Crystals are the elementary constituents of Laue lenses, an emerging technology which could allow the realization of a space borne telescope 10 to 100 times more sensitive than existing ones in the 100 keV - 1.5 MeV energy range. This study addresses the current endeavor to the development of efficient crystals for the realization of a Laue lens. In the theoretical part 35 candidate-crystals both pure and two-components are considered. Their peak reflectivity at 100 keV, 500 keV and 1 MeV is calculated assuming they are mosaic crystals. It results that a careful selection of crystals can allow a reflectivity above 30% over the whole energy range, and even reaching 40% in its lower part. Experimentally, we concentrated on three different materials (Si_{1-x}Ge_x with gradient of composition, mosaic Cu and Au) that have been measured both at ESRF and ILL using highly-monochromatic beams ranging from 300 keV up to 816 keV. The aim was to check their homogeneity, quality and angular spread (mosaicity). These crystals have shown outstanding performance such as reflectivity up to 31% at ~600 keV (Au) or 60% at 300 keV (SiGe) and angular spread as low as 15 arcsec for Cu, fulfilling very well the requirements for a Laue lens application. Unexpectedly, we also noticed important discrepancies with Darwin's model when a crystal is measured using various energies.

The Fresnel Interferometric Imager is a space-based astronomical telescope project yielding milli-arc second angular resolution and high contrast images with loose manufacturing constraints. This optical concept involves diffractive focusing and formation flying: a first "primary optics" space module holds a large binary Fresnel Array, and a second "focal module" holds optical elements and focal instruments that allow for chromatic dispersion correction. We have designed a reduced-size Fresnel Interferometric Imager prototype and made optical tests in our lab, in order to validate the concept for future space missions. The Primary module of this prototype consists of a square, 8 cm side, 23 m focal length Fresnel array. The focal module is composed of a diaphragmed small telescope used as "field lens", a small cophased diverging Fresnel Zone Lens (FZL) that cancels the dispersion and a detector. An additional module collimates the artificial targets of various shapes, sizes and dynamic ranges to be imaged. In this paper, we describe the experimental setup, different designs of the primary Fresnel array, and the cophased Fresnel Zone Lens that achieves rigorous chromatic correction. We give quantitative measurements of the diffraction limited performances and dynamic range on double sources. The tests have been performed in the visible domain, lambda = 400 - 700 nm. In addition, we present computer simulations of the prototype optics based on Fresnel propagation, that corroborate the optical tests. This numerical tool has been used to simulate the large aperture Fresnel arrays that could be sent to space with diameters of 3 to 30 m, foreseen to operate from Lyman-alpha (121 nm) to mid I.R. (25 microns).

This paper presents the results of a Fresnel Interferometric Array testbed. This new concept of imager involves diffraction focussing by a thin foil, in which many thousands of punched subapertures form a pattern related to a Fresnel zone plate. This kind of array is intended for use in space, as a way to realizing lightweight large apertures for high angular resolution and high dynamic range observations. The chromaticity due to diffraction focussing is corrected by a small diffractive achromatizer placed close to the focal plane of the array. The laboratory test results presented here are obtained with an 8 centimeter side orthogonal array, yielding a 23 meter focal length at 600 nm wavelength. The primary array and the focal optics have been designed and assembled in our lab. This system forms an achromatic image. Test targets of various shapes, sizes, dynamic ranges and intensities have been imaged. We present the first images, the achieved dynamic range, and the angular resolution.

The concept of a gamma-ray telescope based on a Laue lens offers the possibility to increase the sensitivity by more than an order of magnitude with respect to existing instruments. Laue lenses have been developed by our collaboration for several years : the main achievement of this R&D program was the CLAIRE lens prototype. Since then, the endeavour has been oriented towards the development of efficient diffracting elements (crystal slabs), the aim being to step from a technological Laue lens to a scientifically exploitable lens. The latest mission concept featuring a gamma-ray lens is the European Gamma-Ray Imager (GRI) which intends to make use of the Laue lens to cover energies from 200 keV to 1300 keV. Investigations of two promising materials, low mosaicity copper and gradient concentration silicon-germanium are presented in this paper. The measurements have been performed during three runs on beamline ID15A of the European Synchrotron Radiation Facility, and on the GAMS 4 instrument of the Institute Laue-Langevin (both in Grenoble, France) using highly monochromatic beam of energy close to 500 keV. Despite it was not perfectly homogeneous, the presented copper crystal exhibits peak reflectivity of 25% in accordance with theoretical predictions, and a mosaicity around 26 arcsec, the ideal range for the realization of a Laue lens such as GRI. Silicon-germanium featuring a constant gradient have been measured for the very first time at 500 keV. Two samples showed a quite homogeneous reflectivity reaching 26%, which is far from the 48% already observed in experimental crystals but a very encouraging beginning. This results have been used to estimate the performance of the GRI Laue lens design.

We propose a new kind of interferometric array that yields images of high dynamic range and large field. The numerous individual apertures in this array form a pattern related to a Fresnel zone plate. This array can be used for astrophysical imaging over a broad spectral bandwidth spanning from the U.V. (50 nanometers) to the I.R. (20 microns). Due to the long focal lengths involved, this instrument requires formation-flying of two space borne vessels. We present the concept and study the S/N ratio in different situations, then apply these results to probe the suitability of this concept to detect exoplanets.

Using XMM-Newton EPIC imaging data, we have detected 50 low-luminosity X-ray sources in the field of view of M 22, where 5 +/- 3 of these sources are likely to be related to the cluster. Using differential optical photometry, we have identified probable counterparts to those sources belonging to the cluster. Using X-ray spectroscopic and timing studies, supported by the optical colours, we propose that the most central X-ray sources in the cluster are cataclysmic variables, millisecond pulsars, active binaries and a blue straggler. We also identify a cluster of galaxies behind this globular cluster.