The carbon monoxide (CO) rotational transition lines are the most common tracers of molecular gas within giant molecular clouds (MCs). We study the ratio ($R_{2-1/1-0}$) between CO's first two emission lines and examine what information it provides about the physical properties of the cloud. To study $R_{2-1/1-0}$ we perform smooth particle hydrodynamic simulations with time dependent chemistry (using GADGET-2), along with post-process radiative transfer calculations on an adaptive grid (using RADMC-3D) to create synthetic emission maps of a MC. $R_{2-1/1-0}$ has a bimodal distribution that is a consequence of the excitation properties of each line, given that $J=1$ reaches local thermal equilibrium (LTE) while $J=2$ is still sub-thermally excited in the considered clouds. The bimodality of $R_{2-1/1-0}$ serves as a tracer of the physical properties of different regions of the cloud and it helps constrain local temperatures, densities and opacities. Additionally this bimodal structure shows an important portion of the CO emission comes from diffuse regions of the cloud, suggesting that the commonly used conversion factor of $R_{2-1/1-0}\sim 0.7$ between both lines may need to be studied further.

We present a method to simultaneously model the dust far-infrared spectral energy distribution (SED) and the total infrared $-$ carbon monoxide (CO) integrated intensity $(S_{\rm IR}-I_{\rm CO})$ relationship. The modelling employs a hierarchical Bayesian (HB) technique to estimate the dust surface density, temperature ($T_{\rm eff}$), and spectral index at each pixel from the observed far-infrared (FIR) maps. Additionally, given the corresponding CO map, the method simultaneously estimates the slope and intercept between the FIR and CO intensities, which are global properties of the observed source. The model accounts for correlated and uncorrelated uncertainties, such as those present in Herschel observations. Using synthetic datasets, we demonstrate the accuracy of the HB method, and contrast the results with common non-hierarchical fitting methods. As an initial application, we model the dust and gas on 100 pc scales in the Magellanic Clouds from Herschel FIR and NANTEN CO observations. The slopes of the $\log S_{\rm IR}-\log I_{\rm CO}$ relationship are similar in both galaxies, falling in the range 1.1$-$1.7. However, in the SMC the intercept is nearly 3 times higher, which can be explained by its lower metallicity than the LMC, resulting in a larger $S_{\rm IR}$ per unit $I_{\rm CO}$. The HB modelling evidences an increase in $T_{\rm eff}$ in regions with the highest $I_{\rm CO}$ in the LMC. This may be due to enhanced dust heating in the densest molecular regions from young stars. Such simultaneous dust and gas modelling may reveal variations in the properties of the ISM and its association with other galactic characteristics, such as star formation rates and/or metallicities.

Emission from carbon monoxide (CO) is ubiquitously used as a tracer of dense star forming molecular clouds. There is, however, growing evidence that a significant fraction of CO emission originates from diffuse molecular gas. Quantifying the contribution of diffuse CO-emitting gas is vital for understanding the relation between molecular gas and star formation. We examine the Galactic distribution of two CO-emitting gas components, a high column density component detected in 13CO and 12CO, and a low column density component detected in 12CO, but not in 13CO. The "diffuse" and "dense" components are identified using a combination of smoothing, masking, and erosion/dilation procedures, making use of three large-scale 12CO and 13CO surveys of the Inner and Outer Milky Way. The diffuse component, which globally represents 25 (1.5x1e8 Mo) of the total molecular gas mass (6.5x1e8 Mo), is more extended perpendicular to the Galactic plane. The fraction of diffuse gas increases from 15% at a galactocentric radius of 3 kpc to 50% at 15 kpc, and increases with decreasing surface density. In the Inner Galaxy, a yet denser component traced by CS emission represents 14% of the total molecular gas mass traced by 12CO emission. Only 14% of the molecular gas mass traced by 12CO emission is identified as part of molecular clouds in 12CO surveys by cloud identification algorithms. This study indicates that CO emission not only traces star forming clouds, but also a significant diffuse molecular ISM component.

We model driven, compressible, isothermal, turbulence with Mach numbers ranging from the subsonic ($\mathcal{M} \approx 0.65$) to the highly supersonic regime ($\mathcal{M}\approx 16 $). The forcing scheme consists both solenoidal (transverse) and compressive (longitudinal) modes in equal parts. We find a relation $\sigma_{s}^2 = \mathrm{b}\log{(1+\mathrm{b}^2\mathcal{M}^2)}$ between the Mach number and the standard deviation of the logarithmic density with $\mathrm{b} = 0.457 \pm 0.007$. The density spectra follow $\mathcal{D}(k,\,\mathcal{M}) \propto k^{\zeta(\mathcal{M})}$ with scaling exponents depending on the Mach number. We find $\zeta(\mathcal{M}) = \alpha \mathcal{M}^{\beta}$ with a coefficient $\alpha$ that varies slightly with resolution, whereas $\beta$ changes systematically. We extrapolate to the limit of infinite resolution and find $\alpha = -1.91 \pm 0.01,\, \beta =-0.30\pm 0.03$. The dependence of the scaling exponent on the Mach number implies a fractal dimension $D=2+0.96 \mathcal{M}^{-0.30}$. We determine how the scaling parameters depend on the wavenumber and find that the density spectra are slightly curved. This curvature gets more pronounced with increasing Mach number. We propose a physically motivated fitting formula $\mathcal{D}(k) = \mathcal{D}_0 k^{\zeta k^{\eta}}$ by using simple scaling arguments. The fit reproduces the spectral behaviour down to scales $k\approx 80$. The density spectrum follows a single power-law $\eta = -0.005 \pm 0.01$ in the low Mach number regime and the strongest curvature $\eta = -0.04 \pm 0.02$ for the highest Mach number. These values of $\eta$ represent a lower limit, as the curvature increases with resolution.

We present an analysis of probability distribution functions (pdfs) of column density in different zones of the star-forming region Perseus and its diffuse environment based on the map of dust opacity at 353 GHz available from the Planck archive. The pdf shape can be fitted by a combination of a lognormal function and an extended power-law tail at high densities, in zones centred at the molecular cloud Perseus. A linear combination of several lognormals fits very well the pdf in rings surrounding the cloud or in zones of its diffuse neighbourhood. The slope of the mean density scaling law $\langle\rho\rangle_L \propto L^\alpha$ is steep ($\alpha=-1.93$) in the former case and rather shallow ($\alpha=-0.77\pm0.11$) in the rings delineated around the cloud. We interpret these findings as signatures of two distinct physical regimes: i) a gravoturbulent one which is characterized by nearly linear scaling of mass and practical lack of velocity scaling; and ii) a predominantly turbulent one which is best described by steep velocity scaling and by invariant for compressible turbulence $\langle\rho\rangle_L u_L^3/L$, describing a scale-independent flux of the kinetic energy per unit volume through turbulent cascade. The gravoturbulent spatial domain can be identified with the molecular cloud Perseus while a relatively sharp transition to predominantly turbulent regime occurs in its vicinity.

Turbulence is a dominant feature operating in gaseous flows across nearly all scales in astrophysical environments. Accordingly, accurately estimating the statistical properties of such flows is necessary for developing a comprehensive understanding of turbulence. We develop and employ a hierarchical Bayesian fitting method to estimate the parameters describing the scaling relationships of the velocity power spectra of supersonic turbulence. We demonstrate the accuracy and other advantages of this technique compared with ordinary linear regression methods. Using synthetic power spectra, we show that the Bayesian method provides accurate parameter and error estimates. Commonly used normal linear regression methods can provide estimates that fail to recover the underlying slopes, up to 70% of the instances, even when considering the 2std.dev. uncertainties. Additionally, we apply the Bayesian methods to analyse the statistical properties of compressible turbulence in 3D numerical simulations. We model driven, isothermal, turbulence with rms Mach numbers in the highly supersonic regime M~15. We study the influence of purely solenoidal (divergence-free) and purely compressive (curl-free) forcing on the scaling exponent of the power spectrum. In simulations with solenoidal forcing and 1024^3 resolution, our results indicate that there is no extended inertial range with a constant scaling exponent. The bottleneck effect results in a curved power spectrum at all wave numbers and is more pronounced in the transversal modes compared with the longitudinal modes. Therefore, this effect is stronger in stationary turbulent flows driven by solenoidal forcing compared to the compressive one. The longitudinal spectrum driven with compressive forcing is the only spectrum with constant scaling exponent z=-1.94 +- 0.01, corresponding to slightly shallower slopes than the Burger's prediction.

We compute structure functions and Fourier spectra of 2D centroid velocity (CV) maps in order to study the gas dynamics of typical molecular clouds (MCs) in numerical simulations. We account for a simplified treatment of time-dependent chemistry and the non-isothermal nature of the gas and use a 3D radiative transfer tool to model the CO line emission in a post-processing step. We perform simulations using three different initial mean number densities of n_0 = 30, 100 and 300 cm^{-3} to span a range of typical values for dense gas clouds in the solar neighbourhood. We compute slopes of the centroid velocity increment structure functions (CVISF) and of Fourier spectra for different chemical components: the total density, H2 number density, 12CO number density as well as the integrated intensity of 12CO (J=1-0) and 13CO (J=1-0). We show that optical depth effects can significantly affect the slopes derived for the CVISF, which also leads to different scaling properties for the Fourier spectra. The slopes of CVISF and Fourier spectra for H2 are significantly steeper than those for the different CO tracers, independent of the density and the numerical resolution. This is due to the larger space-filling factor of H2 as it is better able to self-shield in diffuse regions, leading to a larger fractal co-dimension compared to CO.

Recent observational and theoretical investigations have emphasised the importance of filamentary networks within molecular clouds as sites of star formation. Since such environments are more complex than those of isolated cores, it is essential to understand how the observed line profiles from collapsing cores with non-spherical geometry are affected by filaments. In this study, we investigate line profile asymmetries by performing radiative transfer calculations on hydrodynamic models of three collapsing cores that are embedded in filaments. We compare the results to those that are expected for isolated cores. We model the five lowest rotational transition line (J = 1-0, 2-1, 3-2, 4-3, and 5-4) of both optically thick (HCN, HCO$^+$) as well as optically thin (N$_2$H$^+$, H$^{13}$CO$^+$) molecules using constant abundance laws. We find that less than 50% of simulated (1-0) transition lines show blue infall asymmetries due to obscuration by the surrounding filament. However, the fraction of collapsing cores that have a blue asymmetric emission line profile rises to 90% when observed in the (4-3) transition. Since the densest gas towards the collapsing core can excite higher rotational states, upper level transitions are more likely to produce blue asymmetric emission profiles. We conclude that even in irregular, embedded cores one can trace infalling gas motions with blue asymmetric line profiles of optically thick lines by observing higher transitions. The best tracer of collapse motions of our sample is the (4-3) transition of HCN, but the (3-2) and (5-4) transitions of both HCN and HCO$^+$ are also good tracers.

Recent statistical analysis of two extragalactic observational surveys strongly indicate a sublinear Kennicutt-Schmidt (KS) relationship between the star formation rate (Sigsfr) and molecular gas surface density (Sigmol). Here, we consider the consequences of these results in the context of common assumptions, as well as observational support for a linear relationship between Sigsfr and the surface density of dense gas. If the CO traced gas depletion time (tau_mol) is constant, and if CO only traces star forming giant molecular clouds (GMCs), then the physical properties of each GMC must vary, such as the volume densities or star formation rates. Another possibility is that the conversion between CO luminosity and Sigmol, the XCO factor, differs from cloud-to-cloud. A more straightforward explanation is that CO permeates the hierarchical ISM, including the filaments and lower density regions within which GMCs are embedded. A number of independent observational results support this description, with the diffuse gas comprising at least 30% of the total molecular content. The CO bright diffuse gas can explain the sublinear KS relationship, and consequently leads to an increasing tau_mol with Sigmol. If Sigsfr linearly correlates with the dense gas surface density, a sublinear KS relationship indicates that the fraction of diffuse gas fdiff grows with Sigmol. In galaxies where Sigmol falls towards the outer disk, this description suggests that fdiff also decreases radially.

We use Principal Component Analysis (PCA) to study the gas dynamics in numerical simulations of typical MCs. Our simulations account for the non-isothermal nature of the gas and include a simplified treatment of the time-dependent gas chemistry. We model the CO line emission in a post-processing step using a 3D radiative transfer code. We consider mean number densities n_0 = 30, 100, 300 cm^{-3} that span the range of values typical for MCs in the solar neighbourhood and investigate the slope \alpha_{PCA} of the pseudo structure function computed by PCA for several components: the total density, H2 density, 12CO density, 12CO J = 1 -> 0 intensity and 13CO J = 1 -> 0 intensity. We estimate power-law indices \alpha_{PCA} for different chemical species that range from 0.5 to 0.9, in good agreement with observations, and demonstrate that optical depth effects can influence the PCA. We show that when the PCA succeeds, the combination of chemical inhomogeneity and radiative transfer effects can influence the observed PCA slopes by as much as ~ +/- 0.1. The method can fail if the CO distribution is very intermittent, e.g. in low-density clouds where CO is confined to small fragments.

We derive the CO-to-H2 conversion factor, X_CO = N(H2)/I_CO, across the Perseus molecular cloud on sub-parsec scales by combining the dust-based N(H2) data with the I_CO data from the COMPLETE Survey. We estimate an average X_CO ~ 3 x 10^19 cm^-2 K^-1 km^-1 s and find a factor of ~3 variations in X_CO between the five sub-regions in Perseus. Within the individual regions, X_CO varies by a factor of ~100, suggesting that X_CO strongly depends on local conditions in the interstellar medium. We find that X_CO sharply decreases at Av < 3 mag but gradually increases at Av > 3 mag, with the transition occurring at Av where I_CO becomes optically thick. We compare the N(HI), N(H2), I_CO, and X_CO distributions with two models of the formation of molecular gas, a one-dimensional photodissociation region (PDR) model and a three-dimensional magnetohydrodynamic (MHD) model tracking both the dynamical and chemical evolution of gas. The PDR model based on the steady state and equilibrium chemistry reproduces our data very well but requires a diffuse halo to match the observed N(HI) and I_CO distributions. The MHD model generally matches our data well, suggesting that time-dependent effects on H2 and CO formation are insignificant for an evolved molecular cloud like Perseus. However, we find interesting discrepancies, including a broader range of N(HI), likely underestimated I_CO, and a large scatter of I_CO at small Av. These discrepancies likely result from strong compressions/rarefactions and density fluctuations in the MHD model.

We estimate the parameters of the Kennicutt-Schmidt (KS) relationship, linking the star formation rate (Sigma_SFR) to the molecular gas surface density (Sigma_mol), in the STING sample of nearby disk galaxies using a hierarchical Bayesian method. This method rigorously treats measurement uncertainties, and provides accurate parameter estimates for both individual galaxies and the entire population. Assuming standard conversion factors to estimate Sigma_SFR and Sigma_mol from the observations, we find that the KS parameters vary between galaxies, indicating that no universal relationship holds for all galaxies. The KS slope of the whole population is 0.76, with the 2sigma range extending from 0.58 to 0.94. These results imply that the molecular gas depletion time is not constant, but varies from galaxy to galaxy, and increases with the molecular gas surface density. Therefore, other galactic properties besides just Sigma_mol affect Sigma_SFR, such as the gas fraction or stellar mass. The non-universality of the KS relationship indicates that a comprehensive theory of star formation must take into account additional physical processes that may vary from galaxy to galaxy.

The physical properties of molecular clouds are often measured using spectral-line observations, which provide the only probes of the clouds' velocity structure. It is hard, though, to assess whether and to what extent intensity features in position-position-velocity (PPV) space correspond to "real" density structures in position-position-position (PPP) space. In this paper, we create synthetic molecular cloud spectral-line maps of simulated molecular clouds, and present a new technique for measuring the reality of individual PPV structures. Our procedure projects density structures identified in PPP space into corresponding intensity structures in PPV space and then measures the geometric overlap of the projected structures with structures identified from the synthetic observation. The fractional overlap between a PPP and PPV structure quantifies how well the synthetic observation recovers information about the 3D structure. Applying this machinery to a set of synthetic observations of CO isotopes, we measure how well spectral-line measurements recover mass, size, velocity dispersion, and virial parameter for a simulated star-forming region. By disabling various steps of our analysis, we investigate how much opacity, chemistry, and gravity affect measurements of physical properties extracted from PPV cubes. For the simulations used here, our results suggest that superposition induces a ~40% uncertainty in masses, sizes, and velocity dispersions derived from 13CO. The virial parameter is most affected by superposition, such that estimates of the virial parameter derived from PPV and PPP information typically disagree by a factor of ~2. This uncertainty makes it particularly difficult to judge whether gravitational or kinetic energy dominate a given region, since the majority of virial parameter measurements fall within a factor of 2 of the equipartition level alpha ~ 2.

Volume and column density PDFs in molecular clouds are important diagnostics for understanding their general structure. We developed a novel approach to trace the cloud structure by varying the lower PDF cut-off and exploring a suggested mass-density relationship with a power-law index $x^\prime$. The correspondence of x' as a function of spatial scale to the slope of the high-density PDF tail is studied. To validate the proposed model, we use results from hydrodynamical simulations of a turbulent self-gravitating cloud and recent data on dust continuum emission from the Planck mission.

Observations of atomic or molecular lines can provide important information about the physical state of star forming regions. In order to investigate the line profiles from dynamical collapsing massive star forming regions (MSFRs), we model the emission from hydrodynamic simulations of a collapsing cloud in the absence of outflows. By performing radiative transfer calculations, we compute the optically thick HCO+ and optically thin N2H+ line profiles from two collapsing regions at different epochs. Due to large-scale collapse, the MSFRs have large velocity gradients, reaching up to 20 km/s/pc across the central core. The optically thin lines typically contain multiple velocity components resulting from the superposition of numerous density peaks along the line-of-sight. The optically thick lines are only marginally shifted to the blue side of the optically thin line profiles, and frequently do not have a central depression in their profiles due to self-absorption. As the regions evolve the lines become brighter and the optically thick lines become broader. The lower order HCO+ (1-0) transitions are better indicators of collapse than the higher order (4-3) transitions. We also investigate how the beam sizes affect profile shapes. Smaller beams lead to brighter and narrower lines that are more skewed to the blue in HCO+ relative to the true core velocity, but show multiple components in N2H+. High resolution observations (e.g. with ALMA) can test these predictions and provide insights into the nature of MSFRs.

We present a series of smoothed particle hydrodynamical models of G0.253+0.016 (also known as 'The Brick'), a very dense molecular cloud that lies close to the Galactic Centre. We explore how its gas and dust temperatures react as we vary the strength of both the interstellar radiation field (ISRF) and the cosmic ray ionisation rate (CRIR). As the physical extent of G0.253+0.016 along our line-of-sight is unknown, we consider two possibilities: one in which the longest axis is that measured in the plane of the sky (9.4 pc in length), and one in which it is along the line of sight, in which case we take it to be 17 pc. To recover the observed gas and dust temperatures, we find find that the ISRF must be around 1000 times the solar neighbourhood value, and the CRIR must be roughly 1E-14 /s, regardless of the geometries studied. For such high values of the CRIR, we find that cooling in the cloud's interior is dominated by neutral oxygen, in contrast to standard molecular clouds, which at the same densities are mainly cooled via CO. Our results suggest that the conditions near G0.253+0.016 are more extreme than those generally accepted for the inner 500 pc of the galaxy.

For investigating the relationship between the star formation rate and gas surface density, we develop a Bayesian linear regression method that rigorously treats measurement uncertainties and accounts for hierarchical data structure. The hierarchical method simultaneously estimates the intercept, slope, and scatter about the regression line of each individual subject and the population. Using synthetic datasets, we demonstrate that the method recovers the underlying parameters of both the individuals and the population, especially when compared to commonly employed ordinary least squares techniques, such as the bisector fit. We apply the hierarchical method to estimate the Kennicutt-Schmidt (KS) parameters of a sample of spiral galaxies compiled by Bigiel et al. (2008). We find significant variation in the KS parameters, indicating that no single relationship holds for all galaxies. This suggests that the relationship between molecular gas and star formation differs between galaxies, possibly due to the influence of other properties within a given galaxy, such as metallicity, molecular gas fraction, or stellar mass. In four galaxies the slope estimates are sub-linear (at the 95% level). We estimate the mean index of the KS relationship for the population to be 0.84, with 95% range [0.63, 1.0]. For the galaxies with sub-linear KS relationships, a possible interpretation is that CO emission is tracing some molecular gas that is not directly associated with star formation. Equivalently, a sub-linear KS relationship may be indicative of an increasing gas depletion time at higher surface densities, as traced by CO emission. The Bayesian method can account for all sources of uncertainties, including variations in the conversion of observed intensities to star formation rates and gas surface densities, and is therefore well suited for a thorough statistical analysis of the KS law.

The linewidth (sigma) - size (R) relationship has been extensively measured and analysed, in both the local ISM and in nearby normal galaxies. Generally, a power-law describes the relationship well with an index ranging from 0.2-0.6, now referred to as one of "Larson's Relationships." The nature of turbulence and star formation is considered to be intimately related to these relationships, so evaluating the sigma-R correlations in various environments is important for developing a comprehensive understanding of the ISM. We measure the sigma-R relationship in the Central Molecular Zone (CMZ) of the Galactic Centre using spectral line observations of the high density tracers N2H+, HCN, H13CN, and HCO+. We use dendrograms, which map the hierarchical nature of the position-position-velocity (PPV) data, to compute sigma and R of contiguous structures. The dispersions range from ~2-30 km/s in structures spanning sizes 2-40 pc, respectively. By performing Bayesian inference, we show that a power-law with exponent 0.3-1.1 can reasonably describe the sigma-R trend. We demonstrate that the derived sigma-R relationship is independent of the locations in the PPV dataset where sigma and R are measured. The uniformity in the sigma-R relationship suggests turbulence in the CMZ is driven on the large scales beyond >30 pc. We compare the CMZ sigma-R relationship to that measured in the Galactic molecular cloud Perseus. The exponents between the two systems are similar, suggestive of a connection between the turbulent properties within a cloud to its ambient medium. Yet, the velocity dispersion in the CMZ is systematically higher, resulting in a coefficient that is nearly five times larger. The systematic enhancement of turbulent velocities may be due to the combined effects of increased star formation activity, larger densities, and higher pressures relative to the local ISM.

We explore the self-regulation of star formation using a large suite of high resolution hydrodynamic simulations, focusing on molecule-dominated regions (galactic centers and [U]LIRGS) where feedback from star formation drives highly supersonic turbulence. In equilibrium the total midplane pressure, dominated by turbulence, must balance the vertical weight of the ISM. Under self-regulation, the momentum flux injected by feedback evolves until it matches the vertical weight. We test this flux balance in simulations spanning a range of parameters, including surface density $\Sigma$, momentum injected per stellar mass formed ($p_*/m_*$), and angular velocity. The simulations are 2D radial-vertical slices, including both self-gravity and an external potential that confines gas to the disk midplane. After the simulations reach a steady state in all relevant quantities, including the star formation rate $\Sigma_{SFR}$, there is remarkably good agreement between the vertical weight, the turbulent pressure, and the momentum injection rate from supernovae. Gas velocity dispersions and disk thicknesses increase with $p_*/m_*$. The efficiency of star formation per free-fall time at the mid-plane density is insensitive to the local conditions and to the star formation prescription in very dense gas. We measure efficiencies $\sim$0.004-0.01, consistent with low and approximately constant efficiencies inferred from observations. For $\Sigma\in$(100--1000) \msunpc, we find $\Sigma_{SFR}\in$(0.1--4) \sfrunits, generally following a $\Sigma_{SFR}\propto \Sigma^2$ relationship. The measured relationships agree very well with vertical equilibrium and with turbulent energy replenishment by feedback within a vertical crossing time. These results, along with the observed $\Sigma_{SFR}-\Sigma$ relation in high density environments, provide strong evidence for the self-regulation of star formation.

We present a hierarchical Bayesian method for fitting infrared spectral energy distributions (SEDs) of dust emission to observed fluxes. Under the standard assumption of optically thin single temperature (T) sources the dust SED as represented by a power--law modified black body is subject to a strong degeneracy between T and the spectral index beta. The traditional non-hierarchical approaches, typically based on chi-square minimization, are severely limited by this degeneracy, as it produces an artificial anti-correlation between T and beta even with modest levels of observational noise. The hierarchical Bayesian method rigorously and self-consistently treats measurement uncertainties, including calibration and noise, resulting in more precise SED fits. As a result, the Bayesian fits do not produce any spurious anti-correlations between the SED parameters due to measurement uncertainty. We demonstrate that the Bayesian method is substantially more accurate than the chi-square fit in recovering the SED parameters, as well as the correlations between them. As an illustration, we apply our method to Herschel and sub millimeter ground-based observations of the star-forming Bok globule CB244. This source is a small, nearby molecular cloud containing a single low-mass protostar and a starless core. We find that T and beta are weakly positively correlated -- in contradiction with the chi-square fits, which indicate a T-beta anti-correlation from the same data-set. Additionally, in comparison to the chi-square fits the Bayesian SED parameter estimates exhibit a reduced range in values.

Observations are revealing the ubiquity of filamentary structures in molecular clouds. As cores are often embedded in filaments, it is important to understand how line profiles from such systems differ from those of isolated cores. We perform radiative transfer calculations on a hydrodynamic simulation of a molecular cloud in order to model line emission from collapsing cores embedded in filaments. We model two optically thick lines, CS(2-1) and HCN(1-0), and one optically thin line, N2H+(1-0), from three embedded cores. In the hydrodynamic simulation, gas self-gravity, turbulence, and bulk flows create filamentary regions within which cores form. Though the filaments have large dispersions, the N2H+(1-0) lines indicate subsonic velocities within the cores. We find that the observed optically thick line profiles of CS(2-1) and HCN(1-0) vary drastically with viewing angle. In over 50% of viewing angles, there is no sign of a blue asymmetry, an idealised signature of infall motions in an isolated spherical collapsing core. Profiles which primarily trace the cores, with little contribution from the surrounding filament, are characterised by a systematically higher HCN(1-0) peak intensity. The N2H+(1-0) lines do not follow this trend. We demonstrate that red asymmetric profiles are also feasible in the optically thick lines, due to emission from the filament or one-sided accretion flows onto the core. We conclude that embedded cores may frequently undergo collapse without showing a blue asymmetric profile, and that observational surveys including filamentary regions may underestimate the number of collapsing cores if based solely on profile shapes of optically thick lines.

We investigate how the X factor, the ratio of H_2 column density (NH2) to velocity-integrated CO intensity (W), is determined by the physical properties of gas in model molecular clouds (MCs). We perform radiative transfer calculations on chemical-MHD models to compute X. Using integrated NH2 and W reproduces the limited range in X found in observations, resulting in a mean value X=2\times10^20 s/cm^2/K^1/km^1 from the Galactic MC model. However, in limited velocity intervals, X can take on a much larger range due to CO line saturation. Thus, X strongly depends on both the range in gas velocities and volume densities. The temperature (T) variations within individual MCs do not strongly affect X, as dense gas contributes most to setting X. For fixed velocity and density structure, gas with higher T has higher W, yielding X ~ T^-1/2 for T~20-100 K. We demonstrate that the linewidth-size scaling relation does not influence the X factor - only the range in velocities is important. Clouds with larger linewidths, regardless of the linewidth-size relation, have a higher W, corresponding to a lower value of X, scaling roughly as X ~ sigma^-1/2. The "mist" model, consisting of optically thick cloudlets with well-separated velocities, does not accurately reflect the conditions in a turbulent MC. We propose that the observed cloud-average values of X ~ XGal is simply a result of the limited range in NH2, temperatures, and velocities found in Galactic MCs - a ~constant value of X therefore does not require any linewidth-size relation, or that MCs are virialized objects. Since gas properties likely differ (slightly) between clouds, masses derived through a standard X should only be considered as a rough first estimate. For temperatures T~10-20 K, velocity dispersions ~1-6 km/s, and NH2~2-20\times10^21 cm^-2, we find cloud-averaged X ~ 2-4\times10^20 s/cm^2/K^1/km^1 for Solar-metallicity models.

Star formation rates in the centers of disk galaxies often vastly exceed those at larger radii. We investigate the idea that these central starbursts are self-regulated, with the momentum flux injected to the ISM by star formation balancing the gravitational force confining the gas. For most starbursts, supernovae are the largest contributor to the momentum flux, and turbulence provides the main pressure support for the predominantly-molecular ISM. If the momentum feedback per stellar mass formed is p_*/m_* ~ 3000 km/s, the predicted star formation rate is Sigma_SFR=2 pi G Sigma^2 m_*/p_* ~0.1(Sigma/100Msun/pc^2)^2 Msun/kpc^2/yr in regions where gas dominates the vertical gravity. We compare this prediction with numerical simulations of vertically-resolved disks that model star formation including feedback, finding good agreement for gas surface densities Sigma ~ 10^2-10^3 Msun/pc^2. We also compare to a compilation of star formation rates and gas contents from local and high-redshift galaxies (both mergers and normal galaxies), finding good agreement provided that X_CO decreases weakly as Sigma and Sigma_SFR increase. Star formation rates in dense, turbulent gas are also expected to depend on the gravitational free-fall time; if the efficiency per free-fall time is epsilon_ff ~ 0.01, the turbulent velocity dispersion driven by feedback is expected to be v_z = 0.4 epsilon_ff p_*/m_* ~ 10 km/s, relatively independent of Sigma or Sigma_SFR. Turbulence-regulated starbursts (controlled by kinetic momentum feedback) are part of the larger scheme of self-regulation; primarily-atomic low-Sigma outer disks may have star formation regulated by UV heating feedback, whereas regions at extremely high Sigma may be regulated by feedback of radiation that is reprocessed into trapped IR.

Theoretical and observational investigations have indicated that the abundance of carbon monoxide (CO) is very sensitive to intrinsic properties of the gaseous medium, such as density, metallicity, and the background UV field. In order to accurately interpret CO observations, it is thus important to understand how well CO traces the gas, which in molecular clouds (MCs) is predominantly molecular hydrogen (H2). Recent hydrodynamic simulations by Glover & Mac Low have explicitly followed the formation and destruction of molecules in model MCs under varying conditions, confirming that CO formation strongly depends on the cloud properties. Conversely, the H2 formation is primarily determined by the age of the MC. We apply radiative transfer calculations to these MC models in order to investigate the properties of CO line emission. We focus on integrated CO (J=1-0) intensities emerging from individual clouds, including its relationship to the total, H2, and CO column densities, as well as the "X factor," the ratio of H2 column density to CO intensity. Models with high CO abundances have a threshold CO intensity ~65 K km/s at sufficiently large extinctions. Clouds with low CO abundances show no such intensity thresholds. The distribution of H2 column densities are well described as log-normal functions, though the distributions of CO intensities and column densities are usually not log-normal. In general, the PDFs of the integrated intensity do not follow the distribution functions of CO column densities. In the model with Milky Way-like conditions, the X factor is in agreement with the near constant value determined from observations. In clouds with lower CO abundances the X factor can vary appreciably - sometimes by > 4 orders of magnitude. In models with high densities, the CO line is fully saturated, so that the X factor is directly proportional to the molecular column density.

We measure the mass and size of cloud fragments in several molecular clouds continuously over a wide range of spatial scales (0.05 < r / pc < 3). Based on the recently developed "dendrogram-technique", this characterizes dense cores as well as the enveloping clouds. "Larson's 3rd Law" of constant column density, m(r) = C*r^2, is not well suited to describe the derived mass-size data. Solar neighborhood clouds not forming massive stars (< 10 M_sun; Pipe Nebula, Taurus, Perseus, and Ophiuchus) obey m(r) < 870 M_sun (r / pc)^1.33 . In contrast to this, clouds forming massive stars (Orion A, G10.15$-$0.34, G11.11$-$0.12) do exceed the aforementioned relation. Thus, this limiting mass-size relation may approximate a threshold for the formation of massive stars. Across all clouds, cluster-forming cloud fragments are found to be---at given radius---more massive than fragments devoid of clusters. The cluster-bearing fragments are found to roughly obey a mass-size law m = C*r^1.27 (where the exponent is highly uncertain in any given cloud, but is certainly smaller than 1.5).

Power law mass-size and linewidth-size correlations, two of "Larson's laws," are often studied to assess the dynamical state of clumps within molecular clouds. Using the result of a hydrodynamic simulation of a molecular cloud, we investigate how geometric projection may affect the derived Larson relationships. We find that large scale structures in the column density map have similar masses and sizes to those in the 3D simulation (PPP). Smaller scale clumps in the column density map are measured to be more massive than the PPP clumps, due to the projection of all emitting gas along lines of sight. Further, due to projection effects, structures in a synthetic spectral observation (PPV) may not necessarily correlate with physical structures in the simulation. In considering the turbulent velocities only, the linewidth-size relationship in the PPV cube is appreciably different from that measured from the simulation. Including thermal pressure in the simulated linewidths imposes a minimum linewidth, which results in a better agreement in the slopes of the linewidth-size relationships, though there are still discrepancies in the offsets, as well as considerable scatter. Employing commonly used assumptions in a virial analysis, we find similarities in the computed virial parameters of the structures in the PPV and PPP cubes. However, due to the discrepancies in the linewidth- and mass- size relationships in the PPP and PPV cubes, we caution that applying a virial analysis to observed clouds may be misleading due to geometric projection effects. We speculate that consideration of physical processes beyond kinetic and gravitational pressure would be required for accurately assessing whether complex clouds, such as those with highly filamentary structure, are bound.

We use a new contour-based map analysis technique to measure the mass and size of molecular cloud fragments continuously over a wide range of spatial scales (0.05 < r / pc < 10), i.e., from the scale of dense cores to those of entire clouds. The present paper presents the method via a detailed exploration of the Perseus Molecular Cloud. Dust extinction and emission data are combined to yield reliable scale-dependent measurements of mass. This scale-independent analysis approach is useful for several reasons. First, it provides a more comprehensive characterization of a map (i.e., not biased towards a particular spatial scale). Such a lack of bias is extremely useful for the joint analysis of many data sets taken with different spatial resolution. This includes comparisons between different cloud complexes. Second, the multi-scale mass-size data constitutes a unique resource to derive slopes of mass-size laws (via power-law fits). Such slopes provide singular constraints on large-scale density gradients in clouds.

In this paper we present a dust emission map of the starless core TMC-1C taken at 2100 microns. Along with maps at 160, 450, 850 and 1200 microns, we study the dust emissivity spectral index from the (sub)millimeter spectral energy distribution, and find that it is close to the typically assumed value of beta = 2. We also map the dust temperature and column density in TMC-1C, and find that at the position of the dust peak (A_V ~ 50), the line-of-sight-averaged temperature is ~7 K. Employing simple Monte Carlo modeling, we show that the data are consistent with a constant value for the emissivity spectral index over the whole map of TMC-1C.

We investigate the effect of line of sight temperature variations and noise on two commonly used methods to determine dust properties from dust continuum observations of dense cores. One method employs a direct fit to a modified blackbody SED; the other involves a comparison of flux ratios to an analytical prediction. Fitting fluxes near the SED peak produces inaccurate temperature and dust spectral index estimates due to the line of sight temperature (and density) variations. Longer wavelength fluxes in the Rayleigh-Jeans part of the spectrum (>~ 600 micron for typical cores) may more accurately recover the spectral index, but both methods are very sensitive to noise. The temperature estimate approaches the density weighted temperature, or "column temperature," of the source as short wavelength fluxes are excluded. An inverse temperature - spectral index correlation naturally results from SED fitting, due to the inaccurate isothermal assumption, as well as noise uncertainties. We show that above some "threshold" temperature, the temperatures estimated through the flux ratio method can be highly inaccurate. In general, observations with widely separated wavelengths, and including shorter wavelengths, result in higher threshold temperatures; such observations thus allow for more accurate temperature estimates of sources with temperatures less than the threshold temperature. When only three fluxes are available, a constrained fit, where the spectral index is fixed, produces less scatter in the temperature estimate when compared to the estimate from the flux ratio method.

We investigate how uncertainties in flux measurements affect the results from modified blackbody SED fits. We show that an inverse correlation between the dust temperature T and spectral index (beta) naturally arises from least squares fits due to the uncertainties, even for sources with a single T and beta. Fitting SEDs to noisy fluxes solely in the Rayleigh-Jeans regime produces unreliable T and beta estimates. Thus, for long wavelength observations (lambda >~ 200 micron), or for warm sources (T >~ 60 K), it becomes difficult to distinguish sources with different temperatures. We assess the role of noise in recent observational results that indicate an inverse and continuously varying T - beta relation. Though an inverse and continuous T - beta correlation may be a physical property of dust in the ISM, we find that the observed inverse correlation may be primarily due to noise.

The grand-design spiral galaxy M51 has long been a crucial target for theories of spiral structure. Studies of this iconic spiral can address the question of whether strong spiral structure is transient (e.g. interaction-driven) or long-lasting. As a clue to the origin of the structure in M51, we investigate evidence for radial variation in the spiral pattern speed using the radial Tremaine-Weinberg (TWR) method. We implement the method on CO observations tracing the ISM-dominant molecular component. Results from the method's numerical implementation--combined with regularization, which smooths intrinsically noisy solutions--indicate two distinct patterns speeds inside 4 kpc at our derived major axis PA=170 deg., both ending at corotation and both significantly higher than the conventionally adopted global value. Inspection of the rotation curve suggests that the pattern speed interior to 2 kpc lacks an ILR, consistent with the leading structure seen in HST near-IR observations. We also find tentative evidence for a lower pattern speed between 4 and 5.3 kpc measured by extending the regularized zone. As with the original TW method, uncertainty in major axis position angle (PA) is the largest source of error in the calculation; in this study, where \delta PA=+/-5 deg. a ~20% error is introduced to the parameters of the speeds at PA=170 deg. Accessory to this standard uncertainty, solutions with PA=175 deg. (also admitted by the data) exhibit only one pattern speed inside 4 kpc, and we consider this circumstance under the semblance of a radially varying PA.

We include feedback in global hydrodynamic simulations in order to study the star formation properties, and gas structure and dynamics, in models of galactic disks. We extend previous models by implementing feedback in gravitationally bound clouds: momentum is injected at a rate proportional to the star formation rate. This mechanical energy disperses cloud gas back into the surrounding ISM, truncating star formation in a given cloud, and raising the overall level of ambient turbulence. Propagating star formation can however occur as expanding shells collide, enhancing the density and triggering new cloud and star formation. By controlling the momentum injection per massive star and the specific star formation rate in dense gas, we find that the negative effects of high turbulence outweigh the positive ones, and in net feedback reduces the fraction of dense gas and thus the overall star formation rate. The properties of the large clouds that form are not, however, very sensitive to feedback, with cutoff masses of a few million solar masses, similar to observations. We find a relationship between the star formation rate surface density and the gas surface density with a power law index ~2 for our models with the largest dynamic range, consistent with theoretical expectations for our model of disk flaring. We point out that the value of the "Kennicutt-Schmidt" index depends on the thickness of the disk. With our simple feedback prescription (a single combined star formation event per cloud), we find that global spiral patterns are not sustained; less correlated feedback and smaller scale turbulence appear to be necessary for spiral patterns to persist.

We use CO and H alpha velocity fields to study the gas kinematics in the spiral arms and interarms of M51 (NGC 5194), and fit the 2D velocity field to estimate the radial and tangential velocity components as a function of spiral phase (arm distance). We find large radial and tangential streaming velocities, which are qualitatively consistent with the predictions of density wave theory and support the existence of shocks. The streaming motions are complex, varying significantly across the galaxy as well as along and between arms. Aberrations in the velocity field indicate that the disk is not coplanar, perhaps as far in as 20\arcsec\ (800 pc) from the center. Velocity profile fits from CO and H alpha are typically similar, suggesting that most of the H alpha emission originates from regions of recent star formation. We also explore vortensity and mass conservation conditions. Vortensity conservation, which does not require a steady state, is empirically verified. The velocity and density profiles show large and varying mass fluxes, which are inconsistent with a steady flow for a single dominant global spiral mode. We thus conclude that the spiral arms cannot be in a quasi-steady state in any rotating frame, and/or that out of plane motions may be significant.

We investigate the formation of substructure in spiral galaxies using global MHD simulations, including gas self-gravity. Our models extend previous local models by Kim and Ostriker (2002) by including the full effects of curvilinear coordinates, a realistic log-spiral perturbation, self-gravitational contribution from 5 radial wavelengths of the spiral shock, and variation of density and epicyclic frequency with radius. We show that with realistic Toomre Q values, self-gravity and galactic differential rotation produce filamentary gaseous structures with kpc-scale separations, regardless of the strength -- or even presence -- of a stellar spiral potential. However, the growth of sheared features distinctly associated with the spiral arms, described as spurs or feathers in optical and IR observations of many spiral galaxies, requires a sufficiently strong spiral potential in self gravitating models. Unlike independently-growing ''background'' filaments, the orientation of arm spurs depends on galactic location. Inside corotation, spurs emanate outward, on the convex side of the arm; outside corotation, spurs grow inward, on the concave side of the arm. Based on spacing, orientation, and the relation to arm clumps, it is possible to distinguish ''true spurs'' that originate as instabilities in the spiral arms from independently growing ''background'' filaments. Our models also suggest that magnetic fields are important in preserving grand design spiral structure when gas in the arms fragments via self-gravity into GMCs.