Normalized to: Schwab, T.
[1]
oai:arXiv.org:2001.04510 [pdf] - 2054159
A NECTAr-based upgrade for the Cherenkov cameras of the H.E.S.S.
12-meter telescopes
Ashton, Terry;
Backes, Michael;
Balzer, Arnim;
Berge, David;
Bolmont, Julien;
Bonnefoy, Simon;
Brun, Francois;
Chaminade, Thomas;
Delagnes, Eric;
Fontaine, Gerard;
Füßling, Matthias;
Giavitto, Gianluca;
Giebels, Berrie;
Glicenstein, Jean-Francois;
Gräber, Tobias;
Hinton, Jim;
Jahnke, Albert;
Klepser, Stefan;
Kossatz, Marko;
Kretzschmann, Axel;
Lefranc, Valentin;
Leich, Holger;
Lenain, Jean-Philippe;
Lüdecke, Hartmut;
Lypova, Iryna;
Manigot, Pascal;
Marandon, Vincent;
Moulin, Emmanuel;
Murach, Thomas;
de Naurois, Mathieu;
Nayman, Patrick;
Ohm, Stefan;
Penno, Marek;
Ross, Duncan;
Salek, David;
Schade, Markus;
Schwab, Thomas;
Shiningayamwe, Kleopas;
Stegmann, Christian;
Steppa, Constantin;
Tavernet, Jean-Paul;
Thornhill, Julian;
Toussnel, Francois;
Vincent, Pascal
Submitted: 2020-01-13
The High Energy Stereoscopic System (H.E.S.S.) is one of the three arrays of
imaging atmospheric Cherenkov telescopes (IACTs) currently in operation. It is
composed of four 12-meter telescopes and a 28-meter one, and is sensitive to
gamma rays in the energy range ~30 GeV - 100 TeV. The cameras of the 12-m
telescopes recently underwent a substantial upgrade, with the goal of improving
their performance and robustness. The upgrade involved replacing all camera
components except for the photomultiplier tubes (PMTs). This meant developing
new hardware for the trigger, readout, power, cooling and mechanical systems,
and new software for camera control and data acquisition. Several novel
technologies were employed in the cameras: the readout is built around the new
NECTAr digitizer chip, developed for the next generation of IACTs; the camera
electronics is fully controlled and read out via Ethernet using a combination
of FPGA and embedded ARM computers; the software uses modern libraries such as
Apache Thrift, ZMQ and Protocol buffers. This work describes in detail the
design and the performance of the upgraded cameras.
[2]
oai:arXiv.org:1907.09220 [pdf] - 1920228
Trigger performance verification of the FlashCam prototype camera
Sailer, S.;
Werner, F.;
Hermann, G.;
Barcelo, M.;
Bauer, C.;
Bernhard, S.;
Biegger, M.;
Canelli, F.;
Capasso, M.;
Diebold, S.;
Eisenkolb, F.;
Eschbach, S.;
Florin, D.;
Föhr, C.;
Funk, S.;
Gadola, A.;
Garrecht, F.;
Jung, I.;
Kalekin, O.;
Kalkuhl, C.;
Kihm, T.;
Lahmann, R.;
Pfeifer, M.;
Principe, G.;
Pühlhofer, G.;
Pürckhauer, S.;
Reimer, O.;
Santangelo, A.;
Scalici, M.;
Schanz, T.;
Schwab, T.;
Steiner, S.;
Straumann, U.;
Tenzer, C.;
Vollhardt, A.;
Wolf, D.
Submitted: 2019-07-22
FlashCam is a camera proposed for the medium-sized telescopes of the
Cherenkov Telescope Array (CTA). We compare camera trigger rates obtained from
measurements with the camera prototype in the laboratory and Monte-Carlo
simulations, when scanning the parameter space of the fully-digital trigger
logic and the intensity of a continuous light source mimicking the night sky
background (NSB) during on-site operation. The comparisons of the measured data
results to the Monte-Carlo simulations are used to verify the FlashCam trigger
logic and the expected trigger performance.
[3]
oai:arXiv.org:1708.04550 [pdf] - 1783695
Performance of the upgraded H.E.S.S. cameras
Bonnefoy, S.;
Ashton, T.;
Backes, M.;
Balzer, A.;
Berge, D.;
Brun, F.;
Chaminade, T.;
Delagnes, E.;
Fontaine, G.;
Füßling, M.;
Giavitto, G.;
Giebels, B.;
Glicenstein, J. F.;
Gräber, T.;
Hinton, J. A.;
Jahnke, A.;
Klepser, S.;
Kossatz, M.;
Kretzschmann, A.;
Lefranc, V.;
Leich, H.;
Lenain, J. P.;
Lüdecke, H.;
Lypova, I.;
Manigot, P.;
Marandon, V.;
Moulin, E.;
de Naurois, M.;
Nayman, P.;
Ohm, S.;
Penno, M.;
Ross, D.;
Salek, D.;
Schade, M.;
Schwab, T.;
Shiningayamwe, K.;
Stegmann, C.;
Steppa, C.;
Thornhill, J.;
Toussenel, F.
Submitted: 2017-08-15
The 14 years old cameras of the H.E.S.S. 12-m telescopes have been upgraded
in 2015/2016, with the goals of reducing the system failure rate, reducing the
dead time and improving the overall performance of the array. This conference
contribution describes the various tests that were carried out on the cameras
and their sub-components both in the lab and on site. It also gives an overview
of the commissioning and calibration procedures adopted during and after the
installation, including e.g. flat-fielding and trigger threshold scans.
Finally, it reports in detail about the overall performance of the four new
H.E.S.S. I cameras, using very recent data.
[4]
oai:arXiv.org:1707.04415 [pdf] - 1779472
Hardware and software architecture of the upgraded H.E.S.S. cameras
Klepser, S.;
Ashton, T.;
Backes, M.;
Balzer, A.;
Berge, D.;
Bonnefoy, S.;
Brun, F.;
Chaminade, T.;
Delagnes, E.;
Fontaine, G.;
Füßling, M.;
Giavitto, G.;
Giebels, B.;
Glicenstein, J. F.;
Gräber, T.;
Hinton, J. A.;
Jahnke, A.;
Kossatz, M.;
Kretzschmann, A.;
Lefranc, V.;
Leich, H.;
Lenain, J. P.;
Lüdecke, H.;
Lypova, I.;
Manigot, P.;
Marandon, V.;
Moulin, E.;
de Naurois, M.;
Nayman, P.;
Ohm, S.;
Penno, M.;
Ross, D.;
Salek, D.;
Schade, M.;
Schwab, T.;
Shiningayamwe, K.;
Stegmann, C.;
Steppa, C.;
Thornhill, J.;
Toussenel, F.
Submitted: 2017-07-14
In 2015/16, the photomultiplier cameras of the H.E.S.S. Cherenkov telescopes
CT1-4 have undergone a major upgrade. The entire electronics has been replaced,
using NECTAr chips for the front-end readout. A new ventilation system has been
installed and several auxiliary components have been replaced. Besides this,
the internal control and readout software was rewritten from scratch in a
modern and modular way. Ethernet technology was used wherever possible to
ensure both flexibility, stability and high bandwidth. An overview of the
installed components will be given.
[5]
oai:arXiv.org:1612.09528 [pdf] - 1533980
Performance Verification of the FlashCam Prototype Camera for the
Cherenkov Telescope Array
Werner, F.;
Bauer, C.;
Bernhard, S.;
Capasso, M.;
Diebold, S.;
Eisenkolb, F.;
Eschbach, S.;
Florin, D.;
Föhr, C.;
Funk, S.;
Gadola, A.;
Garrecht, F.;
Hermann, G.;
Jung, I.;
Kalekin, O.;
Kalkuhl, C.;
Kasperek, J.;
Kihm, T.;
Lahmann, R.;
Marszalek, A.;
Pfeifer, M.;
Principe, G.;
Pühlhofer, G.;
Pürckhauer, S.;
Rajda, P. J.;
Reimer, O.;
Santangelo, A.;
Schanz, T.;
Schwab, T.;
Steiner, S.;
Straumann, U.;
Tenzer, C.;
Vollhardt, A.;
Wolf, D.;
Zietara, K.
Submitted: 2016-12-30
The Cherenkov Telescope Array (CTA) is a future gamma-ray observatory that is
planned to significantly improve upon the sensitivity and precision of the
current generation of Cherenkov telescopes. The observatory will consist of
several dozens of telescopes with different sizes and equipped with different
types of cameras. Of these, the FlashCam camera system is the first to
implement a fully digital signal processing chain which allows for a traceable,
configurable trigger scheme and flexible signal reconstruction. As of autumn
2016, a prototype FlashCam camera for the medium-sized telescopes of CTA nears
completion. First results of the ongoing system tests demonstrate that the
signal chain and the readout system surpass CTA requirements. The stability of
the system is shown using long-term temperature cycling.
[8]
oai:arXiv.org:1509.02434 [pdf] - 1938108
FlashCam: a fully-digital camera for the medium-sized telescopes of the
Cherenkov Telescope Array
Pühlhofer, G.;
Bauer, C.;
Bernhard, S.;
Capasso, M.;
Diebold, S.;
Eisenkolb, F.;
Florin, D.;
Föhr, C.;
Funk, S.;
Gadola, A.;
Garrecht, F.;
Hermann, G.;
Jung, I.;
Kalekin, O.;
Kalkuhl, C.;
Kasperek, J.;
Kihm, T.;
Lahmann, R.;
Manalaysay, A.;
Marszalek, A.;
Pfeifer, M.;
Rajda, P. J.;
Reimer, O.;
Santangelo, A.;
Schanz, T.;
Schwab, T.;
Steiner, S.;
Straumann, U.;
Tenzer, C.;
Vollhardt, A.;
Weitzel, Q.;
Werner, F.;
Wolf, D.;
Zietara, K.
Submitted: 2015-09-08
The FlashCam group is currently preparing photomultiplier-tube based cameras
proposed for the medium-sized telescopes (MST) of the Cherenkov Telescope Array
(CTA). The cameras are designed around the FlashCam readout concept which is
the first fully-digital readout system for Cherenkov cameras, based on
commercial FADCs and FPGAs as key components for the front-end electronics
modules and a high performance camera server as back-end. This contribution
describes the progress of the full-scale FlashCam camera prototype currently
under construction, as well as performance results also obtained with earlier
demonstrator setups. Plans towards the production and implementation of
FlashCams on site are also briefly presented.
[9]
oai:arXiv.org:1509.01232 [pdf] - 1271229
A major electronics upgrade for the H.E.S.S. Cherenkov telescopes 1-4
Giavitto, G.;
Ashton, T.;
Balzer, A.;
Berge, D.;
Brun, F.;
Chaminade, T.;
Delagnes, E.;
Fontaine, G.;
Füßling, M.;
Giebels, B.;
Glicenstein, J. F.;
Gräber, T.;
Hinton, J. A.;
Jahnke, A.;
Klepser, S.;
Kossatz, M.;
Kretzschmann, A.;
Lefranc, V.;
Leich, H.;
Lüdecke, H.;
Manigot, P.;
Marandon, V.;
Moulin, E.;
de, M.;
Nayman, P.;
Penno, M.;
Ross, D.;
Salek, D.;
Schade, M.;
Schwab, T.;
Simoni, R.;
Stegmann, C.;
Thornhill, J.;
Toussenel, F.
Submitted: 2015-09-03
The High Energy Stereoscopic System (H.E.S.S.) is an array of imaging
atmospheric Cherenkov telescopes (IACTs) located in the Khomas Highland in
Namibia. It consists of four 12-m telescopes (CT1-4), which started operations
in 2003, and a 28-m diameter one (CT5), which was brought online in 2012. It is
the only IACT system featuring telescopes of different sizes, which provides
sensitivity for gamma rays across a very wide energy range, from ~30 GeV up to
~100 TeV. Since the camera electronics of CT1-4 are much older than the one of
CT5, an upgrade is being carried out; first deployment was in 2015, full
operation is planned for 2016. The goals of this upgrade are threefold:
reducing the dead time of the cameras, improving the overall performance of the
array and reducing the system failure rate related to aging. Upon completion,
the upgrade will assure the continuous operation of H.E.S.S. at its full
sensitivity until and possibly beyond the advent of CTA. In the design of the
new components, several CTA concepts and technologies were used and are thus
being evaluated in the field: The upgraded read-out electronics is based on the
NECTAR readout chips; the new camera front- and back-end control subsystems are
based on an FPGA and an embedded ARM computer; the communication between
subsystems is based on standard Ethernet technologies. These hardware solutions
offer good performance, robustness and flexibility. The design of the new
cameras is reported here.