Normalized to: Rubie, D.
[1]
oai:arXiv.org:2004.04269 [pdf] - 2077338
Scaling laws for the geometry of an impact-induced magma ocean
Submitted: 2020-04-08
Growing protoplanets experience a number of impacts during the accretion
stage. A large impactor hits the surface of a protoplanet and produces a magma
ocean, where the impactor's iron emulsifies and experiences metal-silicate
equilibration with the mantle of the protoplanet while it descends towards the
base of the magma ocean. This process repeatedly occurs and determines the
chemical compositions of both mantle and core. The partitioning is controlled
by parameters such as the equilibration pressure and temperature, which are
often associated with or assumed to be proportional to the pressure and
temperature at the base of the magma ocean. The pressure and temperature depend
on both the depth and shape of a magma ocean because a spatially confined magma
ocean, namely, a melt pool, can have a larger equilibrium pressure than a
radially uniform (global) magma ocean even if their melt volumes are the same.
Here, we develop scaling laws for (1) the total internal energy gain due to an
impact, and (2) the heat distribution within the mantle based on more than 100
smoothed particle hydrodynamic (SPH) simulations. We use Legendre polynomials
to describe these scaling laws and determine their coefficients by linear
regression, minimizing the error between our model and SPH simulations. The
input parameters are the impact angle, total mass, impact velocity, and
impactor-to-total mass ratio. We find that the internal energy gain by a large
impact is well characterized by the summation of the kinetic energy and
accretional potential energy release as a function of the impact angle. We
determine that the equilibrium pressure at the base of a melt pool can be
higher (by $10-50 \%$) than those obtained from conventional radially-uniform
global magma ocean models. These melt scaling laws are publicly available on
GitHub (https://github.com/mikinakajima/MeltScalingLaw).
[2]
oai:arXiv.org:2003.05486 [pdf] - 2077050
Subsolar Al/Si and Mg/Si ratios of non-carbonaceous chondrites reveal
planetesimal formation during early condensation in the protoplanetary disk
Submitted: 2020-03-11
The Al/Si and Mg/Si ratios in non-carbonaceous chondrites are lower than the
solar (i.e., CI-chondritic) values, in sharp contrast to the non-CI
carbonaceous meteorites and the Earth, which are enriched in refractory
elements and have Mg/Si ratios that are solar or larger. We show that the
formation of a first generation of planetesimals during the condensation of
refractory elements implies the subsequent formation of residual condensates
with strongly sub-solar Al/Si and Mg/Si ratios. The mixing of residual
condensates with different amounts of material with solar refractory/Si element
ratios explains the Al/Si and Mg/Si values of non-carbonaceous chondrites. To
match quantitatively the observed ratios, we find that the first-planetesimals
should have accreted when the disk temperature was ~1,330-1,400 K depending on
pressure and assuming a solar C/O ratio of the disk. We discuss how this model
relates to our current understanding of disk evolution, grain dynamics, and
planetesimal formation. We also extend the discussion to moderately volatile
elements (e.g., Na), explaining how it may be possible that the depletion of
these elements in non-carbonaceous chondrites is correlated with the depletion
of refractory elements (e.g., Al). Extending the analysis to Cr, we find
evidence for a higher than solar C/O ratio in the protosolar disk's gas
when/where condensation from a fractionated gas occurred. Finally, we discuss
the possibility that the supra-solar Al/Si and Mg/Si ratios of the Earth are
due to the accretion of ~40% of the mass of our planet from the
first-generation of refractory-rich planetesimals.
[3]
oai:arXiv.org:1801.05456 [pdf] - 1633286
The Delivery of Water During Terrestrial Planet Formation
Submitted: 2018-01-16, last modified: 2018-02-09
The planetary building blocks that formed in the terrestrial planet region
were likely very dry, yet water is comparatively abundant on Earth. We review
the various mechanisms proposed for the origin of water on the terrestrial
planets. Various in-situ mechanisms have been suggested, which allow for the
incorporation of water into the local planetesimals in the terrestrial planet
region or into the planets themselves from local sources, although all of those
mechanisms have difficulties. Comets have also been proposed as a source,
although there may be problems fitting isotopic constraints, and the delivery
efficiency is very low, such that it may be difficult to deliver even a single
Earth ocean of water this way. The most promising route for water delivery is
the accretion of material from beyond the snow line, similar to carbonaceous
chondrites, that is scattered into the terrestrial planet region as the planets
are growing. Two main scenarios are discussed in detail. First is the classical
scenario in which the giant planets begin roughly in their final locations and
the disk of planetesimals and embryos in the terrestrial planet region extends
all the way into the outer asteroid belt region. Second is the Grand Tack
scenario, where early inward and outward migration of the giant planets
implants material from beyond the snow line into the asteroid belt and
terrestrial planet region, where it can be accreted by the growing planets.
Sufficient water is delivered to the terrestrial planets in both scenarios.
While the Grand Tack scenario provides a better fit to most constraints, namely
the small mass of Mars, planets may form too fast in the nominal case discussed
here. This discrepancy may be reduced as a wider range of initial conditions is
explored. Finally, we discuss several more recent models that may have
important implications for water delivery to the terrestrial planets.
[4]
oai:arXiv.org:1801.03756 [pdf] - 1616679
The timeline of the Lunar bombardment - revisited
Submitted: 2018-01-11
The timeline of the lunar bombardment in the first Gy of the Solar System
remains unclear. Some basin-forming impacts occurred 3.9-3.7Gy ago. Many other
basins formed before, but their exact ages are not precisely known. There are
two possible interpretations of the data: in the cataclysm scenario there was a
surge in the impact rate approximately 3.9Gy ago, while in the accretion tail
scenario the lunar bombardment declined since the era of planet formation and
the latest basins formed in its tail-end. Here, we revisit the work of
Morbidelli et al.(2012) that examined which scenario could be compatible with
both the lunar crater record in the 3-4Gy period and the abundance of highly
siderophile elements (HSE) in the lunar mantle. We use updated numerical
simulations of the fluxes of impactors. Under the traditional assumption that
the HSEs track the total amount of material accreted by the Moon since its
formation, we conclude that only the cataclysm scenario can explain the data.
The cataclysm should have started ~3.95Gy ago. However we show that HSEs could
have been sequestered from the lunar mantle due to iron sulfide exsolution
during magma ocean crystallization, followed by mantle overturn. Based on the
hypothesis that the lunar magma ocean crystallized about 100-150My after Moon
formation, and therefore that HSEs accumulated in the lunar mantle only after
this time, we show that the bombardment in the 3-4Gy period can be explained in
the accretion tail scenario. This hypothesis would also explain why the Moon
appears so depleted in HSEs relative to the Earth. We also extend our analysis
of the cataclysm and accretion tail scenarios to the case of Mars. The
accretion tail scenario requires a global resurfacing event on Mars ~4.4Gy ago,
possibly associated with the formation of the Borealis basin, and it is
consistent with the HSE budget of the planet.
[5]
oai:arXiv.org:1712.07539 [pdf] - 1637616
Water and the interior structure of terrestrial planets and icy bodies
Submitted: 2017-12-20
Water content and the internal evolution of terrestrial planets and icy
bodies are closely linked. The distribution of water in planetary systems is
controlled by the temperature structure in the protoplanetary disk and dynamics
and migration of planetesimals and planetary embryos. This results in the
formation of planetesimals and planetary embryos with a great variety of
compositions, water contents and degrees of oxidation. The internal evolution
and especially the formation time of planetesimals relative to the timescale of
radiogenic heating by short-lived 26Al decay may govern the amount of hydrous
silicates and leftover rock-ice mixtures available in the late stages of their
evolution. In turn, water content may affect the early internal evolution of
the planetesimals and in particular metal-silicate separation processes.
Moreover, water content may contribute to an increase of oxygen fugacity and
thus affect the concentrations of siderophile elements within the silicate
reservoirs of Solar System objects. Finally, the water content strongly
influences the differentiation rate of the icy moons, controls their internal
evolution and governs the alteration processes occurring in their deep
interiors.
[6]
oai:arXiv.org:1710.01770 [pdf] - 1589305
Formation, stratification, and mixing of the cores of Earth and Venus
Submitted: 2017-10-04
Earth possesses a persistent, internally-generated magnetic field, whereas no
trace of a dynamo has been detected on Venus, at present or in the past,
although a high surface temperature and recent resurfacing events may have
removed paleomagnetic evidence. Whether or not a terrestrial body can sustain
an internally generated magnetic field by convection inside its metallic fluid
core is determined in part by its initial thermodynamic state and its
compositional structure, both of which are in turn set by the processes of
accretion and differentiation. Here we show that the cores of Earth- and
Venus-like planets should grow with stable compositional stratification unless
disturbed by late energetic impacts. They do so because higher abundances of
light elements are incorporated into the liquid metal that sinks to form the
core as the temperatures and pressures of metal-silicate equilibration increase
during accretion. We model this process and determine that this establishes a
stable stratification that resists convection and inhibits the onset of a
geodynamo. However, if a late energetic impact occurs, it could mechanically
stir the core creating a single homogenous region within which a long-lasting
geodynamo would operate. While Earth's accretion has been punctuated by a late
giant impact with likely enough energy to mix the core (e.g. the impact that
formed the Moon), we hypothesize that the accretion of Venus is characterized
by the absence of such energetic giant impacts and the preservation of its
primordial stratifications.
[7]
oai:arXiv.org:1609.04751 [pdf] - 1481160
Highly siderophile elements were stripped from Earth's mantle by iron
sulfide segregation
Submitted: 2016-09-15
Highly siderophile elements (HSEs) are strongly depleted in the bulk silicate
Earth (BSE) but are present in near-chondritic relative abundances. The
conventional explanation is that the HSEs were stripped from the mantle by the
segregation of metal during core formation but were added back in
near-chondritic proportions by late accretion, after core formation had ceased.
Here we show that metal-silicate equilibration and segregation during Earth's
core formation actually increased HSE mantle concentrations because HSE
partition coefficients are relatively low at the high pressures of core
formation within Earth. The pervasive exsolution and segregation of iron
sulfide liquid from silicate liquid (the "Hadean matte") stripped magma oceans
of HSEs during cooling and crystallization, before late accretion, and resulted
in slightly suprachondritic palladium/iridium and ruthenium/iridium ratios.
[8]
oai:arXiv.org:1603.08682 [pdf] - 1382217
Impact-induced melting during accretion of the Earth
Submitted: 2016-03-29
Because of the high energies involved, giant impacts that occur during
planetary accretion cause large degrees of melting. The depth of melting in the
target body after each collision determines the pressure and temperature
conditions of metal-silicate equilibration and thus geochemical fractionation
that results from core-mantle differentiation. The accretional collisions
involved in forming the terrestrial planets of the inner Solar System have been
calculated by previous studies using N-body accretion simulations. Here we use
the output from such simulations to determine the volumes of melt produced and
thus the pressure and temperature conditions of metal-silicate equilibration,
after each impact, as Earth-like planets accrete. For these calculations a
parametrised melting model is used that takes impact velocity, impact angle and
the respective masses of the impacting bodies into account. The evolution of
metal-silicate equilibration pressures (as defined by evolving magma ocean
depths) during Earth's accretion depends strongly on the lifetime of
impact-generated magma oceans compared to the time interval between large
impacts. In addition, such results depend on starting parameters in the N-body
simulations, such as the number and initial mass of embryos. Thus, there is the
potential for combining the results, such as those presented here, with
multistage core formation models to better constrain the accretional history of
the Earth.
[9]
oai:arXiv.org:1603.04536 [pdf] - 1374434
Oxygen isotopic evidence for vigorous mixing during the Moon-forming
Giant Impact
Submitted: 2016-03-14
Earth and Moon are shown here to be composed of oxygen isotope reservoirs
that are indistinguishable, with a difference in {\Delta}"17O of -1 +/- 5ppm
(2se). Based on these data and our new planet formation simulations that
include a realistic model for oxygen isotopic reservoirs, our results favor
vigorous mixing during the giant impact and therefore a high-energy high-
angular-momentum impact. The results indicate that the late veneer impactors
had an average {\Delta}"17O within approximately 1 per mil of the terrestrial
value, suggesting that these impactors were water rich.
[10]
oai:arXiv.org:1504.05417 [pdf] - 1530253
Mechanisms and Geochemical Models of Core Formation
Submitted: 2015-04-21
The formation of the Earth's core is a consequence of planetary accretion and
processes in the Earth's interior. The mechanical process of planetary
differentiation is likely to occur in large, if not global, magma oceans
created by the collisions of planetary embryos. Metal-silicate segregation in
magma oceans occurs rapidly and efficiently unlike grain scale percolation
according to laboratory experiments and calculations. Geochemical models of the
core formation process as planetary accretion proceeds are becoming
increasingly realistic. Single stage and continuous core formation models have
evolved into multi-stage models that are couple to the output of dynamical
models of the giant impact phase of planet formation. The models that are most
successful in matching the chemical composition of the Earth's mantle, based on
experimentally-derived element partition coefficients, show that the
temperature and pressure of metal-silicate equilibration must increase as a
function of time and mass accreted and so must the oxygen fugacity of the
equilibrating material. The latter can occur if silicon partitions into the
core and through the late delivery of oxidized material. Coupled dynamical
accretion and multi-stage core formation models predict the evolving mantle and
core compositions of all the terrestrial planets simultaneously and also place
strong constraints on the bulk compositions and oxidation states of primitive
bodies in the protoplanetary disk.
[11]
oai:arXiv.org:1504.01421 [pdf] - 975692
Highly Siderophile Elements in the Earth's Mantle as a Clock for the
Moon-forming Impact
Submitted: 2015-04-06
According to the generally accepted scenario, the last giant impact on the
Earth formed the Moon and initiated the final phase of core formation by
melting the Earth's mantle. A key goal of geochemistry is to date this event,
but different ages have been proposed. Some argue for an early Moon-forming
event, approximately 30 million years (Myr) after the condensation of the first
solids in the Solar System, whereas others claim a date later than 50 Myr (and
possibly as late as around 100 My) after condensation. Here we show that a
Moon-forming event at 40 Myr after condensation, or earlier, is ruled out at a
99.9 per cent confidence level. We use a large number of N-body simulations to
demonstrate a relationship between the time of the last giant impact on an
Earth-like planet and the amount of mass subsequently added during the era
known as Late Accretion. As the last giant impact is delayed, the late-accreted
mass decreases in a predictable fashion. This relationship exists within both
the classical scenario and the Grand Tack scenario of terrestrial planet
formation, and it holds across a wide range of disk conditions. The
concentration of highly siderophile elements (HSEs) in Earth's mantle
constrains the mass of chondritic material added to Earth during Late
Accretion. Using HSE abundance measurements, we determine a Moon-formation age
of 95 +/- 32 Myr since condensation. The possibility exists that some late
projectiles were differentiated and left an incomplete HSE record in Earth's
mantle. Even in this case, various isotopic constraints strongly suggest that
the late-accreted mass did not exceed 1 per cent of Earth's mass, and so the
HSE clock still robustly limits the timing of the Moon-forming event to
significantly later than 40 My after condensation.
[12]
oai:arXiv.org:1410.3509 [pdf] - 1316959
Accretion and differentiation of the terrestrial planets with
implications for the compositions of early-formed Solar System bodies and
accretion of water
Submitted: 2014-10-13
In order to test planetary accretion and differentiation scenarios, we
integrated a multistage core-mantle differentiation model with N-body accretion
simulations. Impacts between embryos and planetesimals result in magma ocean
formation and episodes of core formation. The core formation model combines
rigorous chemical mass balance with metal-silicate element partitioning data.
The primary constraint on the combined model is the composition of the Earth's
primitive mantle, the composition of the Martian mantle, and the mass fractions
of the metallic cores of Earth and Mars. The model is refined by least squares
minimization with up to five fitting parameters that consist of the
metal-silicate equilibrium pressure and 1-4 parameters that define the starting
compositions of primitive bodies. This integrated model has been applied to 6
Grand Tack simulations. Investigations of a broad parameter space indicate
that: accretion of Earth was heterogeneous, metal-silicate equilibration
pressures increase as accretion progresses and are 60-70% of core-mantle
boundary pressures at the time of each impact, and a large fraction (70-100%)
of the metal of impactor cores equilibrates with a small fraction of the
silicate mantles of protoplanets during each core formation event. Acceptable
fits to the Earth's mantle composition are obtained only when bodies that
originated close to the Sun, at <0.9-1.2 AU, are highly reduced and those
beyond this distance are increasingly oxidized. The FeO content of the Martian
mantle depends critically on the heliocentric distance at which the
Mars-forming embryo originated. Finally, the Earth's core is predicted to
contain 8-9 wt% silicon, 2-4 wt% oxygen and 10-60 ppm hydrogen, whereas the
Martian core is predicted to contain low concentrations (<1 wt%) of Si and O.