During the formation and evolution of the Solar System, significant numbers of cometary and asteroidal bodies were ejected into interstellar space$^{1,2}$. It can be reasonably expected that the same happened for planetary systems other than our own. Detection of such Inter- stellar Objects (ISOs) would allow us to probe the planetesimal formation processes around other stars, possibly together with the effects of long-term exposure to the interstellar medium. 1I/2017 U1 'Oumuamua is the first known ISO, discovered by the Pan-STARRS1 telescope in October 2017$^3$.The discovery epoch photometry implies a highly elongated body with radii of $\sim 200 \times 20$ m when a comet-like geometric albedo of 0.04 is assumed. Here we report spectroscopic characterisation of 'Oumuamua, finding it to be variable with time but similar to organically rich surfaces found in the outer Solar System. The observable ISO population is expected to be dominated by comet-like bodies in agreement with our spectra, yet the reported inactivity implies a lack of surface ice. We show this is consistent with predictions of an insulating mantle produced by long-term cosmic ray exposure. An internal icy composition cannot therefore be ruled out by the lack of activity, even though 'Oumuamua passed within 0.25 au of the Sun.

In planetary science, surface roughness is regarded to be a measure of surface irregularity at small spatial scales, and causes the thermal-infrared beaming effect (i.e. re-radiation of absorbed sunlight back towards to the Sun). Typically, surface roughness exhibits a degeneracy with thermal inertia when thermophysical models are fitted to disc-integrated thermal-infrared observations of asteroids because of this effect. In this work, it is demonstrated how surface roughness can be constrained for near-Earth asteroid (433) Eros (i.e. the target of NASA's NEAR Shoemaker mission) when using the Advanced Thermophysical Model with thermal-infrared observations taken during an "almost pole-on" illumination and viewing geometry. It is found that the surface roughness of (433) Eros is characterised by an RMS slope of 38 $\pm$ 8{\deg} at the 0.5-cm spatial scale associated with its thermal-infrared beaming effect. This is slightly greater than the RMS slope of 25 $\pm$ 5{\deg} implied by the NEAR Shoemaker laser ranging results when extrapolated to this spatial scale, and indicates that other surface shaping processes might operate, in addition to collisions and gravity, at spatial scales under one metre in order to make asteroid surfaces rougher. For other high obliquity asteroids observed during "pole-on" illumination conditions, the thermal-infrared beaming effect allows surface roughness to be constrained when the sub-solar latitude is greater than 60{\deg}, and if the asteroids are observed at phase angles of less than 40{\deg}. They will likely exhibit NEATM beaming parameters that are lower than expected for a typical asteroid at all phase angles up to 100{\deg}.

We present THERMAP, a mid-infrared (8-16 {\mu}m) spectro-imager for space missions to small bodies in the inner solar system, developed in the framework of the MarcoPolo-R asteroid sample return mission. THERMAP is very well suited to characterize the surface thermal environment of a NEO and to map its surface composition. The instrument has two channels, one for imaging and one for spectroscopy: it is both a thermal camera with full 2D imaging capabilities and a slit spectrometer. THERMAP takes advantage of the recent technological developments of uncooled microbolometers detectors, sensitive in the mid-infrared spectral range. THERMAP can acquire thermal images (8-18 {\mu}m) of the surface and perform absolute temperature measurements with a precision better than 3.5 K above 200 K. THERMAP can acquire mid-infrared spectra (8-16 {\mu}m) of the surface with a spectral resolution {\Delta}{\lambda} of 0.3 {\mu}m. For surface temperatures above 350 K, spectra have a signal-to-noise ratio >60 in the spectral range 9-13 {\mu}m where most emission features occur.

The field of asteroid thermophysical modeling has experienced an extraordinary growth in the last ten years, as new thermal infrared data became available for hundreds of thousands of asteroids. The infrared emission of asteroids depends on the body's size, shape, albedo, thermal inertia, roughness and rotational properties. These parameters can therefore be derived by thermophysical modeling of infrared data. Thermophysical modeling led to asteroid size estimates that were confirmed at the few-percent level by later spacecraft visits. We discuss how instrumentation advances now allow mid-infrared interferometric observations as well as high-accuracy spectro-photometry, posing their own set of thermal-modeling challenges.We present major breakthroughs achieved in studies of the thermal inertia, a sensitive indicator for the nature of asteroids soils, allowing us, for instance, to determine the grain size of asteroidal regoliths. Thermal inertia also governs non-gravitational effects on asteroid orbits, requiring thermophysical modeling for precise asteroid dynamical studies. The radiative heating of asteroids, meteoroids, and comets from the Sun also governs the thermal stress in surface material; only recently has it been recognized as a significant weathering process. Asteroid space missions with thermal infrared instruments are currently undergoing study at all major space agencies. This will require a high level of sophistication of thermophysical models in order to analyze high-quality spacecraft data.

The Yarkovsky (orbital drift) and YORP (spin state change) effects play important roles in the dynamical and physical evolution of asteroids. Thermophysical modelling of these observed effects, and of thermal-infrared observations, allows a detailed physical characterisation of an individual asteroid to be performed. We perform a detailed physical characterisation of near-Earth asteroid (1620) Geographos, a potential meteor stream source and former spacecraft target, using the same techniques as previously used in Rozitis et al. (2013) for (1862) Apollo. We use the advanced thermophysical model (ATPM) on published light-curve, radar, and thermal-infrared observations to constrain the thermophysical properties of Geographos. The derived properties are used to make detailed predictions of the Yarkovsky orbital drift and YORP rotational acceleration, which are then compared against published measurements to determine Geographos's bulk density. We find that Geographos has a thermal inertia of 340 +140/-100 J m-2 K-1 s-1/2, a roughness fraction of >50%, and a bulk density of 2100 +550/-450 kg m-3 when using the light-curve-derived shape model with the radar-derived maximum equatorial diameter of 5.04 +/- 0.07 km. It is also found that the radar observations had overestimated the z-axis in Geographos's shape model because of their near-equatorial view. This results in a poor fit to the thermal-infrared observations if its effective diameter is kept fixed in the model fitting. The thermal inertia derived for Geographos is slightly higher than the typical values for a near-Earth asteroid of its size, and its derived bulk density suggests a rubble-pile interior structure. Large uncertainties in shape model z-axes are likely to explain why radar and thermal-infrared observations sometimes give inconsistent diameter determinations for other asteroids.

The target asteroid of the OSIRIS-REx asteroid sample return mission, (101955) Bennu (formerly 1999 RQ$_{36}$), is a half-kilometer near-Earth asteroid with an extraordinarily well constrained orbit. An extensive data set of optical astrometry from 1999--2013 and high-quality radar delay measurements to Bennu in 1999, 2005, and 2011 reveal the action of the Yarkovsky effect, with a mean semimajor axis drift rate $da/dt = (-19.0 \pm 0.1)\times 10^{-4}$ au/Myr or $284\pm 1.5\;\rm{m/yr}$. The accuracy of this result depends critically on the fidelity of the observational and dynamical model. As an example, neglecting the relativistic perturbations of the Earth during close approaches affects the orbit with $3\sigma$ significance in $da/dt$. The orbital deviations from purely gravitational dynamics allow us to deduce the acceleration of the Yarkovsky effect, while the known physical characterization of Bennu allows us to independently model the force due to thermal emissions. The combination of these two analyses yields a bulk density of $\rho = 1260\pm70\,\rm{kg/m^3}$, which indicates a macroporosity in the range $40\pm10$% for the bulk densities of likely analog meteorites, suggesting a rubble-pile internal structure. The associated mass estimate is $(7.8\pm0.9)\times 10^{10}\, \rm{kg}$ and $GM = 5.2\pm0.6\,\rm{m^3/s^2}$. Bennu's Earth close approaches are deterministic over the interval 1654--2135, beyond which the predictions are statistical in nature. In particular, the 2135 close approach is likely within the lunar distance and leads to strong scattering and therefore numerous potential impacts in subsequent years, from 2175--2196. The highest individual impact probability is $9.5\times 10^{-5}$ in 2196, and the cumulative impact probability is $3.7\times 10^{-4}$, leading to a cumulative Palermo Scale of -1.70.

Despite their very low surface gravities, the surfaces of asteroids and comets are covered by granular materials - regolith - that can range from a fine dust to a gravel-like structure of varying depths. Understanding the dynamics of granular materials is, therefore, vital for the interpretation of the surface geology of these small bodies and is also critical for the design and/or operations of any device planned to interact with their surfaces. We present the first measurements of transient weakening of granular material after shear reversal in microgravity as well as a summary of experimental results recently published in other journals, which may have important implications for small-body surfaces. Our results suggest that the force contact network within a granular material may be weaker in microgravity, although the influence of any change in the contact network is felt by the granular material over much larger distances. This could mean that small body surfaces are even more unstable than previously imagined. However, our results also indicate that the consequences of, e.g., a meteorite impact or a spacecraft landing, may be very different depending on the impact angle and location, and depending on the prior history of the small body surface.

We investigate the role of gravity on convection in a dense granular shear flow. Using a microgravity modified Taylor-Couette shear cell under the conditions of parabolic flight microgravity, we demonstrate experimentally that secondary, convective-like flows in a sheared granular material are close to zero in microgravity and enhanced under high-gravity conditions, though the primary flow fields are unaffected by gravity. We suggest that gravity tunes the frictional particle-particle and particle-wall interactions, which have been proposed to drive the secondary flow. In addition, the degree of plastic deformation increases with increasing gravitational forces, supporting the notion that friction is the ultimate cause.

Despite their very low surface gravities, asteroids exhibit a number of different geological processes involving granular matter. Understanding the response of this granular material subject to external forces in microgravity conditions is vital to the design of a successful asteroid sub-surface sampling mechanism, and in the interpretation of the fascinating geology on an asteroid. We have designed and flown a Taylor-Couette shear cell to investigate granular flow due to rotational shear forces under the conditions of parabolic flight microgravity. The experiments occur under weak compression. First, we present the technical details of the experimental design with particular emphasis on how the equipment has been specifically designed for the parabolic flight environment. Then, we investigate how a steady state granular flow induced by rotational shear forces differs in varying gravitational environments. We find that the effect of constant shearing on the granular material, in a direction perpendicular to the effective acceleration, does not seem to be strongly influenced by gravity. This means that shear bands can form in the presence of a weak gravitational field just as on Earth.

Near-Earth asteroid (1862) Apollo has strong detections of both orbital semimajor axis drift and rotational acceleration. We produce a unified model that can accurately match both observed effects using a single set of thermophysical properties derived from ground-based observations, and we determine Apollo's long term evolution. We use light-curve shape inversion techniques and the ATPM on published light-curve, thermal-infrared, and radar observations to constrain Apollo's thermophysical properties. The derived properties are used to make detailed predictions of Apollo's Yarkovsky and YORP effects, which are then compared with published measurements of orbital drift and rotational acceleration. The ATPM explicitly incorporates 1D heat conduction, shadowing, multiple scattering of sunlight, global self-heating, and rough surface thermal-infrared beaming in the model predictions. We find that ATPM can accurately reproduce the light-curve, thermal-infrared, and radar observations of Apollo, and simultaneously match the observed orbital drift and rotational acceleration using: a shape model with axis ratios of 1.94:1.65:1.00, an effective diameter of 1.55 +/- 0.07 km, a geometric albedo of 0.20 +/- 0.02, a thermal inertia of 140 +140/-100 J m-2 K-1 s-1/2, a highly rough surface, and a bulk density of 2850 +480/-680 kg m-3. Using these properties we predict that Apollo's obliquity is increasing towards the 180 degree YORP asymptotic state at a rate of 1.5 +0.3/-0.5 degrees per 10^5 yr. The derived thermal inertia suggests that Apollo has loose regolith material resting on its surface, which is consistent with Apollo undergoing a recent resurfacing event based on its observed Q-type spectrum. The inferred bulk density is consistent with those determined for other S-type asteroids, and suggests that Apollo has a fractured interior.

We present an adaptation of the ATPM to simultaneously predict the Yarkovsky and YORP effects in the presence of global self-heating that occurs within the large concavities of irregularly shaped asteroids, which has been neglected or dismissed in all previous models. It is also combined with rough surface thermal-infrared beaming effects, which have been previously shown to enhance the Yarkovsky-orbital-drift and dampen on average the YORP-rotational-acceleration by orders of several tens of per cent. Tests on all published concave shape models of near-Earth asteroids, and also on one hundred Gaussian-random-spheres, show that the Yarkovsky effect is sensitive to shadowing and global self-heating effects at the few per cent level or less. For simplicity, Yarkovsky models can neglect these effects if the level of accuracy desired is of this order. Unlike the Yarkovsky effect, the YORP effect can be very sensitive to shadowing and global self-heating effects. Its sensitivity increases with decreasing relative strength of the YORP-rotational-acceleration, and doesn't appear to depend greatly on the degree of asteroid concavity. Global self-heating tends to produce a vertical offset in an asteroid's YORP-rotational-acceleration versus obliquity curve which is in opposite direction to that produced by shadowing effects. It also ensures that at least one critical obliquity angle exists at which zero YORP-rotational-acceleration occurs. Global self-heating must be included for accurate predictions of the YORP effect if an asteroid exhibits a large shadowing effect. If global self-heating effects are not included then it is found in ~75 per cent of cases that better predictions are produced when shadowing is also not included. Furthermore, global self-heating has implications for reducing the sensitivity of the YORP effect predictions to detailed variations in an asteroid's shape model.

In addition to collisions and gravitational forces, it is now becoming widely acknowledged that photon recoil forces and torques from the asymmetric reflection and thermal re-radiation of sunlight are primary mechanisms that govern the rotational evolution of an asteroid. The Yarkovsky-O'Keefe-Radzievskii-Paddack (YORP) effect causes changes in the rotation rate and pole direction of an irregularly shaped asteroid. We present a simple Monte Carlo method to estimate the range of YORP-rotational-accelerations acting on a near-Earth asteroid (NEA) without knowledge of its detailed shape, and to estimate its detectability using light-curve observations. The method requires knowledge of an asteroid's orbital properties and size, and assumes that the future observational circumstances of an asteroid have already been thought through. It is verified by application to the observational circumstances of the seven YORP-investigated asteroids, and is then applied to 540 NEAs with NEOWISE and/or other diameter measurements, and to all NEAs using MPCORB absolute magnitudes. The YORP-detectability is found to be a strong function of the combined asteroid orbital and diameter properties, and is independent of the rotation period for NEAs that don't have very fast or slow rotation rates. The median and 1-sigma spread of YORP-rotational-acceleration expected to be acting on a particular NEA can be estimated from its semimajor axis, eccentricity, and diameter by using (eq. 1) and/or by using (eq. 2) if the diameter is instead estimated from the absolute magnitude by assuming a geometric albedo of 0.1. The length of a light-curve observational campaign required to achieve a 50 per cent probability of detecting the YORP effect in a particular NEA can be estimated by using (eq. 3) and/or by using (eq. 4) for an absolute-magnitude-estimated diameter.

We present a new rough-surface thermophysical model (Advanced Thermophysical Model or ATPM) that describes the observed directional thermal emission from any atmosphereless planetary surface. It explicitly incorporates partial shadowing, scattering of sunlight, selfheating and thermal-infrared beaming (re-radiation of absorbed sunlight back towards the Sun as a result of surface roughness). The model is verified by accurately reproducing ground-based directional thermal emission measurements of the lunar surface using surface properties that are consistent with the findings of the Apollo missions and roughness characterised by an RMS slope of ~32 degrees. By considering the wide range of potential asteroid surface properties, the model implies a beaming effect that cannot be described by a simple parameter or function. It is highly dependent on the illumination and viewing angles as well as surface thermal properties and is predominantly caused by macroscopic rather than microscopic roughness. Roughness alters the effective Bond albedo and thermal inertia of the surface as well as moving the mean emission away from the surface normal. For accurate determination of surface properties from thermal-infrared observations of unresolved bodies or resolved surface elements, roughness must be explicitly modelled, preferably aided with thermal measurements at different emission angles and wavelengths.

It is now becoming widely accepted that photon recoil forces from the asymmetric reflection and thermal re-radiation of absorbed sunlight are, together with collisions and gravitational forces, primary mechanisms governing the dynamical and physical evolution of asteroids. The Yarkovsky effect causes orbital semi-major axis drift and the YORP effect causes changes in the rotation rate and pole orientation. We present an adaptation of the Advanced Thermophysical Model (ATPM) to simultaneously predict the Yarkovsky and YORP effects in the presence of thermal-infrared beaming caused by surface roughness, which has been neglected or dismissed in all previous models. Tests on Gaussian random sphere shaped asteroids, and on the real shapes of asteroids (1620) Geographos and (6489) Golevka, show that rough surface thermal-infrared beaming enhances the Yarkovsky orbital drift by typically tens of percent but it can be as much as a factor of two. The YORP rotational acceleration is on average dampened by up to a third typically but can be as much as one half. We find that the Yarkovsky orbital drift is only sensitive to the average degree, and not to the spatial distribution, of roughness across an asteroid surface. However, the YORP rotational acceleration is sensitive to the surface roughness spatial distribution, and can add significant uncertainties to the predictions for asteroids with relatively weak YORP effects. To accurately predict either effect the degree and spatial distribution of roughness across an asteroid surface must be known.

Asteroid (175706) 1996 FG3 is a binary asteroid and the baseline target for the proposed MarcoPolo-R sample-return mission. We present thermal IR photometry obtained with the ESO VLT+VISIR together with optical photometry obtained with the ESO NTT+EFOSC2 . An absolute visual magnitude H_V = 17.833 \pm 0.024 and phase parameter G = -0.041 \pm 0.005 is derived. The Near-Earth Asteroid Thermal Model (NEATM) has been fitted to the measured fluxes to derive a geometric visual albedo p_v = 0.046 \pm 0.014, effective diameter at the observed aspect D_eff = 1.68 \pm 0.25 km, and beaming parameter {\eta} = 1.15 for phase angle {\alpha} = 11.7{\deg}. The Advanced Thermophysical Model (ATPM) has been fitted to the measured fluxes to derive a more accurate effective diameter D_eff = 1.71 \pm 0.07 km and albedo p_v = 0.044 \pm 0.004. Based on the ATPM results, assuming the same albedo for primary and secondary, we derive a primary mean spherical diameter D_p = (1.69 +0.18/-0.12) km, secondary diameter D_s = 0.51 \pm 0.03 km, and a secondary orbital semi-major axis a = (2.8 +1.7/-0.7) km. A low surface thermal inertia {\Gamma} = 120 \pm 50 J m^-2 s^-1/2 K^-1 was also derived, suggesting a dusty surface and raising questions as to the binary formation mechanism of this asteroid. These physical properties are used to predict a Yarkovsky drift in semi-major axis of (-60 +31/-45) m yr-1.