We have considered a FLRW Universe filled with a single fluid, known as logotropic dark fluid (LDF), whose pressure evolves through a logarithmic equation of state. We use the latest Hubble data to constrain the parameters of this model, the present fraction of dark matter Omega_{m0} and the Hubble constant H_0. We find that the best-fit values of these parameters are Omega_{m0}=0.253 and H_{0}=70.35 kms^{-1}Mpc^{-1}, which is approximately the mean value of the global and local measurements of H_0 at the 1sigma C.L. The best-fit values obtained from this dataset are then applied to examine the evolutionary history of the logotropic equation of state and the deceleration parameter. Our study shows that the Universe is indeed undergoing an accelerated expansion phase following the decelerated one. We also measure the redshift of this transition (i.e., the cosmological deceleration-acceleration transition) z_t=0.81 and is well consistent with the present observations. Interestingly, we find that the Universe will settle down to a LCDM model in future and there will not be any future singularity in the LDF model. Furthermore, we compare the LDF and LCDM models. We notice that there is no significant difference between the LDF and LCDM models at the present epoch, but the difference (at the percent level) between these models is found as the redshift increases. These dynamical features of the LDF can be effective in determining the late-time evolution of the Universe and thus may provide an answer to the coincidence problem. We have also studied the generalized second law of thermodynamics at the dynamical apparent horizon for the LDF model with the Bekenstein and Viaggiu entropies. Our analysis has yielded a thermodynamically allowable range for the parameter B, 0 leq B leq 0.339, thereby supporting the value, B=3.53 \times 10^{-3} obtained by Chavanis from galactic observations[16].

We present analytical exploration of novel activation functions as consequence of integration of several ideas leading to implementation and subsequent use in habitability classification of exoplanets. Neural networks, although a powerful engine in supervised methods, often require expensive tuning efforts for optimized performance. Habitability classes are hard to discriminate, especially when attributes used as hard markers of separation are removed from the data set. The solution is approached from the point of investigating analytical properties of the proposed activation functions. The theory of ordinary differential equations and fixed point are exploited to justify the "lack of tuning efforts" to achieve optimal performance compared to traditional activation functions. Additionally, the relationship between the proposed activation functions and the more popular ones is established through extensive analytical and empirical evidence. Finally, the activation functions have been implemented in plain vanilla feed-forward neural network to classify exoplanets.

We explore the efficacy of using a novel activation function in Artificial Neural Networks (ANN) in characterizing exoplanets into different classes. We call this Saha-Bora Activation Function (SBAF) as the motivation is derived from long standing understanding of using advanced calculus in modeling habitability score of Exoplanets. The function is demonstrated to possess nice analytical properties and doesn't seem to suffer from local oscillation problems. The manuscript presents the analytical properties of the activation function and the architecture implemented on the function. Keywords: Astroinformatics, Machine Learning, Exoplanets, ANN, Activation Function.

The search for life has two goals essentially: looking for planets with Earth-like conditions (Earth similarity) and looking for the possibility of life in some form (habitability). Determining habitability from exoplanet data requires that determining parameters are collectively considered before coming up with a conclusion as no single factor alone contributes to it. Our proposed models, would serve as an indicator while looking for new habitable worlds, if computed with precision and efficiency. The models are of the type constrained optimization, multivariate, convex but may suffer from curvature violation and premature convergence impacting desired habitability scores. We mitigate the problem by proposing modified Particle Swarm Optimization (PSO) to tackle constraints and ensuring global optima. In the process, a python library to tackle such problems has been created.

We explore the efficacy of machine learning (ML) in characterizing exoplanets into different classes. The source of the data used in this work is University of Puerto Rico's Planetary Habitability Laboratory's Exoplanets Catalog (PHL-EC). We perform a detailed analysis of the structure of the data and propose methods that can be used to effectively categorize new exoplanet samples. Our contributions are two fold. We elaborate on the results obtained by using ML algorithms by stating the accuracy of each method used and propose the best paradigm to automate the task of exoplanet classification. The exploration led to the development of new methods fundamental and relevant to the context of the problem and beyond. Data exploration and experimentation methods also result in the development of a general data methodology and a set of best practices which can be used for exploratory data analysis experiments.

We present an analytical comparison of the Cobb-Douglas Habitability Production Function (CD-HPF) and the Earth Similarity Index (ESI). The key differences between the ESI and CD-HPF are highlighted and based on mathematical analysis, we show that the CD-HPF satisfies the conditions for model scalability and stability but the ESI does not. Using visualizations, we also demonstrate that there do not exist any causal relationships between the ESI and CD-HPF. The conclusion from the work done is that the CD-HPF and ESI do not share any sensible relationship and that both should be used independently.

We present the results of various automated classification methods, based on machine learning (ML), of objects from data releases 6 and 7 (DR6 and DR7) of the Sloan Digital Sky Survey (SDSS), primarily distinguishing stars from quasars. We provide a careful scrutiny of approaches available in the literature and have highlighted the pitfalls in those approaches based on the nature of data used for the study. The aim is to investigate the appropriateness of the application of certain ML methods. The manuscript argues convincingly in favor of the efficacy of asymmetric AdaBoost to classify photometric data. The paper presents a critical review of existing study and puts forward an application of asymmetric AdaBoost, as an offspring of that exercise.

Seven Earth-sized planets, TRAPPIST-1 system, were discovered in February 2017. Three of these planets are in the habitable zone (HZ) of their star, making them potentially habitable planets a mere 40 light years away. Discovery of the closest potentially habitable planet to us just a year before -- Proxima~b, and a realization that Earth-type planets in HZ are a common occurrence provides the impetus to the pursuit for life outside the Solar System. The search for life has two goals: Earth similarity and habitability. An index was recently proposed, Cobb-Douglas Habitability Score (CDHS), based on Cobb-Douglas production function, which computes the habitability score by using measured and estimated planetary parameters like radius, density, escape velocity and surface temperature of a planet. The proposed metric with exponents accounting for metric elasticity, is endowed with analytical properties that ensure global optima and can be scaled to accommodate a finite number of input parameters. We show that the model is elastic, and the conditions on elasticity to ensure global maxima can scale as the number of predictor parameters increase. K-Nearest Neighbour classification algorithm, embellished with probabilistic herding and thresholding restriction, utilizes CDHS scores and labels exoplanets to appropriate classes via feature-learning methods. The algorithm works on top of a decision-theoretical model using the power of convex optimization and machine learning. A second approach, based on a novel feature-learning and tree-building method classifies the same planets without computing the CDHS of the planets and produces a similar outcome. The convergence of the two different approaches indicates the strength of the proposed scheme and the likelihood of the potential habitability of the recent discoveries.

Solar prominences are magnetic structures incarcerating cool and dense gas in an otherwise hot solar corona. Prominences can be categorized as quiescent and active. Their origin and the presence of cool gas (~$10^4$K) within the hot (~$10^6$K) solar corona remains poorly understood. The structure and dynamics of solar prominences was investigated in a large number of observational and theoretical (both analytical and numerical) studies. In this paper, an analytic model of quiescent solar prominence is developed and used to demonstrate that the prominence velocity increases exponentially, which means that some gas falls downward towards the solar surface, and that Alfven waves are naturally present in the solar prominences. These theoretical predictions are consistent with the current observational data of solar quiescent prominences.

Supernova (SN) neutrinos can excite the nuclei of various detector materials beyond their neutron emission thresholds through charged current (CC) and neutral current (NC) interactions. The emitted neutrons, if detected, can be a signal for the supernova event. Here we present the results of our study of SN neutrino detection through the neutron channel in lead ($^{208} {\rm Pb}$) and iron ($^{56} {\rm Fe}$) detectors for realistic neutrino fluxes and energies given by the recent Basel/Darmstadt simulations for a 18 solar mass progenitor SN at a distance of 10 kpc. We find that, in general, the number of neutrons emitted per kTon of detector material for the neutrino luminosities and average energies of the different neutrino species as given by the Basel/Darmstadt simulations are significantly lower than those estimated in previous studies based on the results of earlier SN simulations. At the same time, we highlight the fact that, although the total number of neutrons produced per kTon in a iron detector is more than an order of magnitude lower than that for lead, the dominance of the flavor blind NC events in the case of iron, as opposed to dominance of $\nu_e$ induced CC events in the case of lead, offers a complementarity between the two detector materials so that simultaneous detection of SN neutrinos in a lead and a sufficiently large iron detector suitably instrumented for neutron detection may allow estimating the fraction of the total $\mu$ and $\tau$ flavored neutrinos in the SN neutrino flux and thereby probing the emission mechanism as well as flavor oscillation scenarios of the SN neutrinos.

The search for life on the planets outside the Solar System can be broadly classified into the following: looking for Earth-like conditions or the planets similar to the Earth (Earth similarity), and looking for the possibility of life in a form known or unknown to us (habitability). The two frequently used indices, ESI and PHI, describe heuristic methods to score similarity/habitability in the efforts to categorize different exoplanets or exomoons. ESI, in particular, considers Earth as the reference frame for habitability and is a quick screening tool to categorize and measure physical similarity of any planetary body with the Earth. The PHI assesses the probability that life in some form may exist on any given world, and is based on the essential requirements of known life: a stable and protected substrate, energy, appropriate chemistry and a liquid medium. We propose here a different metric, a Cobb-Douglas Habitability Score (CDHS), based on Cobb-Douglas habitability production function (CD-HPF), which computes the habitability score by using measured and calculated planetary input parameters. The proposed metric, with exponents accounting for metric elasticity, is endowed with verifiable analytical properties that ensure global optima, and is scalable to accommodate finitely many input parameters. The model is elastic, does not suffer from curvature violations and, as we discovered, the standard PHI is a special case of CDHS. Computed CDHS scores are fed to K-NN (K-Nearest Neighbour) classification algorithm with probabilistic herding that facilitates the assignment of exoplanets to appropriate classes via supervised feature learning methods, producing granular clusters of habitability. The proposed work describes a decision-theoretical model using the power of convex optimization and algorithmic machine learning.

Astroinformatics is a new impact area in the world of astronomy, occasionally called the final frontier, where several astrophysicists, statisticians and computer scientists work together to tackle various data intensive astronomical problems. Exponential growth in the data volume and increased complexity of the data augments difficult questions to the existing challenges. Classical problems in Astronomy are compounded by accumulation of astronomical volume of complex data, rendering the task of classification and interpretation incredibly laborious. The presence of noise in the data makes analysis and interpretation even more arduous. Machine learning algorithms and data analytic techniques provide the right platform for the challenges posed by these problems. A diverse range of open problem like star-galaxy separation, detection and classification of exoplanets, classification of supernovae is discussed. The focus of the paper is the applicability and efficacy of various machine learning algorithms like K Nearest Neighbor (KNN), random forest (RF), decision tree (DT), Support Vector Machine (SVM), Na\"ive Bayes and Linear Discriminant Analysis (LDA) in analysis and inference of the decision theoretic problems in Astronomy. The machine learning algorithms, integrated into ASTROMLSKIT, a toolkit developed in the course of the work, have been used to analyze HabCat data and supernovae data. Accuracy has been found to be appreciably good.

Multi-transonic accretion for a spinning black hole has been compared among different disc geometries within post Newtonian pseudo potential framework. The variation of stationary shock characteristics with black hole spin has been studied in details for all the disc models and compared for adiabatic as well as for isothermal scenario. The variations of surface gravity with spin for all these cases have also been investigated.

Optical stellar interferometers have demonstrated milli-arcsecond resolution with few apertures spaced hundreds of meters apart. To obtain rich direct images, many apertures will be needed, for a better sampling of the incoming wavefront. The coherent imaging thus achievable improves the sensitivity with respect to the incoherent combination of successive fringed exposures. Efficient use of highly diluted apertures for coherent imaging can be done with pupil densification, a technique also called 'hypertelescope imaging'. Although best done with adaptive phasing, concentrating most energy in a dominant interference peak for a rich direct image of a complex source, such imaging is also possible with random phase errors such as caused by turbulent 'seeing', using methods such as speckle imaging which uses several short exposure images to reconstruct the true image. We have simulated such observations using an aperture which changes through the night, as naturally happens on Earth with fixed grounded mirror elements, and find that reconstructed images of star clusters and extended objects are of high quality. As part of the study we also estimated the required photon levels for achieving a good signal to noise ratio using such a technique.

Speckle Imaging based on triple correlation is a very efficient image reconstruction technique which is used to retrieve Fourier phase information of the object in presence of atmospheric turbulence. We have developed both Direct Bispectrum and Radon transform based Tomographic speckle masking algorithms to retrieve atmospherically distorted astronomical images. The latter is a much computationally efficient technique because it works with one dimensional image projections. Tomographic speckle imaging provides good image recovery like direct bispectrum but with a large improvement in computational time and memory requirements. The algorithms were compared with speckle simulations of aperture masking interferometry with 17 sub-apertures using different objects. The results of the computationally efficient tomographic technique with laboratory and real astronomical speckle images are also discussed.

We conducted a multi-wavelength campaign in September-October, 2002, to observe SS 433. We used 45 meter sized 30 dishes of Giant Meter Radio Telescope (GMRT) for radio observation, 1.2 meter Physical Research Laboratory Infra-red telescope at Mt Abu for IR, 1 meter Telescope at the State Observatory, Nainital for Optical photometry, 2.3 meter optical telescope at the Vainu Bappu observatory for spectrum and Rossi X-ray Timing Explorer (RXTE) Target of Opportunity (TOO) observation for X-ray observations. We find sharp variations in intensity in time-scales of a few minutes in X-rays, IR and radio wavelengths. Differential photometry at the IR observation clearly indicated significant intrinsic variations in short time scales of minutes throughout the campaign. Combining results of these wavelengths, we find a signature of delay of about two days between IR and Radio. The X-ray spectrum yielded double Fe line profiles which corresponded to red and blue components of the relativistic jet. We also present the broadband spectrum averaged over the campaign duration.

This article begins with the discussions on the formation of speckles in the case of non-coherent quasi monochromatic source and of ways to detect them. Prior to this, a brief introduction on the behavior of the atmosphere and its effect on the plane wavefront from a stellar source is presented. The benefit of short-exposure images over long exposure is highlighted with emphasis set on their comparison as well. The data processing methods that are implemented in our institute in order to decipher both Fourier modulus and Fourier phase are described. The salient features of the adaptive optics system that compensates the atmospheric effects on the image in real time are discussed. The article concludes after a brief discussion on certain astrophysical problems that can be targeted using moderate sized telescopes available in India, such as 2.34 meter Vainu Bappu Telescope (VBT), Kavalur, 2 meter Himalayan Chandra Telescope (HCT), Hanley.

A new generation CCD detector called low light level CCD (L3CCD) that performs like an intensified CCD without incorporating a micro channel plate (MCP) for light amplification was procured and tested. A series of short exposure images with millisecond integration time has been obtained. The L3CCD is cooled to about $-80^\circ$ C by Peltier cooling.

Speckle interferometric technique is employed to record a series of hundreds of short-exposure images of several close binary stars with sub-arcsecond separation through a narrow band filter at the Cassegrain focus of the 2.34 meter (m) Vainu Bappu telescope (VBT), situated at Vainu Bappu Observatory (VBO), Kavalur, India. The data are recorded sequentially by a Peltier-cooled intensified CCD camera with 10 ms exposure. The auto-correlation method is applied to determine the angular separations and position angles of these binary systems.

The present `state of the art' and the path to future progress in high spatial resolution imaging interferometry is reviewed. The review begins with a treatment of the fundamentals of stellar optical interferometry, the origin, properties, optical effects of turbulence in the Earth's atmosphere, the passive methods that are applied on a single telescope to overcome atmospheric image degradation such as speckle interferometry, and various other techniques. These topics include differential speckle interferometry, speckle spectroscopy and polarimetry, phase diversity, wavefront shearing interferometry, phase-closure methods, dark speckle imaging, as well as the limitations imposed by the detectors on the performance of speckle imaging. A brief account is given of the technological innovation of adaptive-optics (AO) to compensate such atmospheric effects on the image in real time. A major advancement involves the transition from single-aperture to the dilute-aperture interferometry using multiple telescopes. Therefore, the review deals with recent developments involving ground-based, and space-based optical arrays. Emphasis is placed on the problems specific to delay-lines, beam recombination, polarization, dispersion, fringe-tracking, bootstrapping, coherencing and cophasing, and recovery of the visibility functions. The role of AO in enhancing visibilities is also discussed. The applications of interferometry, such as imaging, astrometry, and nulling are described. The mathematical intricacies of the various `post-detection' image-processing techniques are examined critically. The review concludes with a discussion of the astrophysical importance and the perspectives of interferometry.

Speckle interferometric technique is used to record a series of short exposure images of several close binary stars with sub-arcsecond separation through a narrow band filter centred at H$\alpha$ at the Cassegrain focus of the 2.34 meter Vainu Bappu telescope (VBT), situated at Vainu Bappu Observatory (VBO), Kavalur. The auto-correlation method is developed under Image Reduction Analysis Facility (IRAF). Wiener filter is included in the programme to eliminate spurious high frequency contributions; a few sets of data provide the optimised results. The auto-correlated image of these stars gives the separation of the binary components.

This article is a sort of sequel of the earlier extensive review by Saha (1999a) where emphasis was laid down on the ground based single aperture, as well as on the working long baseline optical interferometers (LBI) situated at the various observatories across the globe that are producing a large amount of astronomical results. Since the future of high resolution astronomy lies with the new generation of arrays, the numerous technical challenges of developing such systems are addressed indicating the current trends and the path to future progress in interferometry. The new generation interferometers such as Palomar testbed interferometer (PTI), Navy prototype optical interferometer (NPOI), Keck interferometer, Very large telescope interferometer (VLTI), Center for high angular resolution astronomy (CHARA) array, Optical very large array (OVLA), Mitaka optical infrared arrays (MIRA), etc., are being developed. A few of them, viz., PTI, NPOI, IOTA are producing results. Among the working interferometers that have been described earlier by Saha (1999a), the expansion of the Grand interf\'erom\`etre \`a deux (two) t\'elescopes (GI2T), Infrared and optical telescope array (IOTA) are in progress. The current status of all these interferometers stated above are enumerated. The data analysis being carried out using the working interferometers are also described. The space interferometry programmes are advancing very fast. Among the notable ones are the Space technology 3 (ST3), Space interferometry mission (SIM), and Darwin; they have already received funds. The technical details of these interferometers and their objectives are highlighted.

The speckle imaging is a photographic technique that resolves objects viewed through severely distorted media. The results are insensitive to the errors caused by apparent size of the isoplanatic patch and the telescope aberrations. In this article, a short descriptions of the atmospheric turbulence and its effect on the flat wavefront from a stellar source is presented; the shortcomings of the conventional long-exposure images in the presence of Earth's atmosphere are discussed. The advantages of the speckle interferometric technique over conventional imaging are enumerated. The technical details of the method, basic Fourier optics, data analysis procedures are also described.

An interferometer system for use at the 2.34 meter Vainu Bappu Telescope (VBT), situated at Vainu Bappu Observatory (VBO), Kavalur, to obtain speckle-grams of astronomical objects in the visible wavelength, has been developed. Laboratory tests of resultant intensity distributions due to a point source, with phase modulation screens, as well as the images obtained using this interferometer at the cassegrain end of the said telescope are discussed.

We have presented the basic mathematical treatment of interferometry in the optical domain. Its applications in astronomical observations using both the single aperture, as well as the diluted apertures are described in detail. We have also described about the shortcomings of this technique in the presence of Earth's atmosphere. A short descriptions of the atmospheric turbulence and its effect on the flat wavefront from a stellar source is given. The formation of speckle which acts as carrier of information is defined. Laboratory experiments with phase modulation screens, as well as the resultant intensity distributions due to point source are demonstrated. The experimental method to freeze the speckles, as well as data processing techniques for both Fourier modulus and Fourier phase are described. We have also discussed the technique of the aperture synthesis using non-redundant aperture masks at the pupil plane of the telescope, emphasizing set on the comparison with speckle interferometry. The various methods of image restoration and their comparisons are also discussed. Finally, we have touched upon certain astrophysical problems which can be tackled with the newly developed speckle interferometer using the 2.34 meter Vainu Bappu Telescope (VBT), situated at the Vainu Bappu Observatory (VBO), Kavalur, India.

Speckle interferometric technique has been used to obtain a series of short exposure images of the collision of comet Shoemaker-Levy 9 with Jupiter during the period of July 17-24, 1994 using the Nasmyth focus of 1.2 meter telescope of Japal-Rangapur Observatory, Hyderabad. The technique of Blind Iterative Deconvolution (BID) was used to remove the atmospherically induced point spread function (PSF) from these images to obtain diffraction limited informations of the impact sites on Jupiter.

The technique of Blind Iterative De-convolution (BID) was used to remove the atmospherically induced point spread function (PSF) from short exposure images of two binary stars, HR 5138 and HR 5747 obtained at the cassegrain focus of the 2.34 meter Vainu Bappu Telescope(VBT), situated at Vainu Bappu Observatory (VBO), Kavalur. The position angles and separations of the binary components were seen to be consistent with results of the auto-correlation technique, while the Fourier phases of the reconstructed images were consistent with published observations of the binary orbits.

An experiment for the speckle reconstruction of solar features was developed for observing the partial eclipse of the sun as viewed from Bangalore on October 24, 1995. No data could be obtained because of cloudy sky but the experimental details are described.

The night time variation of the Fried's parameter, r$_{o}$ is measured on 28-29 March 1991, at the Cassegrain focus of 2.34 m Vainu Bappu Telescope (VBT), at Vainu Bappu Observatory (VBO), Kavalur, India, using speckle interferometer; the results are discussed.

A new optical speckle interferometer for use at the 2.34 meter Vainu Bappu Telescope (VBT), at Vainu Bappu Observatory (VBO), Kavalur, India, has been designed and developed. Provisions have been made for observation both at the prime focus (f/3.25), as well as at the Cassegrain focus (f/13) of the said telescope. The technical details of this sensitive instrument and the design features are described. An interface between the telescope and the afore-mentioned interferometer is made based on a concept of eliminating the formation of eddies due to the hot air entrapment. The performances of this instrument has been tested both at the laboratory, as well as at the Cassegrain end of the telescope. It is being used routinely to observe the speckle-grams of close-binary (separation $<$1 arc second) stars. The size of the Fried's parameter, r$_{o}$, is also measured.

The current status of the high spatial resolution imaging interferometry in optical astronomy is reviewed in the light of theoretical explanation, as well as of experimental constraints that exist in the present day technology. The basic mathematical interlude pertinent to the interferometric technique and its applications in astronomical observations are presented in detail. An elaborate account of the random refractive index fluctuations of the atmosphere producing random aberrations in the telescope pupil, elucidating the trade offs between long-exposure and short-exposure imaging is given. Further, the other methods viz., (i) speckle spectroscopy, (ii) speckle polarimetry, (iii) phase closure, (iv) aperture synthesis, (v) pupil plane interferometry, (vi) differential speckle interferometry etc., using single moderate or large telescopes are described as well. The salient features of various detectors that are used for recording short-exposure images are summarized. The mathematical intricacies of the data processing techniques for both Fourier modulus and Fourier phase are analyzed; the various schemes of image restoration techniques are examined as well with emphasis set on their comparisons. The recent technological innovation to compensate the deleterious effects of the atmosphere on the telescope image in real-time is enumerated. The experimental descriptions of several working long baseline interferometers in the visible band are summarized. The astrophysical results obtained till date are highlighted.