Normalized to: Schmoll, J.
[1]
oai:arXiv.org:2004.10764 [pdf] - 2119951
Download by Parachute: Retrieval of Assets from High Altitude Balloons
Sirks, E. L.;
Clark, P.;
Massey, R. J.;
Benton, S. J.;
Brown, A. M.;
Damaren, C. J.;
Eifler, T.;
Fraisse, A. A.;
Frenk, C.;
Funk, M.;
Galloway, M. N.;
Gill, A.;
Hartley, J. W.;
Holder, B.;
Huff, E. M.;
Jauzac, M.;
Jones, W. C.;
Lagattuta, D.;
Leung, J. S. -Y.;
Li, L.;
Luu, T. V. T.;
McCleary, J.;
Nagy, J. M.;
Netterfield, C. B.;
Redmond, S.;
Rhodes, J. D.;
Romualdez, L. J.;
Schmoll, J.;
Shaaban, M. M.;
Tam, S. -I.
Submitted: 2020-04-22
We present a publicly-available toolkit of flight-proven hardware and
software to retrieve 5 TB of data or small physical samples from a
stratospheric balloon platform. Before launch, a capsule is attached to the
balloon, and rises with it. Upon remote command, the capsule is released and
descends via parachute, continuously transmitting its location. Software to
predict the trajectory can be used to select a safe but accessible landing
site. We dropped two such capsules from the SuperBIT telescope, in September
2019. The capsules took ~37 minutes to descend from ~30 km altitude. They
drifted 32 km and 19 km horizontally, but landed within 300 m and 600 m of
their predicted landing sites. We found them easily, and successfully recovered
the data. We welcome interest from other balloon teams for whom the technology
would be useful.
[2]
oai:arXiv.org:1911.11210 [pdf] - 2108968
Robust diffraction-limited NIR-to-NUV wide-field imaging from
stratospheric balloon-borne platforms -- SuperBIT science telescope
commissioning flight & performance
Romualdez, L. Javier;
Benton, Steven J.;
Brown, Anthony M.;
Clark, Paul;
Damaren, Christopher J.;
Eifler, Tim;
Fraisse, Aurelien A.;
Galloway, Mathew N.;
Gill, Ajay;
Hartley, John W.;
Holder, Bradley;
Huff, Eric M.;
Jauzac, Mathilde;
Jones, William C.;
Lagattuta, David;
Leung, Jason S. -Y.;
Li, Lun;
Luu, Thuy Vy T.;
Massey, Richard J.;
McCleary, Jacqueline;
Mullaney, James;
Nagy, Johanna M.;
Netterfield, C. Barth;
Redmond, Susan;
Rhodes, Jason D.;
Schmoll, Jürgen;
Shaaban, Mohamed M.;
Sirks, Ellen;
Tam, Sut-Ieng
Submitted: 2019-11-25
At a fraction the total cost of an equivalent orbital mission, scientific
balloon-borne platforms, operating above 99.7% of the Earth's atmosphere, offer
attractive, competitive, and effective observational capabilities -- namely
space-like resolution, transmission, and backgrounds -- that are well suited
for modern astronomy and cosmology. SuperBIT is a diffraction-limited,
wide-field, 0.5 m telescope capable of exploiting these observing conditions in
order to provide exquisite imaging throughout the near-IR to near-UV. It
utilizes a robust active stabilization system that has consistently
demonstrated a 1 sigma sky-fixed pointing stability at 48 milliarcseconds over
multiple 1 hour observations at float. This is achieved by actively tracking
compound pendulations via a three-axis gimballed platform, which provides
sky-fixed telescope stability at < 500 milliarcseconds and corrects for field
rotation, while employing high-bandwidth tip/tilt optics to remove residual
disturbances across the science imaging focal plane. SuperBIT's performance
during the 2019 commissioning flight benefited from a customized high-fidelity
science-capable telescope designed with exceptional thermo- and opto-mechanical
stability as well as tightly constrained static and dynamic coupling between
high-rate sensors and telescope optics. At the currently demonstrated level of
flight performance, SuperBIT capabilities now surpass the science requirements
for a wide variety of experiments in cosmology, astrophysics and stellar
dynamics.
[3]
oai:arXiv.org:1811.03383 [pdf] - 1791342
Design and production of the DESI fibre cables
Schmoll, Jürgen;
Besuner, Robert;
Bramall, David;
Brooks, David;
Edelstein, Jerry;
Jelinsky, Patrick;
Levi, Michael;
Murray, Graham;
Poppett, Claire;
Sharples, Ray;
Tyas, Luke;
Schlegel, David
Submitted: 2018-11-08
The Dark Energy Spectroscopic Instrument (DESI) is under construction to
measure the expansion history of the Universe using the Baryonic Acoustic
Oscillation technique. The spectra of 35 million galaxies and quasars over
14000 sq deg will be measured during the life of the experiment. A new prime
focus corrector for the KPNO Mayall telescope will deliver light to 5000 fibre
optic positioners. The fibres in turn feed 10 broad-band spectrographs. We will
describe the design and production progress on the fibre cables, strain relief
system and preparation of the slit end. In contrast to former projects, the
larger scale of production required for DESI requires teaming up with industry
to find a solution to reduce the time scale of production as well as to
minimise the stress on the optical fibres.
[4]
oai:arXiv.org:1807.09869 [pdf] - 1723027
Auto-tuned thermal control on stratospheric balloon experiments
Redmond, S.;
Benton, S. J.;
Brown, A. M.;
Clark, P.;
Damaren, C. J.;
Eifler, T.;
Fraisse, A. A.;
Galloway, M. N.;
Hartley, J. W.;
Jauzac, M.;
Jones, W. C.;
Li, L.;
Luu, T. V. T.;
Massey, R. J.;
Mccleary, J.;
Netterfield, C. B.;
Padilla, I. L.;
Rhodes, J. D.;
Romualdez, L. J.;
Schmoll, J.;
Tam, S.
Submitted: 2018-07-25
Balloon-borne telescopes present unique thermal design challenges which are a
combination of those present for both space and ground telescopes. At altitudes
of 35-40 km, convection effects are minimal and difficult to characterize.
Radiation and conduction are the predominant heat transfer mechanisms reducing
the thermal design options. For long duration flights payload mass is a
function of power consumption making it an important optimization parameter.
SuperBIT, or the Super-pressure Balloon-borne Imaging Telescope, aims to study
weak lensing using a 0.5m modified Dall-Kirkham telescope capable of achieving
0.02" stability and capturing deep exposures from visible to near UV
wavelengths. To achieve the theoretical stratospheric diffraction-limited
resolution of 0.25", mirror deformation gradients must be kept to within 20nm.
The thermal environment must thus be stable on time scales of an hour and the
thermal gradients must be minimized on the telescope. SuperBIT plans to
implement two types of parameter solvers; one to validate the thermal design
and the other to tightly control the thermal environment.
[5]
oai:arXiv.org:1807.02887 [pdf] - 1712304
Overview, design, and flight results from SuperBIT: a high-resolution,
wide-field, visible-to-near-UV balloon-borne astronomical telescope
Romualdez, L. Javier;
Benton, Steven J.;
Brown, Anthony M.;
Clark, Paul;
Damaren, Christopher J.;
Eifler, Tim;
Fraisse, Aurelien A.;
Galloway, Mathew N.;
Hartley, John W.;
Jauzac, Mathilde;
Jones, William C.;
Li, Lun;
Luu, Thuy Vy T.;
Massey, Richard J.;
Mccleary, Jacqueline;
Netterfield, C. Barth;
Redmond, Susan;
Rhodes, Jason D.;
Schmoll, Jürgen;
Tam, Sut-Ieng
Submitted: 2018-07-08
Balloon-borne astronomy is a unique tool that allows for a level of image
stability and significantly reduced atmospheric interference without the often
prohibitive cost and long development time-scale that are characteristic of
space-borne facility-class instruments. The Super-pressure Balloon-borne
Imaging Telescope (SuperBIT) is a wide-field imager designed to provide 0.02"
image stability over a 0.5 degree field-of-view for deep exposures within the
visible-to-near-UV (300-900 um). As such, SuperBIT is a suitable platform for a
wide range of balloon-borne observations, including solar and extrasolar
planetary spectroscopy as well as resolved stellar populations and distant
galaxies. We report on the overall payload design and instrumentation
methodologies for SuperBIT as well as telescope and image stability results
from two test flights. Prospects for the SuperBIT project are outlined with an
emphasis on the development of a fully operational, three-month science flight
from New Zealand in 2020.
[8]
oai:arXiv.org:1610.01452 [pdf] - 1580337
Inauguration and First Light of the GCT-M Prototype for the Cherenkov
Telescope Array
Watson, J. J.;
De Franco, A.;
Abchiche, A.;
Allan, D.;
Amans, J. -P.;
Armstrong, T. P.;
Balzer, A.;
Berge, D.;
Boisson, C.;
Bousquet, J. -J.;
Brown, A. M.;
Bryan, M.;
Buchholtz, G.;
Chadwick, P. M.;
Costantini, H.;
Cotter, G.;
Daniel, M. K.;
De Frondat, F.;
Dournaux, J. -L.;
Dumas, D.;
Ernenwein, J. -P.;
Fasola, G.;
Funk, S.;
Gironnet, J.;
Graham, J. A.;
Greenshaw, T.;
Hervet, O.;
Hidaka, N.;
Hinton, J. A.;
Huet, J. -M.;
Jegouzo, I.;
Jogler, T.;
Kraus, M.;
Lapington, J. S.;
Laporte, P.;
Lefaucheur, J.;
Markoff, S.;
Melse, T.;
Mohrmann, L.;
Molyneux, P.;
Nolan, S. J.;
Okumura, A.;
Osborne, J. P.;
Parsons, R. D.;
Rosen, S.;
Ross, D.;
Rowell, G.;
Rulten, C. B.;
Sato, Y.;
Sayéde, F.;
Schmoll, J.;
Schoorlemmer, H.;
Servillat, M.;
Sol, H.;
Stamatescu, V.;
Stephan, M.;
Stuik, R.;
Sykes, J.;
Tajima, H.;
Thornhill, J.;
Tibaldo, L.;
Trichard, C.;
Vink, J.;
White, R.;
Yamane, N.;
Zech, A.;
Zink, A.;
Zorn, J.;
Consortium, the CTA
Submitted: 2016-10-05
The Gamma-ray Cherenkov Telescope (GCT) is a candidate for the Small Size
Telescopes (SSTs) of the Cherenkov Telescope Array (CTA). Its purpose is to
extend the sensitivity of CTA to gamma-ray energies reaching 300 TeV. Its
dual-mirror optical design and curved focal plane enables the use of a compact
camera of 0.4 m diameter, while achieving a field of view of above 8 degrees.
Through the use of the digitising TARGET ASICs, the Cherenkov flash is sampled
once per nanosecond continuously and then digitised when triggering conditions
are met within the analogue outputs of the photosensors. Entire waveforms
(typically covering 96 ns) for all 2048 pixels are then stored for analysis,
allowing for a broad spectrum of investigations to be performed on the data.
Two prototypes of the GCT camera are under development, with differing
photosensors: Multi-Anode Photomultipliers (MAPMs) and Silicon Photomultipliers
(SiPMs). During November 2015, the GCT MAPM (GCT-M) prototype camera was
integrated onto the GCT structure at the Observatoire de Paris-Meudon, where it
observed the first Cherenkov light detected by a prototype instrument for CTA.
[9]
oai:arXiv.org:1610.01398 [pdf] - 1580334
The Gamma-ray Cherenkov Telescope for the Cherenkov Telescope Array
Tibaldo, L.;
Abchiche, A.;
Allan, D.;
Amans, J. -P.;
Armstrong, T. P.;
Balzer, A.;
Berge, D.;
Boisson, C.;
Bousquet, J. -J.;
Brown, A. M.;
Bryan, M.;
Buchholtz, G.;
Chadwick, P. M.;
Costantini, H.;
Cotter, G.;
Daniel, M. K.;
De Franco, A.;
De Frondat, F.;
Dournaux, J. -L.;
Dumas, D.;
Ernenwein, J. -P.;
Fasola, G.;
Funk, S.;
Gironnet, J.;
Graham, J. A.;
Greenshaw, T.;
Hervet, O.;
Hidaka, N.;
Hinton, J. A.;
Huet, J. -M.;
Jankowsky, D.;
Jegouzo, I.;
Jogler, T.;
Kraus, M.;
Lapington, J. S.;
Laporte, P.;
Lefaucheur, J.;
Markoff, S.;
Melse, T.;
Mohrmann, L.;
Molyneux, P.;
Nolan, S. J.;
Okumura, A.;
Osborne, J. P.;
Parsons, R. D.;
Rosen, S.;
Ross, D.;
Rowell, G.;
Rulten, C. B.;
Sato, Y.;
Sayede, F.;
Schmoll, J.;
Schoorlemmer, H.;
Servillat, M.;
Sol, H.;
Stamatescu, V.;
Stephan, M.;
Stuik, R.;
Sykes, J.;
Tajima, H.;
Thornhill, J.;
Trichard, C.;
Vink, J.;
Watson, J. J.;
White, R.;
Yamane, N.;
Zech, A.;
Zink, A.;
Zorn, J.;
Consortium, the CTA
Submitted: 2016-10-05
The Cherenkov Telescope Array (CTA) is a forthcoming ground-based observatory
for very-high-energy gamma rays. CTA will consist of two arrays of imaging
atmospheric Cherenkov telescopes in the Northern and Southern hemispheres, and
will combine telescopes of different types to achieve unprecedented performance
and energy coverage. The Gamma-ray Cherenkov Telescope (GCT) is one of the
small-sized telescopes proposed for CTA to explore the energy range from a few
TeV to hundreds of TeV with a field of view $\gtrsim 8^\circ$ and angular
resolution of a few arcminutes. The GCT design features dual-mirror
Schwarzschild-Couder optics and a compact camera based on densely-pixelated
photodetectors as well as custom electronics. In this contribution we provide
an overview of the GCT project with focus on prototype development and testing
that is currently ongoing. We present results obtained during the first
on-telescope campaign in late 2015 at the Observatoire de Paris-Meudon, during
which we recorded the first Cherenkov images from atmospheric showers with the
GCT multi-anode photomultiplier camera prototype. We also discuss the
development of a second GCT camera prototype with silicon photomultipliers as
photosensors, and plans toward a contribution to the realisation of CTA.
[10]
oai:arXiv.org:1608.03420 [pdf] - 1521294
The GCT camera for the Cherenkov Telescope Array
Brown, Anthony M.;
Abchiche, A.;
Allan, D.;
Amans, J. P.;
Armstrong, T. P.;
Balzer, A.;
Berge, D.;
Boisson, C.;
Bousquet, J. -J.;
Bryan, M.;
Buchholtz, G.;
Chadwick, P. M.;
Costantini, H.;
Cotter, G.;
Daniel, M. K.;
De Franco, A.;
De Frondat, F.;
Dournaux, J. -L.;
Dumas, D.;
Fasola, G.;
Funk, S.;
Gironnet, J.;
Graham, J. A.;
Greenshaw, T.;
Hervet, O.;
Hidaka, N.;
Hinton, J. A.;
Huet, J. -M.;
Jegouzo, I.;
Jogler, T.;
Kraus, M.;
Lapington, J. S.;
Laporte, P.;
Lefaucheur, J.;
Markoff, S.;
Melse, T.;
Mohrmann, L.;
Molyneux, P.;
Nolan, S. J.;
Okumura, A.;
Osborne, J. P.;
Parsons, R. D.;
Rosen, S.;
Ross, D.;
Rowell, G.;
Sato, Y.;
Sayede, F.;
Schmoll, J.;
Schoorlemmer, H.;
Servillat, M.;
Sol, H.;
Stamatescu, V.;
Stephan, M.;
Stuik, R.;
Sykes, J.;
Tajima, H.;
Thornhill, J.;
Tibaldo, L.;
Trichard, C.;
Vink, J.;
Watson, J. J.;
White, R.;
Yamane, N.;
Zech, A.;
Zink, A.;
Zorn, J.
Submitted: 2016-08-11
The Gamma-ray Cherenkov Telescope (GCT) is proposed for the Small-Sized
Telescope component of the Cherenkov Telescope Array (CTA). GCT's dual-mirror
Schwarzschild-Couder (SC) optical system allows the use of a compact camera
with small form-factor photosensors. The GCT camera is ~0.4 m in diameter and
has 2048 pixels; each pixel has a ~0.2 degree angular size, resulting in a wide
field-of-view. The design of the GCT camera is high performance at low cost,
with the camera housing 32 front-end electronics modules providing full
waveform information for all of the camera's 2048 pixels. The first GCT camera
prototype, CHEC-M, was commissioned during 2015, culminating in the first
Cherenkov images recorded by a SC telescope and the first light of a CTA
prototype. In this contribution we give a detailed description of the GCT
camera and present preliminary results from CHEC-M's commissioning.
[11]
oai:arXiv.org:1608.02502 [pdf] - 1451381
The design and development of a high-resolution visible-to-near-UV
telescope for balloon-borne astronomy: SuperBIT
Romualdez, L. Javier;
Benton, Steven J.;
Clark, Paul;
Damaren, Christopher J.;
Eifler, Tim;
Fraisse, Aurelien A.;
Galloway, Mathew N.;
Hartley, John W.;
Jones, William C.;
Li, Lun;
Lipton, Leeav;
Luu, Thuy Vy T.;
Massey, Richard J.;
Netterfield, C. Barth;
Padilla, Ivan;
Rhodes, Jason D.;
Schmoll, Jürgen
Submitted: 2016-08-08
Balloon-borne astronomy is unique in that it allows for a level of image
stability, resolution, and optical backgrounds that are comparable to
space-borne systems due to greatly reduced atmospheric interference, but at a
fraction of the cost and over a significantly reduced development time-scale.
Instruments operating within visible-to-near-UV bands ($300$ - $900$ um) can
achieve a theoretical diffraction limited resolution of $0.01"$ from the
stratosphere ($35$ - $40$ km altitude) without the need for extensive adaptive
optical systems required by ground-based systems. The {\it Superpressure
Balloon-borne Imaging Telescope} ("SuperBIT") is a wide-field imager designed
to achieve 0.02$"$ stability over a 0.5$^\circ$ field-of-view, for deep single
exposures of up to 5 minutes. SuperBIT is thus well-suited for many
astronomical observations, from solar or extrasolar planetary observations, to
resolved stellar populations and distant galaxies (whether to study their
morphology, evolution, or gravitational lensing by foreground mass). We report
SuperBIT's design and implementation, emphasizing its two-stage real-time
stabilization: telescope stability to $1$ - $2"$ at the telescope level (a goal
surpassed during a test flight in September 2015) and image stability down to
$0.02"$ via an actuated tip-tilt mirror in the optical path (to be tested
during a flight in 2016). The project is progressing toward a fully
operational, three month flight from New Zealand by 2018
[13]
oai:arXiv.org:1509.01480 [pdf] - 1271733
The first GCT camera for the Cherenkov Telescope Array
De Franco, A.;
White, R.;
Allan, D.;
Armstrong, T.;
Ashton, T.;
Balzer, A.;
Berge, D.;
Bose, R.;
Brown, A. M.;
Buckley, J.;
Chadwick, P. M.;
Cooke, P.;
Cotter, G.;
Daniel, M. K.;
Funk, S.;
Greenshaw, T.;
Hinton, J.;
Kraus, M.;
Lapington, J.;
Molyneux, P.;
Moore, P.;
Nolan, S.;
Okumura, A.;
Ross, D.;
Rulten, C.;
Schmoll, J.;
Schoorlemmer, H.;
Stephan, M.;
Sutcliffe, P.;
Tajima, H.;
Thornhill, J.;
Tibaldo, L.;
Varner, G.;
Watson, J.;
Zink, A.
Submitted: 2015-09-04
The Gamma Cherenkov Telescope (GCT) is proposed to be part of the Small Size
Telescope (SST) array of the Cherenkov Telescope Array (CTA). The GCT
dual-mirror optical design allows the use of a compact camera of diameter
roughly 0.4 m. The curved focal plane is equipped with 2048 pixels of
~0.2{\deg} angular size, resulting in a field of view of ~9{\deg}. The GCT
camera is designed to record the flashes of Cherenkov light from
electromagnetic cascades, which last only a few tens of nanoseconds. Modules
based on custom ASICs provide the required fast electronics, facilitating
sampling and digitisation as well as first level of triggering. The first GCT
camera prototype is currently being commissioned in the UK. On-telescope tests
are planned later this year. Here we give a detailed description of the camera
prototype and present recent progress with testing and commissioning.
[15]
oai:arXiv.org:1307.4962 [pdf] - 1943149
The dual-mirror Small Size Telescope for the Cherenkov Telescope Array
Pareschi, G.;
Agnetta, G.;
Antonelli, L. A.;
Bastieri, D.;
Bellassai, G.;
Belluso, M.;
Bigongiari, C.;
Billotta, S.;
Biondo, B.;
Bonanno, G.;
Bonnoli, G.;
Bruno, P.;
Bulgarelli, A.;
Canestrari, R.;
Capalbi, M.;
Caraveo, P.;
Carosi, A.;
Cascone, E.;
Catalano, O.;
Cereda, M.;
Conconi, P.;
Conforti, V.;
Cusumano, G.;
De Caprio, V.;
De Luca, A.;
Di Paola, A.;
Di Pierro, F.;
Fantinel, D.;
Fiorini, M.;
Fugazza, D.;
Gardiol, D.;
Ghigo, M.;
Gianotti, F.;
Giarrusso, S.;
Giro, E.;
Grillo, A.;
Impiombato, D.;
Incorvaia, S.;
La Barbera, A.;
La Palombara, N.;
La Parola, V.;
La Rosa, G.;
Lessio, L.;
Leto, G.;
Lombardi, S.;
Lucarelli, F.;
Maccarone, M. C.;
Malaguti, G.;
Malaspina, G.;
Mangano, V.;
Marano, D.;
Martinetti, E.;
Millul, R.;
Mineo, T.;
MistÒ, A.;
Morello, C.;
Morlino, G.;
Panzera, M. R.;
Rodeghiero, G.;
Romano, P.;
Russo, F.;
Sacco, B.;
Sartore, N.;
Schwarz, J.;
Segreto, A.;
Sironi, G.;
Sottile, G.;
Stamerra, A.;
Strazzeri, E.;
Stringhetti, L.;
Tagliaferri, G.;
Testa, V.;
Timpanaro, M. C.;
Toso, G.;
Tosti, G.;
Trifoglio, M.;
Vallania, P.;
Vercellone, S.;
Zitelli, V.;
Amans, J. P.;
Boisson, C.;
Costille, C.;
Dournaux, J. L.;
Dumas, D.;
Fasola, G.;
Hervet, O.;
Huet, J. M.;
Laporte, P.;
Rulten, C.;
Sol, H.;
Zech, A.;
White, R.;
Hinton, J.;
Ross, D.;
Sykes, J.;
Ohm, S.;
Schmoll, J.;
Chadwick, P.;
Greenshaw, T.;
Daniel, M.;
Cotter, G.;
Varner, G. S.;
Funk, S.;
Vandenbroucke, J.;
Sapozhnikov, L.;
Buckley, J.;
Moore, P.;
Williams, D.;
Markoff, S.;
Vink, J.;
Berge, D.;
Hidaka, N.;
Okumura, A.;
Tajima, H.
Submitted: 2013-07-18
In this paper, the development of the dual mirror Small Size Telescopes (SST)
for the Cherenkov Telescope Array (CTA) is reviewed. Up to 70 SST, with a
primary mirror diameter of 4 m, will be produced and installed at the CTA
southern site. These will allow investigation of the gamma-ray sky at the
highest energies accessible to CTA, in the range from about 1 TeV to 300 TeV.
The telescope presented in this contribution is characterized by two major
innovations: the use of a dual mirror Schwarzschild-Couder configuration and of
an innovative camera using as sensors either multi-anode photomultipliers
(MAPM) or silicon photomultipliers (SiPM). The reduced plate-scale of the
telescope, achieved with the dual-mirror optics, allows the camera to be
compact (40 cm in diameter), and low-cost. The camera, which has about 2000
pixels of size 6x6 mm^2, covers a field of view of 10{\deg}. The dual mirror
telescopes and their cameras are being developed by three consortia, ASTRI
(Astrofisica con Specchi a Tecnologia Replicante Italiana, Italy/INAF), GATE
(Gamma-ray Telescope Elements, France/Paris Observ.) and CHEC (Compact High
Energy Camera, universities in UK, US and Japan) which are merging their
efforts in order to finalize an end-to-end design that will be constructed for
CTA. A number of prototype structures and cameras are being developed in order
to investigate various alternative designs. In this contribution, these designs
are presented, along with the technological solutions under study.
[16]
oai:arXiv.org:1307.3035 [pdf] - 1943145
SST-GATE: A dual mirror telescope for the Cherenkov Telescope Array
Zech, A.;
Amans, J. -P.;
Blake, S.;
Boisson, C.;
Costille, C.;
De-Frondat, F.;
Dournaux, J. -L.;
Dumas, D.;
Fasola, G.;
Greenshaw, T.;
Hervet, O.;
Huet, J. -M.;
Laporte, P.;
Rulten, C.;
Savoie, D.;
Sayede, F.;
Schmoll, J.;
Sol, H.
Submitted: 2013-07-11
The Cherenkov Telescope Array (CTA) will be the world's first open
observatory for very high energy gamma-rays. Around a hundred telescopes of
different sizes will be used to detect the Cherenkov light that results from
gamma-ray induced air showers in the atmosphere. Amongst them, a large number
of Small Size Telescopes (SST), with a diameter of about 4 m, will assure an
unprecedented coverage of the high energy end of the electromagnetic spectrum
(above ~1TeV to beyond 100 TeV) and will open up a new window on the
non-thermal sky. Several concepts for the SST design are currently being
investigated with the aim of combining a large field of view (~9 degrees) with
a good resolution of the shower images, as well as minimizing costs. These
include a Davies-Cotton configuration with a Geiger-mode avalanche photodiode
(GAPD) based camera, as pioneered by FACT, and a novel and as yet untested
design based on the Schwarzschild-Couder configuration, which uses a secondary
mirror to reduce the plate-scale and to allow for a wide field of view with a
light-weight camera, e.g. using GAPDs or multi-anode photomultipliers. One
objective of the GATE (Gamma-ray Telescope Elements) programme is to build one
of the first Schwarzschild-Couder prototypes and to evaluate its performance.
The construction of the SST-GATE prototype on the campus of the Paris
Observatory in Meudon is under way. We report on the current status of the
project and provide details of the opto-mechanical design of the prototype, the
development of its control software, and simulations of its expected
performance.
[17]
oai:arXiv.org:1307.2807 [pdf] - 1937862
A Compact High Energy Camera for the Cherenkov Telescope Array
Daniel, M. K.;
White, R. J.;
Berge, D.;
Buckley, J.;
Chadwick, P. M.;
Cotter, G.;
Funk, S.;
Greenshaw, T.;
Hidaka, N.;
Hinton, J.;
Lapington, J.;
Markoff, S.;
Moore, P.;
Nolan, S.;
Ohm, S.;
Okumura, A.;
Ross, D.;
Sapozhnikov, L.;
Schmoll, J.;
Sutcliffe, P.;
Sykes, J.;
Tajima, H.;
Varner, G. S.;
Vandenbroucke, J.;
Vink, J.;
Williams, D.
Submitted: 2013-07-10
The Compact High Energy Camera (CHEC) is a camera-development project
involving UK, US, Japanese and Dutch institutes for the dual-mirror Small-Sized
Telescopes (SST-2M) of the Cherenkov Telescope Array (CTA). Two CHEC
prototypes, based on different photosensors are funded and will be assembled
and tested in the UK over the next ~18 months. CHEC is designed to record
flashes of Cherenkov light lasting from a few to a hundred nanoseconds, with
typical RMS image width and length of ~0.2 x 1.0 degrees, and has a 9 degree
field of view. The physical camera geometry is dictated by the telescope
optics: a curved focal surface with radius of curvature 1m and diameter ~35cm
is required. CHEC is designed to work with both the ASTRI and GATE SST-2M
telescope structures and will include an internal LED flasher system for
calibration. The first CHEC prototype will be based on multi-anode
photomultipliers (MAPMs) and the second on silicon photomultipliers (SiPMs or
MPPCs). The first prototype will soon be installed on the ASTRI SST-2M
prototype structure on Mt. Etna.
[18]
oai:arXiv.org:astro-ph/0606145 [pdf] - 82585
Design and manufacture of micro-optical arrays using 3D diamond
machining techniques
Submitted: 2006-06-07
We describe our work towards the manufacture of micro-optical arrays using
freeform diamond machining techniques. Simulations have been done to show the
feasibility of manufacturing micro-lens arrays using the slow-tool servo
method. Using this technique, master shapes can be produced for replication of
micro-lens arrays of either epoxy-on-glass or monolthic glass types. A machine
tool path programme has been developed on the machine software platform
DIFFSYS, allowing the production of spherical, aspherical and toric arrays. In
addition, in theory spatially varying lenslets, sparse arrays and dithered
lenslet arrays (for high contrast applications) are possible to produce. In
practice, due to the diamond tool limitations not all formats are feasible.
Investigations into solving this problem have been carried out and a solution
is presented here.
[19]
oai:arXiv.org:astro-ph/0509684 [pdf] - 1468875
Optical replication techniques for image slicers
Schmoll, J.;
Robertson, D. J.;
Dubbeldam, C. M.;
Yao, J.;
Bortoletto, F.;
Pina, L.;
Hudec, R.;
Prieto, E.;
Norrie, C.;
Ramsay-Howat, S.;
Preuss, W.
Submitted: 2005-09-22, last modified: 2005-09-29
The Smart Focal Planes (SmartFP) activity is a European Joint Research
Activity funded to develop novel optical technologies for future large
telescope instrumentation. In this paper, we will discuss the image slicer
developments being carried out as part of this initiative. Image slicing
technique s have many applications in the plans for instrumentation on
Extremely Large Telescopes and will be central to the delivery of the science
case. A study of a virtual "multi-object multi-ifu spectrograph and imager"
(MOMSI) for a hypothetical OWL-class telescope reveals the need for focal plane
splitting, deployable imagers and very small beam steering elements like
deployable IFUs. The image slicer workpackage, lead from Durham University in
collaboration with LFM Bremen, TNO Delft, UKATC Edinburgh, CRAL Lyon, LAM
Marseille, Padua University and REFLEX Prague, is evaluating technologies for
manufacturing micro optics in large numbers to enable multi-object integral
field spectroscopy.
[20]
oai:arXiv.org:astro-ph/0509682 [pdf] - 76263
The Durham Micro-Optics Programme
Submitted: 2005-09-22
The Durham Microoptics Programme was established to develop key components to
be used for integral field spectrographs for upcoming instrumentation projects,
focussing on currently existing telescopes as well as on the next generation of
ELTs. These activities include monolithic multi-optics machining and grinding,
optical surface improvement using various post polishing techniques and
replication of micro-optical components. While these developments have mostly
slicer-type IFUs in mind, also new types of microlens arrays are in development
for fiber based high contrast IFU systems.
[21]
oai:arXiv.org:astro-ph/0502581 [pdf] - 71372
PMAS, the Potsdam Multi-Aperture Spectrophotometer. I. Design,
Manufacture, and Performance
Roth, M. M.;
Kelz, A.;
Fechner, T.;
Hahn, T.;
Bauer, S. -M.;
Becker, T.;
Boehm, P.;
Christensen, L.;
Dionies, F.;
Paschke, J.;
Popow, E.;
Wolter, D.;
Schmoll, J.;
Laux, U.;
Altmann, W.
Submitted: 2005-02-28
We describe the design, manufacture, commissioning, and performance of PMAS,
the Potsdam Multi-Aperture Spectrophotometer. PMAS is a dedicated integral
field spectrophotometer, optimized to cover the optical wavelength regime of
0.35--1um. It is based on the lens array -- fiber bundle principle of
operation. The instrument employs an all-refractive fiber spectrograph, built
with CaF2 optics, to provide good transmission and high image quality over the
entire nominal wavelength range. A set of user-selectable reflective gratings
provides low to medium spectral resolution in first order of approx. 1.5, 3.2,
and 7 A, depending on the groove density (1200, 600, 300 gr/mm). While the
standard integral field unit (IFU) uses a 16x16 element lens array, which
provides seeing-limited sampling in a relatively small field-of-view (FOV) in
one of three magnifications (8x8, 12x12, or 16x16 arcsec^2, respectively), a
recently retrofitted bare fiber bundle IFU (PPak) expands the FOV to a
hexagonal area with a footprint of 65x74 arcsec^2. Other special features
include a cryogenic CCD camera for field acquisition and guiding, a nod-shuffle
mode for beam switching and improved sky background subtraction, and a scanning
Fabry-Perot etalon in combination with the standard IFU (PYTHEAS mode). PMAS
was initially designed and built as an experimental traveling instrument with
optical interfaces to various telescopes (Calar Alto 3.5m, ESO-VLT, LBT). It is
offered as a common user instrument at Calar Alto under contract with MPIA
Heidelberg since 2002.
[22]
oai:arXiv.org:astro-ph/0408449 [pdf] - 66940
Design and construction of the IMACS-IFU, a 2000-element integral field
unit
Submitted: 2004-08-24
The IMACS-IFU is an Integral Field Unit built for the IMACS spectrograph at
the Magellan-I-Telescope at Las Campanas Observatory. It consists of two
rectangular fields of 5 by 7 arcseconds, separated by roughly one arcminute.
With a total number of 2000 spatial elements it is the second largest
fiber-lenslet based IFU worldwide, working in a wavelength range between 400
and 900 nm. Due to the equally sized fields classical background subtraction,
beam switching and shuffling are possible observation techniques. One
particular design challenge was the single, half a metre long curved slit in
combination with a non telecentric output. Besides the construction some
preliminary results are described.
[23]
oai:arXiv.org:astro-ph/0311407 [pdf] - 60987
3D Spectrophotometry of Planetary Nebulae in the Bulge of M31
Submitted: 2003-11-17
We introduce crowded field integral field (3D) spectrophotometry as a useful
technique for the study of resolved stellar populations in nearby galaxies. As
a methodological test, we present a pilot study with selected extragalactic
planetary nebulae (XPN) in the bulge of M31, demonstrating how 3D spectroscopy
is able to improve the limited accuracy of background subtraction which one
would normally obtain with classical slit spectroscopy. It is shown that due to
the absence of slit effects, 3D is a most suitable technique for
spectrophometry. We present spectra and line intensities for 5 XPN in M31,
obtained with the MPFS instrument at the Russian 6m BTA, INTEGRAL at the WHT,
and with PMAS at the Calar Alto 3.5m Telescope. Using 3D spectra of bright
standard stars, we demonstrate that the PSF is sampled with high accuracy,
providing a centroiding precision at the milli-arcsec level. Crowded field 3D
spectrophotometry and the use of PSF fitting techniques is suggested as the
method of choice for a number of similar observational problems, including
luminous stars in nearby galaxies, supernovae, QSO host galaxies,
gravitationally lensed QSOs, and others.
[24]
oai:arXiv.org:astro-ph/0304288 [pdf] - 56196
Statistical Test of Optical Fibers for use in PMAS, the Potsdam
Multi-Aperture Spectrophotometer
Submitted: 2003-04-15
Focal ratio degradation measurements of optical fibers for the PMAS integral
field instrument have been performed using the Photometric Testbench of the
Potsdam Astrophysical Institute (AIP). An effort has been made to obtain
sufficiently large statistical samples of individual fiber measurements. The
optimization of the measurement process has made it possible to study
quantitatively the effects of different coupling methods (air--glass vs.\
immersion) and of imperfections like defocus, lateral displacement, and angular
misalignment. Furthermore, the effects of mechanical stress on focal ratio
degradation have been investigated, confirming the presumed cause of modal
noise which is known to limit the maximum signal-to-noise one can achieve with
fiber-coupled echelle spectrographs.
[25]
oai:arXiv.org:astro-ph/9908059 [pdf] - 107731
Photometric and Kinematic Studies of Open Star Clusters I: NGC 581 (M
103)
Submitted: 1999-08-06
We present CCD photometry and a proper motion study of the young open star
cluster, NGC 581 (M 103). Fitting isochrones to the colour magnitude diagram,
we found an age of 16 +/- 4 Myr and a distance of roughly 3 kpc for this
cluster. The proper motion study identifies 77 stars of V=14.5 mag or brighter
to be cluster members. We combine membership determination by proper motions
and statistical field star subtraction to derive the IMF of the cluster and
find a quite steep slope of Gamma=-1.80.
[26]
oai:arXiv.org:astro-ph/9903177 [pdf] - 1235315
BUSCA: A Telescope Instrumentation for Simultaneous Imaging in 4 Optical
Bands
Reif, K.;
Bagschik, K.;
de Boer, K. S.;
Schmoll, J.;
Mueller, Ph.;
Poschmann, H;
Klink, G;
Kohley, R;
Heber, U.;
Mebold, U.
Submitted: 1999-03-11
The "Bonn University Simultaneous CAmera" (BUSCA) is a CCD camera system
which allows simultaneous direct imaging of the same sky area in four colors.
The optics are designed for an f/8 beam and four 4Kx4K CCDs with 15m pixels
covering a field of view of 12 arcmin x 12 arcmin at a 2m class telescope. In
September 1998 BUSCA has seen "First Light".
The instrument is based on three dichroic beam splitters which separate
optical wavelength bands such (at 430nm, 540nm, 730nm) that standard
astronomical intermediate-band filter systems can be used. The dichroics are
made of plane-parallel glass plates mounted at an angle of 45 degrees.
Astigmatism in the transmitted beams (f/8) is completely cancelled by identical
plane-parallel glass plates of suitable orientation.
BUSCA offers new perspectives in astronomical multicolor photometry: i) The
broadband spectral properties (e.g. color indices) of astronomical objects in
the optical can be determined with high reliability even in non-photometric
atmospheric conditions. ii) Precious observing time is used very efficiently.
iii) With the large field of view, extended objects like globular and open star
clusters or galaxies are covered in a single exposure. iv) Each exposure
results in a complete data set.
