Fossat et al. (2017) recently reported detecting rotational splitting of g modes indirectly via the interaction with p modes observed directly by the GOLF instrument on SOHO. They concluded that the core of the Sun is rotating 3:8 ? 0:1 times faster than the surrounding radiative envelope. This is startling, partly because such rapid rotation almost contradicts direct inferences from the p-mode rotational splitting inferred from the same data. Moreover, the inferred amplitudes of the g modes appear to exceed the upper bound reported by Appourchaux et al. (2010). It is also suspect because the theory of the procedure implies that the principal modes claimed to have been measured should be undetectable. We point out that there are other interpretations: one leads to a core rotation about twice faster than the surrounding envelope; another, to a core rotating more slowly than the envelope. Here we also report on an independent assessment of the Fossat et al. analysis by applying their procedure to different representations of the GOLF data, expanding on Schunker et al. (2018). We also analyze seismic data obtained from LOI and MDI (both also on SOHO), from HMI (on SDO) and from the ground-based BiSON and GONG, and found the evidence reported by Fossat et al. not to be robust. We also illustrate that merely fitting model spectra to observations, which Fossat et al. do to support their g-mode detections and as Fossat & Schmider (2018) do for extracting additional g-mode splittings, is not necessarily reliable. We are therefore led to doubt the claim.

Solar activity, such as flares, produce bursts of high-energy radiation that temporarily enhance the D-region of the ionosphere and attenuate low-frequency radio waves. To track these Sudden Ionospheric Disturbances (SIDs), which disrupt communication signals and perturb satellite orbits, Scherrer et al. (2008) developed an international, ground-based network of around 500 SID monitors that measure the signal strength of low-frequency radio waves. However, these monitors suffer from a host of noise contamination issues that preclude their use for rigorous scientific analysis. As such, we attempt to create an algorithm to automatically identify noisy, contaminated SID data sets from clean ones. To do so, we develop a set of features to characterize times series measurements from SID monitors and use these features, along with a binary classifer called a support vector machine, to automatically assess the quality of the SID data. We compute the True Skill Score, a metric that measures the performance of our classifier, and find that it is ~0.75+/-0.06. We find features characterizing the difference between the daytime and nighttime signal strength of low-frequency radio waves most effectively discern noisy data sets from clean ones.

We analyze the effect of a sunspot in its quiet surroundings applying a helioseismic technique on almost three years of Helioseismic and Magnetic Imager (HMI) observations obtained during solar cycle 24 to further study the sunspot structure below the solar surface. The attenuation of acoustic waves with frequencies lower than 4.2 mHz depends more strongly on the wave direction at a distance of $6^o-7^o$ from the sunspot center. The amplification of higher frequency waves is highest 6$^o$ away from the active region and it is largely independent of the wave's direction. We observe a mean clockwise flow around active regions, which angular speed decreases exponentially with distance and has a coefficient close to $-0.7$ degree$^{-1}$. The observed horizontal flow in the direction of the nearby active region agrees with a large-scale circulation around the sunspot in the shape of cylindrical shell. The center of the shell seems to be centered around 7$^o$ from the sunspot center, where we observe an inflow close to the surface down to $\sim$2 Mm, followed by an outflow at deeper layers until at least 7 Mm.

The Helioseismic and Magnetic Imager (HMI) instrument is a major component of NASA's Solar Dynamics Observatory (SDO) spacecraft. Since beginning normal science operations on 1 May 2010, HMI has operated with remarkable continuity, e.g. during the more than five years of the SDO prime mission that ended 30 September 2015, HMI collected 98.4% of all possible 45-second velocity maps; minimizing gaps in these full-disk Dopplergrams is crucial for helioseismology. HMI velocity, intensity, and magnetic-field measurements are used in numerous investigations, so understanding the quality of the data is important. We describe the calibration measurements used to track HMI performance and detail trends in important instrument parameters during the mission. Regular calibration sequences provide information used to improve and update the HMI data calibration. The set-point temperature of the instrument front window and optical bench is adjusted regularly to maintain instrument focus, and changes in the temperature-control scheme have been made to improve stability in the observable quantities. The exposure time has been changed to compensate for a 15% decrease in instrument throughput. Measurements of the performance of the shutter and tuning mechanisms show that they are aging as expected and continue to perform according to specification. Parameters of the tunable-optical-filter elements are regularly adjusted to account for drifts in the central wavelength. Frequent measurements of changing CCD-camera characteristics, such as gain and flat field, are used to calibrate the observations. Infrequent expected events, such as eclipses, transits, and spacecraft off-points, interrupt regular instrument operations and provide the opportunity to perform additional calibration. Onboard instrument anomalies are rare and seem to occur quite uniformly in time. The instrument continues to perform very well.

In order to quantify the influence of magnetic fields on acoustic mode parameters and flows in and around active regions, we analyse the differences in the parameters in magnetically quiet regions nearby an active region (which we call `nearby regions'), compared with those of quiet regions at the same disc locations for which there are no neighboring active regions. We also compare the mode parameters in active regions with those in comparably located quiet regions. Our analysis is based on ring diagram analysis of all active regions observed by HMI during almost five years. We find that the frequency at which the mode amplitude changes from attenuation to amplification in the quiet nearby regions is around 4.2 mHz, in contrast to the active regions, for which it is about 5.1 mHz. This amplitude enhancement (the `acoustic halo effect') is as large as that observed in the active regions, and has a very weak dependence on the wave propagation direction. The mode energy difference in nearby regions also changes from a deficit to an excess at around 4.2 mHz, but averages to zero over all modes. The frequency difference in nearby regions increases with increasing frequency until a point at which the frequency shifts turn over sharply as in active regions. However, this turnover occurs around 4.9 mHz, significantly below the acoustic cutoff frequency. Inverting the horizontal flow parameters in the direction of the neighboring active regions, we find flows that are consistent with a model of the thermal energy flow being blocked directly below the active region.

NASA's Solar Dynamics Observatory (SDO) was launched 11 February 2010 with 3 instruments on board, including the Helioseismic and Magnetic Imager (HMI). Since beginning normal operations on 1 May 2010, HMI has observed the Sun's entire visible disk almost continuously. HMI collects sequences of polarized filtergrams taken at a fixed cadence with two 4096 x 4096 cameras from which are computed arcsecond-resolution maps of photospheric observables: the line-of-sight (LoS) velocity and magnetic field, continuum intensity, line width, line depth, and the Stokes polarization parameters, I Q U V, at 6 wavelengths. Two processing pipelines implemented at the SDO Joint Science Operations Center (JSOC) at Stanford University compute observables from calibrated Level-1 filtergrams. One generates LoS quantities every 45s, and the other, primarily for the vector magnetic field, computes averages on a 720s cadence. Corrections are made for static and temporally changing CCD characteristics, bad pixels, image alignment and distortion, polarization irregularities, filter-element uncertainty and non-uniformity, as well as Sun-spacecraft velocity. This report explains issues affecting the resulting physical quantities, describes the impact of regular updates to the instrument calibration, and shows how the computations are optimized for actual HMI observations. During the 5 years of the SDO prime mission, regular calibration sequences have been used to regularly improve and update the instrument calibration and to monitor instrument changes. The instrument more than satisfies the original specifications for data quality and continuity. The procedures described here still have significant room for improvement. The most significant remaining systematic errors are associated with the spacecraft orbital velocity.

A new fitting methodology is presented which is equally well suited for the estimation of low-, medium-, and high-degree mode parameters from $m$-averaged solar oscillation power spectra of widely differing spectral resolution. This method, which we call the "Windowed, MuLTiple-Peak, averaged spectrum", or WMLTP Method, constructs a theoretical profile by convolving the weighted sum of the profiles of the modes appearing in the fitting box with the power spectrum of the window function of the observing run using weights from a leakage matrix that takes into account both observational and physical effects, such as the distortion of modes by solar latitudinal differential rotation. We demonstrate that the WMLTP Method makes substantial improvements in the inferences of the properties of the solar oscillations in comparison with a previous method that employed a single profile to represent each spectral peak. We also present an inversion for the internal solar structure which is based upon 6,366 modes that we have computed using the WMLTP method on the 66-day long 2010 SOHO/MDI Dynamics Run. To improve both the numerical stability and reliability of the inversion we developed a new procedure for the identification and correction of outliers in a frequency data set. We present evidence for a pronounced departure of the sound speed in the outer half of the solar convection zone and in the subsurface shear layer from the radial sound speed profile contained in Model~S of Christensen-Dalsgaard and his collaborators that existed in the rising phase of Solar Cycle~24 during mid-2010.

The Solar Orbiter mission, to be launched in July 2017, will carry a suite of remote sensing and in-situ instruments, including the Polarimetric and Helioseismic Imager (PHI). PHI will deliver high-cadence images of the Sun in intensity and Doppler velocity suitable for carrying out novel helioseismic studies. The orbit of the Solar Orbiter spacecraft will reach a solar latitude of up to 21 deg (up to 34 deg by the end of the extended mission) and thus will enable the first local helioseismology studies of the polar regions. Here we consider an array of science objectives to be addressed by helioseismology within the baseline telemetry allocation (51 Gbit per orbit, current baseline) and within the science observing windows (baseline 3 x 10 days per orbit). A particularly important objective is the measurement of large-scale flows at high latitudes (rotation and meridional flow), which are largely unknown but play an important role in flux transport dynamos. The full range of Earth-Sun-spacecraft angles provided by the orbit will enable helioseismology from two vantage points by combining PHI with another instrument: stereoscopic helioseismology will allow the study of the deep solar interior and a better understanding of the physics of solar oscillations in both quiet Sun and sunspots. We have used a model of the PHI instrument to study its performance for helioseismology applications. As input we used a 6 hr time-series of realistic solar magneto-convection simulation (Stagger code) and the SPINOR radiative transfer code to synthesize the observables. The simulated power spectra of solar oscillations show that the instrument is suitable for helioseismology. In particular, the specified point spread function, image jitter, and photon noise are no obstacle to a successful mission.

Line-of-sight magnetograms from the Helioseismic and Magnetic Imager (HMI) of the Solar Dynamics Observatory (SDO) are analyzed using a diagnostic known as the "Magnetic Range of Influence," or MRoI. The MRoI is a measure of the length over which a photospheric magnetogram is balanced and so its application gives the user a sense of the connective length scales in the outer solar atmosphere. The MRoI maps and histograms inferred from the SDO/HMI magnetograms primarily exhibit four scales: a scale of a few megameters that can be associated with granulation, a scale of a few tens of megameters that can be associated with super-granulation, a scale of many hundreds to thousands of megameters that can be associated with coronal holes and active regions, and a hitherto unnoticed scale that ranges from 100 to 250 megameters. We infer that this final scale is an imprint of the (rotationally-driven) giant convective scale on photospheric magnetism. This scale appears in MRoI maps as well-defined, spatially distributed, concentrations that we have dubbed "g-nodes." Furthermore, using coronal observations from the Atmospheric Imaging Assembly (AIA) on SDO, we see that the vicinity of these g-nodes appears to be a preferred location for the formation of extreme ultraviolet (EUV, and likely X-Ray) brightpoints. These observations and straightforward diagnostics offer the potential of a near-real-time mapping of the Sun's largest convective scale, a scale that possibly reaches to the very bottom of the convective zone.

The Interface Region Imaging Spectrograph (IRIS) small explorer spacecraft provides simultaneous spectra and images of the photosphere, chromosphere, transition region, and corona with 0.33-0.4 arcsec spatial resolution, 2 s temporal resolution and 1 km/s velocity resolution over a field-of-view of up to 175 arcsec x 175 arcsec. IRIS was launched into a Sun-synchronous orbit on 27 June 2013 using a Pegasus-XL rocket and consists of a 19-cm UV telescope that feeds a slit-based dual-bandpass imaging spectrograph. IRIS obtains spectra in passbands from 1332-1358, 1389-1407 and 2783-2834 Angstrom including bright spectral lines formed in the chromosphere (Mg II h 2803 Angstrom and Mg II k 2796 Angstrom) and transition region (C II 1334/1335 Angstrom and Si IV 1394/1403 Angstrom). Slit-jaw images in four different passbands (C II 1330, Si IV 1400, Mg II k 2796 and Mg II wing 2830 Angstrom) can be taken simultaneously with spectral rasters that sample regions up to 130 arcsec x 175 arcsec at a variety of spatial samplings (from 0.33 arcsec and up). IRIS is sensitive to emission from plasma at temperatures between 5000 K and 10 MK and will advance our understanding of the flow of mass and energy through an interface region, formed by the chromosphere and transition region, between the photosphere and corona. This highly structured and dynamic region not only acts as the conduit of all mass and energy feeding into the corona and solar wind, it also requires an order of magnitude more energy to heat than the corona and solar wind combined. The IRIS investigation includes a strong numerical modeling component based on advanced radiative-MHD codes to facilitate interpretation of observations of this complex region. Approximately eight Gbytes of data (after compression) are acquired by IRIS each day and made available for unrestricted use within a few days of the observation.

We report observations of white-light ejecta in the low corona, for two X-class flares on the 2013 May 13, using data from the Helioseismic and Magnetic Imager (HMI) of the Solar Dynamics Observatory. At least two distinct kinds of sources appeared (chromospheric and coronal), in the early and later phases of flare development, in addition to the white-light footpoint sources commonly observed in the lower atmosphere. The gradual emissions have a clear identification with the classical loop-prominence system, but are brighter than expected and possibly seen here in the continuum rather than line emission. We find the HMI flux exceeds the radio/X-ray interpolation of the bremsstrahlung produced in the flare soft X-ray sources by at least one order of magnitude. This implies the participation of cooler sources that can produce free-bound continua and possibly line emission detectable by HMI. One of the early sources dynamically resembles "coronal rain", appearing at a maximum apparent height and moving toward the photosphere at an apparent constant projected speed of 134 $\pm$ 8 $\mathrm{km s^{-1}}$. Not much literature exists on the detection of optical continuum sources above the limb of the Sun by non-coronagraphic instruments, and these observations have potential implications for our basic understanding of flare development, since visible observations can in principle provide high spatial and temporal resolution.

The Helioseismic and Magnetic Imager onboard the Solar Dynamics Observatory (SDO/HMI) provides continuous full-disk observations of solar oscillations. We develop a data-analysis pipeline based on the time-distance helioseismology method to measure acoustic travel times using HMI Doppler-shift observations, and infer solar interior properties by inverting these measurements. The pipeline is used for routine production of near-real-time full-disk maps of subsurface wave-speed perturbations and horizontal flow velocities for depths ranging from 0 to 20 Mm, every eight hours. In addition, Carrington synoptic maps for the subsurface properties are made from these full-disk maps. The pipeline can also be used for selected target areas and time periods. We explain details of the pipeline organization and procedures, including processing of the HMI Doppler observations, measurements of the travel times, inversions, and constructions of the full-disk and synoptic maps. Some initial results from the pipeline, including full-disk flow maps, sunspot subsurface flow fields, and the interior rotation and meridional flow speeds, are presented.

We report observations of a white-light solar flare (SOL2010-06-12T00:57, M2.0) observed by the Helioseismic Magnetic Imager (HMI) on the Solar Dynamics Observatory (SDO) and the Reuven Ramaty High-Energy Solar Spectroscopic Imager (RHESSI). The HMI data give us the first space-based high-resolution imaging spectroscopy of a white-light flare, including continuum, Doppler, and magnetic signatures for the photospheric FeI line at 6173.34{\AA} and its neighboring continuum. In the impulsive phase of the flare, a bright white-light kernel appears in each of the two magnetic footpoints. When the flare occurred, the spectral coverage of the HMI filtergrams (six equidistant samples spanning \pm172m{\AA} around nominal line center) encompassed the line core and the blue continuum sufficiently far from the core to eliminate significant Doppler crosstalk in the latter, which is otherwise a possibility for the extreme conditions in a white-light flare. RHESSI obtained complete hard X-ray and \Upsilon-ray spectra (this was the first \Upsilon-ray flare of Cycle 24). The FeI line appears to be shifted to the blue during the flare but does not go into emission; the contrast is nearly constant across the line profile. We did not detect a seismic wave from this event. The HMI data suggest stepwise changes of the line-of-sight magnetic field in the white-light footpoints.

Thirty-four years of WSO (Wilcox Solar Observatory) and thirteen years of SOHO/MDI (Michelson Doppler Imager on the Solar and Heliospheric Observatory) magnetograms have been studied to measure the east-west inclination angle, indicating the toroidal component of the photospheric magnetic field. This analysis reveals that the large-scale toroidal component of the global magnetic field is antisymmetric around the equator and reverses direction in regions associated with flux from one solar cycle compared to the next. The toroidal field revealed the first early signs of cycle 24 at high latitudes, especially in the northern hemisphere, appearing as far back as 2003 in the WSO data and 2004 in MDI. As in previous cycles, the feature moves gradually equatorward. Cycles overlap and the pattern associated with each cycle lasts about 17 years. Even though the polar field at the current solar minimum is significantly lower than the three previous minima, the toroidal field pattern is similar.

We show that the mean phase of waves propagating all the way from the far side of the Sun to the front side, as measured by seismic holography, varies with time. The change is highly anticorrelated with solar cycle activity and is consistent with other recent results on the variation of the seismic radius of the Sun. The phase change that we observe corresponds to a few kilometers difference in the seismic solar radius from solar maximum to solar minimum in agreement with inferrences from global helioseismology studies.

In time-distance helioseismology, the time signals (Doppler shifts) at two points on the solar surface, separated by a fixed angular distance are cross-correlated, and this leads to a wave packet signal. Accurately measuring the travel times of these wave packets is crucial for inferring the sub-surface properties in the Sun. The observed signal is quite noisy, and to improve the signal-to-noise ratio and make the cross-correlation more robust, the temporal oscillation signal is phase-speed filtered at the two points in order to select waves that travel a fixed horizontal distance. Hence a new formula to estimate the travel times is derived, in the presence of a phase speed filter, and it includes both the radial and horizontal component of the oscillation displacement signal. It generalizes the previously used Gabor wavelet that was derived without a phase speed filter and included only the radial component of the displacement. This is important since it will be consistent with the observed cross-correlation that is computed using a phase speed filter, and also it accounts for both the components of the displacement. The new formula depends on the location of the two points on the solar surface that are being cross correlated and accounts for the travel time shifts at different locations on the solar surface.

We show that the use of Doppler shifts of Zeeman sensitive spectral lines to observe wavesn in sunspots is subject to measurement specific phase shifts arising from, (i) altered height range of spectral line formation and the propagating character of p mode waves in penumbrae, and (ii) Zeeman broadening and splitting. We also show that these phase shifts depend on wave frequencies, strengths and line of sight inclination of magnetic field, and the polarization state used for Doppler measurements. We discuss how these phase shifts could contribute to local helioseismic measurements of 'surface effects' in sunspot seismology.

We investigate the accuracy to which we can retrieve the solar photospheric magnetic field vector using the Helioseismic and Magnetic Imager (HMI) that will fly onboard of the Solar Dynamics Observatory (SDO) by inverting simulated HMI profiles. The simulated profiles realistically take into account the effects of the photon noise, limited spectral resolution, instrumental polarization modulation, solar p modes and temporal averaging. The accuracy of the determination of the magnetic field vector is studied considering the different operational modes of the instrument.

We present a study of two spectral lines, Fe I 6173 Angstroms and Ni I 6768 Angstroms, that were candidates to be used in the Helioseismic and Magnetic Imager (HMI) for observing Doppler velocity and the vector magnetic field. The line profiles were studied using the Mt. Wilson Observatory, the Advanced Stokes Polarimeter and the Kitt Peak McMath telescope and one meter Fourier transform spectrometer atlas. Both Fe I and Ni I profiles have clean continua and no blends that threaten instrument performance. The Fe I line is 2% deeper, 15% narrower and has a 6% smaller equivalent width than the Ni I line. The potential of each spectral line to recover pre-assigned solar conditions is tested using a least-squares minimization technique to fit Milne-Eddington models to tens of thousands of line profiles that have been sampled at five spectral positions across the line. Overall, the Fe I line has a better performance than the Ni I line for vector magnetic field retrieval. We selected the Fe I spectral line for use in HMI due to its better performance for magnetic diagnostics while not sacrificing velocity information.

The Helioseismic and Magnetic Imager (HMI), on board the Solar Dynamics Observatory (SDO), will begin data acquisition in 2008. It will provide the first full disk, high temporal cadence observations of the full Stokes vector with a 0.5 arc sec pixel size. This will allow for a continuous monitoring of the Solar magnetic field vector. HMI data will advance our understanding of the small and large-scale magnetic field evolution, its relation to the solar and global dynamic processes, coronal field extrapolations, flux emergence, magnetic helicity and the nature of the polar magnetic fields. We summarize HMI's expected operation modes, focusing on the polarization cross-talk induced by the solar oscillations and how this affects the magnetic field vector determinations.

White-light observations of the solar corona show that there are two characteristic types of Coronal Mass Ejections (CMEs) in terms of speed-height profiles: so-called fast CMEs that attain high speeds low in the corona and slow CMEs that gradually accelerate from low initial speeds. Low and Zhang (2002) have recently proposed that fast and slow CMEs result from initial states with magnetic configurations characterized by normal prominences (NPs) and inverse prominences (IPs), respectively. To test their theory, we employed a two-dimensional, time-dependent, resistive magnetohydrodynamic code to simulate the expulsion of CMEs in these two different prominence environments. Our numerical simulations demonstrate that (i) a CME-like expulsion is more readily produced in an NP than in an IP environment, and, (ii) a CME originating from an NP environment tends to have a higher speed early in the event than one originating from an IP environment. Magnetic reconnection plays distinct roles in the two different field topologies of these two environments to produce their characteristic CME speed-height profiles. Our numerical simulations support the proposal of Low and Zhang (2002) although the reconnection development for the NP associated CME is different from the one sketched in their theory. Observational implications of our simulations are discussed.

The 11-year cycle of solar activity follows Hale's law by reversing the magnetic polarity of leading and following sunspots in bipolar regions during the minima of activity. In the 1996-97 solar minimum, most solar activity emerged in narrow longitudinal zones - `active longitudes' but over a range in latitude. Investigating the distribution of solar magnetic flux, we have found that the Hale sunspot polarity reversal first occurred in these active zones. We have estimated the rotation rates of the magnetic flux in the active zones before and after the polarity reversal. Comparing these rotation rates with the internal rotation inferred by helioseismology, we suggest that both `old' and `new' magnetic fluxes were probably generated in a low-latitude zone near the base of the solar convection zone. The reversal of active region polarity observed in certain longitudes at the beginning of a new solar cycle suggests that the phenomenon of active longitudes may give fundamental information about the mechanism of the solar cycle. The non-random distribution of old-cycle and new-cycle fluxes presents a challenge for dynamo theories, most of which assume a uniform longitudinal distribution of solar magnetic fields.