Context: Hot coronal jets are a basic observed feature of the solar atmosphere whose physical origin is still being actively debated. Aims: We study six recurrent jets occurring in the active region NOAA 12644 on April 04, 2017. They are observed in all the hot filters of AIA as well as cool surges in IRIS slit-jaw high spatial and temporal resolution images. Methods: The AIA filters allow us to study the temperature and the emission measure of the jets using the filter ratio method. We study the pre-jet phases by analyzing the intensity oscillations at the base of the jets with the wavelet technique. Results: A fine co-alignment of the AIA and IRIS data shows that the jets are initiated at the top of a canopy-like, double-chambered structure with cool emission on one side and hot emission in the other. The hot jets are collimated in the hot temperature filters, have high velocities (around 250 km/s) and accompanied by the cool surges and ejected kernels both moving at about 45 km/s. In the pre-phase of the jets, at their base we find quasi-periodic intensity oscillations in phase with small ejections; they have a period between 2 and 6 minutes and are reminiscent of acoustic or MHD waves. Conclusions: This series of jets and surges provides a good case-study to test the 2D and 3D magnetohydrodynamic (MHD) models that result from magnetic flux emergence. The double-chambered structure found in the observations corresponds to the cold and hot loop regions found in the models beneath the current sheet that contains the reconnection site. The cool surge with kernels is comparable with the cool ejection and plasmoids that naturally appear in the models.

Electric currents play a critical role in the triggering of solar flares and their evolution. The aim of the present paper is to test whether the surface electric current has a surface or subsurface fixed source as predicts the circuit approach of flare physics, or is the response of the surface magnetic field to the evolution of the coronal magnetic field as the MHD approach proposes. Out of all 19 X-class flares as observed by SDO from 2011 to 2016 near the disk center, we analyzed the only 9 eruptive flares for which clear ribbon-hooks were identifiable. Flare ribbons with hooks are considered to be the footprints of eruptive flux ropes in MHD flare models. For the first time, fine measurements of time-evolution of electric currents inside the hooks in the observations as well as in the OHM 3D MHD simulation are performed. Our analysis shows a decrease of the electric current in the area surrounded by the ribbon hooks during and after the eruption. We interpret the decrease of the electric currents as due to the expansion of the flux rope in the corona during the eruption. Our analysis brings a new contribution to the standard flare model in 3D.

It is generally accepted that extreme space weather events tend to be related to strong flares and fast halo coronal mass ejections CMEs. In the present paper, we carefully identify the chain of events from the Sun to the Earth induced by all 12 X-class flares that occurred in 2002. In this small sample, we find an unusual high rate (58\%) of solar sources with a longitude larger than 74 degrees. Yet, all 12 X-class flares are associated with at least one CME. The fast halo CMEs (50\% ) are related to interplanetary CMEs (ICMEs) at L1 and weak Dst minimum values ($> -51\;$nT); while 5 (41\%) of the 12 X-class flares are related to solar proton events (SPE). We conclude that: (i) All twelve analyzed solar events, even those associated with fast halo CMEs originating from the central disk region, and those ICMEs and SPEs were not very geo-effective. This unexpected result demonstrates that the suggested events in the chain (fast halo CME, X-class flares, central disk region, ICME, SPE) are not infallible proxies for geo-effectiveness. (ii) The low value of integrated and normalized southward component of the IMF ($B^*_z$) may explain the low geo-effectiveness for this small sample. In fact, $B^*_z$ is well correlated to the weak Dst and low auroral electrojet (AE) activity. Hence, the only space weather impact at Earth in 2002 we can explain is based on $B^*_z$ at L1.

We report on observations of the two newly-identified reconnection geometries involving erupting flux ropes. In 3D, a flux rope can reconnect either with a surrounding coronal arcade (recently named "ar-rf" reconnection) or with itself ("rr-rf" reconnection), and both kinds of reconnection create a new flux rope field line and a flare loop. For the first time, we identify all four constituents of both reconnections in a solar eruptive event, the filament eruption of 2011 June 07 observed by SDO/AIA. The ar-rf reconnection manifests itself as shift of one leg of the filament by more than 25" northward. At its previous location, a flare arcade is formed, while the new location of the filament leg previously corresponded to a footpoint of a coronal loop in 171 A. In addition, the evolution of the flare ribbon hooks is also consistent with the occurrence of ar--rf reconnection as predicted by MHD simulations. Specifically, the growing hook sweeps footpoints of preeruptive coronal arcades, and these locations become inside the hook. Furthermore, the rr-rf reconnection occurs during the peak phase above the flare arcade, in an apparently X-type geometry involving a pair of converging bright filament strands in the erupting filament. A new flare loop forms near the leg of one of the strands, while a bright blob, representing a remnant of the same strand, is seen ascending into the erupting filament. All together, these observations vindicate recent predictions of the 3D standard solar flare model.

I would like to thank Solar Physics colleagues for asking me to write this chapter on my professional life. My main interest has always been focused on the Sun, our star, from the heating of the corona, to the dynamics of prominences and their eruptions, ares and coronal mass ejections until their impact on the Earth. I built a new group in solar physics and gave to them my enthusiasm. They brought to me a lot of satisfaction. We have made important advances in solar physics with a step forward to understand the triggers of solar activity and their terrestrial effects. Our avant-garde research and discovery has opened new topics for the solar community. Mixing observations obtained on the ground and in space with theory and numerical simulations brings a new perspective in research.

The chapter "Solar Active Region Electric Currents Before and During Eruptive Flares" is a discussion on electric currents in the pre-eruption state and in the course of eruptions of solar magnetic structures, using information from solar observations, nonlinear force-free field extrapolations relying on these observations, and three-dimensional magnetohydrodynamic (MHD) models. The discussion addresses the issue of neutralized vs. non-neutralized currents in active regions and concludes that MHD models are able to explain non-neutralized currents in active regions by the existence of strong magnetic shear along the polarity inversion lines, thus confirming previous observations that already contained this result. The models have also captured the essence of the behavior of electric currents in active regions during solar eruptions, predicting current-density increases and decreases inside flare ribbons and in the interior of expanding flux ropes respectively. The observed photospheric current density maps, inferred from vector magnetic field observations, exhibit similar whirling ribbon patterns to the MHD model results, that are interpreted as the signatures of flux ropes and of quasi-separatrix layers (QSLs) between the magnetic systems in active regions. Enhancement of the total current in these QSLs during the eruptions and decreasing current densities at the footpoint of erupting flux ropes, has been confirmed in the observations.

Context. In previous work, we studied a prominence which appeared like a tornado in a movie made from 193 {\AA} filtergrams obtained with the Atmospheric Imaging Assembly (AIA) imager aboard the Solar Dynamics Observatory (SDO). The observations in H$\alpha$ obtained simultaneously during two consecutive sequences of one hour with the Multi-channel Subtractive Double Pass Spectrograph (MSDP) operating at the solar tower in Meudon showed that the cool plasma inside the tornado was not rotating around its vertical axis. Furthermore, the evolution of the Dopplershift pattern suggested the existence of oscillations of periods close to the time-span of each sequence. Aims. The aim of the present work is to assemble the two sequences of H$\alpha$ observations as a full data set lasting two hours to confirm the existence of oscillations, and determine their nature. Methods. After having coaligned the Doppler maps of the two sequences, we use a Scargle periodogram analysis and cosine fitting to compute the periods and the phase of the oscillations in the full data set. Results. Our analysis confirms the existence of oscillations with periods between 40 and 80 minutes. In the Dopplershift maps, we identify large areas with strong spectral power. In two of them, the oscillations of individual pixels are in phase. However, in the top area of the prominence, the phase is varying slowly, suggesting wave propagation. Conclusions. We conclude that the prominence does not oscillate as a whole structure but exhibits different areas with their own oscillation periods and characteristics: standing or propagating waves. We discuss the nature of the standing oscillations and the propagating waves. These can be interpreted in terms of gravito-acoustic modes and magnetosonic waves, respectively.

Atypical flares cannot be naturally explained with standard models. To predict such flares, we need to define their physical characteristics, in particular, their magnetic environment, and identify pairs of reconnected loops. Here, we present in detail a case-study of a confined flare preceded by flux cancellation that leads to the formation of a filament. The slow rise of the non-eruptive filament favours the growth and reconnection of overlying loops. The flare is only of C5.0 class but it is a long duration event. The reason is that it is comprised of three successive stages of reconnection. A non-linear force-free field extrapolation and a magnetic topology analysis allow us to identify the loops involved in the reconnection process and build a reliable scenario for this atypical confined flare. The main result is that a curved magnetic polarity inversion line in active regions is a key ingredient for producing such atypical flares. A comparison with previous extrapolations for typical and atypical confined flares leads us to propose a cartoon for generalizing the concept

The term "ultraviolet (UV) burst" is introduced to describe small, intense, transient brightenings in ultraviolet images of solar active regions. We inventorize their properties and provide a definition based on image sequences in transition-region lines. Coronal signatures are rare, and most bursts are associated with small-scale, canceling opposite-polarity fields in the photosphere that occur in emerging flux regions, moving magnetic features in sunspot moats, and sunspot light bridges. We also compare UV bursts with similar transition-region phenomena found previously in solar ultraviolet spectrometry and with similar phenomena at optical wavelengths, in particular Ellerman bombs. Akin to the latter, UV bursts are probably small-scale magnetic reconnection events occurring in the low atmosphere, at photospheric and/or chromospheric heights. Their intense emission in lines with optically thin formation gives unique diagnostic opportunities for studying the physics of magnetic reconnection in the low solar atmosphere. This paper is a review report from an International Space Science Institute team that met in 2016-2017.

A large filament composed principally of two sections erupted sequentially in the southern hemisphere on January 26 2016. The central, thick part of the northern section was first lifted up and lead to the eruption of the full filament. This event was observed in H-alpha with GONG and CLIMSO, and in ultraviolet (UV) with the AIA/SDO imager. The aim of the paper is to relate the photospheric motions below the filament and its environment to the eruption of the filament. An analysis of the photospheric motions using SDO/HMI continuum images with the coherent structure tracking (CST) algorithm developed to track granules, as well as large-scale photospheric flows, has been performed. The supergranule pattern is clearly visible outside the filament channel but difficult to detect inside because the modulus of the vector velocity is reduced in the filament channel, mainly in the magnetized areas. The horizontal photospheric flows are strong on the west side of the filament channel and oriented towards the filament. The ends of the filament sections are found in areas of concentration of corks. Whirled flows are found locally around the feet. The strong horizontal flows with an opposite direction to the differential rotation create strong shear and convergence along the magnetic polarity inversion line (PIL) in the filament channel. The filament has been destabilized by the converging flows, which initiate an ascent of the middle section of the filament until the filament reaches the critical height of the torus instability inducing, consequently, the eruption. The "n" decay index indicated an altitude of 60 Mm for the critical height. It is conjectured that the convergence along the PIL is due to the large-scale size cells of convection that transport the magnetic field to their borders.

In this paper, we present the observations of two successive fast-mode extreme ultraviolet (EUV) wave events observed on 2016 July 23. Both fast-mode waves were observed by the Atmospheric Imaging Assembly (AIA) instrument on board the Solar Dynamics Observatory (SDO) satellite, with a traveling speed of ~ 675 and 640 km/s, respectively. These two wave events were associated with two filament eruptions and two GOES M-class solar flares from the NOAA active region 12565, which was located near the western limb. The EUV waves mainly move toward the south direction. We observed the interaction of the EUV waves with a helmet streamer further away in the south. When either or one of the EUV waves penetrates into the helmet streamer, a slowly propagating wave with a traveling speed of ~ 150 km/s is observed along the streamer. We suggest that the slowly-moving waves are slow-mode waves, and interpret this phenomenon as the magnetohydrodynamic (MHD) wave mode conversion from the fast mode to the slow mode. Besides, we observed several stationary fronts in the north and south of the source region.

Taking the 32 storm sudden commencements (SSCs) listed by ISGI during 2002 as a starting point, we performed a multi-criterion analysis based on observations (propagation time, velocity comparisons, sense of the magnetic field rotation, radio waves) to associate them with solar sources. We identified their effects in the interplanetary medium, and looked at the response of the terrestrial ionized and neutral environment. We find that 28 SSCs can be related to 44 coronal mass ejections (CMEs), 15 with a unique CME and 13 with a series of multiple CMEs, among which 19 involved halo CMEs; 12 of the 19 fastest CMEs with speeds greater than 1000 km/s are halo CMEs. The probability for an SSC to occur is 75% if the CME is a halo CME. The complex interactions between two CMEs and the modification of their trajectories have been examined using joint white-light and multiple-wavelength radio observations. The solar-wind structures at L1 after the shocks leading the 32 SSCs are 12 magnetic clouds (MCs), 6 interplanetary CMEs (ICMEs) without an MC structure, 4 miscellaneous structures, which cannot unambiguously be classified as ICMEs, 5 corotating or stream interaction regions (CIRs/SIRs), and 4 isolated shock events; note than one CIR caused two SSCs. The 11 MCs listed in 3 or more MC catalogs covering the year 2002 are associated with SSCs. For the 3 most intense geomagnetic storms related to MCs, we note 2 sudden increases of the Dst, at the arrival of the sheath and the arrival of the MC itself. The most geoeffective events are MCs, since 92% of them trigger moderate or intense storms, followed by ICMEs (33%). At best, CIRs/SIRs only cause weak storms. We show that these geoeffective events (ICMEs or MCs) trigger or reinforce terrestrial radiowave activity in the magnetosphere, an enhanced convection in the ionosphere, and a stronger response in the thermosphere.

We follow the eruption of two related intermediate filaments observed in H$\alpha$ (from GONG) and in EUV (from SDO/AIA) and the resulting large-amplitude longitudinal oscillations of the plasma in the filament channels. The events occurred in and around the decayed active region AR12486 on 2016 January 26. Our detailed study of the oscillation reveals that the periods of the oscillations are about one hour. In H$\alpha$ the period decreases with time and exhibits strong damping. The analysis of 171~\AA\ images shows that the oscillation has two phases, an initial long period phase and a subsequent oscillation with a shorter period. In this wavelength the damping appears weaker than in H$\alpha$. The velocity is the largest ever detected in a prominence oscillation, approximately 100 $\mathrm{\, km \, s^{-1}}$. Using SDO/HMI magnetograms we reconstruct the magnetic field of the filaments modeled as flux ropes by using a flux-rope insertion method. Applying seismological techniques we determine that the radii of curvature of the field lines in which cool plasma is condensed are in the range 75-120~Mm, in agreement with the reconstructed field. In addition, we infer a field strength of $\ge7$ to 30 gauss, depending on the electron density assumed; that is also in agreement with the values from the reconstruction (8-20 gauss). The poloidal flux is zero and the axis flux is of the order of 10$^{20}$ to 10$^{21}$ Mx, confirming the high shear existing even in a non-active filament.

In this study, we present the investigation of eleven recurring solar jets originated from two different sites (site 1 and site 2) close to each other (~ 11 Mm) in the NOAA active region (AR) 12035 during 15--16 April 2014. The jets were observed by the Atmospheric Imaging Assembly (AIA) telescope onboard the Solar Dynamics Observatory (SDO) satellite. Two jets were observed by the Aryabhatta Research Institute of Observational Sciences (ARIES), Nainital, India telescope in H-alpha. On 15 April flux emergence is important in site 1 while on 16 April flux emergence and cancellation mechanisms are involved in both sites. The jets of both sites have parallel trajectories and move to the south with a speed between 100 and 360 km/s. We observed some connection between the two sites with some transfer of brightening. The jets of site 2 occurred during the second day and have a tendency to move towards the jets of site 1 and merge with them. We conjecture that the slippage of the jets could be explained by the complex topology of the region with the presence of a few low-altitude null points and many quasi-separatrix layers (QSLs), which could intersect with one another.

Context. Understanding the close relationship between the plasma and the magnetic field is important to describe and explain the observed complex dynamics of solar prominences. Aims. We determine if a close relationship between plasma and magnetic field parameters measured in a well-observed solar prominence with high spatial resolution can be found. Methods. We select a prominence observed on 15 July 2014 from space (IRIS, Hinode, SDO) and from the ground (THEMIS). We perform a robust co-alignment of the data sets using a 2D cross-correlation technique. We derive the magnetic field parameters from spectropolarimetric measurements of the He I D3 line taken by THEMIS. Line ratios and line-of-sight velocities from the Mg II h and k lines observed by IRIS are compared with magnetic field strength, inclination and azimuth. Electron densities are calculated using Hinode/EIS Fe XII line ratios and also compared with THEMIS and IRIS data. Results. We find Mg II k/h ratios of around 1.4 everywhere, similar to values found previously in prominences. We also find that the magnetic field is strongest (around 30 G) and predominantly horizontal in the tornado-like legs of the prominence. The k3 Doppler shift is found to be between +/- 10 km/s everywhere. Electron densities at a temperature of 1.5e6 K are found to be around 1e9 /cm3. No significant correlations are found between the magnetic field parameters, and any of the other plasma parameters inferred from EUV spectroscopy, which may be explained by the large differences in the temperatures of the lines used in this study. Conclusions. This is the first time that a detailed statistical study of plasma and magnetic field parameters has been carried out at high spatial resolution in a prominence. Our results provide important constraints on future models of the plasma and magnetic field in these structures.

Many questions have to be answered before understanding the relationship between the emerging magnetic flux through the solar surface and the extreme geoeffective events. Which threshold determines the onset of the eruption? What is the upper limit in energy for a flare? Is the size of sunspot the only criteria to get extreme solar events? Based on observations of previous solar cycles, and theory, the main ingredients for getting X ray class flares and large Interplanetary Corona Mass Ejections e.g. the built up of the electric current in the corona, are presented such as the existence of magnetic free energy, magnetic helicity, twist and stress in active regions. The upper limit of solar flare energy in space research era and the possible chances to get super-flares and extreme solar events can be predicted using MHD simulation of coronal mass ejections

Movies of prominences obtained by space instruments e.g. the Solar Optical Telescope (SOT) aboard the {\it Hinode} satellite and the Interface Region Imaging Spectrograph (IRIS) with high temporal and spatial resolution revealed the tremendous dynamical nature of prominences. { Knots of plasma belonging to prominences} appear to travel along both vertical and horizontal thread-like loops, with highly dynamical nature. The aim of the paper is to reconstruct the 3D shape of a helical prominence observed over two and a half hours by IRIS. From the IRIS \ion{Mg}{ii} k spectra we compute Doppler shifts of the plasma inside the prominence and from the slit-jaw images (SJI){ we derive the transverse field in the plane of the sky. Finally we obtain the velocity vector field of the knots in 3D. We reconstruct the real trajectories of nine knots travelling along ellipses. The spiral-like structure of the prominence observed in the plane of the sky is mainly due to the projection effect of long arches of threads (up to 8 $ \times 10^4$ km). Knots run along more or less horizontal threads with velocities reaching 65 km s$^{-1}$. The dominant driving force is the gas pressure.

Eruptive solar flares were predicted to generate large-scale vortex flows at both sides of the erupting magnetic flux rope. This process is analogous to a well-known hydrodynamic process creating vortex rings. The vortices lead to advection of closed coronal loops located at peripheries of the flaring active region. Outward flows are expected in the upper part and returning flows in the lower part of the vortex. Here, we examine two eruptive solar flares, an X1.1-class flare SOL2012-03-05T03:20 and a C3.5-class SOL2013-06-19T07:29. In both flares, we find that the coronal loops observed by the Atmospheric Imaging Assembly in its 171\,\AA, 193\,\AA, or 211\,\AA~passbands show coexistence of expanding and contracting motions, in accordance with the model prediction. In the X-class flare, multiple expanding/contracting loops coexist for more than 35 minutes, while in the C-class flare, an expanding loop in 193\,\AA~appears to be close-by and co-temporal with an apparently imploding loop arcade seen in 171\,\AA. Later, the 193\,\AA~loop also switches to contraction. These observations are naturally explained by vortex flows present in a model of eruptive solar flares.

We present here an interesting two-step filament eruption during 14-15 March 2015. The filament was located in NOAA AR 12297 and associated with a halo Coronal Mass Ejection (CME). We use observations from the Atmospheric Imaging Assembly (AIA) and Heliospheric Magnetic Imager (HMI) instruments onboard the Solar Dynamics Observatory (SDO), and from the Solar and Heliospheric Observatory (SOHO) Large Angle and Spectrometric Coronagraph (LASCO). We also use H-alpha data from the Global Oscillation Network Group (GONG) telescope and the Kanzelhoehe Solar Observatory. The filament shows a first step eruption on 14 March 2015 and it stops its rise at a projected altitude ~ 125 Mm on the solar disk. It remains at this height for ~ 12 hrs. Finally it eruptes on 15 March 2015 and produced a halo CME. We also find jet activity in the active region during both days, which could help the filament de-stabilization and eruption. The decay index is calculated to understand this two-step eruption. The eruption could be due to the presence of successive instability-stability-instability zones as the filament is rising.

Solar flares are sudden and violent releases of magnetic energy in the solar atmosphere that can be divided in eruptive flares, when plasma is ejected from the solar atmosphere, resulting in a coronal mass ejection (CME), and confined flares when no CME is associated with the flare. We present a case-study showing the evolution of key topological structures, such as spines and fans which may determine the eruptive versus non-eruptive behavior of the series of eruptive flares, followed by confined flares, which are all originating from the same site. To study the connectivity of the different flux domains and their evolution, we compute a potential magnetic field model of the active region. Quasi-separatrix layers are retrieved from the magnetic field extrapolation. The change of behavior of the flares from one day to the next -eruptive to confined- can be attributed to the change of orientation of the magnetic field below the fan with respect to the orientation of the overlaying spine, rather than an overall change in the stability of the large scale field. Flares tend to be more-and-more confined when the field that supports the filament and the overlying field gradually become less-and-less anti-parallel, as a direct result of changes in the photospheric flux distribution, being themselves driven by continuous shearing motions of the different magnetic flux concentrations.

Eruptive flares are sudden releases of magnetic energy that involve many phenomena, several of which can be explained by the standard 2D flare model and its realizations in three-dimensions. We analyze a three-dimensional magnetohydrodynamics simulation in the framework of this model that naturally explains the contraction of coronal loops in the proximity of the flare sites, as well as the inflow towards the region above the cusp-shaped loops. We find that two vorticity arcs located along the flanks of the erupting magnetic flux rope are generated as soon as the eruption begins. The magnetic arcades above the flux-rope legs are then subjected to expansion, rotation or contraction depending on which part of the vortex-flow advects them. In addition to the vortices, an inward-directed magnetic pressure gradient exists in the current sheet below the magnetic flux rope. It results in the formation of a sink that is maintained by reconnection. We conclude that coronal loop apparent implosions observed during eruptive flares are the result of hydro-magnetic effects related to the generation of vortex- and sink-flows when a flux rope moves in a magnetized environment.

By using a new method of forced-field extrapolation, we study the emerging flux region AR 11850 observed by the Interface Region Imaging Spectrograph (IRIS) and Solar Dynamical Observatory (SDO). Our results suggest that the bright points (BPs) in this emerging region have responses in lines formed from the upper photosphere to the transition region, with a relatively similar morphology. They have an oscillation of several minutes according to the Atmospheric Imaging Assembly (AIA) data at 1600 and 1700 A . The ratio between the BP intensities measured in 1600 A and 1700 A filtergrams reveals that these BPs are heated differently. Our analysis of the Helioseismic and Magnetic Imager (HMI) vector magnetic field and the corresponding topology in AR11850 indicates that the BPs are located at the polarity inversion line (PIL) and most of them related with magnetic reconnection or cancelation. The heating of the BPs might be different due to different magnetic topology. We find that the heating due to the magnetic cancelation would be stronger than the case of bald patch reconnection. The plasma density rather than the magnetic field strength could play a dominant role in this process. Based on physical conditions in the lower atmosphere, our forced-field extrapolation shows consistent results between the bright arcades visible in slit-jaw image (SJI) 1400 A and the extrapolated field lines that pass through the bald patches. It provides a reliable observational evidence for testing the mechanism of magnetic reconnection for the BPs and arcades in emerging flux region, as proposed in simulation works.

High resolution movies in 193 A from the Atmospheric Imaging Assembly (AIA) on the Solar Dynamic Observatory SDO show apparent rotation in the leg of a prominence observed during a coordinated campaign. Such structures are commonly referred to as tornadoes. Time-distance intensity diagrams of the AIA data show the existence of oscillations suggesting that the structure is rotating. The aim of this paper is to understand if the cool plasma at chromospheric temperatures inside the tornado is rotating around its central axis. The tornado was also observed in Halpha with a cadence of 30 seconds by the MSDP spectrograph, operating at the Solar Tower in Meudon. The MSDP provides sequences of simultaneous spectra in a 2D field of view from which a cube of Doppler velocity maps is retrieved. The Halpha Doppler maps show a pattern with alternatively blueshifted and redshifted areas of 5 to 10 arcsec wide. Over time the blueshifted areas become redshifted and vice versa, with a quasi-periodicity of 40 to 60 minutes. Weaker amplitude oscillations with periods of 4 to 6 minutes are superimposed onto these large period oscillations. The Doppler pattern observed in Halpha cannot be interpreted as rotation of the cool plasma inside the tornado. The H$\alpha$ velocity observations give strong constraints on the possible interpretations of the AIA tornado

We simulate several magnetic reconnection processes in the low solar chromosphere/photosphere, the radiation cooling, heat conduction and ambipolar diffusion are all included. Our numerical results indicate that both the high temperature($ \gtrsim 8\times10^4$~K) and low temperature($\sim 10^4$~K) magnetic reconnection events can happen in the low solar atmosphere ($100\sim600$~km above the solar surface). The plasma $\beta$ controlled by plasma density and magnetic fields is one important factor to decide how much the plasma can be heated up. The low temperature event is formed in a high $\beta$ magnetic reconnection process, Joule heating is the main mechanism to heat plasma and the maximum temperature increase is only several thousand Kelvin. The high temperature explosions can be generated in a low $\beta$ magnetic reconnection process, slow and fast-mode shocks attached at the edges of the well developed plasmoids are the main physical mechanisms to heat the plasma from several thousand Kelvin to over $8\times10^4$~K. Gravity in the low chromosphere can strongly hinder the plasmoind instability and the formation of slow-mode shocks in a vertical current sheet. Only small secondary islands are formed; these islands, however, are not well developed as those in the horizontal current sheets. This work can be applied for understanding the heating mechanism in the low solar atmosphere and could possibly be extended to explain the formation of common low temperature EBs ($\sim10^4$~K) and the high tenperature IRIS bombs ($\gtrsim 8\times10^4$) in the future.

Context: A subclass of broad EUV and X-ray jets, called blowout jets, have become a topic of research since they could be the link between standard collimated jets and CMEs.} Aim: Our aim is to understand the origin of a series of broad jets, some accompanied by flares and associated with narrow and jet-like CMEs. Methods: We analyze observations of a series of recurrent broad jets observed in AR 10484 on 21-24 October 2003. In particular, one of them occurred simultaneously with an M2.4 flare on 23 October at 02:41 UT (SOLA2003-10-23). Both events were observed by ARIES H-alpha Solar Tower-Telescope, TRACE, SOHO, and RHESSI instruments. The flare was very impulsive and followed by a narrow CME. A local force-free model of AR 10484 is the basis to compute its topology. We find bald patches (BPs) at the flare site. This BP topology is present for at least two days before. Large-scale field lines, associated with the BPs, represent open loops. This is confirmed by a global PFSS model. Following the brightest leading edge of the H-alpha and EUV jet emission, we can temporarily associate it with a narrow CME. Results: Considering their characteristics, the observed broad jets appear to be of the blowout class. As the most plausible scenario, we propose that magnetic reconnection could occur at the BP separatrices forced by the destabilization of a continuously reformed flux rope underlying them. The reconnection process could bring the cool flux-rope material into the reconnected open field lines driving the series of recurrent blowout jets and accompanying CMEs. Conclusions: Based on a model of the coronal field, we compute the AR 10484 topology at the location where flaring and blowout jets occurred from 21 to 24 October 2003. This topology can consistently explain the origin of these events.

Spectropolarimetric observations of prominences have been obtained with the THEMIS telescope during four years of coordinated campaigns. Our aim is now to understand the conditions of the cool plasma and magnetism in `atypical' prominences, namely when the measured inclination of the magnetic field departs, to some extent, from the predominantly horizontal field found in `typical' prominences. What is the role of the magnetic field in these prominence types? Are plasma dynamics more important in these cases than the magnetic support? We focus our study on three types of `atypical' prominences (tornadoes, bubbles and jet-like prominence eruptions) that have all been observed by THEMIS in the He I D_3 line, from which the Stokes parameters can be derived. The magnetic field strength, inclination and azimuth in each pixel are obtained by using the Principal Component Analysis inversion method on a model of single scattering in the presence of the Hanle effect. The magnetic field in tornadoes is found to be more or less horizontal, whereas for the eruptive prominence it is mostly vertical. We estimate a tendency towards higher values of magnetic field strength inside the bubbles than outside in the surrounding prominence. In all of the models in our database, only one magnetic field orientation is considered for each pixel. While sufficient for most of the main prominence body, this assumption appears to be oversimplified in atypical prominence structures. We should consider these observations as the result of superposition of multiple magnetic fields, possibly even with a turbulent field component.

We present observations of interactions between the two filament channels of different chiralities and associated dynamics that occurred during 2014 April 18 -- 20. While two flux ropes of different helicity with parallel axial magnetic fields can only undergo a bounce interaction when they are brought together, the observations at the first glance show that the heated plasma is moving from one filament channel to the other. The SDO/AIA 171 A observations and the PFSS magnetic field extrapolation reveal the presence of fan-spine magnetic configuration over the filament channels with a null point located above them. Three different events of filament activations, partial eruptions, and associated filament channel interactions have been observed. The activation initiated in one filament channel seems to propagate along the neighbour filament channel. We believe that the activation and partial eruption of the filaments bring the field lines of flux ropes containing them closer to the null point and trigger the magnetic reconnection between them and the fan-spine magnetic configuration. As a result, the hot plasma moves along the outer spine line toward the remote point. Utilizing the present observations, for the first time we have discussed how two different-chirality filament channels can interact and show interrelation.

This document was created by the Solar Simulations for the Atacama Large Millimeter Observatory Network (SSALMON) in preparation of the first regular observations of the Sun with the Atacama Large Millimeter/submillimeter Array (ALMA), which are anticipated to start in ALMA Cycle 4 in October 2016. The science cases presented here demonstrate that a large number of scientifically highly interesting observations could be made already with the still limited solar observing modes foreseen for Cycle 4 and that ALMA has the potential to make important contributions to answering long-standing scientific questions in solar physics. With the proposal deadline for ALMA Cycle 4 in April 2016 and the Commissioning and Science Verification campaign in December 2015 in sight, several of the SSALMON Expert Teams composed strategic documents in which they outlined potential solar observations that could be feasible given the anticipated technical capabilities in Cycle 4. These documents have been combined and supplemented with an analysis, resulting in recommendations for solar observing with ALMA in Cycle 4. In addition, the detailed science cases also demonstrate the scientific priorities of the solar physics community and which capabilities are wanted for the next observing cycles. The work on this White Paper effort was coordinated in close cooperation with the two international solar ALMA development studies led by T. Bastian (NRAO, USA) and R. Brajsa, (ESO). This document will be further updated until the beginning of Cycle 4 in October 2016. In particular, we plan to adjust the technical capabilities of the solar observing modes once finally decided and to further demonstrate the feasibility and scientific potential of the included science cases by means of numerical simulations of the solar atmosphere and corresponding simulated ALMA observations.

We studied the magnetic topology of active region 12158 on 2014 September 10 and compared it with the observations before and early in the flare which begins at 17:21 UT (SOL2014-09-10T17:45:00). Our results show that the sigmoidal structure and flare ribbons of this active region observed by SDO/AIA can be well reproduced from a Grad-Rubin non linear force free field extrapolation method. Various inverse-S and -J shaped magnetic field lines, that surround a coronal flux rope, coincide with the sigmoid as observed in different extreme ultraviolet wavelengths, including its multi-threaded curved ends. Also, the observed distribution of surface currents in the magnetic polarity where it was not prescribed is well reproduced. This validates our numerical implementation and set-up of the Grad-Rubin method. The modeled double inverse-J shaped Quasi-Separatrix Layer (QSL) footprints match the observed flare ribbons during the rising phase of the flare, including their hooked parts. The spiral-like shape of the latter may be related to a complex pre-eruptive flux rope with more than one turn of twist, as obtained in the model. These ribbon-associated flux-rope QSL-footprints are consistent with the new standard flare model in 3D, with the presence of a hyperbolic flux tube located below an inverse tear drop shaped coronal QSL. This is a new step forward forecasting the locations of reconnection and ribbons in solar flares, and the geometrical properties of eruptive flux ropes.

We investigate the occurrence of slipping magnetic reconnection, chromospheric evaporation, and coronal loop dynamics in the 2014 September 10 X-class flare. The slipping reconnection is found to be present throughout the flare from its early phase. Flare loops are seen to slip in opposite directions towards both ends of the ribbons. Velocities of 20--40 km\,s$^{-1}$ are found within time windows where the slipping is well resolved. The warm coronal loops exhibit expanding and contracting motions that are interpreted as displacements due to the growing flux rope that subsequently erupts. This flux rope existed and erupted before the onset of apparent coronal implosion. This indicates that the energy release proceeds by slipping reconnection and not via coronal implosion. The slipping reconnection leads to changes in the geometry of the observed structures at the \textit{IRIS} slit position, from flare loop top to the footpoints in the ribbons. This results in variations of the observed velocities of chromospheric evaporation in the early flare phase. Finally, it is found that the precursor signatures including localized EUV brightenings as well as non-thermal X-ray emission are signatures of the flare itself, progressing from the early phase towards the impulsive phase, with the tether-cutting being provided by the slipping reconnection. The dynamics of both the flare and outlying coronal loops is found to be consistent with the predictions of the standard solar flare model in 3D.

The nature of various plausible causal links between sympathetic events is still a controversial issue. In this work, we present multi-wavelength observations of sympathetic eruptions, associated flares and coronal mass ejections (CMEs) occurring on 2013 November 17 in two close-by active regions. Two filaments i.e., F1 and F2 are observed in between the active regions. Successive magnetic reconnections, caused by different reasons (flux cancellation, shear and expansion) have been identified during the whole event. The first reconnection occurred during the first eruption via flux cancellation between the sheared arcades overlying filament F2, creating a flux rope and leading to the first double ribbon solar flare. During this phase we observed the eruption of overlaying arcades and coronal loops, which leads to the first CME. The second reconnection is believed to occur between the expanding flux rope of F2 and the overlying arcades of the filament F1. We suggest that this reconnection destabilized the equilibrium of filament F1, which further facilitated its eruption. The third stage of reconnection occurred in the wake of the erupting filament F1 between the legs of overlying arcades. This may create a flux rope and the second double ribbon flare and a second CME. The fourth reconnection was between the expanding arcades of the erupting filament F1 and the nearby ambient field, which produced the bi-directional plasma flows towards both upward and downward. Observations and a nonlinear force-free field extrapolation confirm the possibility of reconnection and the causal link between the magnetic systems.

We investigate the properties of a `solar tornado' observed on 15 July 2014, and aim to link the behaviour of the plasma to the internal magnetic field structure of the associated prominence. We made multi-wavelength observations with high spatial resolution and high cadence using SDO/AIA, the IRIS spectrograph and the Hinode/SOT instrument. Along with spectropolarimetry provided by the THEMIS telescope we have coverage of both optically thick emission lines and magnetic field information. AIA reveals that the two legs of the prominence are strongly absorbing structures which look like they are rotating, or oscillating in the plane of the sky. The two prominence legs, which are both very bright in Ca II (SOT), are not visible in the IRIS Mg II slit-jaw images. This is explained by the large optical thickness of the structures in Mg II which leads to reversed profiles, and hence to lower integrated intensities at these locations than in the surroundings. Using lines formed at temperatures lower than 1 MK, we measure relatively low Doppler shifts on the order of +/- 10 km/s in the tornado-like structure. Between the two legs we see loops in Mg II, with material flowing from one leg to the other, as well as counterstreaming. It is difficult to interpret our data as showing two rotating, vertical structures which are unrelated to the loops. This kind of `tornado' scenario does not fit with our observations. The magnetic field in the two legs of the prominence is found to be preferentially horizontal.

We study nonlinear waves in a prominence foot using 2.5D MHD model motivated by recent high-resolution observations with Hinode/SOT in Ca~II emission of a prominence on October 10, 2012 showing highly dynamic small-scale motions in the prominence material. Observations of H$\alpha$ intensities and of Doppler shifts show similar propagating fluctuations. However the optically thick nature of the emission lines inhibits unique quantitative interpretation in terms of density. Nevertheless, we find evidence of nonlinear wave activity in the prominence foot by examining the relative magnitude of the fluctuation intensity ($\delta I/I\sim \delta n/n$). The waves are evident as significant density fluctuations that vary with height, and apparently travel upward from the chromosphere into the prominence material with quasi-periodic fluctuations with typical period in the range of 5-11 minutes, and wavelengths $\sim <$2000 km. Recent Doppler shift observations show the transverse displacement of the propagating waves. The magnetic field was measured with THEMIS instrument and was found to be 5-14 G. For the typical prominence density the corresponding fast magnetosonic speed is $\sim$20 km s$^{-1}$, in qualitative agreement with the propagation speed of the detected waves. The 2.5D MHD numerical model is constrained with the typical parameters of the prominence waves seen in observations. Our numerical results reproduce the nonlinear fast magnetosonic waves and provide strong support for the presence of these waves in the prominence foot. We also explore gravitational MHD oscillations of the heavy prominence foot material supported by dipped magnetic field structure.

The term `solar tornadoes' has been used to describe apparently rotating magnetic structures above the solar limb, as seen in high resolution images and movies from the Atmospheric Imaging Assembly (AIA) aboard the Solar Dynamics Observatory (SDO). These often form part of the larger magnetic structure of a prominence, however the links between them remain unclear. Here we present plasma diagnostics on a tornado-like structure and its surroundings, seen above the limb by the Extreme-ultraviolet Imaging Spectrometer (EIS) aboard the Hinode satellite. We aim to extend our view of the velocity patterns seen in tornado-like structures with EIS to a wider range of temperatures and to provide insight into the physical characteristics of the plasma. Using Gaussian fitting to fit and de-blend the spectral lines seen by EIS, we calculated line-of-sight velocities and non-thermal line widths. Along with information from the CHIANTI database, we used line intensity ratios to calculate electron densities at each pixel. Using a regularised inversion code we also calculated the differential emission measure (DEM) at different locations in the prominence. The split Doppler-shift pattern is found to be visible down to a temperature of around log(T) = 6.0. At temperatures lower than this, the pattern is unclear in this data set. We obtain an electron density of log(n_e) = 8.5 when looking towards the centre of the tornado structure at a plasma temperature of log(T) = 6.2, as compared to the surroundings of the tornado structure where we find log(n_e) to be nearer 9. Non-thermal line widths show broader profiles at the tornado location when compared to the surrounding corona. We discuss the differential emission measure in both the tornado and the prominence body, which suggests that there is more contribution in the tornado at temperatures below log(T) = 6.0 than in the prominence.

The cluster formed by active regions (ARs) NOAA 11121 and 11123, approximately located on the solar central meridian on 11 November 2010, is of great scientific interest. This complex was the site of violent flux emergence and the source of a series of Earth-directed events on the same day. The onset of the events was nearly simultaneously observed by the Atmospheric Imaging Assembly (AIA) telescope aboard the Solar Dynamics Observatory (SDO) and the Extreme-Ultraviolet Imagers (EUVI) on the Sun-Earth Connection Coronal and Heliospheric Investigation (SECCHI) suite of telescopes onboard the Solar-Terrestrial Relations Observatory (STEREO) twin spacecraft. The progression of these events in the low corona was tracked by the Large Angle Spectroscopic Coronagraphs (LASCO) onboard the Solar and Heliospheric Observatory (SOHO) and the SECCHI/COR coronagraphs on STEREO. SDO and SOHO imagers provided data from the Earth's perspective, whilst the STEREO twin instruments procured images from the orthogonal directions. This spatial configuration of spacecraft allowed optimum simultaneous observations of the AR cluster and the coronal mass ejections that originated in it. Quadrature coronal observations provided by STEREO revealed a notably large amount of ejective events compared to those detected from Earth's perspective. Furthermore, joint observations by SDO/AIA and STEREO/SECCHI EUVI of the source region indicate that all events classified by GOES as X-ray flares had an ejective coronal counterpart in quadrature observations. These results have direct impact on current space weather forecasting because of the probable missing alarms when there is a lack of solar observations in a view direction perpendicular to the Sun-Earth line.

We used multi-wavelength high-resolution data from ARIES, THEMIS, and SDO instruments, to analyze a non-standard, C3.3 class flare produced within the active region NOAA 11589 on 2012 October 16. Magnetic flux emergence and cancellation were continuously detected within the active region, the latter leading to the formation of two filaments. Our aim is to identify the origins of the flare taking into account the complex dynamics of its close surroundings. We analyzed the magnetic topology of the active region using a linear force-free field extrapolation to derive its 3D magnetic configuration and the location of quasi-separatrix layers (QSLs) which are preferential sites for flaring activity. Because the active region's magnetic field was nonlinear force-free, we completed a parametric study using different linear force-free field extrapolations to demonstrate the robustness of the derived QSLs. The topological analysis shows that the active region presented a complex magnetic configuration comprising several QSLs. The considered data set suggests that an emerging flux episode played a key role for triggering the flare. The emerging flux likely activated the complex system of QSLs leading to multiple coronal magnetic reconnections within the QSLs. This scenario accounts for the observed signatures: the two extended flare-ribbons developed at locations matched by the photospheric footprints of the QSLs, and were accompanied with flare loops that formed above the two filaments which played no important role in the flare dynamics. This is a typical example of a complex flare that can a-priori show standard flare signatures that are nevertheless impossible to interpret with any standard model of eruptive or confined flare. We find that a topological analysis however permitted to unveil the development of such complex sets of flare signatures.

Context. A large prominence was observed on September 24, 2013, for three hours (12:12 UT -15:12 UT) with the newly launched (June 2013) Interface Region Imaging Spectrograph (IRIS), THEMIS (Tenerife), the Hinode Solar Optical Telescope (SOT), the Solar Dynamic Observatory Atmospheric Imaging Assembly (SDO/AIA), and the Multichannel Subtractive Double Pass spectrograph (MSDP) in the Meudon Solar Tower. Aims. The aim of this work is to study the dynamics of the prominence fine structures in multiple wavelengths to understand their formation. Methods. The spectrographs IRIS and MSDP provided line profiles with a high cadence in Mg II and in Halpha lines. Results. The magnetic field is found to be globally horizontal with a relatively weak field strength (8-15 Gauss). The Ca II movie reveals turbulent-like motion that is not organized in specific parts of the prominence. On the other hand, the Mg II line profiles show multiple peaks well separated in wavelength. Each peak corresponds to a Gaussian profile, and not to a reversed profile as was expected by the present non-LTE radiative transfer modeling. Conclusions. Turbulent fields on top of the macroscopic horizontal component of the magnetic field supporting the prominence give rise to the complex dynamics of the plasma. The plasma with the high velocities (70 km/s to 100 km/s if we take into account the transverse velocities) may correspond to condensation of plasma along more or less horizontal threads of the arch-shape structure visible in 304 A. The steady flows (5 km/s) would correspond to a more quiescent plasma (cool and prominence-corona transition region) of the prominence packed into dips in horizontal magnetic field lines. The very weak secondary peaks in the Mg II profiles may reflect the turbulent nature of parts of the prominence.

We present for the first time the evolution of the photospheric electric currents during an eruptive X-class flare, accurately predicted by the standard 3D flare model. We analyze this evolution for the February 15, 2011 flare using HMI/SDO magnetic observations and find that localized currents in \J-shaped ribbons increase to double their pre-flare intensity. Our 3D flare model, developed with the OHM code, suggests that these current ribbons, which develop at the location of EUV brightenings seen with AIA imagery, are driven by the collapse of the flare's coronal current layer. These findings of increased currents restricted in localized ribbons are consistent with the overall free energy decrease during a flare, and the shape of these ribbons also give an indication on how much twisted the erupting flux rope is. Finally, this study further enhances the close correspondence obtained between the theoretical predictions of the standard 3D model and flare observations indicating that the main key physical elements are incorporated in the model.

We studied the temporal evolution of the magnetic topology of the active region (AR) 11158 based on the reconstructed three-dimensional magnetic fields in the corona. The \nlfff\ extrapolation method was applied to the 12 minutes cadence data obtained with the \hmi\ (HMI) onboard the \sdo\ (SDO) during five days. By calculating the squashing degree factor Q in the volume, the derived quasi-separatrix layers (QSLs) show that this AR has an overall topology, resulting from a magnetic quadrupole, including an hyperbolic flux tube (HFT) configuration which is relatively stable at the time scale of the flare ($\sim 1-2$ hours). A strong QSL, which corresponds to some highly sheared arcades that might be related to the formation of a flux rope, is prominent just before the M6.6 and X2.2 flares, respectively. These facts indicate the close relationship between the strong QSL and the high flare productivity of AR 11158. In addition, with a close inspection of the topology, we found a small-scale HFT which has an inverse tear-drop structure above the aforementioned QSL before the X2.2 flare. It indicates the existence of magnetic flux rope at this place. Even though a global configuration (HFT) is recognized in this AR, it turns out that the large-scale HFT only plays a secondary role during the eruption. In final, we dismiss a trigger based on the breakout model and highlight the central role of the flux rope in the related eruption.

We present SDO/AIA observations of an eruptive X-class flare of July 12, 2012, and compare its evolution with the predictions of a 3D numerical simulation. We focus on the dynamics of flare loops that are seen to undergo slipping reconnection during the flare. In the AIA 131A observations, lower parts of 10 MK flare loops exhibit an apparent motion with velocities of several tens of km/s along the developing flare ribbons. In the early stages of the flare, flare ribbons consist of compact, localized bright transition-region emission from the footpoints of the flare loops. A DEM analysis shows that the flare loops have temperatures up to the formation of Fe XXIV. A series of very long, S-shaped loops erupt, leading to a CME observed by STEREO. The observed dynamics are compared with the evolution of magnetic structures in the "standard solar flare model in 3D". This model matches the observations well, reproducing both the apparently slipping flare loops, S-shaped erupting loops, and the evolution of flare ribbons. All of these processes are explained via 3D reconnection mechanisms resulting from the expansion of a torus-unstable flux rope. The AIA observations and the numerical model are complemented by radio observations showing a noise storm in the metric range. Dm-drifting pulsation structures occurring during the eruption indicate plasmoid ejection and enhancement of reconnection rate. The bursty nature of radio emission shows that the slipping reconnection is still intermittent, although it is observed to persist for more than an hour.

During the rising phase of Solar Cycle 24 tremendous activity occurred on the Sun with fast and compact emergence of magnetic flux leading to bursts of flares (C to M and even X-class). We investigate the violent events occurring in the cluster of two active regions (ARs), NOAA numbers 11121 and 11123, observed in November 2010 with instruments onboard the {\it Solar Dynamics Observatory} and from Earth. Within one day the total magnetic flux increased by $70\%$ with the emergence of new groups of bipoles in AR 11123. From all the events on 11 November, we study, in particular, the ones starting at around 07:16 UT in GOES soft X-ray data and the brightenings preceding them. A magnetic-field topological analysis indicates the presence of null points, associated separatrices and quasi-separatrix layers (QSLs) where magnetic reconnection is prone to occur. The presence of null points is confirmed by a linear and a non-linear force-free magnetic-field model. Their locations and general characteristics are similar in both modelling approaches, which supports their robustness. However, in order to explain the full extension of the analysed event brightenings, which are not restricted to the photospheric traces of the null separatrices, we compute the locations of QSLs. Based on this more complete topological analysis, we propose a scenario to explain the origin of a low-energy event preceding a filament eruption, which is accompanied by a two-ribbon flare, and a consecutive confined flare in AR 11123. The results of our topology computation can also explain the locations of flare ribbons in two other events, one preceding and one following the ones at 07:16 UT. Finally, this study provides further examples where flare-ribbon locations can be explained when compared to QSLs and only, partially, when using separatrices.

We study coherent structures in solar photospheric flows in a plage in the vicinity of the active region AR 10930 using the horizontal velocity data derived from Hinode/SOT magnetograms. Eulerian and Lagrangian coherent structures are detected by computing the Q-criterion and the finite-time Lyapunov exponents of the velocity field, respectively. Our analysis indicates that, on average, the deformation Eulerian coherent structures dominate over the vortical Eulerian coherent structures in the plage region. We demonstrate the correspondence of the network of high magnetic flux concentration to the attracting Lagrangian coherent structures (a-LCS) in the photospheric velocity based on both observations and numerical simulations. In addition, the computation of a-LCS provides a measure of the local rate of contraction/expansion of the flow.

The nature of coronal wave fronts is deeply debated. They are observed in several wavelength bandpasses in spectra, and are frequently interpreted as magnetosonic waves propagating in the lower solar atmosphere. However, they can be attributed to the line of sight projection of the edges of coronal mass ejections. Therefore, the altitude estimation of these features is crucial to discriminate in favor of one of these two interpretations. We take advantage of a set of observations obtained from two different points of view by EUVI/SECCHI/STEREO on December, 7th 2007 to derive the time evolution of the altitude of a coronal wave front. We develop a new technique to compute the altitude. We find that the observed brightness has an increasing altitude during 5 minutes, then the altitude decreases slightly back to the low corona. We interpret the evolution of the altitude as following: the increase of altitude of the wave front is linked to the rise of a bubble like structure whether it is a magnetosonic wave front or a CME in the first phase. During the second phase, the observed brightness is mixed with the brightening of the underlying magnetic structures as the emission of the plasma of the wave front fades due to the plasma dilution with the altitude.

We present the dynamics of two filaments and a C-class flare observed in NOAA 11589 on 2012 October 16. We used the multi-wavelength high-resolution data from SDO, as well as THEMIS and ARIES ground-based observations. The observations show that the filaments are progressively converging towards each other without merging. We find that the filaments have opposite chirality which may have prevented them from merging. On October 16, a C3.3 class flare occurred without the eruption of the filaments. According to the standard solar flare model, after the reconnection, post-flare loops form {\it below} the erupting filaments whether the eruption fails or not. However, the observations show the formation of post-flare loops {\it above} the filaments, which is not consistent with the standard flare model. We analyze the topology of the active region's magnetic field by computing the quasi-separatrix layers (QSLs) using a linear force-free field extrapolation. We find a good agreement between the photospheric footprints of the QSLs and the flare ribbons. We discuss how slipping or slip-running reconnection at the QSLs may explain the observed dynamics.

A broad jet was observed in a weak magnetic field area at the edge of active region NOAA 11106. The peculiar shape and magnetic environment of the broad jet raised the question of whether it was created by the same physical processes of previously studied jets with reconnection occurring high in the corona. We carried out a multi-wavelength analysis using the EUV images from the Atmospheric Imaging Assembly (AIA) and magnetic fields from the Helioseismic and Magnetic Imager (HMI) both on-board the SDO satellite. The jet consisted of many different threads that expanded in around 10 minutes to about 100 Mm in length, with the bright features in later threads moving faster than in the early ones, reaching a maximum speed of about 200 km s^{-1}. Time-slice analysis revealed a striped pattern of dark and bright strands propagating along the jet, along with apparent damped oscillations across the jet. This is suggestive of a (un)twisting motion in the jet, possibly an Alfven wave. A topological analysis of an extrapolated field was performed. Bald patches in field lines, low-altitude flux ropes, diverging flow patterns, and a null point were identified at the basis of the jet. Unlike classical lambda or Eiffel-tower shaped jets that appear to be caused by reconnection in current sheets containing null points, reconnection in regions containing bald patches seems to be crucial in triggering the present jet. There is no observational evidence that the flux ropes detected in the topological analysis were actually being ejected themselves, as occurs in the violent phase of blowout jets; instead, the jet itself may have gained the twist of the flux rope(s) through reconnection. This event may represent a class of jets different from the classical quiescent or blowout jets, but to reach that conclusion, more observational and theoretical work is necessary.

We report an unusual set of observations of waves in a large prominence pillar which consist of pulses propagating perpendicular to the prominence magnetic field. We observe a huge quiescent prominence with the Solar Dynamics Observatory (SDO) Atmospheric Imaging Assembly (AIA) in EUV on 2012 October 10 and only a part of it, the pillar, which is a foot or barb of the prominence, with the Hinode Solar Optical Telescope (SOT) (in Ca II and H\alpha lines), Sac Peak (in H\alpha, H\beta\ and Na-D lines), THEMIS ("T\'elescope H\'eliographique pour l' Etude du Magn\'etisme et des Instabilit\'es Solaires") with the MTR (MulTi-Raies) spectropolarimeter (in He D_3 line). The THEMIS/MTR data indicates that the magnetic field in the pillar is essentially horizontal and the observations in the optical domain show a large number of horizontally aligned features on a much smaller scale than the pillar as a whole. The data is consistent with a model of cool prominence plasma trapped in the dips of horizontal field lines. The SOT and Sac Peak data over the 4 hour observing period show vertical oscillations appearing as wave pulses. These pulses, which include a Doppler signature, move vertically, perpendicular to the field direction, along thin quasi-vertical columns in the much broader pillar. The pulses have a velocity of propagation of about 10 km/s, a period about 300 sec, and a wavelength around 2000 km. We interpret these waves in terms of fast magneto-sonic waves and discuss possible wave drivers.

Three extreme-ultraviolet (EUV) jets recurred in about one hour on 2010 September 17 in the following magnetic polarity of active region 11106. The EUV jets were observed by the Atmospheric Imaging Assembly (AIA) on board the Solar Dynamics Observatory (SDO). The Helioseismic and Magnetic Imager (HMI) on board SDO measured the vector magnetic field, from which we derive the magnetic flux evolution, the photospheric velocity field, and the vertical electric current evolution. The magnetic configuration before the jets is derived by the nonlinear force-free field (NLFFF) extrapolation. We derive that the jets are above a pair of parasitic magnetic bipoles which are continuously driven by photospheric diverging flows. The interaction drove the build up of electric currents that we indeed observed as elongated patterns at the photospheric level. For the first time, the high temporal cadence of HMI allows to follow the evolution of such small currents. In the jet region, we found that the integrated absolute current peaks repetitively in phase with the 171 A flux evolution. The current build up and its decay are both fast, about 10 minutes each, and the current maximum precedes the 171 A by also about 10 minutes. Then, HMI temporal cadence is marginally fast enough to detect such changes. The photospheric current pattern of the jets is found associated to the quasi-separatrix layers deduced from the magnetic extrapolation. From previous theoretical results, the observed diverging flows are expected to build continuously such currents. We conclude that magnetic reconnection occurs periodically, in the current layer created between the emerging bipoles and the large scale active region field. It induced the observed recurrent coronal jets and the decrease of the vertical electric current magnitude.

On 15 May 2005, a huge interplanetary coronal mass ejection (ICME) was observed near Earth. It triggered one of the most intense geomagnetic storms of solar cycle 23 (Dst peak = -263 nT). This structure has been associated with the two-ribbon flare, filament eruption, and coronal mass ejection originating in active region 10759 (NOAA number). We analyze here the sequence of events, from solar wind measurements (at 1 AU) and back to the Sun, to understand the origin and evolution of this geoeffective ICME. From a detailed observational study of in situ magnetic field observations and plasma parameters in the interplanetary (IP) medium and the use of appropriate models we propose an alternative interpretation of the IP observations, different to those discussed in previous studies. In our view, the IP structure is formed by two extremely close consecutive magnetic clouds (MCs) that preserve their identity during their propagation through the interplanetary medium. Consequently, we identify two solar events in H{\alpha} and EUV which occurred in the source region of the MCs. The timing between solar and IP events, as well as the orientation of the MC axes and their associated solar arcades are in good agreement. Additionally, interplanetary radio type II observations allow the tracking of the multiple structures through inner heliosphere and pin down the interaction region to be located midway between the Sun and the Earth. The chain of observations from the photosphere to interplanetary space is in agreement with this scenario. Our analysis allows the detection of the solar sources of the transients and explains the extremely fast changes of the solar wind due to the transport of two attached (though nonmerging) MCs which affect the magnetosphere.

Solar filament eruptions play a crucial role in triggering coronal mass ejections (CMEs). More than 80 % of eruptions lead to a CME. This correlation has been studied extensively during the past solar cycles and the last long solar minimum. The statistics made on events occurring during the rising phase of the new solar cycle 24 is in agreement with this finding. Both filaments and CMEs have been related to twisted magnetic fields. Therefore, nearly all the MHD CME models include a twisted flux tube, called a flux rope. Either the flux rope is present long before the eruption, or it is built up by reconnection of a sheared arcade from the beginning of the eruption. In order to initiate eruptions, different mechanisms have been proposed: new emergence of flux, and/or dispersion of the external magnetic field, and/or reconnection of field lines below or above the flux rope. These mechanisms reduce the downward magnetic tension and favor the rise of the flux rope. Another mechanism is the kink instability when the configuration is twisted too much. In this paper we open a forum of discussions revisiting observational and theoretical papers to understand which mechanisms trigger the eruption. We conclude that all the above quoted mechanisms could bring the flux rope to an unstable state. However, the most efficient mechanism for CMEs is the loss-of-equilibrium or torus instability, when the flux rope has reached an unstable threshold determined by a decay index of the external magnetic field.

Solar flares strongly affect the Sun's atmosphere as well as the Earth's environment. Quantifying the maximum possible energy of solar flares of the present-day Sun, if any, is thus a key question in heliophysics. The largest solar flares observed over the past few decades have reached energies of a few times 10^{32} ergs, possibly up to 10^{33} ergs. Flares in active Sun-like stars reach up to about 10^{36} ergs. In the absence of direct observations of solar flares within this range, complementary methods of investigation are needed. Using historical reports for solar active region, we scaled to observed solar values a realistic dimensionless 3D MHD simulation for eruptive flares, which originate from a highly sheared bipole. This enabled us to calculate the magnetic fluxes and flare energies in the model in a wide paramater space. Firstly, commonly observed solar conditions lead to modeled magnetic fluxes and flare energies that are comparable to those estimated from observations. Secondly, we evaluate from observations that 30% of the area of sunspot groups are typically involved in flares. This is related to the strong fragmentation of these groups, which naturally results from sub-photospheric convection. When the model is scaled to 30% of the area of the largest sunspot group ever reported, with its peak magnetic field being set to the strongest value ever measured in a sunspot, it produces a flare with a maximum energy of ~ 6x10^{33} ergs. The results of the model suggest that the Sun is able to produce flares up to about six times as energetic in total solar irradiance fluence as the strongest directly-observed flare from Nov 4, 2003. Sunspot groups larger than historically reported would yield superflares for spot pairs that would exceed tens of degrees in extent. We thus conjecture that superflare-productive Sun-like stars should have a much stronger dynamo than in the Sun.

We analyze multi-spacecraft observations of a giant filament eruption that occurred during 26 and 27 September 2009. The filament eruption was associated with a relatively slow coronal mass ejection (CME). The filament consisted of a large and a small part, both parts erupted nearly simultaneously. Here we focus on the eruption associated with the larger part of the filament. The STEREO satellites were separated by about 117 degree during this event, so we additionally used SoHO/EIT and CORONAS/TESIS observations as a third eye (Earth view) to aid our measurements. We measure the plane-of-sky trajectory of the filament as seen from STEREO-A and TESIS view-points. Using a simple trigonometric relation, we then use these measurements to estimate the true direction of propagation of the filament which allows us to derive the true R=R_sun v/s time profile of the filament apex. Furthermore, we develop a new tomographic method that can potentially provide a more robust three-dimensional reconstruction by exploiting multiple simultaneous views. We apply this method also to investigate the 3D evolution of the top part of filament. We expect this method to be useful when SDO and STEREO observations are combined. We then analyze the kinematics of the eruptive filament during its rapid acceleration phase by fitting different functional forms to the height-time data derived from the two methods. We find that, for both methods, an exponential function fits the rise profile of the filament slightly better than parabolic or cubic functions. Finally, we confront these results with the predictions of theoretical eruption models.

The Prominence-Corona Transition Region (PCTR) plays a key role in the thermal and pressure equilibrium of solar prominences. Our knowledge of this interface is limited and several major issues remain open, including the thermal structure and, in particular, the maximum temperature of the detectable plasma. The high signal-to-noise ratio of images obtained by the Atmospheric Imaging Assembly (AIA) on NASA's Solar Dynamics Observatory clearly show that prominences are often seen in emission in the 171 and 131 bands. We investigate the temperature sensitivity of these AIA bands for prominence observation, in order to infer the temperature content in an effort to explain the emission. Using the CHIANTI atomic database and previously determined prominence differential emission measure distributions, we build synthetic spectra to establish the main emission-line contributors in the AIA bands. We find that the Fe IX line always dominates the 171 band, even in the absence of plasma at > 10^6 K temperatures, while the 131 band is dominated by Fe VIII. We conclude that the PCTR has sufficient plasma emitting at > 4 10^5 K to be detected by AIA.

We present a multiwavelength study of recurrent surges observed in H{\alpha}, UV (SOHO/EIT) and Radio (Learmonth, Australia) from the super-active region NOAA 10484 on 25 October, 2003. Several bright structures visible in H{\alpha} and UV corresponding to subflares are also observed at the base of each surge. Type III bursts are triggered and RHESSI X-ray sources are evident with surge activity. The major surge consists of the bunches of ejective paths forming a fan-shape region with an angular size of (\approx 65\degree) during its maximum phase. The ejection speed reaches upto \sim200 km/s. The SOHO/MDI magnetograms reveal that a large dipole emerges east side of the active region on 18-20 October 2003, a few days before the surges. On October 25, 2003, the major sunspots were surrounded by "moat regions" with moving magnetic features (MMFs). Parasitic fragmented positive polarities were pushed by the ambient dispersion motion of the MMFs and annihilated with negative polarities at the borders of the moat region of the following spot to produce flares and surges. A topology analysis of the global Sun using PFSS shows that the fan structures visible in the EIT 171 A images follow magnetic field lines connecting the present AR to a preceding AR in the South East. Radio observations of type III bursts indicate that they are coincident with the surges, suggesting that magnetic reconnection is the driver mechanism. The magnetic energy released by reconnection is transformed into plasma heating and provides the kinetic energy for the ejections. A lack of a radio signature in the high corona suggests that the surges are confined to follow the closed field lines in the fans. We conclude that these cool surges may have some local heating effects in the closed loops, but probably play a minor role in global coronal heating and the surge material does not escape to the solar wind.

We study the magnetic field structures of hard X-ray sources and flare ribbons of the M1.1 flare in active region NOAA 10767 on 2005 May 27. We have found in a nonlinear force-free field extrapolation, over the same polarity inversion line, a small pre-eruptive magnetic flux rope located next to sheared magnetic arcades. Ramaty High Energy Solar Spectroscopic Imager (RHESSI) and Transition Region and Coronal Explorer (TRACE) observed this confined flare in the X-ray bands and ultraviolet (UV) 1600 \AA \ bands, respectively. In this event magnetic reconnection occurred at several locations. It first started at the location of the pre-eruptive flux rope. Then, the observations indicate that magnetic reconnection occurred between the pre-eruptive magnetic flux rope and the sheared magnetic arcades more than 10 minutes before the flare peak. It implied the formation of the larger flux rope, as observed with TRACE. Next, hard X-ray (HXR) sources appeared at the footpoints of this larger flux rope at the peak of the flare. The associated high-energy particles may have been accelerated below the flux rope, in or around a reconnection region. Still, the close spatial association between the HXR sources and the flux rope footpoints favors an acceleration within the flux rope. Finally, a topological analysis of a large solar region including the active regions NOAA 10766 and 10767 shows the existence of large-scale Quasi-Separatrix Layers (QSLs) before the eruption of the flux rope. No enhanced emission was found at these QSLs during the flare, but the UV flare ribbons stopped at the border of the closest large-scale QSL.

We report on observations of a solar prominence obtained on 26 April 2007 using the Extreme Ultraviolet Imaging Spectrometer on Hinode. Several regions within the prominence are identified for further analysis. Selected profiles for lines with formation temperatures between log(T)=4.7-6.3, as well as their integrated intensities, are given. The line profiles are discussed. We pay special attention to the He II line which is blended with coronal lines. Our analysis confirms that depression in EUV lines can be interpreted by two mechanisms: absorption of coronal radiation by the hydrogen and neutral helium resonance continua, and emissivity blocking. We present estimates of the He II line integrated intensity in different parts of the prominence according to different scenarios for the relative contribution of absorption and emissivity blocking on the coronal lines blended with the He II line. We estimate the contribution of the He II 256.32 line in the He II raster image to vary between ~44% and 70% of the raster's total intensity in the prominence according to the different models used to take into account the blending coronal lines. The inferred integrated intensities of the He II line are consistent with theoretical intensities obtained with previous 1D non-LTE radiative transfer calculations, yielding a preliminary estimate for the central temperature of 8700 K, central pressure of 0.33 dyn/cm^2, and column mass of 2.5 10^{-4} g/cm^2. The corresponding theoretical hydrogen column density (10^{20} cm^{-2}) is about two orders of magnitude higher than those inferred from the opacity estimates at 195 {\AA}. The non-LTE calculations indicate that the He II 256.32 {\AA} line is essentially formed in the prominence-to-corona transition region by resonant scattering of the incident radiation.

We present and interpret observations of two morphologically homologous flares that occurred in active region (AR) NOAA 10501 on 20 November 2003. Both flares displayed four homologous H-alpha ribbons and were both accompanied by coronal mass ejections (CMEs). The central flare ribbons were located at the site of an emerging bipole in the center of the active region. The negative polarity of this bipole fragmented in two main pieces, one rotating around the positive polarity by ~ 110 deg within 32 hours. We model the coronal magnetic field and compute its topology, using as boundary condition the magnetogram closest in time to each flare. In particular, we calculate the location of quasiseparatrix layers (QSLs) in order to understand the connectivity between the flare ribbons. Though several polarities were present in AR 10501, the global magnetic field topology corresponds to a quadrupolar magnetic field distribution without magnetic null points. For both flares, the photospheric traces of QSLs are similar and match well the locations of the four H-alpha ribbons. This globally unchanged topology and the continuous shearing by the rotating bipole are two key factors responsible for the flare homology. However, our analyses also indicate that different magnetic connectivity domains of the quadrupolar configuration become unstable during each flare, so that magnetic reconnection proceeds differently in both events.

This review paper outlines background information and covers recent advances made via the analysis of spectra and images of prominence plasma and the increased sophistication of non-LTE (ie when there is a departure from Local Thermodynamic Equilibrium) radiative transfer models. We first describe the spectral inversion techniques that have been used to infer the plasma parameters important for the general properties of the prominence plasma in both its cool core and the hotter prominence-corona transition region. We also review studies devoted to the observation of bulk motions of the prominence plasma and to the determination of prominence mass. However, a simple inversion of spectroscopic data usually fails when the lines become optically thick at certain wavelengths. Therefore, complex non-LTE models become necessary. We thus present the basics of non-LTE radiative transfer theory and the associated multi-level radiative transfer problems. The main results of one- and two-dimensional models of the prominences and their fine-structures are presented. We then discuss the energy balance in various prominence models. Finally, we outline the outstanding observational and theoretical questions, and the directions for future progress in our understanding of solar prominences.

The main objective of this paper is to build and compare vector magnetic maps obtained by two spectral polarimeters, i.e. THEMIS/MTR and Hinode SOT/SP, using two inversion codes (UNNOFIT and MELANIE) based on the Milne-Eddington solar atmosphere model. To this end, we used observations of a facular region within active region NOAA 10996 on 23 May 2008, and found consistent results concerning the field strength, azimuth and inclination distributions. Because SOT/SP is free from the seeing effect and has better spatial resolution, we were able to resolve small magnetic polarities with sizes of 1" to 2", and we could detect strong horizontal magnetic fields, which converge or diverge in negative or positive facular polarities. These findings support models which suggest the existence of small vertical flux tube bundles in faculae. A new method is proposed to get the relative formation heights of the multi-lines observed by MTR assuming the validity of a flux tube model for the faculae. We found that the Fe 1 6302.5 \AA line forms at a greater atmospheric height than the Fe 1 5250.2 \AA line.

The STEREO mission has been providing stereoscopic view of filament eruptions in EUV. The clearest view during a filament eruption is seen in He II 304 A observations. One of the main problems visualizing filament dynamics in He II 304 A is the strong background contrast due to surface features. We present a technique that removes background features and leaves behind only the filamentary structure, as seen by STEREO-A and B. The technique uses a pair of STEREO He II 304 A images observed simultaneously. The STEREO-B image is geometrically transformed to STEREO-A view so that the background images appear similar. Filaments being elevated structures, i.e., not lying on the same spherical surface as background features, do not appear similar in the transformed view. Thus, subtracting the two images cancels the background but leaves behind the filament structure. We apply this technique to study the dynamics of the filament eruption event of 22 May 2008, which was observed by STEREO and followed by several ground-based observatories participating in the Joint Observing Programme (JOP 178).

The STEREO mission has been providing stereoscopic view of the filament eruptions in EUV wavelengths. The most extended view during filament eruptions is seen in He II 304 \AA observations, as the filament spine appears darker and sharper. The projected filament width appears differently when viewed from different angles by STEREO satellites. Here, we present a method for estimating the width and inclination of the filament sheet using He II 304 \AA\ observations by STEREO-A and B satellites from the two viewpoints. The width of the filament sheet, when measured from its feet to its apex, gives estimate of filament height above the chromosphere.

Observations and models of solar prominences are reviewed. We focus on non-eruptive prominences, and describe recent progress in four areas of prominence research: (1) magnetic structure deduced from observations and models, (2) the dynamics of prominence plasmas (formation and flows), (3) Magneto-hydrodynamic (MHD) waves in prominences and (4) the formation and large-scale patterns of the filament channels in which prominences are located. Finally, several outstanding issues in prominence research are discussed, along with observations and models required to resolve them.

The dynamics of prominence fine structures is a challenge to understand the formation of cool plasma prominence embedded in the hot corona. Recent observations from the high resolution Hinode/SOT telescope allow us to compute velocities perpendicularly to the line-of-sight or transverse velocities. Combining simultaneous observations obtained in H-alpha with Hinode/SOT and the MSDP spectrograph operating in the Meudon solar tower we derive the velocity vectors of a quiescent prominence. The velocities perpendicular to the line-of-sight are measured by time slice technique, the Dopplershifts by the bisector method. The Dopplershifts of bright threads derived from the MSDP reach 15 km/s at the edges of the prominence and are between +/- 5 km/s in the center of the prominence. Even though they are minimum values due to seeing effect, they are of the same order as the transverse velocities. These measurements are very important because they suggest that the verticalstructures shown in SOT may not be real vertical magnetic structures in the sky plane. The vertical structures could be a pile up of dips in more or less horizontal magnetic field lines in a 3D perspective, as it was proposed by many MHD modelers. In our analysis we also calibrate the Hinode H-alpha data using MSDP observations obtained simultaneously.

The geoeffective magnetic cloud (MC) of 20 November 2003, has been associated to the 18 November 2003, solar active events in previous studies. In some of these, it was estimated that the magnetic helicity carried by the MC had a positive sign, as well as its solar source, active region (AR) NOAA 10501. In this paper we show that the large-scale magnetic field of AR 10501 had a negative helicity sign. Since coronal mass ejections (CMEs) are one of the means by which the Sun ejects magnetic helicity excess into the interplanetary space, the signs of magnetic helicity in the AR and MC should agree. Therefore, this finding contradicts what is expected from magnetic helicity conservation. However, using for the first time correct helicity density maps to determine the spatial distribution of magnetic helicity injection, we show the existence of a localized flux of positive helicity in the southern part of AR 10501. We conclude that positive helicity was ejected from this portion of the AR leading to the observed positive helicity MC.

A filament disappearance event was observed on 22 May 2008 during our recent campaign JOP 178. The filament, situated in the southern hemisphere, showed sinistral chirality consistent with the hemispheric rule. The event was well observed by several observatories in particular by THEMIS. One day before the disappearance, H$\alpha$ observations showed up and down flows in adjacent locations along the filament, which suggest plasma motions along twisted flux rope. THEMIS and GONG observations show shearing photospheric motions leading to magnetic flux canceling around barbs. STEREO A, B spacecraft with separation angle 52.4 degrees, showed quite different views of this untwisting flux rope in He II 304 \AA\ images. Here, we reconstruct the 3D geometry of the filament during its eruption phase using STEREO EUV He II 304 \AA\ images and find that the filament was highly inclined to the solar normal. The He II 304 \AA\ movies show individual threads, which oscillate and rise to an altitude of about 120 Mm with apparent velocities of about 100 km s$^{-1}$, during the rapid evolution phase. Finally, as the flux rope expands into the corona, the filament disappears by becoming optically thin to undetectable levels. No CME was detected by STEREO, only a faint CME was recorded by LASCO at the beginning of the disappearance phase at 02:00 UT, which could be due to partial filament eruption. Further, STEREO Fe XII 195 \AA\ images showed bright loops beneath the filament prior to the disappearance phase, suggesting magnetic reconnection below the flux rope.

We address the formation of 3D nullpoint topologies in the solar corona by combining Hinode/XRT observations of a small dynamic limb event, which occurred beside a non-erupting prominence cavity, with a 3D zero-beta MHD simulation. To this end, we model the boundary-driven kinematic emergence of a compact, intense, and uniformly twisted flux tube into a potential field arcade that overlies a weakly twisted coronal flux rope. The expansion of the emerging flux in the corona gives rise to the formation of a nullpoint at the interface of the emerging and the pre-existing fields. We unveil a two-step reconnection process at the nullpoint that eventually yields the formation of a broad 3D fan-spine configuration above the emerging bipole. The first reconnection involves emerging fields and a set of large-scale arcade field lines. It results in the launch of a torsional MHD wave that propagates along the arcades, and in the formation of a sheared loop system on one side of the emerging flux. The second reconnection occurs between these newly formed loops and remote arcade fields, and yields the formation of a second loop system on the opposite side of the emerging flux. The two loop systems collectively display an anenome pattern that is located below the fan surface. The flux that surrounds the inner spine field line of the nullpoint retains a fraction of the emerged twist, while the remaining twist is evacuated along the reconnected arcades. The nature and timing of the features which occur in the simulation do qualititatively reproduce those observed by XRT in the particular event studied in this paper. Moreover, the two-step reconnection process suggests a new consistent and generic model for the formation of anemone regions in the solar corona.

The aim of this paper is to look at the magnetic helicity structure of an emerging active region and show that both emergence and flaring signatures are consistent with a same sign for magnetic helicity. We present a multi-wavelength analysis of an M1.6 flare occurring in the active region NOAA 10365 on 27 May, 2003, in which a large new bipole emerges in a decaying active region. The diverging flow pattern and the "tongue" shape of the magnetic field in the photosphere with elongated polarities are highly suggestive of the emergence of a twisted flux tube. The orientation of these tongues indicates the emergence of a flux tube with a right hand twist, i.e. positive magnetic helicity. The flare signatures in the chromosphere are ribbons observed in H-alpha by the MSDP spectrograph in the Meudon solar tower and in 1600 A by TRACE. These ribbons have a `J' shape and are shifted along the inversion line. The pattern of these ribbons suggests that the flare was triggered by magnetic reconnection at coronal heights below a twisted flux tube of positive helicity, corresponding to that of the observed emergence. It is the first time that such a consistency between the signatures of the emerging flux through the photosphere and flare ribbons is clearly identified in observations. Another type of ribbons observed during the flare at the periphery of the active region by the MSDP and SOHO/EIT are related to the existence of a null point, which is found high in the corona in a potential field extrapolation. We discuss the interpretation of these secondary brightenings in terms of the "breakout" model and in terms of plasma compression/heating within large-scale separatrices.

We study the influence of large-scale photospheric motions on the estabilization of an eruptive filament, observed on October 6, 7, and 8, 2004, as part of an international observing campaign (JOP 178). Large-scale horizontal flows were invetigated from a series of MDI full-disc Dopplergrams and magnetograms. From the Dopplergrams, we tracked supergranular flow patterns using the local correlation tracking (LCT) technique. We used both LCT and manual tracking of isolated magnetic elements to obtain horizontal velocities from magnetograms. We find that the measured flow fields obtained by the different methods are well-correlated on large scales. The topology of the flow field changed significantly during the filament eruptive phase, suggesting a possible coupling between the surface flow field and the coronal magnetic field. We measured an increase in the shear below the point where the eruption starts and a decrease in shear after the eruption. We find a pattern in the large-scale horizontal flows at the solar surface that interact with differential rotation. We conclude that there is probably a link between changes in surface flow and the disappearance of the eruptive filament.

We present non-LTE diagnostics of the filament observed by SOHO/SUMER on May 27, 2005 in the whole Lyman series. The filament was situated close to the disk center. The Ly_alpha observations were carried out with normal voltage of detector A. The slit was placed at the central part of the detector -- outside the Ly_alpha attenuator. Therefore, the observed profiles of this line could be calibrated reliably.