OSIRIS is a near-infrared (1.0--2.4 $\mu$m) integral field spectrograph operating behind the adaptive optics system at Keck Observatory, and is one of the first lenslet-based integral field spectrographs. Since its commissioning in 2005, it has been a productive instrument, producing nearly half the laser guide star adaptive optics (LGS AO) papers on Keck. The complexity of its raw data format necessitated a custom data reduction pipeline (DRP) delivered with the instrument in order to iteratively assign flux in overlapping spectra to the proper spatial and spectral locations in a data cube. Other than bug fixes and updates required for hardware upgrades, the bulk of the DRP has not been updated since initial instrument commissioning. We report on the first major comprehensive characterization of the DRP using on-sky and calibration data. We also detail improvements to the DRP including characterization of the flux assignment algorithm; exploration of spatial rippling in the reduced data cubes; and improvements to several calibration files, including the rectification matrix, the bad pixel mask, and the wavelength solution. We present lessons learned from over a decade of OSIRIS data reduction that are relevant to the next generation of integral field spectrograph hardware and data reduction software design.

In this contribution we review the recent progress in the modeling of Pulsar Wind Nebulae (PWN). We start with a brief overview of the relevant physical processes in the magnetosphere, the wind-zone and the inflated nebula bubble. Radiative signatures and particle transport processes obtained from 3D simulations of PWN are discussed in the context of optical and X-ray observations. We then proceed to consider particle acceleration in PWN and elaborate on what can be learned about the particle acceleration from the dynamical structures called "wisps" observed in the Crab nebula. We also discuss recent observational and theoretical results of gamma-ray flares and the inner knot of the Crab nebula, which had been proposed as the emission site of the flares. We extend the discussion to GeV flares from binary systems in which the pulsar wind interacts with the stellar wind from a companion star. The chapter concludes with a discussion of solved and unsolved problems posed by PWN.

Directly detecting thermal emission from young extrasolar planets allows measurement of their atmospheric composition and luminosity, which is influenced by their formation mechanism. Using the Gemini Planet Imager, we discovered a planet orbiting the \$sim$20 Myr-old star 51 Eridani at a projected separation of 13 astronomical units. Near-infrared observations show a spectrum with strong methane and water vapor absorption. Modeling of the spectra and photometry yields a luminosity of L/LS=1.6-4.0 x 10-6 and an effective temperature of 600-750 K. For this age and luminosity, "hot-start" formation models indicate a mass twice that of Jupiter. This planet also has a sufficiently low luminosity to be consistent with the "cold- start" core accretion process that may have formed Jupiter.

One of the most intriguing results from the gamma-ray instruments in orbit has been the detection of powerful flares from the Crab Nebula. These flares challenge our understanding of pulsar wind nebulae and models for particle acceleration. We report on the portion of a multiwavelength campaign using Keck, HST, and Chandra concentrating on a small emitting region, the Crab's inner knot, located a fraction of an arcsecond from the pulsar. We find that the knot's radial size, tangential size, peak flux, and the ratio of the flux to that of the pulsar are correlated with the projected distance of the knot from the pulsar. A new approach, using singular value decomposition for analyzing time series of images, was introduced yielding results consistent with the more traditional methods while some uncertainties were substantially reduced. We exploit the characterization of the knot to discuss constraints on standard shock-model parameters that may be inferred from our observations assuming the inner knot lies near to the shocked surface. These include inferences as to wind magnetization, shock shape parameters such as incident angle and poloidal radius of curvature, as well as the IR/optical emitting particle enthalpy fraction. We find that while the standard shock model gives good agreement with observation in many respects, there remain two puzzles: (a) The observed angular size of the knot relative to the pulsar--knot separation is much smaller than expected; (b) The variable, yet high degree of polarization reported is difficult to reconcile with a highly relativistic downstream flow.

We present the laboratory verification of a method for re- moving the effects of frozen-flow atmospheric turbulence using a Linear Quadratic Gaussian (LQG) controller, also known as a Kalman Filter. This method, which we term "Predictive Fourier Control," can identify correlated atmospheric motions due to layers of frozen flow turbulence, and can predictively remove the effects of these correlated motions in real-time. Our laboratory verification suggests a factor of 3 improvement in the RMS residual wavefront error and a 10% improvement in measured Strehl of the system. We found that the RMS residual wavefront error was suppressed from 35.0 nm to 11.2 nm due to the use of Predictive Fourier Control, and that the far field Strehl improved from 0.479 to 0.520.

We describe KAPAO, our project to develop and deploy a low-cost, remote-access, natural guide star adaptive optics (AO) system for the Pomona College Table Mountain Observatory (TMO) 1-meter telescope. We use a commercially available 140-actuator BMC MEMS deformable mirror and a version of the Robo-AO control software developed by Caltech and IUCAA. We have structured our development around the rapid building and testing of a prototype system, KAPAO-Alpha, while simultaneously designing our more capable final system, KAPAO-Prime. The main differences between these systems are the prototype's reliance on off-the-shelf optics and a single visible-light science camera versus the final design's improved throughput and capabilities due to the use of custom optics and dual-band, visible and near-infrared imaging. In this paper, we present the instrument design and on-sky closed-loop testing of KAPAO-Alpha as well as our plans for KAPAO-Prime. The primarily undergraduate-education nature of our partner institutions, both public (Sonoma State University) and private (Pomona and Harvey Mudd Colleges), has enabled us to engage physics, astronomy, and engineering undergraduates in all phases of this project. This material is based upon work supported by the National Science Foundation under Grant No. 0960343.

Robo-AO is the first astronomical laser guide star adaptive optics (AO) system designed to operate completely independent of human supervision. A single computer commands the AO system, the laser guide star, visible and near-infrared science cameras (which double as tip-tip sensors), the telescope, and other instrument functions. Autonomous startup and shutdown sequences as well as concatenated visible observations were demonstrated in late 2011. The fully robotic software is currently operating during a month long demonstration of Robo-AO at the Palomar Observatory 60-inch telescope.

The Palomar Transient Factory (PTF) is a project aimed to discover transients in the Universe, including Type Ia supernovae, core-collapse supernovae, and other exotic and rare transient events. PTF utilizes the Palomar 48-inch Telescope (P48) for discovering the transients, and follow-up mainly by the Palomar 60-inch Telescope (P60, for photometric light and color curves), as well as other telescopes. The discovery rate of PTF is about 7000 candidate transients per year, but currently only about 10% of the candidates are being followed-up and classified. To overcome this shortcoming, a dedicated spectrograph, called the SED Machine, is being designed and built at the California Institute of Technology for the P60 Telescope, aiming to maximize the classification efficiency of transients discovered by PTF. The SED Machine is a low resolution (R ~ 100) IFU spectrograph. It consists of a rainbow camera for spectrophotometric calibration, and a lenslet array plus 3-prism optics system for integrated field spectra. An overview of the science and design of the SED Machine is presented here.

We present ground-based optical observations of the September 2009 and January 2010 transits of HD 80606b. Based on 3 partial light curves of the September 2009 event, we derive a midtransit time of T_c [HJD] = 2455099.196 +- 0.026, which is about 1 sigma away from the previously predicted time. We observed the January 2010 event from 9 different locations, with most phases of the transit being observed by at least 3 different teams. We determine a midtransit time of T_c [HJD] = 2455210.6502 +- 0.0064, which is within 1.3 sigma of the time derived from a Spitzer observation of the same event.