State-of-the-art stellar structure and evolution codes fail to adequately describe turbulent convection. For stars with convective envelopes, such as red giants, this leads to an incomplete depiction of the surface layers. As a result, the predicted stellar oscillation frequencies are haunted by systematic errors, the so-called surface effect. Different empirically and theoretically motivated correction relations have been proposed to deal with this issue. In this paper, we compare the performance of these surface correction relations for red giant branch stars. For this purpose, we apply the different surface correction relations in asteroseismic analyses of eclipsing binaries and open clusters. In accordance with previous studies of main-sequence stars, we find that the use of different surface correction relations biases the derived global stellar properties, including stellar age, mass, and distance estimates. We furthermore demonstrate that the different relations lead to the same systematic errors for two different open clusters. Our results overall discourage from the use of surface correction relations that rely on reference stars to calibrate free parameters. Due to the demonstrated systematic biasing of the results, the use of appropriate surface correction relations is imperative to any asteroseismic analysis of red giants. Accurate mass, age, and distance estimates for red giants are fundamental when addressing questions that deal with the chemo-dynamical evolution of the Milky Way galaxy. In this way, our results also have implications for fields, such as galactic archaeology, that draw on findings from stellar physics.

The Milky Way, like other disc galaxies, underwent violent mergers and accretion of smaller satellite galaxies in its early history. Thanks to $\mathit Gaia$-DR2 and spectroscopic surveys, the stellar remnants of such mergers have been identified. The chronological dating of such events is crucial to uncover the formation and evolution of the Galaxy at high redshift, but it has so far been challenging owing to difficulties in obtaining precise ages for these oldest stars. Here we combine asteroseismology -- the study of stellar oscillations -- with kinematics and chemical abundances, to estimate precise stellar ages ($\sim$ 11%) for a sample of stars observed by the $\mathit{Kepler}$ space mission. Crucially, this sample includes not only some of the oldest stars that were formed inside the Galaxy, but also stars formed externally and subsequently accreted onto the Milky Way. Leveraging this unprecedented temporal resolution in age, we provide overwhelming evidence in favour of models in which the Galaxy had already formed a significant population of its stars (which now reside mainly in its thick disc) before the in-fall of the satellite galaxy $\mathit{Gaia}$-$\mathit{Enceladus}$ 10 billions years ago.

Ultracool dwarfs have emerged as key targets for searches of transiting exoplanets. Precise estimates of the host parameters (including mass, age, and radius) are fundamental to constrain the physical properties of orbiting exoplanets. We have extended our evolutionary code CLES (Code Li\'egeois d'Evolution Stellaire) to the ultracool dwarf regime. We include relevant equations of state for H, He, as well as C and O elements to cover the temperature-density regime of ultracool dwarf interiors. For various metallicities, we couple the interior models to two sets of model atmospheres as surface boundary conditions. We show that including C and O in the EOS has a significant effect close the H-burning limit mass. The typical systematic error associated with uncertainties in input physics in evolutionary models is $\sim 0.0005 M_\odot$. We test model results against observations for objects whose parameters have been determined from independent techniques. We are able to reproduce dynamical mass measurements of LSPM J1314+1320AB within $1\sigma$ with the condition of varying the metallicity (determined from calibrations) up to $2.5\sigma$. For GJ 65AB, a $2\sigma$ agreement is obtained between individual masses from differential astrometry and those from evolutionary models. We provide tables of ultracool dwarf models for various masses and metallicities that can be used as reference when estimating parameters for ultracool objects.

A key aspect in the determination of stellar properties is the comparison of observational constraints with predictions from stellar models. Asteroseismic Inference on a Massive Scale (AIMS) is an open source code that uses Bayesian statistics and a Markov Chain Monte Carlo approach to find a representative set of models that reproduce a given set of classical and asteroseismic constraints. These models are obtained by interpolation on a pre-calculated grid, thereby increasing computational efficiency. We test the accuracy of the different operational modes within AIMS for grids of stellar models computed with the Li\`ege stellar evolution code (main sequence and red giants) and compare the results to those from another asteroseismic analysis pipeline, PARAM. Moreover, using artificial inputs generated from models within the grid (assuming the models to be correct), we focus on the impact on the precision of the code when considering different combinations of observational constraints (individual mode frequencies, period spacings, parallaxes, photospheric constraints,...). Our tests show the absolute limitations of precision on parameter inferences using synthetic data with AIMS, and the consistency of the code with expected parameter uncertainty distributions. Interpolation testing highlights the significance of the underlying physics to the analysis performance of AIMS and provides caution as to the upper limits in parameter step size. All tests demonstrate the flexibility and capability of AIMS as an analysis tool and its potential to perform accurate ensemble analysis with current and future asteroseismic data yields.

The Sun is the most studied of all stars. It is a reference for all other observed stars and a laboratory of fundamental physics helping us understand processes occuring in conditions irreproducible on Earth. However, our understanding of the Sun is currently stained by the solar modelling problem which can stem from various causes, such as the opacities, the equation of state and the mixing of chemical elements. We combine inversions of sound speed, an entropy proxy and the Ledoux discriminant with constraints such as the position of the base of the convective zone and the photospheric helium abundance. We test various combinations of standard ingredients for solar modelling such as abundance tables, equation of state, formalism for convection and diffusion and opacity tables and study the diagnostic potential of the inversions to constrain ad-hoc modifications of the opacity profile and additional mixing below the convective envelope. Combining inversions provides stringent constraints on the modifications on the models, far beyond what is achievable only from sound speed inversions. We constrain the form and amplitude of the opacity increase required and show that a 15% increase at log T=6.35 provides a significant improvement but that a more global increase of the opacity, within the uncertainties of current tables, coupled with an additional mixing at the bottom of the convective zone gives the best agreement for low metallicity models. We show that high metallicity models do not satisfy all the inversion results. We conclude that the solar problem likely occurs from various small sources, as ingredients such as the equation of state or the formalism of convection can induce small but significant changes and that using phase shift analyses combined with our approach is the next step for a better understanding of the inaccuracies of solar models just below the convective envelope.

Since the CoRoT and Kepler missions, the availability of high quality seismic spectra for red giants has made them the standard clocks and rulers for Galactic Archeology. With the expected excellent data from the TESS and PLATO missions, red giants will again play a key role in Galactic studies and stellar physics, thanks to the precise masses and radii determined by asteroseismology. The determination of these quantities is often based on so-called scaling laws, which have been used extensively for main-sequence stars. We show how the SOLA inversion technique can provide robust determinations of the mean density of red giants within 1 per cent of the real value, using only radial oscillations. Combined with radii determinations from Gaia of around 2 per cent precision, this approach provides robust, less model-dependent masses with an error lower than 10 per cent. It will improve age determinations, helping to accurately dissect the Galactic structure and history. We present results on artificial data of standard models, models including an extended atmosphere from averaged 3D simulations and non-adiabatic frequency calculations to test surface effects, and on eclipsing binaries. We show that the inversions provide very robust mean density estimates, using at best seismic information. However, we also show that a distinction between red-giant branch and red-clump stars is required to determine a reliable estimate of the mean density. The stability of the inversion enables an implementation in automated pipelines, making it suitable for large samples of stars.

TRAPPIST-1 is an ultracool dwarf star transited by seven Earth-sized planets, for which thorough characterization of atmospheric properties, surface conditions encompassing habitability and internal compositions is possible with current and next generation telescopes. Accurate modeling of the star is essential to achieve this goal. We aim to obtain updated stellar parameters for TRAPPIST- 1 based on new measurements and evolutionary models, compared to those used in discovery studies. We present a new measurement for the parallax of TRAPPIST-1, 82.4 $\pm$ 0.8 mas, based on 188 epochs of observations with the TRAPPIST and Liverpool Telescopes from 2013 to 2016. This revised parallax yields an updated luminosity of $L_*=(5.22\pm0.19)\times 10^{-4} L_{\odot}$, very close to the previous estimate but almost twice more precise. We next present an updated estimate for TRAPPIST-1 stellar mass, based on two approaches: mass from stellar evolution modeling, and empirical mass derived from dynamical masses of equivalently classified ultracool dwarfs in astrometric binaries. We combine them through a Monte-Carlo approach to derive a semi-empirical estimate for the mass of TRAPPIST-1. We also derive estimate for the radius by combining this mass with stellar density inferred from transits, as well as estimate for the effective temperature from our revised luminosity and radius. Our final results are $M_*=0.089 \pm 0.006 M_{\odot}$, $R_* = 0.121 \pm 0.003 R_{\odot}$, and $T_{\rm eff} =$ 2516 $\pm$ 41 K. Considering the degree to which TRAPPIST-1 system will be scrutinized in coming years, these revised and more precise stellar parameters should be considered when assessing the properties of TRAPPIST-1 planets.

Modelling the base of the solar convective envelope is a tedious problem. Since the first rotation inversions, solar modellers are confronted with the fact that a region of very limited extent has an enormous physical impact on the Sun. Indeed, it is the transition region from differential to solid body rotation, the tachocline, which furthermore is influenced by turbulence and is also supposed to be the seat of the solar magnetic dynamo. Moreover, solar models show significant disagreement with the sound speed profile in this region. In this paper, we show how helioseismology can provide further constraints on this region by carrying out an inversion of the Ledoux discriminant. We compare these inversions for Standard Solar Models built using various opacity tables and chemical abundances and discuss the origins of the discrepancies between Solar Models and the Sun.

The solar metallicity issue is a long-lasting problem of astrophysics, impacting multi- ple fields and still subject to debate and uncertainties. While spectroscopy has mostly been used to determine the solar heavy elements abundance, helioseismologists at- tempted providing a seismic determination of the metallicity in the solar convective enveloppe. However, the puzzle remains since two independent groups prodived two radically different values for this crucial astrophysical parameter. We aim at provid- ing an independent seismic measurement of the solar metallicity in the convective enveloppe. Our main goal is to help provide new information to break the current stalemate amongst seismic determinations of the solar heavy element abundance. We start by presenting the kernels, the inversion technique and the target function of the inversion we have developed. We then test our approach in multiple hare-and-hounds exercises to assess its reliability and accuracy. We then apply our technique to solar data using calibrated solar models and determine an interval of seismic measurements for the solar metallicity. We show that our inversion can indeed be used to estimate the solar metallicity thanks to our hare-and-hounds exercises. However, we also show that further dependencies in the physical ingredients of solar models lead to a low accuracy. Nevertheless, using various physical ingredients for our solar models, we determine metallicity values between 0.008 and 0.014.

The Sun is the most constrained and well-studied of all stars. As a consequence, the physical ingredients entering solar models are used as a reference to study all other stars observed in the Universe. However, our understanding of the solar structure is still imperfect, as illustrated by the current debate on the heavy element abundances in the Sun. We wish to provide additional information on the solar structure by carrying out structural inversions of a new physical quantity, a proxy of the entropy of the solar plasma which properties are very sensitive to the temperature gradient below the convective zone. We use new structural kernels to carry out direct inversions of an entropy proxy of the solar plasma and compare the solar structure to various standard solar models built using various opacity tables and chemical abundances. We also link our results to classical tests commonly found in the literature. Our analysis allows us to probe more efficiently the uncertain regions of the solar models, just below the convective zone, paving the way for new in-depth analyses of the Sun taking into account additional physical uncertainties of solar models beyond the specific question of chemical abundances.

Regions of rapid variation in the internal structure of a star are often referred to as acoustic glitches since they create a characteristic periodic signature in the frequencies of p modes. Here we examine the localized disturbance arising from the helium second ionization zone in red giant branch and clump stars. More specifically, we determine how accurately and precisely the parameters of the ionization zone can be obtained from the oscillation frequencies of stellar models. We use models produced by three different generation codes that not only cover a wide range of stages of evolution along the red giant phase but also incorporate different initial helium abundances. We discuss the conditions under which such fits robustly and accurately determine the acoustic radius of the second ionization zone of helium. The determined radii of the ionization zones as inferred from the mode frequencies were found to be coincident with the local maximum in the first adiabatic exponent described by the models, which is associated with the outer edge of the second ionization zone of helium. Finally, we consider whether this method can be used to distinguish stars with different helium abundances. Although a definite trend in the amplitude of the signal is observed any distinction would be difficult unless the stars come from populations with vastly different helium abundances or the uncertainties associated with the fitted parameters can be reduced. However, application of our methodology could be useful for distinguishing between different populations of red giant stars in globular clusters, where distinct populations with very different helium abundances have been observed.

Super-Earths transiting nearby bright stars are key objects that simultaneously allow for accurate measurements of both their mass and radius, providing essential constraints on their internal composition. We present here the confirmation, based on Spitzer transit observations, that the super-Earth HD 97658 b transits its host star. HD 97658 is a low-mass ($M_*=0.77\pm0.05\,M_{\odot}$) K1 dwarf, as determined from the Hipparcos parallax and stellar evolution modeling. To constrain the planet parameters, we carry out Bayesian global analyses of Keck-HIRES radial velocities, and MOST and Spitzer photometry. HD 97658 b is a massive ($M_P=7.55^{+0.83}_{-0.79} M_{\oplus}$) and large ($R_{P} = 2.247^{+0.098}_{-0.095} R_{\oplus}$ at 4.5 $\mu$m) super-Earth. We investigate the possible internal compositions for HD 97658 b. Our results indicate a large rocky component, by at least 60% by mass, and very little H-He components, at most 2% by mass. We also discuss how future asteroseismic observations can improve the knowledge of the HD 97658 system, in particular by constraining its age. Orbiting a bright host star, HD 97658 b will be a key target for coming space missions TESS, CHEOPS, PLATO, and also JWST, to characterize thoroughly its structure and atmosphere.

Uncertainties on central mixing in main sequence (MS) and core He-burning (He-B) phases affect key predictions of stellar evolution such as late evolutionary phases, chemical enrichment, ages etc. We propose a test of the extension of extra-mixing in two relevant evolutionary phases based on period spacing Delta_P of solar-like oscillating giants. From stellar models and their corresponding adiabatic frequencies (respectively computed with ATON and LOSC codes) we provide the first predictions of the observable Delta_P for stars in the red giant branch (RGB) and in the red clump (RC). We find: i) a clear correlation between Delta_P and the mass of the helium core (M_He); the latter in intermediate-mass stars depends on the MS overshooting, hence it can be used to set constraints on extra mixing during MS when coupled with chemical composition; ii) a linear dependence of the average value of the asymptotic period spacing (<Delta_P>_a) during the He-B phase on the size of the convective core. A first comparison with the inferred asymptotic period spacing for Kepler RC stars suggests the need for extra mixing also during this phase, as evinced from other observational facts.

It is well known that asteroseismology is the unique technique permitting the study of the internal structure of pulsating stars using their pulsational frequencies, which is per se very important. It acquires an additional value when the star turns out to be a planet host. In this case, the asteroseismic study output may be a very important input for the study of the planetary system. With this in mind, we use the large time-span of the Kepler public data obtained for the star system HAT-P-7, first to perform an asteroseismic study of the pulsating star using Time-Dependent-Convection (TDC) models. Secondly, we make a revision of the planet properties in the light of the asteroseismic study.

Adiabatic modeling of solar-like oscillations cannot exceed a certain level of precision for fitting individual frequencies. This is known as the problem of near surface effects on the mode physics. We present a theoretical study which addresses the problem of frequency precision in non-adiabatic models using a time-dependent convection treatment. We find that the number of acceptable model solutions is significantly reduced and more precise constraints can be imposed on the models. Results obtained for a specific star (beta Hydri) lead to very good agreement with both global and local seismic observables. This indicates that the accuracy of model fitting to seismic data is greatly improved when a more complete description of the interaction between convection and pulsation is taken into account.

Since the detection of non-radial solar-like oscillation modes in red giants with the CoRoT satellite, the interest in the asteroseismic properties of red giants and the link with their global properties and internal structure is substantially increasing. Moreover, more and more precise data are being collected with the space-based telescopes CoRoT and Kepler. In this paper we present a survey of the most relevant theoretical and observational results obtained up to now concerning the potential of solar-like oscillations in red giants.

The clear detection with CoRoT and KEPLER of radial and non-radial solar-like oscillations in many red giants paves the way to seismic inferences on the structure of such stars. We present an overview of the properties of the adiabatic frequencies and frequency separations of radial and non-radial oscillation modes, highlighting how their detection allows a deeper insight into the properties of the internal structure of red giants. In our study we consider models of red giants in different evolutionary stages, as well as of different masses and chemical composition. We describe how the large and small separations computed with radial modes and with non-radial modes mostly trapped in the envelope depend on the stellar global parameters and evolutionary state, and we compare our theoretical predictions and first KEPLER data.Finally, we find that the properties of dipole modes constitute a promising seismic diagnostic of the evolutionary state of red-giant stars.

The clear detection with CoRoT and KEPLER of radial and non-radial solar-like oscillations in many red giants paves the way to seismic inferences on the structure of such stars. We present an overview of the properties of the adiabatic frequencies and frequency separations of radial and non-radial oscillation modes for an extended grid of models. We highlight how their detection allows a deeper insight into the internal structure and evolutionary state of red giants. In particular, we find that the properties of dipole modes constitute a promising seismic diagnostic tool of the evolutionary state of red-giant stars. We compare our theoretical predictions with the first 34 days of KEPLER data and predict the frequency diagram expected for red giants in the COROT exofield in the galactic center direction.

The availability of precisely determined frequencies of radial and non-radial oscillation modes in red giants is finally paving the way for detailed studies of the internal structure of these stars. We look for the seismic signature of regions of sharp structure variation in the internal structure of the CoRoT target HR7349. We analyse the frequency dependence of the large frequency separation and second frequency differences, as well as the behaviour of the large frequency separation obtained with the envelope auto-correlation function. We find evidence for a periodic component in the oscillation frequencies, i.e. the seismic signature of a sharp structure variation in HR7349. In a comparison with stellar models we interpret this feature as caused by a local depression of the sound speed that occurs in the helium second-ionization region. Using solely seismic constraints this allows us to estimate the mass (M=1.2^{+0.6}_{-0.4} Msun) and radius (R=12.2^{+2.1}_{-1.8} Rsun) of HR7349, which agrees with the location of the star in an HR diagram.

Seismology of stars provides insight into the physical mechanisms taking place in their interior, with modes of oscillation probing different layers. Low-amplitude acoustic oscillations excited by turbulent convection were detected four decades ago in the Sun and more recently in low-mass main-sequence stars. Using data gathered by the Convection Rotation and Planetary Transits mission, we report here on the detection of solar-like oscillations in a massive star, V1449 Aql, which is a known large-amplitude (b Cephei) pulsator.

There are many unknowns in the formation of subdwarf B stars. Different formation channels are considered to be possible and to lead to a variety of helium-burning subdwarfs. All seismic models to date, however, assume that a subdwarf B star is a post-helium-flash-core surrounded by a thin inert layer of hydrogen. We examine an alternative formation channel, in which the subdwarf B star originates from a massive (>~2 Msun) red giant with a non-degenerate helium-core. Although these subdwarfs may evolve through the same region of the log g-Teff diagram as the canonical post-flash subdwarfs, their interior structure is rather different. We examine how this difference affects their pulsation modes and whether it can be observed. Using detailed stellar evolution calculations we construct subdwarf B models from both formation channels. The iron accumulation in the driving region due to diffusion, which causes the excitation of the modes, is approximated by a Gaussian function. The pulsation modes and frequencies are calculated with a non-adiabatic pulsation code. A detailed comparison of two subdwarf B models from different channels, but with the same log g and Teff, shows that their mode excitation is different. The excited frequencies are lower for the post-flash than for the post-non-degenerate subdwarf B star. This is mainly due to the differing chemical composition of the stellar envelope. A more general comparison between two grids of models shows that the excited frequencies of most post-non-degenerate subdwarfs cannot be well-matched with the frequencies of post-flash subdwarfs. In the rare event that an acceptable seismic match is found, additional information, such as mode identification and log g and Teff determinations, allows us to distinguish between the two formation channels.

The forthcoming data expected from space missions such as CoRoT require the capacity of the available tools to provide accurate models whose numerical precision is well above the expected observational errors. In order to secure that these tools meet the specifications, a team has been established to test and, when necessary, to improve the codes available in the community. The CoRoT evolution and seismic tool activity (ESTA) has been set up with this mission. Several groups have been involved. The present paper describes the motivation and the organisation of this activity, providing the context and the basis for the presentation of the results that have been achieved so far. This is not a finished task as future even better data will continue to demand more precise and complete tools for asteroseismology.

This contribution is not about the quality of the agreement between stellar models computed by CESAM and CLES codes, but more interesting, on what ESTA-Task~1 run has taught us about these codes and about the input physics they use. We also quantify the effects of different implementations of the same physics on the seismic properties of the stellar models, that in fact is the main aim of ESTA experiments.

We present a grid of stellar models, obtained with the CLES evolution code, following the specification of ESTA-Task1, and the corresponfing seismic properties, computed with the LOSC code. We provide a complete description of the corresponding files that will be available on the ESTA web-pages.

The Liege Oscillation code can be used as a stand-alone program or as a library of subroutines that the user calls from a Fortran main program of his own to compute radial and non-radial adiabatic oscillations of stellar models. We describe the variables and the equations used by the program and the methods used to solve them. A brief account is given of the use and the output of the program.

Cles is an evolution code recently developed to produce stellar models meeting the specific requirements of studies in asteroseismology. It offers the users a lot of choices in the input physics they want in their models and its versatility allows them to tailor the code to their needs and implement easily new features. We describe the features implemented in the current version of the code and the techniques used to solve the equations of stellar structure and evolution. A brief account is given of the use of the program and of a solar calibration realized with it.

In order to make astroseismology a powerful tool to explore stellar interiors, different numerical codes should give the same oscillation frequencies for the same input physics. This work is devoted to test, compare and, if needed, optimize the seismic codes used to calculate the eigenfrequencies to be finally compared with observations. The oscillation codes of nine research groups in the field have been used in this study. The same physics has been imposed for all the codes in order to isolate the non-physical dependence of any possible difference. Two equilibrium models with different grids, 2172 and 4042 mesh points, have been used, and the latter model includes an explicit modelling of semiconvection just outside the convective core. Comparing the results for these two models illustrates the effect of the number of mesh points and their distribution in particularly critical parts of the model, such as the steep composition gradient outside the convective core. A comprehensive study of the frequency differences found for the different codes is given as well. These differences are mainly due to the use of different numerical integration schemes. The use of a second-order integration scheme plus a Richardson extrapolation provides similar results to a fourth-order integration scheme. The proper numerical description of the Brunt-Vaisala frequency in the equilibrium model is also critical for some modes. An unexpected result of this study is the high sensitivity of the frequency differences to the inconsistent use of values of the gravitational constant (G) in the oscillation codes, within the range of the experimentally determined ones, which differ from the value used to compute the equilibrium model.

We present a seismic study of the beta Cephei star theta Ophiuchi. Our analysis is based on the observation of one radial mode, one rotationally split l = 1 triplet and three components of a rotationally split l = 2 quintuplet for which the m-values were well identified by spectroscopy. We identify the radial mode as fundamental, the triplet as p_1 and the quintuplet as g_1. Our NLTE abundance analysis results in a metallicity and CNO abundances in full agreement with the most recent updated solar values. With X \in [0.71,0.7211] and Z \in [0.009,0.015], and using the Asplund et al. (2005) mixture but with a Ne abundance about 0.3 dex larger (Cunha et al. 2006), the matching of the three independent modes, enables us to deduce constrained ranges for the mass (M = 8.2 +/- 0.3 Msun) and central hydrogen abundance (X_c = 0.38 +/- 0.02) of theta Oph and to prove the occurrence of core overshooting (alpha_ov = 0.44 +/- 0.07). We also derive an equatorial rotation velocity of 29 +/- 7 km/s. Moreover, we show that the observed non-equidistance of the l=1 triplet can be reproduced by second order effects of rotation. Finally, we show that the observed rotational splitting of two modes cannot rule out a rigid rotation model.

We present the work undertaken by the Evolution and Seismic Tools Activity (ESTA) team of the CoRoT Seismology Working Group. We have focused on two main tasks: Task 1 - now finished - has aimed at testing, comparing and optimising seven stellar evolution codes which will be used to model the internal structure and evolution of the CoRoT target stars. Task 2, still underway, aims at testing, comparing and optimising different seismic codes used to calculate the oscillations of models for different types of stars. The results already obtained are quite satisfactory, showing minor differences between the different numerical tools provided the same assumptions on the physical parameters are made. This work gives us confidence on the numerical tools that will be available to interpret the future CoRoT seismic data.

We re-classified 31 variable B stars which were observed more than 50 times in the Geneva photometric system with the P7 photometer attached to the MERCATOR telescope (La Palma) during its first 3 years of scientific observations. HD89688 is a possible beta Cephei/slowly pulsating B star hybrid and the main mode of the COROT target HD180642 shows non-linear effects. The Maia candidates are re-classified as either ellipsoidal variables or spotted stars. Although the mode identification is still ongoing, all the well-identified modes so far have a degree l = 0, 1 or 2.

Models of alpha Cen A & B have been computed using the masses determined by Pourbaix et al. (2002) and the data derived from the spectroscopic analysis of Neuforge and Magain (1997). The seismological data obtained by Bouchy and Carrier (2001, 2002) do help improve our knowledge of the evolutionary status of the system. All the constraints are satisfied with a model which gives an age of about 6 Gyr for the binary.

We present an improved version of the method of photometric mode identification of Heynderickx et al. (1994). Our new version is based on the inclusion of precise non-adiabatic eigenfunctions determined in the outer stellar atmosphere according to the formalism recently proposed by Dupret et al.(2002). Our improved photometric mode identification technique is therefore no longer dependent on ad hoc parameters for the non-adiabatic effects. It contains the complete physical conditions of the outer atmosphere of the star, provided that rotation does not play a key role. We apply our improved method to the two slowly pulsating B stars HD 74560 and HD 138764 and to the beta Cephei star EN (16) Lac. Besides identifying the degree l of the pulsating stars, our method is also a tool for improving the knowledge of stellar interiors and atmospheres, by imposing constraints on parameters such as the metallicity and the mixing-length parameter alpha (a procedure we label non-adiabatic asteroseismology).