Double-Fourier interferometry is the most viable path to sub-arcsecond spatial resolution for future astronomical instruments that will observe the universe at far-infrared wavelengths. The double transform spatio-spectral interferometry couples pupil plane beam combination with detector arrays to enable imaging spectroscopy of wide fields, that will be key to accomplishing top-level science goals. The wide field of view and the necessity for these instruments to fly above the opaque atmosphere create unique characteristics and requirements compared to instruments on ground-based telescopes. In this paper, we discuss some characteristics of single-baseline spatio-spectral interferometers. We investigate the impact of intensity and optical path difference noise on the interferogram and the spectral signal-to-noise ratio. We apply our findings to the special case of the Balloon Experimental Twin Telescope for Infrared Interferometry (BETTII), a balloon payload that will be a first application of this technique at far-infrared wavelengths on a flying platform.

The Optical Properties of Astronomical Silicates with Infrared Techniques (OPASI-T) program utilizes multiple instruments to provide spectral data over a wide range of temperature and wavelengths. Experimental methods include Vector Network Analyzer (VNA) and Fourier Transform Spectroscopy (FTS) transmission, and reflection/scattering measurements. From this data, we can determine the optical parameters for the index of refraction, \textit{n}, and the absorption coefficient, \textit{k}. The analysis of the laboratory transmittance data for each sample type is based upon different mathematical models, which are applied to each data set according to their degree of coherence. Presented here are results from iron silicate dust grain analogs, in several sample preparations and at temperatures ranging from 5--300 K, across the infrared and millimeter portion of the spectrum (from 2.5--10,000 \mic\ or 4,000--1 \wvn).

LISA will use quadrant photoreceivers as front-end devices for the phasemeter measuring the motion of drag-free test masses in both angular orientation and separation. We have set up a laboratory testbed for the characterization of photoreceivers. Some of the limiting noise sources have been identified and their contribution has been either measured or derived from the measured data. We have built a photoreceiver with a 0.5 mm diameter quadrant photodiode with an equivalent input current noise of better than 1.8 pA/sqrt[Hz] below 20 MHz and a 3dB bandwidth of 34 MHz.

How did the universe evolve? The fine angular scale (l>1000) temperature and polarization anisotropies in the CMB are a Rosetta stone for understanding the evolution of the universe. Through detailed measurements one may address everything from the physics of the birth of the universe to the history of star formation and the process by which galaxies formed. One may in addition track the evolution of the dark energy and discover the net neutrino mass. We are at the dawn of a new era in which hundreds of square degrees of sky can be mapped with arcminute resolution and sensitivities measured in microKelvin. Acquiring these data requires the use of special purpose telescopes such as the Atacama Cosmology Telescope (ACT), located in Chile, and the South Pole Telescope (SPT). These new telescopes are outfitted with a new generation of custom mm-wave kilo-pixel arrays. Additional instruments are in the planning stages.

By providing sensitive sub-arcsecond images and integral field spectroscopy in the 25 - 400 micron wavelength range, a far-IR interferometer will revolutionize our understanding of planetary system formation, reveal otherwise-undetectable planets through the disk perturbations they induce, and spectroscopically probe the atmospheres of extrasolar giant planets in orbits typical of most of the planets in our solar system. The technical challenges associated with interferometry in the far-IR are greatly relaxed relative to those encountered at shorter wavelengths or when starlight nulling is required. A structurally connected far-IR interferometer with a maximum baseline length of 36 m can resolve the interesting spatial structures in nascent and developed exoplanetary systems and measure exozodiacal emission at a sensitivity level critical to TPF-I mission planning. The Space Infrared Interferometric Telescope was recommended in the Community Plan for Far-IR/Submillimeter Space Astronomy, studied as a Probe-class mission, and estimated to cost 800M dollars. The scientific communities in Europe, Japan, and Canada have also demonstrated a keen interest in far-IR interferometry through mission planning workshops and technology research, suggesting the possibility of an international collaborative effort.

We report results of a recently-completed pre-Formulation Phase study of SPIRIT, a candidate NASA Origins Probe mission. SPIRIT is a spatial and spectral interferometer with an operating wavelength range 25 - 400 microns. SPIRIT will provide sub-arcsecond resolution images and spectra with resolution R = 3000 in a 1 arcmin field of view to accomplish three primary scientific objectives: (1) Learn how planetary systems form from protostellar disks, and how they acquire their inhomogeneous composition; (2) characterize the family of extrasolar planetary systems by imaging the structure in debris disks to understand how and where planets of different types form; and (3) learn how high-redshift galaxies formed and merged to form the present-day population of galaxies. Observations with SPIRIT will be complementary to those of the James Webb Space Telescope and the ground-based Atacama Large Millimeter Array. All three observatories could be operational contemporaneously.

We have imaged a $\sim$6 arcminute$^2$ region in the Bo\"otes Deep Field using the 350 $\mu$m-optimised second generation Submillimeter High Angular Resolution Camera (SHARC II), achieving a peak 1$\sigma$ sensitivity of $\sim$5 mJy. We detect three sources above 3$\sigma$, and determine a spurious source detection rate of 1.09 in our maps. In the absence of $5\sigma$ detections, we rely on deep 24 $\mu$m and 20 cm imaging to deduce which sources are most likely to be genuine, giving two real sources. From this we derive an integral source count of 0.84$^{+1.39}_{-0.61}$ sources arcmin$^{-2}$ at $S>13$ mJy, which is consistent with 350 $\mu$m source count models that have an IR-luminous galaxy population evolving with redshift. We use these constraints to consider the future for ground-based short-submillimetre surveys.

Frequency Selective Bolometers (FSBs) are a new type of detector for millimeter and sub-millimeter wavelengths that are transparent to all but a narrow range of frequencies as set by characteristics of the absorber itself. Therefore, stacks of FSBs tuned to different frequencies provide a low-loss compact method for utilizing a large fraction of the light collected by a telescope. Tests of prototype FSBs, described here, indicate that the absorption spectra are well predicted by models, that peak absolute absorption efficiencies of order 50% are attainable, and that their out-of-band transmission is high.

We present measurements of the integrated flux relative to the local background of the Large and Small Magellanic Clouds and the region 30-Doradus (the Tarantula Nebula) in the LMC in four frequency bands centered at 245, 400, 460, and 630 GHz, based on observations made with the TopHat telescope. We combine these observations with the corresponding measurements for the DIRBE bands 8, 9, and 10 to cover the frequency range 245 - 3000 GHz (100 - 1220 micrometers) for these objects. We present spectra for all three objects and fit these spectra to a single-component greybody emission model and report best-fit dust temperatures, optical depths, and emissivity power-law indices, and we compare these results with other measurements in these regions and elsewhere. Using published dust grain opacities, we estimate the mass of the measured dust component in the three regions.

To understand the cosmic history of element synthesis it will be important to obtain extinction-free measures of the heavy element contents of high-redshift objects and to chart two monumental events: the collapse of the first metal-free clouds to form stars, and the initial seeding of the universe with dust. The information needed to achieve these objectives is uniquely available in the far-infrared/submillimeter (FIR/SMM) spectral region. Following the Decadal Report and anticipating the development of the Single Aperture Far-IR (SAFIR) telescope and FIR/SMM interferometry, we estimate the measurement capabilities of a large-aperture, background-limited FIR/SMM observatory and an interferometer on a boom, and discuss how such instruments could be used to measure the element synthesis history of the universe.

The question "How did we get here and what will the future bring?" captures the human imagination and the attention of the National Academy of Science's Astronomy and Astrophysics Survey Commitee (AASC). Fulfillment of this "fundamental goal" requires astronomers to have sensitive, high angular and spectral resolution observations in the far-infrared/submillimeter (far-IR/sub-mm) spectral region. With half the luminosity of the universe and vital information about galaxy, star and planet formation, observations in this spectral region require capabilities similar to those currently available or planned at shorter wavelengths. In this paper we summarize the scientific motivation, some mission concepts and technology requirements for far-IR/sub-mm space interferometers that can be developed in the 2010-2020 timeframe.

We present new cosmic microwave background (CMB) anisotropy results from the combined analysis of the three flights of the first Medium Scale Anisotropy Measurement (MSAM1). This balloon-borne bolometric instrument measured about 10 square degrees of sky at half-degree resolution in 4 frequency bands from 5.2 icm to 20 icm with a high signal-to-noise ratio. Here we present an overview of our analysis methods, compare the results from the three flights, derive new constraints on the CMB power spectrum from the combined data and reduce the data to total-power Wiener-filtered maps of the CMB. A key feature of this new analysis is a determination of the amplitude of CMB fluctuations at $\ell \sim 400$. The analysis technique is described in a companion paper by Knox.

The COBE Diffuse Infrared Background Experiment (DIRBE) was designed to search for the cosmic infrared background (CIB) radiation. Scattered light and thermal emission from the interplanetary dust (IPD) are major contributors to the diffuse sky brightness at most infrared wavelengths. Accurate removal of this zodiacal light foreground is a necessary step toward a direct measurement of the CIB. The zodiacal light foreground contribution in each of the 10 DIRBE wavelength bands ranging from 1.25 to 240 microns is distinguished by its apparent seasonal variation over the whole sky. This contribution has been extracted by fitting the brightness calculated from a parameterized physical model to the time variation of the all-sky DIRBE measurements over 10 months of observations. The model brightness is evaluated as the integral along the line of sight of the product of a source function and a three-dimensional dust density distribution function. The dust density distribution is composed of multiple components: a smooth cloud, three asteroidal dust bands, and a circumsolar ring near 1 A.U. By using a directly measurable quantity which relates only to the IPD cloud, we exclude other contributors to the sky brightness from the IPD model. Using the IPD model described here, high-quality maps of the infrared sky with the zodiacal foreground removed have been generated. Imperfections in the model reveal themselves as low-level systematic artifacts in the residual maps which correlate with components of the IPD. The most evident of these artifacts are located near the ecliptic plane in the mid-infrared, and are less than 2% of the zodiacal foreground brightness. Uncertainties associated with the model are discussed, including implications for the CIB search.

The DIRBE on the COBE spacecraft was designed primarily to conduct systematic search for an isotropic CIB in ten photometric bands from 1.25 to 240 microns. The results of that search are presented here. Conservative limits on the CIB are obtained from the minimum observed brightness in all-sky maps at each wavelength, with the faintest limits in the DIRBE spectral range being at 3.5 microns (\nu I_\nu < 64 nW/m^2/sr, 95% CL) and at 240 microns (\nu I_\nu < 28 nW/m^2/sr, 95% CL). The bright foregrounds from interplanetary dust scattering and emission, stars, and interstellar dust emission are the principal impediments to the DIRBE measurements of the CIB. These foregrounds have been modeled and removed from the sky maps. Assessment of the random and systematic uncertainties in the residuals and tests for isotropy show that only the 140 and 240 microns data provide candidate detections of the CIB. The residuals and their uncertainties provide CIB upper limits more restrictive than the dark sky limits at wavelengths from 1.25 to 100 microns. No plausible solar system or Galactic source of the observed 140 and 240 microns residuals can be identified, leading to the conclusion that the CIB has been detected at levels of \nu I_\nu = 25+-7 and 14+-3 nW/m^2/sr at 140 and 240 microns respectively. The integrated energy from 140 to 240 microns, 10.3 nW/m^2/sr, is about twice the integrated optical light from the galaxies in the Hubble Deep Field, suggesting that star formation might have been heavily enshrouded by dust at high redshift. The detections and upper limits reported here provide new constraints on models of the history of energy-releasing processes and dust production since the decoupling of the cosmic microwave background from matter.

The Cosmic Infrared Background (CIB) is hidden behind veils of foreground emission from our own solar system and Galaxy. This paper describes procedures for removing the Galactic IR emission from the 1.25 - 240 micron COBE DIRBE maps as steps toward the ultimate goal of detecting the CIB. The Galactic emission models are carefully chosen and constructed so that the isotropic CIB is completely retained in the residual sky maps. We start with DIRBE data from which the scattered light and thermal emission of the interplanetary dust (IPD) cloud have already been removed. Locations affected by the emission from bright compact and stellar sources are excluded from the analysis. The unresolved emission of faint stars at near- and mid-IR wavelengths is represented by a model based on Galactic source counts. The 100 micron DIRBE observations are used as the spatial template for the interstellar medium (ISM) emission at high latitudes. Correlation of the 100 micron data with H I column density allows us to isolate the component of the observed emission that is associated with the ISM. Limits are established on the far-IR emissivity of the diffuse ionized medium, which indicate a lower emissivity per H nucleus than in the neutral medium. At 240 micron, we find that adding a second spatial template to the ISM model can greatly improve the accuracy of the model at low latitudes. The crucial product of this analysis is a set of all-sky IR maps from which the Galactic (and IPD) emission has been removed. We discuss systematic uncertainties and potential errors in the foreground subtraction process that may have an impact on studies seeking to detect the CIB in the residual maps.

In this paper we examine the cosmological constraints of the recent DIRBE and FIRAS detection of the extragalactic background light between 125-5000 microns on the metal and star formation histories of the universe.

The third flight of the Medium Scale Anisotropy Measurement (MSAM1), in June 1995, observed a new strip of sky, doubling the sky coverage of the original MSAM1 dataset. MSAM1 observes with a 0.5 deg beam size in four bands from 5-20 icm. From these four bands we derive measurements of cosmic microwave background radiation (CMBR) anisotropy and interstellar dust emission. Our measurement of dust emission correlates well with the 100 um IRAS Sky Survey Atlas; from this comparison we determine an effective emissivity spectral index between 100 um and 444 um of 1.46 +/- 0.28. Analysis of our measurement of CMBR anisotropy shows that for Gaussian-shaped correlation functions with theta_c = 0.3 deg, we place a limit on total rms anisotropy of 2.2 x 10^{-5} < Delta T/T < 3.9 x 10^{-5} (90% confidence interval, including calibration error). The band-power limits are <delta T> = <l (l+1)C_l/2 pi>^{1/2} = 50^{+16}_{-11} uK at l = 160, and <delta T> = 65^{+18}_{-13} uK at l = 270 (1 sigma limits, including calibration error). The corresponding limits with statistical errors only are <delta T> = 50^{+13}_{-9} uK and <delta T> = 65^{+14}_{-10} uK respectively. These measurements are consistent with a standard adiabatic cold dark matter model; we discuss constraints on h, n, and the redshift of reionization.

We compare the independent FIRAS and DIRBE observations from the COBE in the wavelength range 100-300 microns. This cross calibration provides checks of both data sets. The results show that the data sets are consistent within the estimated gain and offset uncertainties of the two instruments. They show the possibility of improving the gain and offset determination of DIRBE at 140 and 240 microns.

Whole disk brightness ratios for Jupiter, Saturn, and Mars are reported at 5.7, 9.5, 16.4, and 22.5 cm$^{-1}$. Using models for the brightness temperature of Mars, the whole disk brightness temperatures for Jupiter and Saturn are also given for the four frequencies.

Observations from the first flight of the Medium Scale Anisotropy Measurement (MSAM1-92) are analyzed to search for the Sunyaev-Zel'dovich (SZ) effect towards the Coma cluster. This balloon-borne instrument uses a $28\arcmin$ FWHM beam and a three position chopping pattern with a throw of $\pm40\arcmin$. With spectral channels at 5.7, 9.3, 16.5, and 22.6~\icm, the observations simultaneously sample the frequency range where the SZ spectral distortion in the intensity transitions from a decrement to an increment and where the fractional intensity change is substantially larger than in the Rayleigh-Jeans region. We set limits on the Comptonization parameter integrated over our antenna pattern, $\Delta y \leq 8.0 \times 10^{-5}$($2 \sigma$). For a spherically symmetric isothermal model, this implies a central Comptonization parameter, $y_o \leq 2.0 \times 10^{-4}$, or a central electron density, $n_o \leq 5.8 \times10^{-3}$cm$^{-3}h_{50}$, a result consistent with central densities implied by X-ray brightness measurements and central Comptonization estimates from lower frequency observations of the SZ effect.

We report the characterization of bright, compact features in the cosmic microwave background radiation (CMBR) detected during the June 1992 and June 1994 balloon flights of the Medium Scale Anisotropy Measurement (MSAM1-92 and MSAM1-94, respectively). Spectral flux densities are determined for each feature at 5.7, 9.3, and 16.5 cm$^{-1}$. No viable counterparts for these features were found in source catalogs at 5 GHz or at 100 $\mu$m. The measured spectrum of each feature is consistent with a temperature fluctuation in the CMBR. The existence of these features is consistent with adiabatic fluctuation models of anisotropy in the CMBR.

The goal of the second flight of the Medium Scale Anisotropy Measurement (MSAM1-94) was to confirm the measurement of cosmic microwave background radiation (CMBR) anisotropy made in the first flight (MSAM1-92). The CMBR anisotropy and interstellar dust emission signals from the two flights are compared by forming the sum and difference of those portions of the data with the same pointings on the sky. The difference data are consistent with a null detection, while the summed data show significant signal. We conclude that MSAM1-92 and MSAM1-94 measured the same celestial signal.

We report on the characteristics and design details of the Medium Scale Anisotropy Measurement (MSAM), a millimeter-wave, balloon-borne telescope that has been used to observe anisotropy in the Cosmic Microwave Background Radiation (CMBR) on 0\fdg5 angular scales. The gondola is capable of determining and maintaining absolute orientation to a few arcminutes during a one-night flight. Emphasis is placed on the optical and pointing performance as well as the weight and power budgets. We also discuss the total balloon/gondola mechanical system. The pendulation from this system is a ubiquitous perturbation on the pointing system. A detailed understanding in these areas is needed for developing the next generation of balloon-borne instruments.

The second flight of the Medium Scale Anisotropy Measurement (MSAM1-94) observed the same field as the first flight (MSAM1-92) to confirm our earlier measurement of cosmic microwave background radiation (CMBR) anisotropy. This instrument chops a 30\arcmin\ beam in a 3 position pattern with a throw of $\pm40\arcmin$, and simultaneously measures single and double differenced sky signals. We observe in four spectral channels centered at 5.6, 9.0, 16.5, and 22.5~\icm, providing sensitivity to the peak of the CMBR and to thermal emission from interstellar dust. The dust component correlates well with the \IRAS\ 100~\micron\ map. The CMBR observations in our double difference channel correlate well with the earlier observations, but the single difference channel shows some discrepancies. We obtain a detection of fluctuations in the MSAM1-94 dataset that match CMBR in our spectral bands of $\Delta T/T = 1.9^{+1.3}_{-0.7}\times 10^{-5}$ (90\% confidence interval, including calibration uncertainty) for total rms Gaussian fluctuations with correlation angle 0\fdg3, using the double difference demodulation.

Observations from the first flight of the Medium Scale Anisotropy Measurement (MSAM) are analyzed to place limits on Gaussian fluctuations in the Cosmic Microwave Background Radiation (CMBR). This instrument chops a 30\arcmin\ beam in a 3 position pattern with a throw of $\pm40\arcmin$; the resulting data is analyzed in statistically independent single and double difference datasets. We observe in four spectral channels at 5.6, 9.0, 16.5, and 22.5~\icm, allowing the separation of interstellar dust emission from CMBR fluctuations. The dust component is correlated with the \IRAS\ 100~\micron\ map. The CMBR component has two regions where the signature of an unresolved source is seen. Rejecting these two source regions, we obtain a detection of fluctuations which match CMBR in our spectral bands of $0.6 \times 10^{-5} < \Delta T/T < 2.2 \times 10^{-5}$ (90\% CL interval) for total rms Gaussian fluctuations with correlation angle 0\fdg5, using the single difference demodulation. For the double difference demodulation, the result is $1.1 \times 10^{-5} < \Delta T/T < 3.1 \times 10^{-5}$ (90\% CL interval) at a correlation angle of 0\fdg3.