We outline a simple procedure designed for \emph{automatically} finding sets of multiple images in strong lensing (SL) clusters. We show that by combining (a) an arc-finding (or source extracting) program, (b) photometric redshift measurements, and (c) a preliminary light-traces-mass lens model, multiple-image systems can be identified in a fully automated (`blind') manner. The presented procedure yields an assessment of the likelihood of each arc to belong to one of the multiple-image systems, as well as the preferred redshift for the different systems. These could be then used to automatically constrain and refine the initial lens model for an accurate mass distribution. We apply this procedure to \emph{Cluster Lensing And Supernova with Hubble} observations of three galaxy clusters, MACS J0329.6-0211, MACS J1720.2+3536, and MACS J1931.8-2635, comparing the results to published SL analyses where multiple images were verified by eye on a particular basis. In the first cluster all originally identified systems are recovered by the automated procedure, and in the second and third clusters about half are recovered. Other known systems are not picked up, in part due to a crude choice of parameters, ambiguous photometric redshifts, or inaccuracy of the initial lens model. On top of real systems recovered, some false images are also mistakenly identified by the procedure, depending on the thresholds used. While further improvements to the procedure and a more thorough scrutinisation of its performance are warranted, the work constitutes another important step toward fully automatising SL analyses for studying mass distributions of large cluster samples.

We report the results of $EasyCritics$, a fully automated algorithm for the efficient search of strong-lensing (SL) regions in wide-field surveys, applied to the Canada-France-Hawaii Telescope Lensing Survey (CFHTLenS). By using only the photometric information of the brightest elliptical galaxies distributed over a wide redshift range ($\smash{0.2 \lesssim z \lesssim 0.9}$) and without requiring the identification of arcs, our algorithm produces lensing potential models and catalogs of critical curves of the entire survey area. We explore several parameter set configurations in order to test the efficiency of our approach. In a specific configuration, $EasyCritics$ generates only $\sim1200$ possibly super-critical regions in the CFHTLS area, drastically reducing the effective area for inspection from $154$ sq. deg to $\sim0.623$ sq. deg, $i.e.$ by more than two orders of magnitude. Among the pre-selected SL regions, we identify 32 of the 44 previously known lenses on the group and cluster scale, and discover 9 new promising lens candidates. The detection rate can be easily improved to $\sim82\%$ by a simple modification in the parameter set, but at the expense of increasing the total number of possible SL candidates. Note that $EasyCritics$ is fully complementary to other arc-finders since we characterize lenses instead of directly identifying arcs. Although future comparisons against numerical simulations are required for fully assessing the efficiency of $EasyCritics$, the algorithm seems very promising for upcoming surveys covering $\smash{10^{4}}$ sq. deg, such as the $Euclid$ mission and $LSST$, where the pre-selection of candidates for any kind of SL analysis will be indispensable due to the expected enormous data volume.

We describe a method for dark matter detection based on the evaporation of helium atoms from a cold surface and their subsequent detection using field ionization. When a dark matter particle scatters off a nucleus of the target material, elementary excitations (phonons or rotons) are produced. Excitations which have an energy greater than the binding energy of helium to the surface can result in the evaporation of helium atoms. We propose to detect these atoms by ionizing them in a strong electric field. Because the binding energy of helium to surfaces can be below 1~meV, this detection scheme opens up new possibilities for the detection of dark matter particles in a mass range down to 1~MeV/c$^{2}$.

This white paper summarizes the workshop "U.S. Cosmic Visions: New Ideas in Dark Matter" held at University of Maryland on March 23-25, 2017.

We present results from a comprehensive lensing analysis in HST data, of the complete CLASH cluster sample. We identify new multiple-images previously undiscovered allowing improved or first constraints on the cluster inner mass distributions and profiles. We combine these strong-lensing constraints with weak-lensing shape measurements within the HST FOV to jointly constrain the mass distributions. The analysis is performed in two different common parameterizations (one adopts light-traces-mass for both galaxies and dark matter while the other adopts an analytical, elliptical NFW form for the dark matter), to provide a better assessment of the underlying systematics - which is most important for deep, cluster-lensing surveys, especially when studying magnified high-redshift objects. We find that the typical (median), relative systematic differences throughout the central FOV are $\sim40\%$ in the (dimensionless) mass density, $\kappa$, and $\sim20\%$ in the magnification, $\mu$. We show maps of these differences for each cluster, as well as the mass distributions, critical curves, and 2D integrated mass profiles. For the Einstein radii ($z_{s}=2$) we find that all typically agree within $10\%$ between the two models, and Einstein masses agree, typically, within $\sim15\%$. At larger radii, the total projected, 2D integrated mass profiles of the two models, within $r\sim2\arcmin$, differ by $\sim30\%$. Stacking the surface-density profiles of the sample from the two methods together, we obtain an average slope of $d\log (\Sigma)/d\log(r)\sim-0.64\pm0.1$, in the radial range [5,350] kpc. Lastly, we also characterize the behavior of the average magnification, surface density, and shear differences between the two models, as a function of both the radius from the center, and the best-fit values of these quantities.

Strong gravitational lensing provides fundamental insights into the understanding of the dark matter distribution in massive galaxies, galaxy clusters and the background cosmology. Despite their importance, the number of gravitational arcs discovered so far is small. The urge for more complete, large samples and unbiased methods of selecting candidates is rising. A number of methods for the automatic detection of arcs have been proposed in the literature, but large amounts of spurious detections retrieved by these methods forces observers to visually inspect thousands of candidates per square degree in order to clean the samples. This approach is largely subjective and requires a huge amount of eye-ball checking, especially considering the actual and upcoming wide field surveys, which will cover thousands of square degrees. In this paper we study the statistical properties of colours of gravitational arcs detected in the 37 deg^2 of the CARS survey. We have found that most of them lie in a relatively small region of the (g'-r',r'-i') colour-colour diagram. To explain this property, we provide a model which includes the lensing optical depth expected in a LCDM cosmology that, in combination with the sources' redshift distribution of a given survey, in our case CARS, peaks for sources at redshift z~1. By further modelling the colours derived from the SED of the galaxies dominating the population at that redshift, the model well reproduces the observed colours. By taking advantage of the colour selection suggested by both data and model, we show that this multi-band filtering returns a sample 83% complete and a contamination reduced by a factor of ~6.5 with respect to the single-band arcfinder sample. New arc candidates are also proposed.

The dependence on an applied electric field of the ionization current produced by an energetic electron stopped in liquid helium can be used to determine the spatial distribution of secondary electrons with respect to their geminate partners. An analytic expression relating the current and distribution is derived. The distribution is found to be non-Gaussian with a long tail at larger distances.

The scintillation properties of liquid helium upon the recoil of a low energy helium atom are discussed in the context of the possible use of this medium as a detector of dark matter. It is found that the prompt scintillation yield in the range of recoil energies from a few keV to 100 keV is somewhat higher than that obtained by a linear extrapolation from the measured yield for an 5 MeV alpha particle. A comparison is made of both the scintillation yield and the charge separation by an electric field for nuclear recoils and for electrons stopped in helium.

Strong lensing gravitational time delays are a powerful and cost effective probe of dark energy. Recent studies have shown that a single lens can provide a distance measurement with 6-7 % accuracy (including random and systematic uncertainties), provided sufficient data are available to determine the time delay and reconstruct the gravitational potential of the deflector. Gravitational-time delays are a low redshift (z~0-2) probe and thus allow one to break degeneracies in the interpretation of data from higher-redshift probes like the cosmic microwave background in terms of the dark energy equation of state. Current studies are limited by the size of the sample of known lensed quasars, but this situation is about to change. Even in this decade, wide field imaging surveys are likely to discover thousands of lensed quasars, enabling the targeted study of ~100 of these systems and resulting in substantial gains in the dark energy figure of merit. In the next decade, a further order of magnitude improvement will be possible with the 10000 systems expected to be detected and measured with LSST and Euclid. To fully exploit these gains, we identify three priorities. First, support for the development of software required for the analysis of the data. Second, in this decade, small robotic telescopes (1-4m in diameter) dedicated to monitoring of lensed quasars will transform the field by delivering accurate time delays for ~100 systems. Third, in the 2020's, LSST will deliver 1000's of time delays; the bottleneck will instead be the aquisition and analysis of high resolution imaging follow-up. Thus, the top priority for the next decade is to support fast high resolution imaging capabilities, such as those enabled by the James Webb Space Telescope and next generation adaptive optics systems on large ground based telescopes.

We perform a strong-lensing analysis of the merging galaxy cluster MACS J0416.1-2403 (M0416; z=0.42) in recent CLASH/HST observations. We identify 70 new multiple images and candidates of 23 background sources in the range 0.7<z_{phot}<6.14 including two probable high-redshift dropouts, revealing a highly elongated lens with axis ratio ~5:1, and a major axis of ~100\arcsec (z_{s}~2). Compared to other well-studied clusters, M0416 shows an enhanced lensing efficiency. Although the critical area is not particularly large (~0.6 \square\arcmin; z_{s}~2), the number of multiple images, per critical area, is anomalously high. We calculate that the observed elongation boosts the number of multiple images, \emph{per critical area}, by a factor of ~2.5\times, due to the increased ratio of the caustic area relative to the critical area. Additionally, we find that the observed separation between the two main mass components enlarges the critical area by a factor of ~2. These geometrical effects can account for the high number (density) of multiple images observed. We find in numerical simulations, that only ~4% of the clusters (with M_{vir}>6 x 10^{14} h^{-1}M_{\odot}) exhibit as elongated critical curves as M0416.

We derive an accurate mass distribution of the galaxy cluster MACS J1206.2-0847 (z=0.439) from a combined weak-lensing distortion, magnification, and strong-lensing analysis of wide-field Subaru BVRIz' imaging and our recent 16-band Hubble Space Telescope observations taken as part of the Cluster Lensing And Supernova survey with Hubble (CLASH) program. We find good agreement in the regions of overlap between several weak and strong lensing mass reconstructions using a wide variety of modeling methods, ensuring consistency. The Subaru data reveal the presence of a surrounding large scale structure with the major axis running approximately north-west south-east (NW-SE), aligned with the cluster and its brightest galaxy shapes, showing elongation with a \sim 2:1 axis ratio in the plane of the sky. Our full-lensing mass profile exhibits a shallow profile slope dln\Sigma/dlnR\sim -1 at cluster outskirts (R>1Mpc/h), whereas the mass distribution excluding the NW-SE excess regions steepens further out, well described by the Navarro-Frenk-White form. Assuming a spherical halo, we obtain a virial mass M_{vir}=(1.1\pm 0.2\pm 0.1)\times 10^{15} M_{sun}/h and a halo concentration c_{vir} = 6.9\pm 1.0\pm 1.2 (\sim 5.7 when the central 50kpc/h is excluded), which falls in the range 4< <c> <7 of average c(M,z) predictions for relaxed clusters from recent Lambda cold dark matter simulations. Our full lensing results are found to be in agreement with X-ray mass measurements where the data overlap, and when combined with Chandra gas mass measurements, yield a cumulative gas mass fraction of 13.7^{+4.5}_{-3.0}% at 0.7Mpc/h (\approx 1.7r_{2500}), a typical value observed for high mass clusters.

Euclid is a space-based survey mission from the European Space Agency designed to understand the origin of the Universe's accelerating expansion. It will use cosmological probes to investigate the nature of dark energy, dark matter and gravity by tracking their observational signatures on the geometry of the universe and on the cosmic history of structure formation. The mission is optimised for two independent primary cosmological probes: Weak gravitational Lensing (WL) and Baryonic Acoustic Oscillations (BAO). The Euclid payload consists of a 1.2 m Korsch telescope designed to provide a large field of view. It carries two instruments with a common field-of-view of ~0.54 deg2: the visual imager (VIS) and the near infrared instrument (NISP) which contains a slitless spectrometer and a three bands photometer. The Euclid wide survey will cover 15,000 deg2 of the extragalactic sky and is complemented by two 20 deg2 deep fields. For WL, Euclid measures the shapes of 30-40 resolved galaxies per arcmin2 in one broad visible R+I+Z band (550-920 nm). The photometric redshifts for these galaxies reach a precision of dz/(1+z) < 0.05. They are derived from three additional Euclid NIR bands (Y, J, H in the range 0.92-2.0 micron), complemented by ground based photometry in visible bands derived from public data or through engaged collaborations. The BAO are determined from a spectroscopic survey with a redshift accuracy dz/(1+z) =0.001. The slitless spectrometer, with spectral resolution ~250, predominantly detects Ha emission line galaxies. Euclid is a Medium Class mission of the ESA Cosmic Vision 2015-2025 programme, with a foreseen launch date in 2019. This report (also known as the Euclid Red Book) describes the outcome of the Phase A study.

The statistics of strongly lensed arcs in samples of galaxy clusters provide information on cluster structure that is complementary to that from individual clusters. However, samples of clusters that have been analyzed to date have been either small, heterogeneous, or observed with limited angular resolution. We measure the lensed-arc statistics of 97 clusters imaged at high angular resolution with the Hubble Space Telescope, identifying lensed arcs using two automated arc detection algorithms. The sample includes similar numbers of X-ray selected (MACS) and optically selected (RCS) clusters, and spans cluster redshifts in the range 0.2 < z < 1. We compile a catalogue of 42 arcs in the X-ray selected subsample and 7 arcs in the optical subsample. All but five of these arcs are reported here for the first time. At 0.3 < z < 0.7, the X-ray selected clusters have a significantly higher mean frequency of arcs, 1.2+/-0.2 per cluster, versus 0.2+/-0.1 in the optical sample. The strikingly different lensing efficiencies indicate that X-ray clusters trace much larger mass concentrations, despite the similar optical luminosities of the X-ray and optical clusters. The mass difference is supported also by the lower space density of the X-ray clusters, and by the small Einstein radii of the few arcs in the optical sample. Higher-order effects, such as differences in concentration or substructure, may also contribute.

Results are presented for a simulation carried out to test the precision with which a detector design (HERON) based on a superfluid helium target material should be able to measure the solar pp and Be7 fluxes. It is found that precisions of +/- 1.68% and +/- 2.97% for pp and Be7 fluxes, respectively, should be achievable in a 5-year data sample. The physics motivation to aim for these precisions is outlined as are the detector design, the methods used in the simulation and sensitivity to solar orbit eccentricity.

We present an efficient algorithm designed for and capable of detecting elongated, thin features such as lines and curves in astronomical images, and its application to the automatic detection of gravitational arcs. The algorithm is sufficiently robust to detect such features even if their surface brightness is near the pixel noise in the image, yet the amount of spurious detections is low. The algorithm subdivides the image into a grid of overlapping cells which are iteratively shifted towards a local centre of brightness in their immediate neighbourhood. It then computes the ellipticity for each cell, and combines cells with correlated ellipticities into objects. These are combined to graphs in a next step, which are then further processed to determine properties of the detected objects. We demonstrate the operation and the efficiency of the algorithm applying it to HST images of galaxy clusters known to contain gravitational arcs. The algorithm completes the analysis of an image with 3000x3000 pixels in about 4 seconds on an ordinary desktop PC. We discuss further applications, the method's remaining problems and possible approaches to their solution.

The Rayleigh scattering length has been calculated for rare-gas liquids in the ultraviolet for the frequencies at which they luminesce. The calculations are based on the measured dielectric constants in the gas phase, except in the case of xenon for which measurements are available in the liquid. The scattering length mayplace constraints on the design of some large-scale detectors, using uv luminescence, being proposed to observe solar neutrinos and dark matter. Rayleigh scattering in mixtures of rare-gas mixtures is also discussed.