We take advantage of a set of molecular cloud simulations to demonstrate a possibility to uncover statistical properties of the gas density and velocity fields using reflected emission of a short (with duration much less than the cloud's light-crossing time) X-ray flare. Such situation is relevant for the Central Molecular Zone of our Galaxy where several clouds get illuminated by a $\sim110$ yr-old flare from the supermassive black hole Sgr A*. Due to shortness of the flare ($\Delta t\lesssim1.6$ yrs), only a thin slice ($\Delta z\lesssim0.5$ pc) of the molecular gas contributes to the X-ray reflection signal at any given moment, and its surface brightness effectively probes the local gas density. This allows reconstructing the density probability distribution function over a broad range of scales with virtually no influence of attenuation, chemo-dynamical biases and projection effects. Such measurement is key to understanding the structure and star-formation potential of the clouds evolving under extreme conditions in the CMZ. For cloud parameters similar to the currently brightest in X-ray reflection molecular complex Sgr A, the sensitivity level of the best available data is sufficient only for marginal distinction between solenoidal and compressive forcing of turbulence. Future-generation X-ray observatories with large effective area and high spectral resolution will dramatically improve on that by minimising systematic uncertainties due to contaminating signals. Furthermore, measurement of the iron fluorescent line centroid with sub-eV accuracy in combination with the data on molecular line emission will allow direct investigation of the gas velocity field.

We present synthetic dust polarization maps of simulated molecular clouds (MCs) with the goal to systematically explore the origin of the relative orientation of the magnetic field ($\bf{B}$) with respect to the MC sub-structures identified in density ($n$; 3D) and column density ($N$; 2D). The polarization maps are generated with the radiative transfer code POLARIS, including self-consistently calculated efficiencies for radiative torque alignment. The MCs are formed in two sets of 3D MHD simulations: in (i) colliding flows (CF), and (ii) the SILCC-Zoom simulations. In 3D, for the CF simulations with an initial field strength below $\sim$5 $\mu$G, $\bf{B}$ is oriented parallel or randomly with respect to the $n$-structures. For CF runs with stronger initial fields and all SILCC-Zoom simulations, which have an initial field strength of 3 $\mu$G, a flip from parallel to perpendicular orientation occurs at high densities of $n_\text{trans}$ $\simeq$ 10$^2$ - 10$^3$ cm$^{-3}$. We suggest that this flip happens if the MC's mass-to-flux ratio, $\mu$, is close to or below the critical value of 1. This corresponds to a field strength around 3 - 5 $\mu$G. In 2D, we use the Projected Rayleigh Statistics (PRS) to study the orientation of $\bf{B}$. If present, the flip in orientation occurs at $N_\text{trans}$ $\simeq$ 10$^{21 - 21.5}$ cm$^{-2}$, similar to the observed transition value from sub- to supercritical magnetic fields in the ISM. However, projection effects can reduce the power of the PRS method: Depending on the MC or LOS, the projected maps of the SILCC-Zoom simulations do not always show the flip, although expected from the 3D morphology. Such projection effects can explain the variety of recently observed field configurations, in particular within a single MC. Finally, we do not find a correlation between the observed orientation of $\bf{B}$ and the $N$-PDF.

We analyse the CO-dark molecular gas content of simulated molecular clouds from the SILCC-Zoom project. The simulations reach a resolution of 0.1 pc and include H$_2$ and CO formation, radiative stellar feedback and magnetic fields. CO-dark gas is found in regions with local visual extinctions $A_\text{V, 3D} \sim$ 0.2 - 1.5, number densities of 10 - 10$^{3}$ cm$^{-3}$ and gas temperatures of few 10 K - 100 K. CO-bright gas is found at number densities above 300 cm$^{-3}$ and temperatures below 50 K. The CO-dark gas fractions range from 40% to 95% and scale inversely with the amount of well-shielded gas ($A_\text{V, 3D}$ $\gtrsim$ 1.5), which is smaller in magnetised molecular clouds. We show that the density, chemical abundances and $A_\text{V, 3D}$ along a given line-of-sight cannot be properly determined from projected quantities. As an example, pixels with a projected visual extinction of $A_\text{V, 2D} \simeq$ 2.5 - 5 can be both, CO-bright or CO-dark, which can be attributed to the presence or absence of strong density enhancements along the line-of-sight. By producing synthetic CO(1-0) emission maps of the simulations with RADMC-3D, we show that about 15 - 65\% of the H$_2$ is in regions with intensities below the detection limit. Our clouds have $X_\text{CO}$-factors around 1.5 $\times$ 10$^{20}$ cm$^{-2}$ (K km s$^{-1}$)$^{-1}$ with a spread of up to a factor $\sim$ 4, implying a similar uncertainty in the derived total H$_2$ masses and even worse for individual pixels. Based on our results, we suggest a new approach to determine the H$_2$ mass, which relies on the availability of CO(1-0) emission and $A_\text{V, 2D}$ maps. It reduces the uncertainty of the clouds' overall H$_2$ mass to a factor of $\lesssim$ 1.8 and for individual pixels, i.e. on sub-pc scales, to a factor of $\lesssim$ 3.

We have studied the high-mass star-forming complex NGC 6334 with ALMA in the continuum emission at a frequency of 87.6 GHz, achieving a spatial resolution of 1300 au. Detecting 142 compact sources distributed over the whole observed area, we then used machine learning algorithms to group the compact cores in different clusters. A total of four main clusters were identified: NGC 6334-E, NGC 6334-I, NGC 6334-I(N) and NGC 6334-I(NW). The typical separations between cluster members (4000-12000 au) together with the core masses (0.2-100 $M_{\odot}$) are in agreement with turbulent fragmentation at scales of 0.1 pc. We find that the CMFs (core mass functions) show an excess of massive cores compared to the IMF. Typical uncertainties in temperature or unresolved multiplicity may mimic the observed excess of massive cores. Evidence of mass segregation in NGC 6334-I and NGC 6334-I(N), with the most massive cores located closer to the center, was found. Correlations between the physical properties of the clusters and their evolutionary stage were searched for, and found to show a larger separation between cores in the more evolved clusters, favouring the role of gas expulsion and stellar ejection over time. From these results, we suggest that NGC 6334-I(N) was primordially segregated, while NGC 6334-I may have become mass-segregated over time due to dynamical effects. Finally, the lack of massive cores in the most evolved cluster suggests that the gas reservoir may be already exhausted, while the less evolved clusters still have access to a larger gas mass reservoir. In general, the fragmentation in NGC 6334 at large scales (about 1 pc) is governed by turbulent pressure, while at smaller scales (a few hundred au), thermal pressure regulates the fragmentation process.

We present a new approach to extract the power-law part of a density/column-density probability density function (rho-pdf/N-pdf) in star-forming clouds. It is based on the mathematical method bPLFIT of Virkar & Clauset (2014) and assesses the power-law part of an arbitrary distribution, without any assumptions about the other part of this distribution. The slope and deviation point are derived as averaged values as the number of bins is varied. Neither parameter is sensitive to spikes and other local features of the tail. This adapted bPLFIT method is applied to two different sets of data from numerical simulations of star-forming clouds at scales 0.5 and 500 pc and displays rho-pdf and N-pdf evolution in agreement with a number of numerical and theoretical studies. Applied to Herschel data on the regions Aquila and Rosette, the method extracts pronounced power-law tails, consistent with those seen in simulations of evolved clouds.

Understanding the matter cycle in the interstellar medium of galaxies from the assembly of clouds to star formation and stellar feedback remains an important and exciting field in comtemporary astrophysics. Many open questions regarding cloud and structure formation, the role of turbulence, and the relative importance of the various feedback processes can only be addressed with observations of spectrally resolved lines. We here stress the importance of two specific sets of lines: the finestructure lines of atomic carbon as a tracer of the dark molecular gas and mid-J CO lines as tracers of the warm, active molecular gas in regions of turbulence dissipation and feedback. The observations must cover a wide range of environments (i.e., physical conditions), which will be achieved by large scale surveys of Galactic molecular clouds, the Galactic Center, the Magellanic clouds, and nearby galaxies. To date, such surveys are completely missing and thus constitute an important science opportunity for the next decade and beyond. For the successful interpretation of the observations, it will be essential to combine them with results from (chemical) modelling and simulations of the interstellar medium.

Sources of X-rays such as active galactic nuclei and X-ray binaries are often variable by orders of magnitude in luminosity over timescales of years. During and after these flares the surrounding gas is out of chemical and thermal equilibrium. We introduce a new implementation of X-ray radiative transfer coupled to a time-dependent chemical network for use in 3D magnetohydrodynamical simulations. A static fractal molecular cloud is irradiated with X-rays of different intensity, and the chemical and thermal evolution of the cloud are studied. For a simulated $10^5$ M$_\odot$ fractal cloud an X-ray flux $<0.01$ erg cm$^{-2}$ s$^{-1}$ allows the cloud to remain molecular, whereas most of the CO and H$_2$ are destroyed for a flux of $>1$ erg cm$^{-2}$ s$^{-1}$. The effects of an X-ray flare, which suddenly increases the X-ray flux by $10^5 \times$ are then studied. A cloud exposed to a bright flare has 99% of its CO destroyed in 10-20 years, whereas it takes $>10^3$ years for 99% of the H$_2$ to be destroyed. CO is primarily destroyed by locally generated far-UV emission from collisions between non-thermal electrons and H$_2$; He$^+$ only becomes an important destruction agent when the CO abundance is already very small. After the flare is over, CO re-forms and approaches its equilibrium abundance after $10^3-10^5$ years. This implies that molecular clouds close to Sgr A$^*$ in the Galactic Centre may still be out of chemical equilibrium, and we predict the existence of clouds near flaring X-ray sources in which CO has been mostly destroyed but H is fully molecular.

Young low-mass protostars undergo short phases of high accretion and outburst activity leading to lumpy outflows. Recent observations have shown that the position-velocity and mass-velocity diagrams of such outflows exhibit individual bullet-like features; some of these bullets subscribe to a `Hubble Law' velocity relation, and others are manifest as `Hubble wedges'. In order to explore the origin of these features, we have developed a new episodic outflow model for the SPH code {\sc gandalf}, which mimics the accretion and ejection behaviour of FU Ori type stars. We apply this model to simulations of star formation, invoking two types of initial conditions: spherically symmetric cores in solid-body rotation with $\rho\propto r^{-2}$, and spherically symmetric turbulent cores with density proportional to the density of a Bonnor-Ebert sphere. For a wide range of model parameters, we find that episodic outflows lead to self-regulation of the ejected mass and momentum, and we achieve acceptable results, even with relatively low resolution. Using this model, we find that recently ejected outflow bullets produce a `Hubble wedge' in the position-velocity relation. However, once such a bullet hits the leading shock front, it decelerates and aligns with older bullets to form a `Hubble-law'. Bullets can be identified as bumps in the mass-velocity relation, which can be fit with a power-law, $dM/d\upsilon_{_{\rm RAD}}\propto\upsilon_{_{\rm RAD}}^{-1.5}$.

As part of the SILCC-ZOOM project we present our first sub-parsec resolution radiation-hydrodynamic simulations of two molecular clouds self-consistently forming from a turbulent, multi-phase ISM. The clouds have similar initial masses of few 10$^4$ M$_{\odot}$, escape velocities of ~5 km s$^{-1}$, and a similar initial energy budget. We follow the formation of star clusters with a sink based model and the impact of radiation from individual massive stars with the tree-based radiation transfer module TreeRay. Photo-ionizing radiation is coupled to a chemical network to follow gas heating, cooling and molecule formation and dissociation. For the first 3 Myr of cloud evolution we find that the overall star formation effciency is considerably reduced by a factor of ~4 to global cloud values of < 10 % as the mass accretion of sinks that host massive stars is terminated after <1 Myr. Despite the low effciency, star formation is triggered across the clouds. Therefore, a much larger region of the cloud is affected by radiation and the clouds begin to disperse. The time scale on which the clouds are dispersed sensitively depends on the cloud substructure and in particular on the amount of gas at high visual extinction. The damage of radiation done to the highly shielded cloud (MC1) is delayed. We also show that the radiation input can sustain the thermal and kinetic energy of the clouds at a constant level. Our results strongly support the importance of ionizing radiation from massive stars for explaining the low observed star formation effciency of molecular clouds

The formation of molecular hydrogen (H$_2$) and carbon monoxide (CO) is sensitive to the volume and column density distribution of the turbulent interstellar medium. In this paper, we study H$_2$ and CO formation in a large set of hydrodynamical simulations of periodic boxes with driven supersonic turbulence, as well as in colliding flows with the \textsc{Flash} code. The simulations include a non-equilibrium chemistry network, gas self-gravity, and diffuse radiative transfer. We investigate the spatial resolution required to obtain a converged H$_2$ and CO mass fraction and formation history. From the numerical tests we find that H$_2$ converges at a spatial resolution of $\lesssim0.2$~pc, while the required resolution for CO convergence is $\lesssim 0.04$~pc in gas with solar metallicity which is subject to a solar neighbourhood interstellar radiation field. We derive two critical conditions from our numerical results: the simulation has to at least resolve the densities at which (1) the molecule formation time in each cell in the computational domain is equal to the dissociation time, and (2) the formation time is equal to the the typical cell crossing time. For both H$_2$ and CO, the second criterion is more restrictive. The formulae we derive can be used to check whether molecule formation is converged in any given simulation.

We present synthetic dust polarisation maps of 3D magneto-hydrodynamical simulations of molecular clouds before the onset of stellar feedback. The clouds are modelled within the SILCC-Zoom project and are embedded in their galactic environment. The radiative transfer is carried out with POLARIS for wavelengths from 70 $\mu$m to 3 mm at a resolution of 0.12 pc, and includes self-consistently calculated alignment efficiencies for radiative torque alignment. We explore the reason of the observed depolarisation in the center of molecular clouds: We find that dust grains remain well aligned even at high densities ($n$ $>$ 10$^3$ cm$^{-3}$) and visual extinctions ($A_\text{V}$ $>$ 1). The depolarisation is rather caused by strong variations of the magnetic field direction along the LOS due to turbulent motions. The observed magnetic field structure thus resembles best the mass-weighted, line-of-sight averaged field structure. Furthermore, it differs by only a few 1$^\circ$ for different wavelengths and is little affected by the spatial resolution of the synthetic observations. Noise effects can be reduced by convolving the image. Doing so, for $\lambda$ $\gtrsim$ 160 $\mu$m the observed magnetic field traces reliably the underlying field in regions with intensities $I$ $\gtrsim$ 2 times the noise level and column densities above 1 M$_\text{sun}$ pc$^{-2}$. Here, typical deviations are $\lesssim$ 10$^\circ$. The observed structure is less reliable in regions with low polarisation degrees and possibly in regions with large column density gradients. Finally, we show that a simplified and widely used method without self-consistent dust alignment efficiencies can provide a good representation of the observable polarisation structure with deviations below 5$^\circ$.

The C$^{+}$ ion is an important coolant of interstellar gas, and so the [CII] fine structure line is frequently observed in the interstellar medium. However, the physical and chemical properties of the [CII]-emitting gas are still unclear. We carry out non-LTE radiative transfer simulations with RADMC-3D to study the [CII] line emission from a young, turbulent molecular cloud before the onset of star formation, using data from the SILCC-Zoom project. The [CII] emission is optically thick over 40% of the observable area with $I_{[\textrm{CII}]} > 0.5$ K km s$^{-1}$. To determine the physical properties of the [CII] emitting gas, we treat the [CII] emission as optically thin. We find that the [CII] emission originates primarily from cold, moderate density gas ($40 \lesssim T \lesssim 65$ K and $50 \lesssim n \lesssim 440$ cm$^{-3}$), composed mainly of atomic hydrogen and with an effective visual extinction between $\sim 0.50$ and $\sim 0.91$. Gas dominated by molecular hydrogen contributes only $\lesssim$20% of the total [CII] line emission. Thus, [CII] is not a good tracer for CO-dark H$_2$ at this early phase in the cloud's lifetime. We also find that the total gas, H and C$^+$ column densities are all correlated with the integrated [CII] line emission, with power law slopes ranging from 0.5 to 0.7. Further, the median ratio between the total column density and the [CII] line emission is $Y_{{\rm CII}}\approx 1.1 \times 10^{21}$ cm$^{-2}$ (K km s$^{-1}$)$^{-1}$, and $Y_{{\rm CII}}$ scales with $I_{[\textrm{CII}]}^{-0.3}$. We expect $Y_{{\rm CII}}$ to change in environments with a lower or higher radiation field than simulated here.

Magnetic fields are ubiquitously observed in the interstellar medium (ISM) of present-day star-forming galaxies with dynamically relevant energy densities. Using three-dimensional magneto-hydrodynamic (MHD) simulations of the supernova (SN) driven ISM in the flux-freezing approximation (ideal MHD) we investigate the impact of the magnetic field on the chemical and dynamical evolution of the gas, fragmentation and the formation of molecular clouds. We follow the chemistry with a network of six species (H$^{+}$, H, H$_2$, C$^+$, CO, free electrons) including local shielding effects. We find that magnetic fields thicken the disc by a factor of a few to a scale height of $\sim100\,\mathrm{pc}$, delay the formation of dense (and molecular) gas by $\sim25\,\mathrm{Myr}$ and result in differently shaped gas structures. The magnetised gas fragments into fewer clumps, which are initially at subcritical mass-to-flux ratios, $M/\Phi\approx0.3(M/\Phi)_\mathrm{crit}$, and accrete gas preferentially parallel to the magnetic field lines until supercritial mass-to-flux ratios of up to order 10 are reached. The accretion rates onto molecular clouds scale with $\dot{M}\propto M^{1.5}$. The median of the inter-cloud velocity dispersion is $\sim2-5\,\mathrm{km\,s}^{-1}$ and lower than the internal velocity dispersion in the clouds ($\sim3-7\,\mathrm{km\,s}^{-1}$). However, individual cloud-cloud collisions occur at speeds of a few $10\,\mathrm{km\,s}^{-1}$.

Photoionizing radiation and stellar winds from massive stars deposit energy and momentum into the interstellar medium (ISM). They might disperse the local ISM, change its turbulent multi-phase structure, and even regulate star formation. Ionizing radiation dominates the massive stars' energy output, but the relative effect of winds might change with stellar mass and the properties of the ambient ISM. We present simulations of the interaction of stellar winds and ionizing radiation of 12, 23, and 60 M$_{\odot}$ stars within a cold neutral (CNM, $n_{0}$ = 100 cm$^{-3}$), warm neutral (WNM, $n_{0}$ = 1, 10 cm$^{-3}$) or warm ionized (WIM, $n_{0}$ = 0.1 cm$^{-3}$) medium. The FLASH simulations adopt the novel tree-based radiation transfer algorithm TreeRay. With the On-the-Spot approximation and a temperature-dependent recombination coefficient, it is coupled to a chemical network with radiative heating and cooling. In the homogeneous CNM, the total momentum injection ranges from 1.6$\times$10$^{4}$ to 4$\times$10$^{5}$ M$_{\odot}$ km s$^{-1}$ and is always dominated by the expansion of the ionized H$_{\text{II}}$ region. In the WIM, stellar winds dominate (2$\times$10$^{2}$ to 5$\times$10$^{3}$ M$_{\odot}$ km s$^{-1}$), while the input from radiation is small ($\sim$ 10$^{2}$ M$_{\odot}$ km s$^{-1}$). The WNM ($n_{0}$ = 1 cm$^{-3}$) is a transition regime. Energetically, stellar winds couple more efficiently to the ISM ($\sim$ 0.1 percent of wind luminosity) than radiation ($<$ 0.001 percent of ionizing luminosity). For estimating the impact of massive stars, the strongly mass-dependent ratios of wind to ionizing luminosity and the properties of the ambient medium have to be considered.

We present high-resolution ($\sim$ 0.1 pc), hydrodynamical and magnetohydrodynamical simulations to investigate whether the observed level of molecular cloud (MC) turbulence can be generated and maintained by external supernova (SN) explosions. The MCs are formed self-consistently within their large-scale galactic environment following the non-equilibrium formation of H$_2$ and CO including (self-) shielding and important heating and cooling processes. The MCs inherit their initial level of turbulence from the diffuse ISM, where turbulence is injected by SN explosions. However, by systematically exploring the effect of individual SNe going off outside the clouds, we show that at later stages the importance of SN driven turbulence is decreased significantly. This holds for different MC masses as well as MCs with and without magnetic fields. The SN impact also decreases rapidly with larger distances. Nearby SNe ($d$ $\sim$ 25 pc) boost the turbulent velocity dispersions of the MC by up to 70 per cent (up to a few km s$^{-1}$). For $d$ $>$ 50 pc, however, their impact decreases fast with increasing $d$ and is almost negligible. For all probed distances the gain in velocity dispersion decays rapidly within a few 100 kyr. This is significantly shorter than the average timescale for a MC to be hit by a nearby SN under solar neighbourhood conditions ($\sim$ 2 Myr). Hence, at these conditions SNe are not able to sustain the observed level of MC turbulence. However, in environments with high gas surface densities and SN rates like the Central Molecular Zone, observed elevated MC dispersions could be triggered by external SNe.

We present 3D "zoom-in" simulations of the formation of two molecular clouds out of the galactic interstellar medium. We model the clouds - identified from the SILCC simulations - with a resolution of up to 0.06 pc using adaptive mesh refinement in combination with a chemical network to follow heating, cooling, and the formation of H$_2$ and CO including (self-) shielding. The two clouds are assembled within a few million years with mass growth rates of up to $\sim$ 10$^{-2}$ M$_\mathrm{sun}$ yr$^{-1}$ and final masses of $\sim$ 50 000 M$_\mathrm{sun}$. A spatial resolution of $\lesssim$ 0.1 pc is required for convergence with respect to the mass, velocity dispersion, and chemical abundances of the clouds, although these properties also depend on the cloud definition such as based on density thresholds, H$_2$ or CO mass fraction. To avoid grid artefacts, the progressive increase of resolution has to occur within the free-fall time of the densest structures (1 - 1.5 Myr) and $\gtrsim$ 200 time steps should be spent on each refinement level before the resolution is progressively increased further. This avoids the formation of spurious, large-scale, rotating clumps from unresolved turbulent flows. While CO is a good tracer for the evolution of dense gas with number densities $n \geq$ 300 cm$^{-3}$, H$_2$ is also found for $n \lesssim 30$ cm$^{-3}$ due to turbulent mixing and becomes dominant at column densities around 30 - 50 M$_\mathrm{sun}$ pc$^{-2}$. The CO-to-H$_2$ ratio steadily increases within the first 2 Myr whereas $X_\mathrm{CO}\simeq$ 1 - 4 $\times$ 10$^{20}$ cm$^{-2}$ (K km s$^{-1}$)$^{-1}$ is approximately constant since the CO(1-0) line quickly becomes optically thick.

Aims: In this paper we present a case study to investigate conditions necessary to detect a characteristic magnetic field substructure embedded in a large-scale field. A helical magnetic field with a surrounding hourglass shaped field is expected from theoretical predictions and self-consistent magnetohydrodynamical (MHD) simulations to be present in the specific case of protostellar outflows. Hence, such an outflow environment is the perfect for our study. Methodes: We present synthetic polarisation maps in the infrared and millimeter regime of protostellar outflows performed with the newly developed RT and polarisation code POLARIS. The code, as the first, includes a self-consistent description of various alignement mechanism like the imperfect Davis-Greenstein (IDG) and the radiative torque (RAT) alignment. We investigate for which effects the grain size distribution, and applied alignement mechanism have. Results: We find that the IDG mechanism cannot produce any measurable polarization degree (< 1 %) whereas RAT alignment produced polarization degrees of a few 1 %. Furthermore, we developed a method to identify the origin of the polarization. We show that the helical magnetic field in the outflow can only be observed close to the outflow axis and at its tip, whereas in the surrounding regions the hourglass field in the foreground dominates the polarization. Furthermore, the polarization degree in the outflow lobe is lower than in the surroundings in agreement with observations. We also find that the orientation of the polarization vector flips around a few 100 micron due to the transition from dichroic extinction to thermal re-emission. Hence, in order to avoid ambiguities when interpreting polarization data, we suggest to observed in the far-infrared and mm regime. Finally, we show that with ALMA it is possible to observe the polarization emerging from protostellar outflows.

We present synthetic continuum and $^{13}$CO and C$^{18}$O line emission observations of dense and cold filaments. The filaments are dynamically evolved using 3D-MHD simulations that include one of the largest on-the-fly chemical networks used to date, which models the detailed evolution of H$_2$ and CO. We investigate the reliability of observable properties, in particular filament mass and width, under different simulation conditions like magnetic field orientation and cosmic ray ionisation rate. We find that filament widths of $\sim$0.1 pc can be probed with both line and continuum emission observations with a high accuracy (deviations $\leq$ 20%). However, the width of more narrow filaments can be significantly overestimated by up to a factor of a few. Masses obtained via the dust emission are accurate within a few percent whereas the masses inferred from molecular line emission observations deviate from the actual mass by up to a factor of 10 and show large differences for different $J$ transitions. The inaccurate estimate of filament masses and widths of narrow filaments using molecular line observations can be attributed to (i) the non-isothermal state of the filaments, (ii) optical depth effects, and (iii) the subthermally excited state of CO, while inclination effects and opacity correction only influence the obtained masses and widths by less than 50%. Both, mass and width estimates, can be improved by using two isotopes to correct for the optical depth. Since gas and dust temperature generally differ (by up to 25 K), the filaments appear more gravitationally unstable if the (too low) dust temperature is used for the stability analysis.

Dust grains are an important component of the interstellar medium (ISM) of galaxies. We present the first direct measurement of the residence times of interstellar dust in the different ISM phases, and of the transition rates between these phases, in realistic hydrodynamical simulations of the multi-phase ISM. Our simulations include a time-dependent chemical network that follows the abundances of H^+, H, H_2, C^+ and CO and take into account self-shielding by gas and dust using a tree-based radiation transfer method. Supernova explosions are injected either at random locations, at density peaks, or as a mixture of the two. For each simulation, we investigate how matter circulates between the ISM phases and find more sizeable transitions than considered in simple mass exchange schemes in the literature. The derived residence times in the ISM phases are characterised by broad distributions, in particular for the molecular, warm and hot medium. The most realistic simulations with random and mixed driving have median residence times in the molecular, cold, warm and hot phase around 17, 7, 44 and 1 Myr, respectively. The transition rates measured in the random driving run are in good agreement with observations of Ti gas-phase depletion in the warm and cold phases in a simple depletion model, although the depletion in the molecular phase is under-predicted. ISM phase definitions based on chemical abundance rather than temperature cuts are physically more meaningful, but lead to significantly different transition rates and residence times because there is no direct correspondence between the two definitions.

Supernova (SN) blast waves inject energy and momentum into the interstellar medium (ISM), control its turbulent multiphase structure and the launching of galactic outflows. Accurate modelling of the blast wave evolution is therefore essential for ISM and galaxy formation simulations. We present an efficient method to compute the input of momentum, thermal energy, and the velocity distribution of the shock-accelerated gas for ambient media with uniform (and with stellar wind blown bubbles), power-law, and turbulent density distributions. Assuming solar metallicity cooling, the blast wave evolution is followed to the beginning of the momentum conserving snowplough phase. The model recovers previous results for uniform ambient media. The momentum injection in wind-blown bubbles depend on the swept-up mass and the efficiency of cooling, when the blast wave hits the wind shell. For power-law density distributions with $n(r) \sim$ $r^{-2}$ (for $n(r) > n_{_{\rm floor}}$) the amount of momentum injection is solely regulated by the background density $n_{_{\rm floor}}$ and compares to $n_{_{\rm uni}}$ = $n_{_{\rm floor}}$. However, in turbulent ambient media with log-normal density distributions the momentum input can increase by a factor of 2 (compared to the homogeneous case) for high Mach numbers. The average momentum boost can be approximated as $p_{_{\rm turb}}/\mathrm{p_{_{0}}}\ =23.07\, \left(\frac{n_{_{0,\rm turb}}}{1\,{\rm cm}^{-3}}\right)^{-0.12} + 0.82 (\ln(1+b^{2}\mathcal{M}^{2}))^{1.49}\left(\frac{n_{_{0,\rm turb}}}{1\,{\rm cm}^{-3}}\right)^{-1.6}$. The velocity distributions are broad as gas can be accelerated to high velocities in low-density channels. The model values agree with results from recent, computationally expensive, three-dimensional simulations of SN explosions in turbulent media.

We present synthetic ALMA observations of Keplerian, protostellar discs in the Class 0 stage studying the emission of molecular tracers like $^{13}$CO, C$^{18}$O, HCO$^+$, H$^{13}$CO$^+$, N$_2$H$^+$, and H$_2$CO. We model the emission of discs around low- and intermediate-mass protostars. We show that under optimal observing conditions ALMA is able to detect the discs already in the earliest stage of protostellar evolution, although the emission is often concentrated to the innermost 50 AU. Therefore, a resolution of a few 0.1" might be too low to detect Keplerian discs around Class 0 objects. We also demonstrate that under optimal conditions for edge-on discs Keplerian rotation signatures are recognisable, from which protostellar masses can be inferred. For this we here introduce a new approach, which allows us to determine protostellar masses with higher fidelity than before. Furthermore, we show that it is possible to reveal Keplerian rotation even for strongly inclined discs and that ALMA should be able to detect possible signs of fragmentation in face-on discs. In order to give some guidance for future ALMA observations, we investigate the influence of varying observing conditions and source distances. We show that it is possible to probe Keplerian rotation in inclined discs with an observing time of 2 h and a resolution of 0.1", even in the case of moderate weather conditions. Furthermore, we demonstrate that under optimal conditions, Keplerian discs around intermediate-mass protostars should be detectable up to kpc-distances.

We use magnetohydrodynamical simulations of converging warm neutral medium flows to analyse the formation and global evolution of magnetised and turbulent molecular clouds subject to supernova feedback from massive stars. We show that supernova feedback alone fails to disrupt entire, gravitationally bound, molecular clouds, but is able to disperse small--sized (~10 pc) regions on timescales of less than 1 Myr. Efficient radiative cooling of the supernova remnant as well as strong compression of the surrounding gas result in non-persistent energy and momentum input from the supernovae. However, if the time between subsequent supernovae is short and they are clustered, large hot bubbles form that disperse larger regions of the parental cloud. On longer timescales, supernova feedback increases the amount of gas with moderate temperatures (T~300-3000 K). Despite its inability to disrupt molecular clouds, supernova feedback leaves a strong imprint on the star formation process. We find an overall reduction of the star formation efficiency by a factor of 2 and of the star formation rate by roughly factors of 2-4.

We present simulations of star forming filaments incorporating on of the largest chemical network used to date on-the-fly in a 3D-MHD simulation. The network contains 37 chemical species and about 300 selected reaction rates. For this we use the newly developed package KROME (Grassi et al. 2014). We combine the KROME package with an algorithm which allows us to calculate the column density and attenuation of the interstellar radiation field necessary to properly model heating and ionisation rates. Our results demonstrate the feasibility of using such a complex chemical network in 3D-MHD simulations on modern supercomputers. We perform simulations with different strengths of the interstellar radiation field and the cosmic ray ionisation rate. We find that towards the centre of the filaments there is gradual conversion of hydrogen from H to H$_2$ as well as of C$^+$ over C to CO. Moreover, we find a decrease of the dust temperature towards the centre of the filaments in agreement with recent HERSCHEL observations.

We present simulations of star forming filaments incorporating - to our knowledge - the largest chemical network used to date on-the-fly in a 3D-MHD simulation. The network contains 37 chemical species and about 300 selected reaction rates. For this we use the newly developed package KROME (Grassi et al. 2014). Our results demonstrate the feasibility of using such a complex chemical network in 3D-MHD simulations on modern supercomputers. We perform simulations with different strengths of the interstellar radiation field and the cosmic ray ionisation rate and find chemical and physical results in accordance with observations and other recent numerical work.

We analyse simulations of turbulent, magnetised molecular cloud cores focussing on the formation of Class 0 stage protostellar discs and the physical conditions in their surroundings. We show that for a wide range of initial conditions Keplerian discs are formed in the Class 0 stage already. Furthermore, we show that the accretion of mass and angular momentum in the surroundings of protostellar discs occurs in a highly anisotropic manner, by means of a few narrow accretion channels. The magnetic field structure in the vicinity of the discs is highly disordered, revealing field reversals up to distances of 1000 AU. These findings demonstrate that as soon as even mild turbulent motions are included, the classical disc formation scenario of a coherently rotating environment and a well-ordered magnetic field breaks down.

We present simulations of collapsing filaments studying the impact of turbulence and magnetic field morphologies on their evolution and star formation properties. We vary the mass per unit length of the filaments as well as the orientation of the magnetic field with respect to the major axis. We find that the filaments, which have no or a perpendicular magnetic field, typically reveal a smaller width than the universal width of 0.1 pc proposed by e.g. Arzoumanian et al. 2011. We show that this also holds in the presence of supersonic turbulence and that accretion driven turbulence is too weak to stabilize the filaments along their radial direction. On the other hand, we find that a magnetic field that is parallel to the major axis can stabilize the filament against radial collapse resulting in widths of 0.1 pc. Furthermore, depending on the filament mass and magnetic field configuration, gravitational collapse and fragmentation in filaments occurs either in an edge-on way, uniformly distributed across the entire length, or in a mixed way. In the presence of initially moderate density perturbations, a centralized collapse towards a common gravitational centre occurs. Our simulations can thus reproduce different modes of fragmentation observed recently in star forming filaments. Moreover, we find that turbulent motions influence the distance between individual fragments along the filament, which does not always match the results of a Jeans analysis.

We analyse simulations of turbulent, magnetised molecular cloud cores focussing on the formation of Class 0 stage protostellar discs and the physical conditions in their surroundings. We show that for a wide range of initial conditions Keplerian discs are formed in the Class 0 stage already. In particular, we show that even subsonic turbulent motions reduce the magnetic braking efficiency sufficiently in order to allow rotationally supported discs to form. We therefore suggest that already during the Class 0 stage the fraction of Keplerian discs is significantly higher than 50%, consistent with recent observational trends but significantly higher than predictions based on simulations with misaligned magnetic fields, demonstrating the importance of turbulent motions for the formation of Keplerian discs. We show that the accretion of mass and angular momentum in the surroundings of protostellar discs occurs in a highly anisotropic manner, by means of a few narrow accretion channels. The magnetic field structure in the vicinity of the discs is highly disordered, revealing field reversals up to distances of 1000 AU. These findings demonstrate that as soon as even mild turbulent motions are included, the classical disc formation scenario of a coherently rotating environment and a well-ordered magnetic field breaks down. Hence, it is highly questionable to assess the magnetic braking efficiency based on non-turbulent collapse simulation. We strongly suggest that, in addition to the global magnetic field properties, the small-scale accretion flow and detailed magnetic field structure have to be considered in order to assess the likelihood of Keplerian discs to be present.

$\textit{Aims.}$ We present a case study to demonstrate the potential of multi-wavelength polarization measurements. The aim is to investigate the effects that dichroic polarization and thermal re-emission have on tracing the magnetic field in the interstellar medium (ISM). Furthermore, we analyze the crucial influence of imperfectly aligned compact dust grains on the resulting synthetic continuum polarization maps.$\\ \textit{Methods.}$ We developed an extended version of the well-known 3D Monte-Carlo radiation transport code MC3D for multi-wavelength polarization simulations running on an adaptive grid.We investigated the interplay between radiation, magnetic fields and dust grains. Our results were produced by post-processing both ideal density distributions and sophisticated magnetohydrodynamic (MHD) collapse simulations with radiative transfer simulations. We derived spatially resolved maps of intensity, optical depth, and linear and circular polarization at various inclination angles and scales in a wavelength range from 7 $\mu m$ to 1 $mm$.$\\ \textit{Results.}$ We predict unique patterns in linear and circular polarization maps for different types of density distributions and magnetic field morphologies for test setups and sophisticated MHD collapse simulations. We show that alignment processes of interstellar dust grains can significantly influence the resulting synthetic polarization maps. Multi-wavelength polarization measurements allow one to predict the morphology of the magnetic field inside the ISM. The interpretation of polarization measurements of complex structures still remains ambiguous because of the large variety of the predominant parameters in the ISM.

The first supernova explosions are potentially relevant sources for the production of the first large-scale magnetic fields. For this reason we present a set of high resolution simulations studying the effect of supernova explosions on magnetized, primordial halos. We focus on the evolution of an initially small-scale magnetic field formed during the collapse of the halo. We vary the degree of magnetization, the halo mass, and the amount of explosion energy in order to account for expected variations as well as to infer systematical dependencies of the results on initial conditions. Our simulations suggest that core collapse supernovae with an explosion energy of 10^51 erg and more violent pair instability supernovae with 10^53 erg are able to disrupt halos with masses up to a about 10^6 and 10^7 M_sun, respectively. The peak of the magnetic field spectra shows a continuous shift towards smaller k-values, i.e. larger length scales, over time reaching values as low as k = 4. On small scales the magnetic energy decreases at the cost of the energy on large scales resulting in a well-ordered magnetic field with a strength up to ~ 10^-8 G depending on the initial conditions. The coherence length of the magnetic field inferred from the spectra reaches values up to 250 pc in agreement with those obtained from autocorrelation functions. We find the coherence length to be as large as $50\%$ of the radius of the supernova bubble. Extrapolating this relation to later stages we suggest that significantly strong magnetic fields with coherence lengths as large as 1.5 kpc could be created. We discuss possible implications of our results on processes like recollapse of the halo, first galaxy formation, and the magnetization of the intergalactic medium.

Chemistry plays a key role in many astrophysical situations regulating the cooling and the thermal properties of the gas, which are relevant during gravitational collapse, the evolution of disks and the fragmentation process. In order to simplify the usage of chemical networks in large numerical simulations, we present the chemistry package KROME, consisting of a Python pre-processor which generates a subroutine for the solution of chemical networks which can be embedded in any numerical code. For the solution of the rate equations, we make use of the high-order solver DLSODES, which was shown to be both accurate and efficient for sparse networks, which are typical in astrophysical applications. KROME also provides a large set of physical processes connected to chemistry, including photochemistry, cooling, heating, dust treatment, and reverse kinetics. The package presented here already contains a network for primordial chemistry, a small metal network appropriate for the modelling of low metallicities environments, a detailed network for the modelling of molecular clouds, a network for planetary atmospheres, as well as a framework for the modelling of the dust grain population. In this paper, we present an extended test suite ranging from one-zone and 1D-models to first applications including cosmological simulations with ENZO and RAMSES and 3D collapse simulations with the FLASH code. The package presented here is publicly available at http://kromepackage.org/ and https://bitbucket.org/krome/krome_stable

The formation of stars is usually accompanied by the launching of protostellar outflows. Observations with the Atacama Large Millimetre/sub-millimetre Array (ALMA) will soon revolutionalise our understanding of the morphologies and kinematics of these objects. In this paper, we present synthetic ALMA observations of protostellar outflows based on numerical magnetohydrodynamic collapse simulations. We find significant velocity gradients in our outflow models and a very prominent helical structure within the outflows. We speculate that the disk wind found in the ALMA Science Verification Data of HD 163296 presents a first instance of such an observation.

We present collapse simulations of strongly magnetised, turbulent molecular cloud cores with masses ranging from 2.6 to 1000 M_sun in order to study the influence of the initial conditions on the turbulence-induced disc formation mechanism proposed recently by Seifried et al. 2012. We find that Keplerian discs are formed in all cases independently of the core mass, the strength of turbulence, or the presence of global rotation. The discs appear within a few kyr after the formation of the protostar, are 50 - 150 AU in size, and have masses between 0.05 and a few 0.1 M_sun. During the formation of the discs the mass-to-flux ratio stays well below the critical value of 10 for Keplerian disc formation. Hence, flux-loss alone cannot explain the formation of Keplerian discs. The formation of rotationally supported discs at such early phases is rather due to the disordered magnetic field structure and due to turbulent motions in the surroundings of the discs, two effects lowering the classical magnetic braking efficiency. Binary systems occurring in the discs are mainly formed via the disc capturing mechanism rather than via disc fragmentation, which is largely suppressed by the presence of magnetic fields.

We present collapse simulations of strongly magnetised, 100 M_sun, turbulent cloud cores. Around the protostars formed during the collapse Keplerian discs with typical sizes of up to 100 AU build up in contrast to previous simulations neglecting turbulence. Analysing the condensations in which the discs form, we show that the magnetic flux loss is not sufficient to explain the build-up of Keplerian discs. The average magnetic field is strongly inclined to the disc which might reduce the magnetic braking efficiency. However, the main reason for the reduced magnetic braking efficiency is the highly disordered magnetic field in the surroundings of the discs. Furthermore, due to the lack of a coherently rotating structure in the turbulent environment of the disc no toroidal magnetic field necessary for angular momentum extraction can build up. Simultaneously the angular momentum inflow remains high due to local shear flows created by the turbulent motions. We suggest that the "magnetic braking catastrophe" is an artefact of the idealised non-turbulent initial conditions and that turbulence provides a natural mechanism to circumvent this problem.

We present collapse simulations of 100 M_{\sun}, turbulent cloud cores threaded by a strong magnetic field. During the initial collapse phase filaments are generated which fragment quickly and form several protostars. Around these protostars Keplerian discs with typical sizes of up to 100 AU build up in contrast to previous simulations neglecting turbulence. We examine three mechanisms potentially responsible for lowering the magnetic braking efficiency and therefore allowing for the formation of Keplerian discs. Analysing the condensations in which the discs form, we show that the build-up of Keplerian discs is neither caused by magnetic flux loss due to turbulent reconnection nor by the misalignment of the magnetic field and the angular momentum. It is rather a consequence of the turbulent surroundings of the disc which exhibit no coherent rotation structure while strong local shear flows carry large amounts of angular momentum. We suggest that the "magnetic braking catastrophe", i.e. the formation of sub-Keplerian discs only, is an artefact of the idealised non-turbulent initial conditions and that turbulence provides a natural mechanism to circumvent this problem.

(abridged) The nature of early Class 0/I protostellar discs is not clearly understood. Early protostellar discs are needed to drive molecular outflows and jets observed in star forming regions, but there has been some debate to how they form. From a theoretical perspective, the consequences of disc and outflow generation are crucial to understanding the very nature of how stars are assembled. We have performed 3D ideal magnetohydrodynamic (MHD) simulations of collapsing Bonnor-Ebert spheres, employing sink particles with a radius of 3.2 AU alongside an AMR grid and using a cooling function to model radiative cooling of the gas. This has allowed us to explore 2-8x10^4 yr further into the evolution of an early Class 0 disc-outflow system than previous simulations. Our outflow is precessing, kinked, turbulent, contains internal shocks and has a scale of 0.1 pc end-to-end. We form a rotationally dominated disc with a radius of 100 AU embedded inside a transient, unstable, flattened, rotating core extending out to 2000 AU. The larger flattened structure launches a low speed wind (v_r < 1.5 km/s) dominated by B_phi, while the inner disc launches a centrifugally driven jet dominated by B_p with speeds up to 20$ km/s. From the inner disk, the value of dM/dt_out/dM/dt_in ~ 0.1, wheras in the outer core dM/dt_out/dM/dt_in ~ 1.0. The inner disc becomes unstable to a warping instability due to the magnetic structure of the outflow and warps to 30 deg with respect to the z-axis by the end of the simulation. The envelope is cleared out and is less massive than the disc. We measure star formation efficiencies of eta_core=0.63 (and growing), higher than theoretical predictions. This indicates that outflows are not as efficient at expelling envelope mass as some current models estimate. We discuss the relevance of our disc misalignment concerning the formation of mis-aligned hot Jupiters.

Numerical simulations of outflows formed during the collapse of 100 M_sun cloud cores are presented. We derive a generalised criterion from MHD wind theory to analyse the launching mechanism of these outflows. The criterion is successfully applied to the whole outflow structure and cases with sub-Keplerian disc rotation. It allows us to decide whether an outflow is driven centrifugally or by the toroidal magnetic pressure. We show that quantities such as the magnetic field line inclination or the ratio of the toroidal to poloidal magnetic field alone are insufficient to determine the driving mechanism of outflows. By performing 12 runs we are able to study the influence of the initial conditions on the properties of outflows around massive protostars in detail. Our simulations reveal a strong effect of the magnetic field strength on the outflow morphology. In runs with weak fields or high rotational energies, well collimated, fast jets are observed whereas for strong fields poorly collimated, low-velocity outflows are found. We show that the occurrence of a fast jet is coupled to the existence of a Keplerian protostellar disc. Despite the very different morphologies all outflows are launched from the discs by centrifugal acceleration with the toroidal magnetic field increasingly contributing to the gas acceleration further away from the discs. The poor collimation of the outflows in runs with strong fields is a consequence of the weak hoop stresses. This in turn is caused by the slow build-up of a toroidal field due to sub-Keplerian disc rotation. The mass ejection/accretion ratios scatter around a mean of 0.3 in accordance with observational and analytical results. We suggest an evolutionary scenario for the earliest stage of massive star formation in which initially poorly collimated outflows develop which progressively get better collimated due to the generation of fast jets.

We present simulations of collapsing 100 M_\sun mass cores in the context of massive star formation. The effect of variable initial rotational and magnetic energies on the formation of massive stars is studied in detail. We focus on accretion rates and on the question under which conditions massive Keplerian disks can form in the very early evolutionary stage of massive protostars. For this purpose, we perform 12 simulations with different initial conditions extending over a wide range in parameter space. The equations of magnetohydrodynamics (MHD) are solved under the assumption of ideal MHD. We find that the formation of Keplerian disks in the very early stages is suppressed for a mass-to-flux ratio normalised to the critical value \mu below 10, in agreement with a series of low-mass star formation simulations. This is caused by very efficient magnetic braking resulting in a nearly instantaneous removal of angular momentum from the disk. For weak magnetic fields, corresponding to \mu > 10, large-scale, centrifugally supported disks build up with radii exceeding 100 AU. A stability analysis reveals that the disks are supported against gravitationally induced perturbations by the magnetic field and tend to form single stars rather than multiple objects. We find protostellar accretion rates of the order of a few 10^-4 M_\sun yr^-1 which, considering the large range covered by the initial conditions, vary only by a factor of ~ 3 between the different simulations. We attribute this fact to two competing effects of magnetic fields. On the one hand, magnetic braking enhances accretion by removing angular momentum from the disk thus lowering the centrifugal support against gravity. On the other hand, the combined effect of magnetic pressure and magnetic tension counteracts gravity by exerting an outward directed force on the gas in the disk thus reducing the accretion onto the protostars.

Context: The thermal instability is one of the dynamical agents for turbulence in the diffuse interstellar medium, where both, turbulence and thermal instability interact in a highly non-linear manner. Aims: We study basic properties of turbulence in thermally bistable gas for variable simulation parameters. The resulting cold gas fractions can be applied as parameterisation in simulations on galactic scales. Methods: Turbulent flow is induced on large scales by means of compressive stochastic forcing in a periodic box. The compressible Euler equations with constant UV heating and a parameterised cooling function are solved on uniform grids. We investigate several values of the mean density of the gas and different magnitudes of the forcing. For comparison with other numerical studies, solenoidal forcing is applied as well. Results: After a transient phase, we observe that a state of statistically stationary turbulence is approached. Compressive forcing generally produces a two-phase medium, with a decreasing fraction of cold gas for increasing forcing strength. This behaviour can be explained on the basis of turbulent mixing. We also find indications for power-law tails of probability density functions of the gas density. Solenoidal forcing, on the other hand, appears to prevent the evolution into a two-phase-medium for certain parameter regions. Conclusions: The dynamics of thermally bistable turbulence shows a substantial sensitivity on the initial state and the forcing properties.

We implemented sink particles in the Adaptive Mesh Refinement (AMR) code FLASH to model the gravitational collapse and accretion in turbulent molecular clouds and cores. Sink particles are frequently used to measure properties of star formation in numerical simulations, such as the star formation rate and efficiency, and the mass distribution of stars. We show that only using a density threshold for sink particle creation is insufficient in case of supersonic flows, because the density can exceed the threshold in strong shocks that do not necessarily lead to local collapse. Additional physical collapse indicators have to be considered. We apply our AMR sink particle module to the formation of a star cluster, and compare it to a Smoothed Particle Hydrodynamics (SPH) code with sink particles. Our comparison shows encouraging agreement of gas and sink particle properties between the AMR and SPH code.