Metis is the first solar coronagraph designed for a space mission capable of performing simultaneous imaging of the off-limb solar corona in both visible and UV light. The observations obtained with Metis aboard the Solar Orbiter ESA-NASA observatory will enable us to diagnose, with unprecedented temporal coverage and spatial resolution, the structures and dynamics of the full corona from 1.7 $R_\odot$ to about 9 $R_\odot$. Due to the uniqueness of the Solar Orbiter mission profile, Metis will be able to observe the solar corona from a close vantage point (down to 0.28 AU), achieving out-of-ecliptic views with the increase of the orbit inclination over time. Moreover, observations near perihelion, during the phase of lower rotational velocity of the solar surface relative to the spacecraft, will allow longer-term studies of the coronal features. Thanks to a novel occultation design and a combination of a UV interference coating of the mirrors and a spectral bandpass filter, Metis images the solar corona simultaneously in the visible light band, between 580 and 640 nm, and in the UV H I Lyman-{\alpha} line at 121.6 nm. The coronal images in both the UV Lyman-{\alpha} and polarised visible light are obtained at high spatial resolution with a spatial scale down to about 2000 km and 15000 km at perihelion, in the cases of the visible and UV light, respectively. A temporal resolution down to 1 second can be achieved when observing coronal fluctuations in visible light. The Metis measurements will allow for complete characterisation of the main physical parameters and dynamics of the electron and neutral hydrogen/proton plasma components of the corona in the region where the solar wind undergoes acceleration and where the onset and initial propagation of coronal mass ejections take place, thus significantly improving our understanding of the region connecting the Sun to the heliosphere.

The magnetic field shapes the structure of the solar corona but we still know little about the interrelationships between the coronal magnetic field configurations and the resulting quasi-stationary structures observed in coronagraphic images (as streamers, plumes, coronal holes). One way to obtain information on the large-scale structure of the coronal magnetic field is to extrapolate it from photospheric data and compare the results with coronagraphic images. Our aim is to verify if this comparison can be a fast method to check systematically the reliability of the many methods available to reconstruct the coronal magnetic field. Coronal fields are usually extrapolated from photospheric measurements typically in a region close to the central meridian on the solar disk and then compared with coronagraphic images at the limbs, acquired at least 7 days before or after to account for solar rotation, implicitly assuming that no significant changes occurred in the corona during that period. In this work, we combine images from three coronagraphs (SOHO/LASCO-C2 and the two STEREO/SECCHI-COR1) observing the Sun from different viewing angles to build Carrington maps covering the entire corona to reduce the effect of temporal evolution to ~ 5 days. We then compare the position of the observed streamers in these Carrington maps with that of the neutral lines obtained from four different magnetic field extrapolations, to evaluate the performances of the latter in the solar corona. Our results show that the location of coronal streamers can provide important indications to discriminate between different magnetic field extrapolations.

The Laser Interferometer Space Antenna is a foreseen space-based gravitational wave detector, which aims to detect 10^20 strains in the frequency range from 0.1 mHz to 1 Hz. It is a triangular constellation of three spacecraft, with equal sides of 2,5 x 10^9 m, where every spacecraft hosts a pair of telescopes that simultaneously transmit and receive laser beams measuring the constellation arms by heterodyning the received wavefronts with local references. Due to the spacecraft and constellation jitters, the interfering (received and local) wavefronts become misaligned. We investigate analytically the coupling between misalignments and aberrations of the interfering wavefronts and estimate the relevant contribution to the noise of the heterodyne signal.

The Laser Interferometer Space Antenna is a foreseen gravitational wave detector, which aims to detect $10^{-20}$ strains in the frequency range from 0.1 mHz to 1 Hz. It is a triangular constellation, with equal sides of $2,5 \times 10^9$ m, of three spacecraft, where heterodyne interferometry measures the spacecraft distances. The stray light from the powerful transmitted beam can overlap with the received one and interfere with the heterodyne signal. We investigated the contribution of random phase variations of the stray photons to the noise of the heterodyne signal. A balanced detection scheme more effectively mitigates this adverse effect than a separation of the frequencies of the transmitted and local radiation. In the balanced scheme, in order to limit the phase noise to picometer level, the incoherent power of the stray light must be kept below about 10 nW/W for an asymmetry of the recombination beam splitter of 1%.

Context. The Mg I 4571 {\AA} line and the b triplet are denoted in the literature as diagnostics of solar and stellar activity since their formation is in the low chromosphere. Aims. To investigate the potential of these four spectral lines as diagnostics of chromospheric activity in solar-like stars, studying the dependence of the intensity of these lines from local atmospheric changes by varying atmospheric models and stellar parameters. Methods. Starting with Next-Gen photospheric models, we build a grid of atmospheric models including photosphere, chromosphere and transition region and solve the radiative transfer to obtain synthetic profiles to compare with observed spectra of main-sequence, solar like stars with effective temperatures in the range 4800-6400 K, solar gravity and solar metallicity. Results. We find that the Mg I 4571 {\AA} line is significantly sensitive to local changes in the atmospheric model around the minimum temperature. Instead, the lines of the b triplet do not show significant responses to changes on the local atmospheric structure.

We investigate the increase of the DEM (differential emission measure) towards the chromosphere due to small and cool magnetic loops (height $\lesssim8$~Mm, $T\lesssim10^5$~K). In a previous paper we analysed the conditions of existence and stability of these loops through hydrodynamic simulations, focusing on their dependence on the details of the optically thin radiative loss function used. In this paper, we extend those hydrodynamic simulations to verify if this class of loops exists and it is stable when using an optically thick radiative loss function. We study two cases: constant background heating and a heating depending on the density. The contribution to the transition region EUV output of these loops is also calculated and presented. We find that stable, quasi-static cool loops can be obtained by using an optically thick radiative loss function and a background heating depending on the density. The DEMs of these loops, however, fail to reproduce the observed DEM for temperatures between $4.6<\log T<4.8$. We also show the transient phase of a dynamic loop obtained by considering constant heating rate and find that its average DEM, interpreted as a set of evolving dynamic loops, reproduces quite well the observed DEM.

While the magnetic field in quiescent prominences has been widely investigated, less is known about the field in activated prominences. We introduce observational results on the magnetic field structure of an activated filament in a flaring active region. We study, in particular, its magnetic structure and line-of-sight flows during its early activated phase, shortly before it displays signs of rotation. We invert the Stokes profiles of the chromospheric He I 10830 A triplet and the photospheric Si I 10827 A line observed in this filament by the VTT on Tenerife. Using these inversion results we present and interpret the first maps of velocity and magnetic field obtained in an activated filament, both in the photosphere and the chromosphere. Up to 5 different magnetic components are found in the chromospheric layers of the filament, while outside the filament a single component is sufficient to reproduce the observations. Magnetic components displaying an upflow are preferentially located towards the centre of the filament, while the downflows are concentrated along its periphery. Also, the upflowing gas is associated with an opposite-polarity magnetic configuration with respect to the photosphere, while the downflowing gas is associated with a same-polarity configuration. The activated filament has a rather complex structure. Nonetheless, it is compatible with a flux rope, although with a distorted one, in the normal configuration. The observations are best explained by a rising flux rope in which a part of the filament material is still stably stored (upflowing material, rising with the field), while a part is no longer stably stored and flows down along the field lines.

In the last 30 years, the existence of small and cool magnetic loops (height < 8 Mm, T < 10^5 K) has been proposed and debated to explain the increase of the DEM (differential emission measure) towards the chromosphere. We present hydrodynamic simulations of low-lying cool loops to study their conditions of existence and stability, and their contribution to the transition region EUV output. We find that stable, quasi-static cool loops (with velocities < 1 km/s) can be obtained under different and more realistic assumptions on the radiative losses function with respect to previous works. A mixture of the DEMs of these cool loops plus intermediate loops with temperatures between 10^5 and 10^6 K can reproduce the observed emission of the lower transition region at the critical turn-up temperature point (T ~ 2x10^5 K) and below T = 10^5 K.

The Paschen-Back effect influences the Zeeman sublevels of the He I multiplet at 10830 {\AA}, leading to changes in strength and in position of the Zeeman components of these lines. We illustrate the relevance of this effect using synthetic Stokes profiles of the He I 10830 {\AA} multiplet lines and investigate its influence on the inversion of polarimetric data. We invert data obtained with the Tenerife Infrared Polarimeter (TIP) at the German Vacuum Tower Telescope (VTT). We compare the results of inversions based on synthetic profiles calculated with and without the Paschen-Back effect being included. We find that when taking into account the incomplete Paschen-Back effect, on average 16% higher field strength values are obtained. We also show that this effect is not the main cause for the area asymmetry exhibited by many He I 10830 Stokes V-profiles. This points to the importance of velocity and magnetic field gradients over the formation height range of these lines.

We present new spectropolarimetric observations of the chromospheric He I 10830 {\AA} multiplet observed in a filament during its phase of activity. The data were recorded with the new Tenerife Infrared Polarimeter (TIP-II) at the German Vacuum Tower Telescope (VTT) on 2005 May 18. We inverted the He Stokes profiles using multiple atmospheric components. The observed He Stokes profiles display a remarkably wide variety of shapes. Most of the profiles show very broad Stokes I absorptions and complex and spatially variable Stokes V signatures. The inversion of the profiles shows evidence of different atmospheric blue- and redshifted components of the He I lines within the resolution element (1 arcsec), with supersonic velocities of up to 100 km/s. Up to five different atmospheric components are found in the same profile. We show that even these complex profiles can be reliably inverted.