White-light images from Heliospheric Imager-1 (HI1) onboard the Solar Terrestrial Relations Observatory (STEREO) provide 2-dimensional (2D) global views of solar wind transients traveling in the inner heliosphere from two perspectives. How to retrieve the hidden three-dimensional (3D) features of the transients from these 2D images is intriguing but challenging. In our previous work (Li et al., 2018), a 'correlation-aided' method is developed to recognize the solar wind transients propagating along the Sun-Earth line based on simultaneous HI1 images from two STEREO spacecraft. Here the method is extended from the Sun-Earth line to the whole 3D space to reconstruct the solar wind transients in the common field of view of STEREO HI1 cameras. We demonstrate the capability of the method by showing the 3D shapes and propagation directions of a coronal mass ejection (CME) and three small-scale blobs during 3-4 April 2010. Comparing with some forward modeling methods, we found our method reliable in terms of the position, angular width and propagation direction. Based on our 3D reconstruction result, an angular distorted, nearly North-South oriented CME on 3 April 2010 is revealed, manifesting the complexity of a CME's 3D structure.

The largest geomagnetic storm so far in the solar cycle 24 was produced by a fast coronal mass ejection (CME) originating on 2015 March 15. It was an initially west-oriented CME and expected to only cause a weak geomagnetic disturbance. Why did this CME finally cause such a large geomagnetic storm? We try to find some clues by investigating its propagation from the Sun to 1 AU. First, we reconstruct the CME's kinematic properties in the corona from the SOHO and SDO imaging data with the aid of the graduated cylindrical shell (GCS) model. It is suggested that the CME propagated to the west $\sim$$33^\circ$$\pm$$10^\circ$ away from the Sun-Earth line with a speed of about 817 km s$^{-1}$ before leaving the field of view of the SOHO/LASCO C3 camera. A magnetic cloud (MC) corresponding to this CME was measured in-situ by the Wind spacecraft two days later. By applying two MC reconstruction methods, we infer the configuration of the MC as well as some kinematic information, which implies that the CME possibly experienced an eastward deflection on its way to 1 AU. However, due to the lack of observations from the STEREO spacecraft, the CME's kinematic evolution in interplanetary space is not clear. In order to fill this gap, we utilize numerical MHD simulation, drag-based CME propagation model (DBM) and the model for CME deflection in interplanetary space (DIPS) to recover the propagation process, especially the trajectory, of the CME from $30 R_S$ to 1 AU. It is suggested that the trajectory of the CME was deflected toward the Earth by about $12^\circ$, consistent with the implication from the MC reconstruction at 1 AU. This eastward deflection probably contributed to the CME's unexpected geoeffectiveness by pushing the center of the initially west-oriented CME closer to the Earth.

Mass is one of the most fundamental parameters characterizing the dynamics of a coronal mass ejection (CME). It has been found that CME apparent mass measured from the brightness enhancement in coronagraph images shows an increasing trend during its evolution in the corona. However, the physics behind it is not clear. Does the apparent mass gain come from the mass outflow from the dimming regions in the low corona, or from the pileup of the solar wind plasma around the CME when it propagates outwards from the Sun? We analyzed the mass evolution of six CME events. Their mass can increase by a factor of 1.6 to 3.2 from 4 to 15 Rs in the field of view (FOV) of the coronagraph on board the Solar Terrestrial Relations Observatory (STEREO). Over the distance about 7 to 15 Rs, where the coronagraph occulting effect can be negligible, the mass can increase by a factor of 1.3 to 1.7. We adopted the `snow-plough' model to calculate the mass contribution of the piled-up solar wind in the height range from about 7 to 15 Rs. For 2/3 of the events, the solar wind pileup is not sufficient to explain the measured mass increase. In the height range from about 7 to 15 Rs, the ratio of the modeled to the measured mass increase is roughly larger than 0.55. Although the ratios are believed to be overestimated, the result gives evidence that the solar wind pileup probably makes a non-negligible contribution to the mass increase. It is not clear yet whether the solar wind pileup is a major contributor to the final mass derived from coronagraph observations. However, our study suggests that the solar wind pileup plays increasingly important role in the mass increase as a CME moves further away from the Sun.

The dynamic process of coronal mass ejections (CMEs) in the heliosphere provides us the key information for evaluating CMEs' geo-effectiveness and improving the accurate prediction of CME induced Shock Arrival Time (SAT) at the Earth. We present a data constrained three dimensional (3D) magnetohydrodynamic (MHD) simulation of the evolution of the CME in a realistic ambient solar wind for the July 12-16, 2012 event by using the 3D COIN-TVD MHD code. A detailed comparison of the kinematic evolution of the CME between the observations and the simulation is carried out, including the usage of the time-elongation maps from the perspectives of both Stereo A and Stereo B. In this case study, we find that our 3D COIN-TVD MHD model, with the magnetized plasma blob as the driver, is able to re-produce relatively well the real 3D nature of the CME in morphology and their evolution from the Sun to Earth. The simulation also provides a relatively satisfactory comparison with the in-situ plasma data from the Wind spacecraft.

Though coronal mass ejections (CMEs) are magnetized fully-ionized gases, a recent observational study of a CME collision event in 2008 November has suggested that their behavior in the heliosphere is like elastic balls, and their collision is probably super-elastic \citep{Shen_etal_2012}. If this is true, this finding has an obvious impact on the space weather forecasting because the direction and veliocity of CMEs may change. To verify it, we numerically study the event through three-dimensional MHD simulations. The nature of CMEs' collision is examined by comparing two cases. In one case the two CMEs collide as observed, but in the other, they do not. Results show that the collision leads to extra kinetic energy gain by 3%--4% of the initial kinetic energy of the two CMEs. It firmly proves that the collision of CMEs could be super-elastic.

Among various factors affecting the space weather effects of a coronal mass ejection (CME), its propagation trajectory in the interplanetary space is an important one determining whether and when the CME will hit the Earth. Many direct observations have revealed that a CME may not propagate along a straight trajectory in the corona, but whether or not a CME also experiences a deflected propagation in the interplanetary space is a question, which has never been fully answered. Here by investigating the propagation process of an isolated CME from the corona to interplanetary space during 2008 September 12 -- 19, we present solid evidence that the CME was deflected not only in the corona but also in the interplanetary space. The deflection angle in the interplanetary space is more than 20 degrees toward the west, resulting a significant change in the probability the CME encounters the Earth. A further modeling and simulation-based analysis suggest that the cause of the deflection in the interplanetary space is the interaction between the CME and the solar wind, which is different from that happening in the corona.

To achieve high resolution imaging the standard control algorithm used for classical adaptive optics (AO) is the simple but efficient proportional-integral (PI) controller. The goal is to minimize the root mean square (RMS) error of the residual wave front. However, with the PI controller one does not reach this minimum. A possibility to achieve is to use Linear Quadratic Gaussian Control (LQG). In practice, however this control algorithm still encounters one unexpected problem, leading to the divergence of control in AO. In this paper we propose a Modified LQG (MLQG) to solve this issue. The controller is analyzed explicitly. Test in the lab shows strong stability and high precision compared to the classical control.

We classified the decoupled stochastic parallel gradient descent (SPGD) optimization model into two different types: software and hardware decoupling methods. A kind of software decoupling method is then proposed and a kind of hardware decoupling method is also proposed depending on the Shack-Hartmann (S-H) sensor. Using the normal sensor to accelerate the convergence of algorithm, the hardware decoupling method seems a capable realization of decoupled method. Based on the numerical simulation for correction of phase distortion in atmospheric turbulence, our methods are analyzed and compared with basic SPGD model and also other decoupling models, on the aspects of different spatial resolutions, mismatched control channels and noise. The results show that the phase distortion can be compensated after tens iterations with a strong capacity of noise tolerance in our model.