In this report, some cosmological correlation functions are used to evaluate the differential performance between C2075 and P100 GPU cards. In the past, the correlation functions used in this work have been widely studied and exploited on some previous GPU architectures. The analysis of the performance indicates that a speedup in the range from 13 to 15 is achieved without any additional optimization process for the P100 card.

The Cherenkov Telescope Array (CTA) observatory will be one of the largest ground-based very high-energy gamma-ray observatories. The On-Site Analysis will be the first CTA scientific analysis of data acquired from the array of telescopes, in both northern and southern sites. The On-Site Analysis will have two pipelines: the Level-A pipeline (also known as Real-Time Analysis, RTA) and the level-B one. The RTA performs data quality monitoring and must be able to issue automated alerts on variable and transient astrophysical sources within 30 seconds from the last acquired Cherenkov event that contributes to the alert, with a sensitivity not worse than the one achieved by the final pipeline by more than a factor of 3. The Level-B Analysis has a better sensitivity (not be worse than the final one by a factor of 2) and the results should be available within 10 hours from the acquisition of the data: for this reason this analysis could be performed at the end of an observation or next morning. The latency (in particular for the RTA) and the sensitivity requirements are challenging because of the large data rate, a few GByte/s. The remote connection to the CTA candidate site with a rather limited network bandwidth makes the issue of the exported data size extremely critical and prevents any kind of processing in real-time of the data outside the site of the telescopes. For these reasons the analysis will be performed on-site with infrastructures co-located with the telescopes, with limited electrical power availability and with a reduced possibility of human intervention. This means, for example, that the on-site hardware infrastructure should have low-power consumption. A substantial effort towards the optimization of high-throughput computing service is envisioned to provide hardware and software solutions with high-throughput, low-power consumption at a low-cost.

The Cherenkov Telescope Array (CTA) Observatory must be capable of issuing fast alerts on variable and transient sources to maximize the scientific return. This will be accomplished by means of a Real-Time Analysis (RTA) pipeline, a key system of the CTA observatory. The latency and sensitivity requirements of the alarm system impose a challenge because of the large foreseen data flow rate, between 0.5 and 8 GB/s. As a consequence, substantial efforts toward the optimization of this high-throughput computing service are envisaged, with the additional constraint that the RTA should be performed on-site (as part of the auxiliary infrastructure of the telescopes). In this work, the functional design of the RTA pipeline is presented.