SINFONI is an adaptive optics assisted near-infrared integral field spectrometer for the ESO VLT. The Adaptive Optics Module (built by the ESO Adaptive Optics Group) is a 60-elements curvature-sensor based system, designed for operations with natural or sodium laser guide stars. The near-infrared integral field spectrometer SPIFFI (built by the Infrared Group of MPE) provides simultaneous spectroscopy of 32 x 32 spatial pixels, and a spectral resolving power of up to 3300. The adaptive optics module is in the phase of integration; the spectrometer is presently tested in the laboratory. We provide an overview of the project, with particular emphasis on the problems encountered in designing and building an adaptive optics assisted spectrometer.

SINFONI, the SINgle Faint Object Near-infrared Investigation, is an instrument for the Very Large Telescope (VLT), which will start its operation mid 2002 and allow for the first time near infrared (NIR) integral field spectroscopy at the diffraction limit of an 8-m telescope. SINFONI is the combination of two state-of-the art instruments, the integral field spectrometer SPIFFI, built by the Max-Planck-Institut fuer extraterrestrische Physik (MPE), and the adaptive optics (AO) system MACAO, built by the European Southern Observatory (ESO). It will allow a unique type of observations by delivering simultaneously high spatial resolution (pixel sizes 0.025arcsec to 0.25arcsec) and a moderate spectral resolution (R~2000 to R~4500), where the higher spectral resolution mode will allow for software OH suppression. This opens new prospects for astronomy.

SPIFFI (SPectrometer for Infrared Faint Field Imaging) is the integral field spectrograph of the VLT-instrument SINFONI (SINgle Far Object Near-infrared Investigation). SINFONI is the combination of SPIFFI with the ESO adaptive optics system MACAO (Multiple Application Concept for Adaptive Optics) offering for the first time adaptive optics assisted near infrared integral field spectroscopy at an 8m-telescope. SPIFFI works in the wavelength ranger from 1.1 to 2.5 micron with a spectral resolving power ranging from R=2000 to 4500. Pixel scale ranges from 0.25 to 0.025 seconds of arc. The SPIFFI field-of-view consists of 32x32 pixels which are rearranged with an image slicer to a form a long slit. Based on the 3D slicer concept with plane mirrors, an enhanced image slicer was developed. The SPIFFI image slicer consists of two sets of mirrors, called the 'small' and the 'large' slicer. The small slicer cuts a square field of view into 32 slitlets, each of which is 32 pixels long. The large slicer rearranges the 32 slitlets into a 1024 pixels long slit. The modifications to the 3D slicer concept affect the angles of the plane mirrors of small and large slicer and lead to an improved slit geometry with very little light losses. At a mirror width of 0.3mm the light loss is <5%. All reflective surfaces are flat and can be manufactured with a high surface quality. This is especially important for the adaptive optics mode of SINFONI. We explain the concept of the SPIFFI mirror slicer and describe details of the manufacturing process.

We present SPIFFI, the integral field spectrometer for the VLT. This instrument allows simultaneous observation of infrared spectra in more than 1000 image points of a two dimensional field. With its set of four gratings and a pixel scale that can be varied by a factor of ten, SPIFFI provides high flexibility, and at the same time offers the unique possibility of diffraction limited imaging spectroscopy at an 8m-class telescope, when fed by the adaptive optics system MACAO. We outline the scientific drivers for building such an instrument, the concept of image slicing, the optical design, and the implementation of SPIFFI.