Context: ASPIICS is a novel externally occulted solar coronagraph, which will be launched onboard the PROBA-3 mission of the European Space Agency. The external occulter will be placed on the first satellite approximately 150 m ahead of the second satellite that will carry an optical instrument. During 6 hours per orbit, the satellites will fly in a precise formation, constituting a giant externally occulted coronagraph. Large distance between the external occulter and the primary objective will allow observations of the white-light solar corona starting from extremely low heights 1.1RSun. Aims: To analyze influence of optical ghost images formed inside the telescope and develop an algorithm for their removal. Methods: We implement the optical layout of ASPIICS in Zemax and study the ghost behaviour in sequential and non-sequential regimes. We identify sources of the ghost contributions and analyze their geometrical behaviour. Finally we develop a mathematical model and software to calculate ghost images for any given input image. Results: We show that ghost light can be important in the outer part of the field of view, where the coronal signal is weak, since the energy of bright inner corona is redistributed to the outer corona. However the model allows to remove the ghost contribution. Due to a large distance between the external occulter and the primary objective, the primary objective does not produce a significant ghost. The use of the Lyot spot in ASPIICS is not necessary.

We present the first detection of solar flare emission at middle-ultraviolet wavelengths around 2000 A by the channel 2 of the Large-Yield RAdiometer (LYRA) onboard the PROBA2 mission. The flare (SOL20170906) was also observed in the channel 1 of LYRA centered at the H I Lyman-{\alpha} line at 1216 A, showing a clear non-thermal profile in both channels. The flare radiation in channel 2 is consistent with the hydrogen Balmer continuum emission produced by an optically thin chromospheric slab heated up to 10000 K. Simultaneous observations in channels 1 and 2 allow the separation of the line emission (primarily from the Lyman-{\alpha} line) from the Balmer continuum emission. Together with the recent detection of the Balmer continuum emission in the near-ultraviolet by IRIS, the LYRA observations strengthen the interpretation of broadband flare emission as the hydrogen recombination continua originating in the chromosphere.

ASPIICS is a novel externally occulted coronagraph that will be launched onboard the PROBA-3 mission of ESA. The external occulter (EO) will be placed on one satellite ~150 m ahead of the second satellite with an optical instrument. During part of each orbit, the satellites will fly in a precise formation, constituting a giant externally occulted coronagraph. Large distance between the EO and the primary objective will allow observations of the white-light solar corona starting already from ~1.1RSun. We analyze influence of shifts of the satellites and misalignments of optical elements on diffracted light. Based on the quantitative influence of misalignments on diffracted light, we will provide a "recipe" for choosing the size of the internal occulter (IO) to achieve a trade-off between the minimal height of observations and sustainability to possible misalignments. We implement a numerical model of the diffracted light and its propagation through the optical system, and compute intensities of diffracted light throughout the instrument. Our numerical model extends axi-symmetrical model of Rougeot et al. 2017 to non-symmetrical cases. The computations fully confirm main properties of the diffracted light obtained from semi-analytical consideration. Results: relative influences of various misalignments are significantly different. We show that: the IO with R=1.1RSun is large enough to compensate possible misalignments in ASPIICS, apodizing the edge of the IO leads to additional suppression of the diffracted light. Conclusions: the most important misalignment is the tilt of the telescope WRT the line connecting the center of the EO and the entrance aperture. Special care should be taken to co-align the EO and the coronagraph, i.e. co-aligning the diffraction fringe from the EO and the IO. We suggest that the best orientation strategy is to point the coronagraph to the center of the EO.

We analyse nonlinear evolution of torsional Alfv\'en waves in a straight magnetic flux tube filled in with a low-$\beta$ plasma, and surrounded with a plasma of lower density. Such magnetic tubes model, in particular, a segment of a coronal loop or a polar plume. The wavelength is taken comparable to the tube radius. We perform numerical simulation of the wave propagation using ideal magnetohydrodynamics. We find that a torsional wave nonlinearly induces three kinds of compressive flows: the parallel flow at the Alfv\'en speed, that constitutes a bulk plasma motion along the magnetic field, the tube wave, and also transverse flows in the radial direction, associated with sausage fast magnetoacoustic modes. In addition, nonlinear torsional wave steepens and its propagation speed increases. The latter effect leads to the progressive distortion of torsional wave front, i.e. nonlinear phase mixing. Because of the intrinsic non-uniformity of the torsional wave amplitude across the tube radius, the nonlinear effects are more pronounced in regions with higher wave amplitude. They are always absent at the axes of the flux tube. In the case of a linear radial profile of the wave amplitude, the nonlinear effects are localised in an annulus region near the tube boundary. Thus, the parallel compressive flows driven by torsional Alfv\'en waves in the solar and stellar coronae, are essentially non-uniform in the perpendicular direction. The presence of additional sinks for the wave energy reduces the efficiency of the nonlinear parallel cascade in torsional Alfv\'en waves.

We present experimental evidence of the coronal mass ejection (CME) breakout reconnection, observed by the TESIS EUV telescope. The telescope could observe solar corona up to 2 $R_\odot$ from the Sun center in the Fe 171 \AA\ line. Starting from 2009 April 8 TESIS, observed an active region (AR) that had a quadrupolar structure with an X-point 0.5 $R_\odot$ above photosphere. A reconstructed from the MDI data magnetic field also has a multipolar structure with an X-point above the AR. At 21:45 UT on April 9, the loops near the X-point started to move away from each other with a velocity of $\approx$ 7 km s$^{-1}$. At 01:15 UT on April 10, a bright stripe appeared between the loops, and the flux in the GOES 0.5-4 \AA\ channel increased. We interpret the loops' sideways motion and the bright stripe as evidence of the breakout reconnection. At 01:45 UT, the loops below the X-point started to slowly move up. At 15:10 UT, the CME started to accelerate impulsively, while at the same time a flare arcade formed below the CME. After 15:50 UT, the CME moved with constant velocity. The CME evolution precisely followed the breakout model scenario.

Fast magnetoacoustic waves guided along the magnetic field by plasma non-uniformities, in particular coronal loops, fibrils and plumes, are known to be highly dispersive, which leads to the formation of quasi-periodic wave trains excited by a broadband impulsive driver, e.g. a solar flare. We investigated effects of cylindrical geometry on the fast sausage wave train formation. We performed magnetohydrodynamic numerical simulations of fast magnetoacoustic perturbations of a sausage symmetry, propagating from a localised impulsive source along a field-aligned plasma cylinder with a smooth radial profile of the fast speed. The wave trains are found to have pronounced period modulation, with the longer instant period seen in the beginning of the wave train. The wave trains have also a pronounced amplitude modulation. Wavelet spectra of the wave trains have characteristic tadpole features, with the broadband large-amplitude heads preceding low-amplitude quasi-monochromatic tails. The mean period of the wave train is about the transverse fast magnetoacoustic transit time across the cylinder. The mean parallel wavelength is about the diameter of the waveguiding plasma cylinder. Instant periods are longer than the sausage wave cutoff period. The wave train characteristics depend on the fast magnetoacoustic speed in both the internal and external media, and the smoothness of the transverse profile of the equilibrium quantities, and also the spatial size of the initial perturbation. If the initial perturbation is localised at the axis of the cylinder, the wave trains contain higher radial harmonics that have shorter periods.

We present detailed EUV spectra of 4 large solar flares: M5.6, X1.3, X3.4, and X17 classes in the spectral ranges 176-207 \AA\ and 280-330 \AA. These spectra were obtained {by the slitless} spectroheliograph SPIRIT aboard the CORONAS-F satellite. To our knowledge these are the first detailed EUV spectra of large flares obtained with spectral resolution of $\sim 0.1$ \AA. We performed a comprehensive analysis of the obtained spectra and provide identification of the observed spectral lines. The identification was performed based {on the calculation} of synthetic spectra (CHIANTI database was used), with simultaneous {calculations of DEM} and density of the emitting plasma. More than 50 intense lines are present in the spectra that correspond to a temperature range of $T=0.5-16$ MK; most of the lines belong to Fe, Ni, Ca, Mg, Si ions. In all the considered flares intense hot lines from Ca XVII, Ca XVIII, Fe XX, Fe XXII, and Fe XXIV are observed. The calculated DEMs have a peak at $T \sim 10$ MK. The densities were determined using Fe XI - Fe XIII lines and averaged $6.5 \times 10^9$ cm$^{-3}$. We also discuss the identification, accuracy and major discrepancies of the spectral line intensity prediction.

We present observations of hot arcades made with the Mg XII spectroheliograph onboard the CORONAS-F mission, which provides monochromatic images of hot plasma in the Mg XII 8.42 A resonance line. The arcades were observed to form above the polarity inversion line between Active Regions NOAA 09847 and 09848 at four successive episodes: at 09:18, 14:13, and 22:28 UT on 28 February 2002, and at 00:40 UT on 1 March 2002. The arcades all evolved in the same way: a) a small flare (precursor) appeared near the edge of the still invisible arcade, b) the arcade brightened in a wave-like manner - closer loops brightened earlier, and c) the arcade intensity gradually decreased in $\approx$ 1 h. The estimated wave speed was $\approx$ 700 km s$^{-1}$, and the distance between the hot loops was $\approx$ 50 Mm. The arcades formed without visible changes in their magnetic structure. The arcades were probably heated up by the instabilities of the current sheet above the arcade, which were caused by an MHD wave excited by the precursor.

Observations in the Mg XII 8.42 AA line onboard the CORONAS-F satellite have revealed compact high temperature objects-hot X-ray points (HXP)-and their major physical parameters were investigated. Time dependencies of temperature, emission measure, intensity, and electron density were measured for 169 HXPs. HXP can be divided into two groups by their temperature variations: those with gradually decreasing temperature and those with rapidly decreasing temperature. HXPs plasma temperatures lie in the range of 5-40 MK, the emission measure is $10^{45}$- $10^{48}$ cm$^{-3}$, and the electron density is above $10^{10}$ cm$^{-3}$, which exceeds the electron density in the quiet Sun ($10^8$-$10^9$ cm$^{-3}$). HXPs lifetimes vary between 5-100 minutes, significantly longer than the conductive cooling time. This means that throughout a HXP's lifetime, the energy release process continues, which helps to maintain its high temperature. A HXP's thermal energy is not greater than $10^{28}$ erg, and the total energy, which is released in HXPs, does not exceed $10^{30}$ erg. HXPs differ in their physical properties from other flare-like microevents, such as microflares, X-ray bright points, and nanoflares.