We report measurements of the fluctuations in atmospheric emission (atmospheric noise) above Mauna Kea recorded with Bolocam at 143 and 268 GHz from the Caltech Submillimeter Observatory (CSO). The 143 GHz data were collected during a 40 night observing run in late 2003, and the 268 GHz observations were made in early 2004 and early 2005 over a total of 60 nights. Below 0.5 Hz, the data time-streams are dominated by atmospheric noise in all observing conditions. The atmospheric noise data are consistent with a Kolmogorov-Taylor (K-T) turbulence model for a thin wind-driven screen, and the median amplitude of the fluctuations is 280 mK^2 rad^(-5/3) at 143 GHz and 4000 mK^2 rad^(-5/3) at 268 GHz. Comparing our results with previous ACBAR data, we find that the normalization of the power spectrum of the atmospheric noise fluctuations is a factor of 80 larger above Mauna Kea than above the South Pole at millimeter wavelengths. Most of this difference is due to the fact that the atmosphere above the South Pole is much drier than the atmosphere above Mauna Kea. However, the atmosphere above the South Pole is slightly more stable as well: the fractional fluctuations in the column depth of precipitable water vapor are a factor of sqrt(2) smaller at the South Pole compared to Mauna Kea. Based on our atmospheric modeling, we developed several algorithms to remove the atmospheric noise, and the best results were achieved when we described the fluctuations using a low-order polynomial in detector position over the 8 arcmin field of view (FOV). However, even with these algorithms, we were not able to reach photon-background-limited instrument photometer (BLIP) performance at frequencies below 0.5 Hz in any observing conditions.

We have surveyed two science fields totaling one square degree with Bolocam at 2.1 mm to search for secondary CMB anisotropies caused by the Sunyaev- Zel'dovich effect (SZE). The fields are in the Lynx and Subaru/XMM SDS1 fields. Our survey is sensitive to angular scales with an effective angular multipole of l_eff = 5700 with FWHM_l = 2800 and has an angular resolution of 60 arcseconds FWHM. Our data provide no evidence for anisotropy. We are able to constrain the level of total astronomical anisotropy, modeled as a flat bandpower in C_l, with frequentist 68%, 90%, and 95% CL upper limits of 590, 760, and 830 uKCMB^2. We statistically subtract the known contribution from primary CMB anisotropy, including cosmic variance, to obtain constraints on the SZE anisotropy contribution. Now including flux calibration uncertainty, our frequentist 68%, 90% and 95% CL upper limits on a flat bandpower in C_l are 690, 960, and 1000 uKCMB^2. When we instead employ the analytic spectrum suggested by Komatsu and Seljak (2002), and account for the non-Gaussianity of the SZE anisotropy signal, we obtain upper limits on the average amplitude of their spectrum weighted by our transfer function of 790, 1060, and 1080 uKCMB^2. We obtain a 90% CL upper limit on sigma8, which normalizes the power spectrum of density fluctuations, of 1.57. These are the first constraints on anisotropy and sigma8 from survey data at these angular scales at frequencies near 150 GHz.

We have developed a completely lithographic antenna-coupled bolometer for CMB polarimetry. The necessary components of a millimeter wave radiometer -- a beam forming element, a band defining filter, and the TES detectors -- are fabricated on a silicon chip with photolithography. The densely populated antennas allow a very efficient use of the focal plane area. We have fabricated and characterized a series of prototype devices. We find that their properties, including the frequency and angular responses, are in good agreement with the theoretical expectations. The devices are undergoing optimization for upcoming CMB experiments.

We have completed a 1.1 mm continuum survey of 7.5 sq deg of the Perseus Molecular Cloud using Bolocam at the Caltech Submillimeter Observatory. This represents the largest millimeter or submillimeter continuum map of Perseus to date. Our map covers more than 30,000 31" (FWHM) resolution elements to a 1 sigma RMS of 15 mJy/beam. We detect a total of 122 cores above a 5 sigma point source mass detection limit of 0.18 M_sun, assuming a dust temperature of 10 K, 60 of which are new millimeter or submillimeter detections. The 1.1 mm mass function is consistent with a broken power law of slope -1.3 (0.5 M_sun<M<2.5 M_sun) and -2.6 (M>2.5 M_sun), similar to the local initial mass function slope. No more than 5% of the total cloud mass is contained in discrete 1.1 mm cores, which account for a total mass of 285 M_sun. We suggest an extinction threshold for millimeter cores of Av~5 mag, based on our calculation of the probability of finding a 1.1 mm core as a function of Av. Much of the cloud is devoid of compact millimeter emission; despite the significantly greater area covered compared to previous surveys, only 5-10 of the newly identified sources lie outside previously observed areas. The two-point correlation function confirms that dense cores in the cloud are highly structured, with significant clustering on scales as large as 2e5 AU. These 1.1 mm results, especially when combined with recently acquired c2d Spitzer Legacy data, will provide a census of dense cores and protostars in Perseus and improve our understanding of the earliest stages of star formation in molecular clouds.

We perform a fluctuation analysis of the 1.1mm Bolocam Lockman Hole Survey, which covers 324 square arcmin to a very uniform point source-filtered RMS noise level of 1.4 mJy/beam. The fluctuation analysis has the significant advantage of utilizing all of the available data. We constrain the number counts in the 1-10 mJy range, and derive significantly tighter constraints than in previous work: the power-law index is 2.7 (+0.18, -0.15), while the amplitude is equal to 1595 (+85,-238) sources per mJy per square degree, or N(>1 mJy) = 940 (+50,-140) sources/square degree (95% confidence). Our results agree extremely well with those derived from the extracted source number counts by Laurent et al (2005). Our derived normalization is about 2.5 times smaller than determined by MAMBO at 1.2mm by Greve et al (2004). However, the uncertainty in the normalization for both data sets is dominated by the systematic (i.e., absolute flux calibration) rather than statistical errors; within these uncertainties, our results are in agreement. We estimate that about 7% of the 1.1mm background has been resolved at 1 mJy.

We present results of a new deep 1.1 mm survey using Bolocam, a millimeter-wavelength bolometer array camera designed for mapping large fields at fast scan rates, without chopping. A map, galaxy candidate list, and derived number counts are presented. This survey encompasses 324 arcmin^2 to an rms noise level (filtered for point sources) of 1.4 mJy/beam and includes the entire regions surveyed by the published 8 mJy 850 micron JCMT SCUBA and 1.2 mm IRAM MAMBO surveys. We reduced the data using a custom software pipeline to remove correlated sky and instrument noise via a principal component analysis. Extensive simulations and jackknife tests were performed to confirm the robustness of our source candidates and estimate the effects of false detections, bias, and completeness. In total, 17 source candidates were detected at a significance > 3.0 sigma, with six expected false detections. Nine candidates are new detections, while eight candidates have coincident SCUBA 850 micron and/or MAMBO 1.2 mm detections. From our observed number counts, we estimate the underlying differential number count distribution of submillimeter galaxies and find it to be in general agreement with previous surveys. Modeling the spectral energy distributions of these submillimeter galaxies after observations of dusty nearby galaxies suggests extreme luminosities of L = 1.0-1.6 x 10^13 L_solar and, if powered by star formation, star formation rates of 500-800 M_solar/yr.