As astronomical observations from space benefit from improved sensitivity, the effectiveness of scientific programs is becoming limited by systematics that often originate in poorly understood image sensor behavior. Traditional, bottom-up detector characterization methods provide one way to model underlying detector physics, and generate ever more faithful numerical simulations, but this approach is vulnerable to preconceptions and over-simplification. The alternative top-down approach is laboratory emulation, which enables observation, calibration, and analysis scenarios to be tested without relying on a complete understanding of the underlying physics. This complements detector characterization and simulation efforts by testing their validity. We describe a laboratory facility and experimental testbed that supports the emulation of a wide range of mission concepts such as gravitational weak lensing measurements by WFIRST and high precision spectrophotometry of transiting exoplanets by JWST. An Offner relay projects readily customizable "scenes" (e.g. stars, galaxies, spectra) with very low optical aberration over the full area of a typical optical or near infrared image sensor. f/8 and slower focal ratios may be selected, spanning those of most proposed space missions and approximating the point spread function (PSF) size of seeing limited ground based surveys. Diffraction limited PSFs are projected over a wide field of view and wavelength range to deliver highly predictable image patterns down to sub-pixel scales with stable intensity and fine motion control. The testbed enables realistic validation of detector performance on science-like images, which aids mission design and survey strategy, as well as targeted investigations of various detector effects.

Extremely accurate shape measurements of galaxy images are needed to probe dark energy properties with weak gravitational lensing surveys. To increase survey area with a fixed observing time and pixel count, images from surveys such as the Wide Field Infrared Survey Telescope (WFIRST) or Euclid will necessarily be undersampled and therefore distorted by aliasing. Oversampled, unaliased images can be obtained by combining multiple, dithered exposures of the same source with a suitable reconstruction algorithm. Any such reconstruction must minimally distort the reconstructed images for weak lensing analyses to be unbiased. In this paper, we use the IMage COMbination (IMCOM) algorithm of Rowe, Hirata, and Rhodes to investigate the effect of image combination on shape measurements (size and ellipticity). We simulate dithered images of sources with varying amounts of ellipticity and undersampling, reconstruct oversampled output images from them using IMCOM, and measure shape distortions in the output. Our simulations show that IMCOM creates no significant distortions when the relative offsets between dithered images are precisely known. Distortions increase with the uncertainty in those offsets but become problematic only with relatively poor astrometric precision. E.g. for images similar to those from the Astrophysics Focused Telescope Asset (AFTA) implementation of WFIRST, combining eight undersampled images (sampling ratio Q=1) with highly pessimistic uncertainty in astrometric registration (\sigma_d~10^{-3} pixels) yields an RMS shear error of O(10^{-4}). Our analysis pipeline is adapted from that of the Precision Projector Laboratory -- a joint project between NASA Jet Propulsion Laboratory and Caltech which characterizes image sensors using laboratory emulations of astronomical data.

Weak gravitational lensing observations are a key science driver for the NASA Wide Field Infrared Survey Telescope (WFIRST). To validate the performance of the WFIRST infrared detectors, we have performed a laboratory emulation of weak gravitational lensing measurements. Our experiments used a custom precision projector system to image a target mask composed of a grid of pinholes, emulating stellar point sources, onto a 1.7 micron cut-off Teledyne HgCdTe/H2RG detector. We used a 880nm LED illumination source and f/22 pupil stop to produce undersampled point spread functions similar to those expected from WFIRST. We also emulated the WFIRST image reconstruction strategy, using the IMage COMbination (IMCOM) algorithm to derive oversampled images from dithered, undersampled input images. We created shear maps for this data and computed shear correlation functions to mimic a real weak lensing analysis. After removing only 2nd order polynomial fits to the shear maps, we found that the correlation functions could be reduced to O(10^-6). This places a conservative upper limit on the detector-induced bias to the correlation function (under our test conditions). This bias is two orders of magnitude lower than the expected weak lensing signal. Restricted to scales relevant to dark energy analyses (sky separations > 0.5 arcmin), the bias is O(10^-7): comparable to the requirement for future weak lensing missions to avoid biasing cosmological parameter estimates. Our experiment will need to be upgraded and repeated under different configurations to fully characterize the shape measurement performance of WFIRST IR detectors.

We outline the challenges associated with the development and construction of large focal plane arrays for use both on the ground and in space. Using lessons learned from existing JPL-led and ASU/JPL partnership efforts to develop technology for, and design such arrays and imagers for large focal planes, we enumerate here the remaining problems that need to be solved to make such a venture viable. Technologies we consider vital for further development include: (1) architectures, processes, circuits, and readout solutions for production and integration of four-side buttable, low-cost, high-fidelity, high-performance, and high-reliability CCD and CMOS imagers; (2) modular, four-side buttable packaging of CCD/CMOS imagers; (3) techniques and hardware to test and characterize the large number of chips required to produce the hundreds of flight-grade detectors needed for large focal-plane missions being conceived at this time; (4) ground based testbed needs, such as a large format camera mounted on a ground-based telescope, to field test the detectors and the focal plane technology solutions; and (5) validation of critical sub-components of the design on a balloon mission to ensure their flight-readiness. This paper outlines the steps required to provide a mature solution to the astronomical community with a minimal investment, building on years of planning and investments already completed at JPL.