We have investigated the partitioning of U between silicate melt and Fe liquid at pressures of 3.0 to14.5 GPa and temperatures of 1660 to 2500 oC. The solubility of U in liquid Fe is in the range of 0.6 to 800 ppm and increases with temperature (T) and pressure (P). When P = or > 7 GPa and T > Tmelt of the silicate phase (olivine), the U concentration in Fe is 3 to 5 times greater than for run products where T < Tmelt of the silicate phase. Correspondingly, partitioning coefficient DU values can reach 0.031 at 8.5 GPa (using BN sample container) and 0.036 at 14.5 GPa (using graphite sample container). This implies that if a terrestrial-type planetary core with a pure Fe composition formed from a deep magma ocean (T > Tmelt of the silicate phase), then > 2.4 ppb U could have entered the core. Alternatively, if a core with same composition formed by percolation (T < Tmelt of the silicate phase), then based on the experimental results indicating DU increases with increasing P, 1 to 4 ppb U may have entered the core. The concentration of Si in liquid Fe also increases with pressure. The concentration of Ca is < 0.44 wt % for most samples and no relation with U concentration is found, which indicates that U may alloy with Fe directly. If Si concentration in the Fe phase can be used as an indicator of oxygen fugacity, then the increase in Si and U with pressure suggests a pressure dependent decrease in oxygen fugacity. This supports U (and possibly also Si) inclusion in the the core of Earth at the time of core formation. The implications for radioactive heating in the planetary cores are briefly discussed. Keywords: Uranium; partition coefficients; high pressure; dynamos; planetary cores; heat sources, LA-ICP-MS.

Uranium is the most important heat producing element in the Earth. The presence of an appreciable amount of U in the core of Earth would have an important influence on geodynamics. In this study, the solubility of U in Fe-10wt% S and in Fe-35wt% S was measured by partitioning experiments with a mixture of peridotite, uraninite, Fe and FeS powder at pressure (P) of 0-9 GPa and temperature (T) of 1500-2200 oC. Comparisons with the run products containing pure Fe as the metal phase in our previous study and re-analysis of run products were made in this study. We found that in all run products, including Fe-10wt% S, Fe-35wt% S and pure Fe groups, the solubility and partitioning of U in the pure metal or metal-sulfide phase relative to the silicate phase (DU) increases with increasing P and T. With a molten silicate phase, DU is generally 3-6 times larger than with a solid silicate phase. While DU has a positive dependence on S concentration of the metal-sulfide phase, there is a negative correlation between Ca and U. According to our calculations based on these experimental results, if the core has formed from a magma ocean at a P of 26 GPa at its base and the core contained 10wt% S, then it could have incorporated at least 10 ppb U. Alternatively, if the core formed by percolation and contained 10wt% S, then it could have incorporated 5-22 ppb U. The geophysical implications of U in the core of Earth are discussed.