We present the results of photometric observations of active asteroid (6478) Gault performed at heliocentric distances from 2.46 to 2.30 au and geocentric distances from 1.79 to 1.42 au between January 15 and March 28, 2019. Observations were carried out at the 2.5-m telescope of SAI MSU (CMO) on January 15, 2019 and at the 1.3-m and 0.61-m telescopes (SPb) on February 6 and March 28, 2019, respectively. The direct images of the asteroid were obtained with the broad-band B, V and R filters. Comet-like structures were detected at all observation dates. Colour maps were built and colour variations along the tail for the observation made on January 15, 2019 were analyzed. The $Af\rho$ was calculated for the R filter, The evaluated value varies from 47 to 32 cm for the period from January to the end of March, 2019. The rotational period of the body is estimated from the light curve by different methods and is about 1.79 hr. Possible mechanisms of triggering Gault's activity are discussed.

One of the key findings of the Rosetta's mission to the Jupiter family comet 67P/Churyumov-Gerasimenko was its peculiar bilobed shape along with the apparent north/south dichotomy in large scale morphology. This has re-ignited scientific discussions on the topic of origin, evolution and age of the nucleus. In this work we set up a general numerical investigation on the role of solar driven activity on the overall shape change. Our goal is to isolate and study the influence of key parameters for solar driven mass loss, and hopefully obtain a classification of the final shapes. We consider five general classes of three-dimensional (3D) objects for various initial conditions of spin-axis and orbital parameters, propagating them on different orbits accounting for solar driven CO ice sublimation. A detailed study of the coupling between sublimation curve and orbital parameters (for CO and H$_{2}$O ices) is also provided. The idealizations used in this study are aimed to remove the ad-hoc assumptions on activity source distribution, composition, and/or chemical inhomogeneities as applied in similar studies focusing on explaining a particular feature or observation. Our numerical experiments show that under no condition a homogeneous nucleus with solar driven outgassing can produce concave morphology on a convex shape. On the other hand, preexisting concavities can hardly be smoothed/removed for the assumed activity. In summary, the coupling between solar distance, eccentricity, spin-axis and its orientation, as well as effects on shadowing and self-heating do combine to induce morphology changes that might not be deducible without numerical simulations.

The physical properties of cometary nuclei observed today relate to their complex history and help to constrain their formation and evolution. In this article, we review some of the main physical properties of cometary nuclei and focus in particular on the thermal, mechanical, structural and dielectric properties, emphasizing the progress made during the Rosetta mission. Comets have a low density of 480 $\pm$ 220 kg m-3 and a low permittivity of 1.9 - 2.0, consistent with a high porosity of 70 - 80 %, are weak with a very low global tensile strength $<$100 Pa, and have a low bulk thermal inertia of 0 - 60 J K-1 m-2 s-1/2 that allowed them to preserve highly volatiles species (e.g. CO, CO2, CH4, N2) into their interior since their formation. As revealed by 67P/Churyumov-Gerasimenko, the above physical properties vary across the nucleus, spatially at its surface but also with depth. The broad picture is that the bulk of the nucleus consists of a weakly bonded, rather homogeneous material that preserved primordial properties under a thin shell of processed material, and possibly covered by a granular material; this cover might in places reach a thickness of several meters. The properties of the top layer (the first meter) are not representative of that of the bulk nucleus. More globally, strong nucleus heterogeneities at a scale of a few meters are ruled out on 67P small lobe.

Comets are made of volatile and refractory material and naturally experience various degrees of sublimation as they orbit around the Sun. This gas release, accompanied by dust, represents what is traditionally described as activity. Although the basic principles are well established, most details remain elusive, especially regarding the mechanisms by which dust is detached from the surface and subsequently accelerated by the gas flows surrounding the nucleus. During its 2 years rendez-vous with comet 67P/Churyumov-Gerasimenko, ESA's Rosetta has observed cometary activity with unprecedented details, in both the inbound and outbound legs of the comet's orbit. This trove of data provides a solid ground on which new models of activity can be built. In this chapter, we review how activity manifests at close distance from the surface, establish a nomenclature for the different types of observed features, discuss how activity is at the same time transforming and being shaped by the topography, and finally address several potential mechanisms.

We present an analysis of the photometric and spectroscopic data of the comet C/2012 S1 (ISON) observed at the heliocentric distances of 6.21\div 4.81 AU. The photometric observations were made with the 60-cm Zeiss-600 telescope (ICAMER, peak Terskol, Russia) and the spectroscopic observations were performed using the SCORPIO-2 focal reducer mounted in the prime focus of the 6-m BTA telescope (SAO RAS, Russia). We analyse the B, V and R-band images to describe the dusty cometary coma and to investigate its brightness, colours and dust production rate. The spectra cover the wavelength range of 3600\div 7070 \AA. No emissions which are expected in this wavelength region were detected above the 3$\sigma$ level. The continuum shows a reddening effect with the normalized gradient of reflectivity along dispersion of (9.3$\pm$1.1)% per 1000 \AA. A dust-loss rate was derived using the obtained values and under the different model assumptions. Our simulations clearly indicate that to retrieve dust production from the observational Af$\rho$ parameter is an ambiguous task. The result of such a procedure is strongly dependent on dynamical (e.g. effective density and cross-section) as well as optical (e.g. scattering coefficient and phase function) characteristics of dust grains. A variation of the mentioned parameters can lead to dramatic changes in the evaluation of mass production. We demonstrate that the dynamic and optical properties are interconnected via the microscopic properties of dust grains (effective size and porosity).

We collect observational evidence that supports the scheme of mass transfer on the nucleus of comet 67P/Churyumov-Gerasimenko. The obliquity of the rotation axis of 67P causes strong seasonal variations. During perihelion the southern hemisphere is four times more active than the north. Northern territories are widely covered by granular material that indicates back fall originating from the active south. Decimetre sized chunks contain water ice and their trajectories are influenced by an anti-solar force instigated by sublimation. OSIRIS observations suggest that up to 20 % of the particles directly return to the nucleus surface taking several hours of travel time. The back fall covered northern areas are active if illuminated but produce mainly water vapour. The decimetre chunks from the nucleus surface are too small to contain more volatile compounds such as CO 2 or CO. This causes a north-south dichotomy of the composition measurements in the coma. Active particles are trapped in the gravitational minimum of Hapi during northern winter. They are "shock frozen" and only reactivated when the comet approaches the sun after its aphelion passage. The insolation of the big cavity is enhanced by self-heating, i. e. reflection and IR radiation from the walls. This, together with the pristinity of the active back fall, explains the early observed activity of the Hapi region. Sobek may be a role model for the consolidated bottom of Hapi. Mass transfer in the case of 67P strongly influences the evolution of the nucleus and the interpretation of coma measurements.

We present a model of cometary dust capable of simulating the dynamics within the first few tens of km of the comet surface. Recent measurements by the GIADA and COSIMA instruments on Rosetta show that the nucleus emits fluffy dust particles with porosities above 50% and sizes up to at least mm (Schulz et al. 2015, Rotundi et al. 2015, Fulle et al. 2015). Retrieval of the physical properties of these particles requires a model of the effective forces governing their dynamics. Here, we present a model capable of simulating realistic, large and porous particles using hierarchical aggregates, which shows previous extrapolations to be inadequate. The main strengths of our approach are that we can simulate very large (mm-scale) non-spherical agglomerates and can accurately determine their 1) effective cross-section and ratio of cross-section to mass, 2) gas drag coefficient, and 3) light scattering properties. In practical terms, we find that a more detailed treatment of the dust structure results in 3-5 times higher velocities for large dust particles in the inner coma than previously estimated using spherical particles of the same mass. We apply our model to the dynamics of dust in the vicinity of the nucleus of comet 67P and successfully reproduce the dust speeds reported early on when the comet was roughly 3.5 AU from the Sun. At this stage, we employ a simple spherical comet nucleus, we model activity as constant velocity gas expansion from a uniformly active surface, and use Mie scattering. We discuss pathways to improve on these simplifications in the future.

We use the gravitational instability formation scenario of cometesimals to derive the aggregate size that can be released by the gas pressure from the nucleus of comet 67P/Churyumov-Gerasimenko for different heliocentric distances and different volatile ices. To derive the ejected aggregate sizes, we developed a model based on the assumption that the entire heat absorbed by the surface is consumed by the sublimation process of one volatile species. The calculations were performed for the three most prominent volatile materials in comets, namely, H_20 ice, CO_2 ice, and CO ice. We find that the size range of the dust aggregates able to escape from the nucleus into space widens when the comet approaches the Sun and narrows with increasing heliocentric distance, because the tensile strength of the aggregates decreases with increasing aggregate size. The activity of CO ice in comparison to H_20 ice is capable to detach aggregates smaller by approximately one order of magnitude from the surface. As a result of the higher sublimation rate of CO ice, larger aggregates are additionally able to escape from the gravity field of the nucleus. Our model can explain the large grains (ranging from 2 cm to 1 m in radius) in the inner coma of comet 67P/Churyumov-Gerasimenko that have been observed by the OSIRIS camera at heliocentric distances between 3.4 AU and 3.7 AU. Furthermore, the model predicts the release of decimeter-sized aggregates (trail particles) close to the heliocentric distance at which the gas-driven dust activity vanishes. However, the gas-driven dust activity cannot explain the presence of particles smaller than ~1 mm in the coma because the high tensile strength required to detach these particles from the surface cannot be provided by evaporation of volatile ices. These smaller particles can be produced for instance by spin-up and centrifugal mass loss of ejected larger aggregates.

In this work, a novel approach to explain the survival of sungrazing comets within the Roche limit is presented. It is shown that in the case of low tensile strength of the cometary nucleus, tidal splitting of the nucleus can be prevented by the reaction force caused by the sublimation of the icy constituents. The survival of Comet C/2011 W3 (Lovejoy) within the Roche limit of the Sun is, thus, the result of high tensile strength of the nucleus, or the result of the reaction force caused by the strong outgassing of the icy constituents near the Sun.

We developed a thermophysical model for cometary nuclei, which is based upon the assumption that comets form by the gravitational instability of an ensemble of dust and ice aggregates. Under this condition, the tensile strength of the ice-free outer layers of a cometary nucleus can be calculated, using the dust-aggregate collision and adhesion model of Weidling et al. (2011). Based on available laboratory data on the gas permeability and thermal conductivity of ice-free dust layers, we derived the temperature and pressure at the dust-ice interface for pure water and pure carbon dioxide ice. Comparison of the vapor pressure below the dust crust with its tensile strength allows the prediction of dust release from cometary surfaces. Our model predicts dust activity for pure CO2 ice and for heliocentric distances of <~ 3 AU, whereas pure H2O ice cannot explain the dust emission

We present a non-invasive technique for measuring the thermal conductivity of fragile and sensitive materials. In the context of planet formation research, the investigation of the thermal conductivity of porous dust aggregates provide important knowledge about the influence of heating processes, like internal heating by radioactive decay of short-lived nuclei, e.g. 26Al, on the evolution and growth of planetesimals. The determination of the thermal conductivity was performed by a combination of laboratory experiments and numerical simulations. An IR camera measured the temperature distribution of the sample surface heated by a well-characterized laser beam. The thermal conductivity as free parameter in the model calculations, exactly emulating the experiment, was varied until the experimental and numerical temperature distributions showed best agreement. Thus, we determined for three types of porous dust samples, consisting of spherical, micrometer-sized SiO2 particles, with volume filling factors in the range of 15% to 54%, the thermal conductivity to be 0.002 to 0.02 W/(m*K), respectively. From our results, we can conclude that the thermal conductivity mainly depends on the volume filling factor. Further investigations, which are planned for different materials and varied contact area sizes (produced by sintering), will prove the appropriate dependencies in more detail.

Our knowledge about the physical processes determining the activity of comets were mainly influenced by several extremely successful space missions, the predictions of theoretical models and the results of laboratory experiments. However, novel computer models should not be treated in isolation but should be based on experimental results. Therefore, a new experimental setup was constructed to investigate the temperature dependent sublimation properties of hexagonal water ice and the gas diffusion through a dry dust layer covering the ice surface. We show that this experimental setup is capable to reproduce known gas production rates of pure hexagonal water ice. The reduction of the gas production rate due to an additional dust layer on top of the ice surface was measured and compared to the results of another experimental setup in which the gas diffusion through dust layers at room temperature was investigated. We found that the relative permeability of the dust layer is inversely proportional to its thickness, which is also predicted by theoretical models. However, the measured absolute weakening of the gas flow was smaller than predicted by models. This lack of correspondence between model and experiment may be caused by an ill-determination of the boundary condition in the theoretical models, which further demonstrates the necessity of laboratory investigations. Furthermore, the impedance of the dust layer to the ice evaporation was found to be similar to the impedance at room temperature, which means that the temperature profile of the dust layer is not influencing the reduction of the gas production. Finally, we present the results of an extended investigation of the sublimation coefficient, which is an important factor for the description of the sublimation rate of water ice and, thus, an important value for thermophysical modeling of icy bodies in the solar system.

The gas transport through non-volatile random porous media is investigated numerically. We extend our previous research of the transport of molecules inside the uppermost layer of a cometary surface (Skorov and Rickmann, 1995; Skorov et al. 2001). We assess the validity of the simplified capillary model and its assumptions to simulate the gas flux trough the porous dust mantle as it has been applied in cometary physics. A new microphysical computational model for molecular transport in random porous media formed by packed spheres is presented. The main transport characteristics such as the mean free path distribution and the permeability are calculated for a wide range of model parameters and compared with those obtained by more idealized models. The focus in this comparison is on limitations inherent in the capillary model. Finally a practical way is suggested to adjust the algebraic Clausing formula taking into consideration the nonlinear dependence of permeability on layer porosity. The retrieved dependence allows us to accurately calculate the permeability of layers whose thickness and porosity vary in the range of values expected for the near-surface regions of a cometary nucleus.