As part of our laboratory investigation of the theoretical line profiles used in white dwarf atmosphere models, we extend the electron-density ($n_{\rm e}$) range measured by our experiments to higher densities (up to $n_{e}\sim80\times10^{16}$ cm$^{-3}$). Whereas inferred parameters using the hydrogen-$\beta$ spectral line agree among different line-shape models for $n_{\rm e}\lesssim30\times10^{16}$ cm$^{-3}$, we now see divergence between models. These are densities beyond the range previously benchmarked in the laboratory, meaning theoretical profiles in this regime have not been fully validated. Experimentally exploring these higher densities enables us to test and constrain different line-profile models, as the differences in their relative H-Balmer line shapes are more pronounced at such conditions. These experiments also aid in our study of occupation probabilities because we can measure these from relative line strengths.

We spectroscopically measure multiple hydrogen Balmer line profiles from laboratory plasmas to investigate the theoretical line profiles used in white dwarf atmosphere models. X-ray radiation produced at the Z Pulsed Power Facility at Sandia National Laboratories initiates plasma formation in a hydrogen-filled gas cell, replicating white dwarf photospheric conditions. Here we present time-resolved measurements of H$\beta$ and fit this line using different theoretical line profiles to diagnose electron density, $n_{\rm e}$, and $n=2$ level population, $n_2$. Aided by synthetic tests, we characterize the validity of our diagnostic method for this experimental platform. During a single experiment, we infer a continuous range of electron densities increasing from $n_{\rm e}\sim4$ to $\sim30\times10^{16}\,$cm$^{-3}$ throughout a 120-ns evolution of our plasma. Also, we observe $n_2$ to be initially elevated with respect to local thermodynamic equilibrium (LTE); it then equilibrates within $\sim55\,$ns to become consistent with LTE. This supports our electron-temperature determination of $T_{\rm e}\sim1.3\,$eV ($\sim15,000\,$K) after this time. At $n_{\rm e}\gtrsim10^{17}\,$cm$^{-3}$, we find that computer-simulation-based line-profile calculations provide better fits (lower reduced $\chi^2$) than the line profiles currently used in the white dwarf astronomy community. The inferred conditions, however, are in good quantitative agreement. This work establishes an experimental foundation for the future investigation of relative shapes and strengths between different hydrogen Balmer lines.

Our preliminary results from laboratory experiments studying white dwarf (WD) photospheres show a systematic difference between experimental plasma conditions inferred from measured H$\beta$ absorption line profiles versus those from H$\gamma$. One hypothesis for this discrepancy is an inaccuracy in the relative theoretical line profiles of these two transitions. This is intriguing because atmospheric parameters inferred from H Balmer lines in observed WD spectra show systematic trends such that inferred surface gravities decrease with increasing principal quantum number, $n$. If conditions inferred from lower-$n$ Balmer lines are indeed more accurate, this suggests that spectroscopically determined DA WD masses may be greater than previously thought and in better agreement with the mean mass determined from gravitational redshifts.

Experimental tests are in progress to evaluate the accuracy of the modeled iron opacity at solar interior conditions [J.E. Bailey et al., Phys. Plasmas 16, 058101 (2009)]. The iron sample is placed on top of the Sandia National Laboratories z-pinch dynamic hohlraum (ZPDH) radiation source. The samples are heated to 150 - 200 eV electron temperatures and 7e21 - 4e22 e/cc electron densities by the ZPDH radiation and backlit at its stagnation [T. Nagayama et al., Phys. Plasmas 21, 056502 (2014)]. The backlighter attenuated by the heated sample plasma is measured by four spectrometers along +/- 9 degree with respect to the z-pinch axis to infer the sample iron opacity. Here we describe measurements of the source-to-sample distance that exploit the parallax of spectrometers that view the half-moon-shaped sample from +/-9 degree. The measured sample temperature decreases with increased source-to-sample distance. This distance must be taken into account for understanding the sample heating.

Experimental tests are in progress to evaluate the accuracy of the modeled iron opacity at solar interior conditions, in particular to better constrain the solar abundance problem [S. Basu and H.M. Antia, Physics Reports 457, 217 (2008)]. Here we describe measurements addressing three of the key requirements for reliable opacity experiments: control of sample conditions, independent sample condition diagnostics, and verification of sample condition uniformity. The opacity samples consist of iron/magnesium layers tamped by plastic. By changing the plastic thicknesses, we have controlled the iron plasma conditions to reach i) Te=167+/-3 eV and ne=(7.1+/-1.5)e21 e/cc, ii) Te=170+/-2 eV and ne=(2.0+/-0.2)e22 e/cc, and iii) Te=196+/-6 eV and ne=(3.8+/-0.8)e22 e/cc, which were measured by magnesium tracer K-shell spectroscopy. The opacity sample non-uniformity was directly measured by a separate experiment where Al is mixed into the side of the sample facing the radiation source and Mg into the other side. The iron condition was confirmed to be uniform within their measurement uncertainties by Al and Mg K-shell spectroscopy. The conditions are suitable for testing opacity calculations needed for modeling the solar interior, other stars, and high energy density plasmas.

We present an experimental platform for measuring hydrogen Balmer emission and absorption line profiles for plasmas with white dwarf (WD) photospheric conditions (T_e ~ 1 eV, n_e ~ 10^17 cm^-3). These profiles will be used to benchmark WD atmosphere models, which, used with the spectroscopic method, are responsible for determining fundamental parameters (e.g., effective temperature, mass) for tens of thousands of WDs. Our experiment, performed at the Z Pulsed Power Facility at Sandia National Laboratories, uses the large amount of x-rays generated from a z-pinch dynamic hohlraum to drive plasma formation in a gas cell. The platform is unique compared to past hydrogen line profile experiments in that the plasma is radiation-driven. This decouples the heating source from the plasma to be studied in the sense that the radiation temperature causing the photoionization is independent of the initial conditions of the gas. For the first time we measure hydrogen Balmer lines in absorption at these conditions in the laboratory for the purpose of benchmarking Stark-broadened line shapes. The platform can be used to study other plasma species and to explore non-LTE, time-dependent collisional-radiative atomic kinetics.

Astrophysics experiments by Falcon et al. to create white dwarf photospheres in the laboratory are currently underway. The experimental platform measures Balmer line profiles of a radiation-driven, pure hydrogen plasma in emission and in absorption for conditions at T_e ~ 1 eV, n_e ~ 10^17 cm^-3. These will be used to compare and test line broadening theories used in white dwarf atmosphere models. The flexibility of the platform allows us to expand the direction of our experiments using other compositions. We discuss future prospects such as exploring helium plasmas and carbon/oxygen plasmas relevant to the photospheres of DBs and hot DQs, respectively.