} and composite proper motion, {\mu}_t = 7.3 {\pm} 0.4 mas/yr. Our timing observations have revealed secular variations of the projected semi-major axis of the pulsar orbit which are much more extreme than those previously published; and of the orbital period of the system. Investigation of the physical mechanisms producing such variations confirm that the variations of the semi-major axis are most probably caused by classical spin-orbit coupling in the binary system, while the variations in orbital period are most likely caused by tidal dissipation leading to changes in the gravitational quadrupole moment of the companion.

Parallax measurements of pulsars allow for accurate measurements of the interstellar electron density and contribute to accurate tests of general relativity using binary systems. The Square Kilometre Array (SKA) will be an ideal instrument for measuring the parallax of pulsars, because it has a very high sensitivity, as well as baselines extending up to several thousands of kilometres. We performed simulations to estimate the number of pulsars for which the parallax can be measured with the SKA and the distance to which a parallax can be measured. We compare two different methods. The first method measures the parallax directly by utilising the long baselines of the SKA to form high angular resolution images. The second method uses the arrival times of the radio signals of pulsars to fit a transformation between time coordinates in the terrestrial frame and the comoving pulsar frame directly yielding the parallax. We find that with the first method a parallax with an accuracy of 20% or less can be measured up to a maximum distance of 13 kpc, which would include 9,000 pulsars. By timing pulsars with the most stable arrival times for the radio emission, parallaxes can be measured for about 3,600 millisecond pulsars up to a distance of 9 kpc with an accuracy of 20%.

The Australian Square Kilometre Array Pathfinder (ASKAP) is a 36-element array with a 30-square-degree field of view being built at the proposed SKA site in Western Australia. We are conducting a Design Study for pulsar observations with ASKAP, planning both timing and search observations. We provide an overview of the ASKAP telescope and an update on pulsar-related progress.

The European Pulsar Timing Array (EPTA) is a multi-institutional, multi-telescope collaboration, with the goal of using high-precision pulsar timing to directly detect gravitational waves. In this article we discuss the EPTA member telescopes, current achieved timing precision, and near-future goals. We report a preliminary upper limit to the amplitude of a gravitational wave background. We also discuss the Large European Array for Pulsars, in which the five major European telescopes involved in pulsar timing will be combined to provide a coherent array that will give similar sensitivity to the Arecibo radio telescope, and larger sky coverage.

With a collecting area of 70 000 m^2, the Five hundred metre Aperture Spherical Telescope (FAST) will allow for great advances in pulsar astronomy. We have performed simulations to estimate the number of previously unknown pulsars FAST will find with its 19-beam or possibly 100-beam receivers for different survey strategies. With the 19-beam receiver, a total of 5200 previously unknown pulsars could be discovered in the Galactic plane, including about 460 millisecond pulsars (MSPs). Such a survey would take just over 200 days with eight hours survey time per day. We also estimate that, with about 80 six-hour days, a survey of M31 and M33 could yield 50--100 extra-Galactic pulsars. A 19-beam receiver would produce just under 500 MB of data per second and requires about 9 tera-ops to perform the major part of a real time analysis. We also simulate the logistics of high-precision timing of MSPs with FAST. Timing of the 50 brightest MSPs to a signal-to-noise of 500 would take about 24 hours per epoch.

The Square Kilometre Array (SKA) is a planned multi purpose radio telescope with a collecting area approaching 1 million square metres. One of the key science objectives of the SKA is to provide exquisite strong-field tests of gravitational physics by finding and timing pulsars in extreme binary systems such as a pulsar-black hole binary. To find out how three preliminary SKA configurations will affect a pulsar survey, we have simulated SKA pulsar surveys for each configuration. We estimate that the total number of normal pulsars the SKA will detect, using only the 1-km core and 30 minutes integration time, is around 14000 normal pulsar and 6000 millisecond pulsars. We describe a simple strategy for follow-up timing observations and find that, depending on the configuration, it would take 1-6 days to obtain a single timing point for 14000 pulsars. Obtaining a single timing point for the high-precision timing projects of the SKA, will take less than 14 hours, 2 days, or 3 days, depending on the configuration. The presence of aperture arrays will be of great benefit here. We also study the computational requirements for beam forming and data analysis for a pulsar survey. Beam forming of the full field of view of the single-pixel feed 15-m dishes using the 1-km core of the SKA requires about 2.2*10^15 operations per second. The corresponding data rate from such a pulsar survey is about 4.7*10^11 bytes per second. The required computational power for a deep real time analysis is estimated to be 1.2*10^16 operations per second. For an aperture array or dishes equipped with phased array feeds, the survey can be performed faster, but the computational requirements and data rates will go up.

Here we present the results from an analysis of a multifrequency simultaneous observation of PSR B0031$-$07. We have constructed a geometrical model, based on an empirical relationship between height and frequency of emission, that reproduces many of the observed characteristics. The model suggests very low emission altitudes for this pulsar of only a few kilometers above the star's surface.