We present the Mid-infrared stellar Diameters and Fluxes compilation Catalogue (MDFC) dedicated to long-baseline interferometry at mid-infrared wavelengths (3-13 mum). It gathers data for half a million stars, i.e. nearly all the stars of the Hipparcos-Tycho catalogue whose spectral type is reported in the SIMBAD database. We cross-match 26 databases to provide basic information, binarity elements, angular diameter, magnitude and flux in the near and mid-infrared, as well as flags that allow us to identify the potential calibrators. The catalogue covers the entire sky with 465 857 stars, mainly dwarfs and giants from B to M spectral types closer than 18 kpc. The smallest reported values reach 0.16 muJy in L and 0.1 muJy in N for the flux, and 2 microarcsec for the angular diameter. We build 4 lists of calibrator candidates for the L- and N-bands suitable with the Very Large Telescope Interferometer (VLTI) sub- and main arrays using the MATISSE instrument. We identify 1 621 candidates for L and 44 candidates for N with the Auxiliary Telescopes (ATs), 375 candidates for both bands with the ATs, and 259 candidates for both bands with the Unit Telescopes (UTs). Predominantly cool giants, these sources are small and bright enough to belong to the primary lists of calibrator candidates. In the near future, we plan to measure their angular diameter with 1% accuracy.

We present in this paper the general formalism and data processing steps used in the MATISSE data reduction software, as it has been developed by the MATISSE consortium. The MATISSE instrument is the mid-infrared new generation interferometric instrument of the Very Large Telescope Interferometer (VLTI). It is a 2-in-1 instrument with 2 cryostats and 2 detectors: one 2k x 2k Rockwell Hawaii 2RG detector for L\&M-bands, and one 1k x 1k Raytheon Aquarius detector for N-band, both read at high framerates, up to 30 frames per second. MATISSE is undergoing its first tests in laboratory today.

This paper presents the sharpest near-IR images of the massive cluster R136 to date, based on the extreme adaptive optics of the SPHERE focal instrument implemented on the ESO/VLT and operated in its IRDIS imaging mode. Stacking-up a few hundreds of short exposures in J and Ks spectral bands over a FoV of 10.9"x12.3" centered on the R136a1 stellar component, enabled us to carry a refined photometric analysis of the core of R136. We detected 1110 and 1059 sources in J and Ks images respectively with 818 common sources. Thanks to better angular resolution and dynamic range, we found that more than 62.6% (16.5%) of the stars, detected both in J and Ks data, have neighbours closer than 0.2" (0.1"). Among resolved and detected sources R136a1 and R136c have visual companions and R136a3 is resolved as two stars separated by 59mas. The new set of detected sources were used to re-assess the age and extinction of R136 based on 54 spectroscopically stars that have been recently studied with HST slit-spectroscopy. Over 90% of these 54 sources identified visual companions (closer than 0.2"). We found the most probable age and extinction for these sources within the photometric and spectroscopic error-bars. Additionally, using PARSEC evolutionary isochrones and tracks, we estimated the stellar mass range for each detected source (common in J and K data) and plotted the generalized histogram of mass (MF with error-bars). Using SPHERE data, we have gone one step further and partially resolved and studied the IMF covering mass range of (3-300) Msun at the age of 1 and 1.5 Myr. The density in the core of R136 is estimated and extrapolated in 3D and larger radii (up to 6pc). We show that the stars in the core are still unresolved due to crowding, and the results we obtained are upper limits. Higher angular resolution is mandatory to overcome these difficulties.

MATISSE is the second-generation mid-infrared spectrograph and imager for the Very Large Telescope Interferometer (VLTI) at Paranal. This new interferometric instrument will allow significant advances by opening new avenues in various fundamental research fields: studying the planet-forming region of disks around young stellar objects, understanding the surface structures and mass loss phenomena affecting evolved stars, and probing the environments of black holes in active galactic nuclei. As a first breakthrough, MATISSE will enlarge the spectral domain of current optical interferometers by offering the L and M bands in addition to the N band. This will open a wide wavelength domain, ranging from 2.8 to 13 um, exploring angular scales as small as 3 mas (L band) / 10 mas (N band). As a second breakthrough, MATISSE will allow mid-infrared imaging - closure-phase aperture-synthesis imaging - with up to four Unit Telescopes (UT) or Auxiliary Telescopes (AT) of the VLTI. Moreover, MATISSE will offer a spectral resolution range from R ~ 30 to R ~ 5000. Here, we present one of the main science objectives, the study of protoplanetary disks, that has driven the instrument design and motivated several VLTI upgrades (GRA4MAT and NAOMI). We introduce the physical concept of MATISSE including a description of the signal on the detectors and an evaluation of the expected performances. We also discuss the current status of the MATISSE instrument, which is entering its testing phase, and the foreseen schedule for the next two years that will lead to the first light at Paranal.

MATISSE (Multi AperTure mid-Infrared SpectroScopic Experiment) is the next generation spectro-interferometer at the European Southern Observatory VLTI operating in the spectral bands L, M and N, and combining four beams from the unit and auxiliary telescopes. MATISSE is now fully integrated at the Observatoire de la C\^ote d'Azur in Nice (France), and has entered very recently its testing phase in laboratory. This paper summarizes the equations describing the MATISSE signal and the associated sources of noise. The specifications and the expected performances of the instrument are then evaluated taking into account the current characteristics of the instrument and the VLTI infrastructure, including transmission and contrast degradation budgets. In addition, we present the different MATISSE simulation tools that will be made available to the future users.

We present high spectral resolution aperture-synthesis imaging of the red supergiant Antares (alpha Sco) in individual CO first overtone lines with VLTI/AMBER. The reconstructed images reveal that the star appears differently in the blue wing, line center, and red wing and shows an asymmetrically extended component. The appearance of the star within the CO lines changes drastically within one year, implying a significant change in the velocity field in the atmosphere. Our modeling suggests an outer atmosphere (MOLsphere) extending to 1.2--1.4 stellar radii with CO column densities of (0.5--1)x10^{20} cm^{-2} and a temperature of ~2000 K. While the velocity field in 2009 is characterized by strong upwelling motions at 20--30 km/s, it changed to strong downdrafts in 2010. On the other hand, the AMBER data in the continuum show only a slight deviation from limb-darkened disks and only marginal time variations. We derive a limb-darkened disk diameter of 37.38+/-0.06 mas and a power-law-type limb-darkening parameter of (8.7+/-1.6)x10^{-2} (2009) and 37.31+/-0.09 mas and (1.5+/-0.2)x10^{-1} (2010). We also obtain Teff = 3660+/-120 K and log L/Lsun = 4.88+/-0.23, which suggests a mass of 15+/-5 Msun with an age of 11-15 Myr. This age is consistent with the recently estimated age for the Upper Scorpius OB association. The properties of the outer atmosphere of Antares are similar to those of another well-studied red supergiant, Betelgeuse. The density of the extended outer atmosphere of Antares and Betelgeuse is higher than predicted by the current 3-D convection simulations by at least six orders of magnitude, implying that convection alone cannot explain the formation of the extended outer atmosphere.

Aims. We study the enigmatic B[e] star MWC 300 to investigate its disk and binary with milli-arcsecond-scale angular resolution. Methods. We observed MWC 300 with the VLTI/AMBER instrument in the H and K bands and compared these observations with temperature-gradient models to derive model parameters. Results. The measured low visibility values, wavelength dependence of the visibilities, and wavelength dependence of the closure phase directly suggest that MWC 300 consists of a resolved disk and a close binary. We present a model consisting of a binary and a temperature-gradient disk that is able to reproduce the visibilities, closure phases, and spectral energy distribution. This model allows us to constrain the projected binary separation (~4.4 mas or ~7.9 AU), the flux ratio of the binary components (~2.2), the disk temperature power-law index, and other parameters.

We study the sub-AU-scale circumstellar environment of the Herbig Ae star HD144432 with near-infrared (NIR) VLTI/AMBER observations to investigate the structure of its inner dust disk. The interferometric observations were carried out with the AMBER instrument in the H and K band. We interpret the measured H- and K-band visibilities, the near- and mid-infrared visibilities from the literature, and the SED of HD144432 by using geometric ring models and ring-shaped temperature-gradient disk models with power-law temperature distributions. We derived a K-band ring-fit radius of 0.17 \pm 0.01 AU and an H-band radius of 0.18 \pm 0.01 AU (for a distance of 145 pc). This measured K-band radius of \sim0.17 AU lies in the range between the dust sublimation radius of \sim0.13 AU (predicted for a dust sublimation temperature of 1500 K and gray dust) and the prediction of models including backwarming (\sim0.27 AU). We found that an additional extended halo component is required in both the geometric and temperature-gradient modeling. In the best temperature- gradient model, the disk consists of two components. The inner part of the disk is a thin ring with an inner radius of \sim0.21 AU, a temperature of \sim1600 K, and a ring thickness \sim0.02 AU. The outer part extends from \sim1 AU to \sim10 AU with an inner temperature of \sim400 K. We find that the disk is nearly face-on with an inclination angle of < 28 degree. Our temperature-gradient modeling suggests that the NIR excess is dominated by emission from a narrow, bright rim located at the dust sublimation radius, while an extended halo component contributes \sim6% to the total flux at 2 {\mu}m. The MIR model emission has a two-component structure with \sim20% flux from the inner ring and the rest from the outer part. This two-component structure suggests a disk gap, which is possibly caused by the shadow of a puffed-up inner rim.

The observable quantities in optical interferometry, which are the modulus and the phase of the complex visibility, may be corrupted by parasitic fringes superimposed on the genuine fringe pattern. These fringes are due to an interference phenomenon occurring from straylight effects inside an interferometric instrument. We developed an analytical approach to better understand this phenomenon when straylight causes crosstalk between beams. We deduced that the parasitic interference significantly affects the interferometric phase and thus the associated observables including the differential phase and the closure phase. The amount of parasitic flux coupled to the piston between beams appears to be very influential in this degradation. For instance, considering a point-like source and a piston ranging from $\lambda/500$ to $\lambda/5$ in L band ($\lambda=3.5\:\mu$m), a parasitic flux of about 1\% of the total flux produces a parasitic phase reaching at most one third of the intrinsic phase. The piston, which can have different origins (instrumental stability, atmospheric perturbations, ...), thus amplifies the effect of parasitic interference. According to specifications of piston correction in space or at ground level (respectively $\lambda/500\approx 2$nm and $\lambda/30\approx 100$nm), the detection of hot Jupiter-like planets, one of the most challenging aims for current ground-based interferometers, limits parasitic radiation to about 5\% of the incident intensity. This was evaluated by considering different types of hot Jupiter synthetic spectra. Otherwise, if no fringe tracking is used, the detection of a typical hot Jupiter-like system with a solar-like star would admit a maximum level of parasitic intensity of 0.01\% for piston errors equal to $\lambda$/15. If the fringe tracking specifications are not precisely observed, it thus appears that the allowed level of parasitic intensity dramatically decreases and may prevent the detection. In parallel, the calibration of the parasitic phase by a reference star, at this accuracy level, seems very difficult. Moreover, since parasitic phase is an object-dependent quantity, the use of a hypothetical phase abacus, directly giving the parasitic phase from a given parasitic flux level, is also impossible. Some instrumental solutions, implemented at the instrument design stage for limiting or preventing this parasitic interference, appears to be crucial and are presented in this paper.

While doing optical study in an instrument similar to the interferometers dedicated to the Very Large Telescope (VLT), we have to take care of the pupil and focus conjugations. Modules with artificial sources are designed to simulate the stellar beams, in terms of collimation and pupil location. They constitute alignment and calibration tools. In this paper, we present such a module in which the pupil mask is not located in a collimated beam thus introducing Fresnel diffraction. We study the instrumental contrast taking into account the spatial coherence of the source, and the pupil diffraction. The considered example is MATISSE, but this study can apply to any other instrument concerned with Fresnel diffraction.

Due to the recent dramatic technological advances, infrared interferometry can now be applied to new classes of objects, resulting in exciting new science prospects, for instance, in the area of high-mass star formation. Although extensively studied at various wavelengths, the process through which massive stars form is still only poorly understood. For instance, it has been proposed that massive stars might form like low-mass stars by mass accretion through a circumstellar disk/envelope, or otherwise by coalescence in a dense stellar cluster. After discussing the technological challenges which result from the special properties of these objects, we present first near-infrared interferometric observations, which we obtained on the massive YSO IRAS 13481-6124 using VLTI/AMBER infrared long-baseline interferometry and NTT speckle interferometry. From our extensive data set, we reconstruct a model-independent aperture synthesis image which shows an elongated structure with a size of 13x19 AU, consistent with a disk seen under an inclination of 45 degree. The measured wavelength-dependent visibilities and closure phases allow us to derive the radial disk temperature gradient and to detect a dust-free region inside of 9.5 AU from the star, revealing qualitative and quantitative similarities with the disks observed in low-mass star formation. In complementary mid-infrared Spitzer and sub-millimeter APEX imaging observations we detect two bow shocks and a molecular out ow which are oriented perpendicular to the disk plane and indicate the presence of a bipolar outflow emanating from the inner regions of the system.

Circumstellar disks are an essential ingredient of the formation of low-mass stars. It is unclear, however, whether the accretion-disk paradigm can also account for the formation of stars more massive than about 10 solar masses, in which strong radiation pressure might halt mass infall. Massive stars may form by stellar merging, although more recent theoretical investigations suggest that the radiative-pressure limit may be overcome by considering more complex, nonspherical infall geometries. Clear observational evidence, such as the detection of compact dusty disks around massive young stellar objects, is needed to identify unambiguously the formation mode of the most massive stars. Here we report near-infrared interferometric observations that spatially resolve the astronomical unit-scale distribution of hot material around a high-mass (approx. 20 solar masses) young stellar object. The image shows an elongated structure with a size of about 13 x 19 astronomical units, consistent with a disk seen at an inclination angle of 45 degree. Using geometric and detailed physical models, we found a radial temperature gradient in the disk, with a dust-free region less than 9.5 astronomical units from the star, qualitatively and quantitatively similar to the disks observed in low-mass star formation. Perpendicular to the disk plane we observed a molecular outflow and two bow shocks, indicating that a bipolar outflow emanates from the inner regions of the system.

We present new long-baseline spectro-interferometric observations of the HerbigAe star HD163296 obtained in the H and K bands with the AMBER instrument at VLTI. The observations cover a range of spatial resolutions between 3 and 12 milli-arcseconds, with a spectral resolution of ~30. With a total of 1481 visibilities and 432 closure phases, they result in the best (u,v) coverage achieved on a young star so far. The circumstellar material is resolved at the sub-AU spatial scale and closure phase measurements indicate a small but significant deviation from point-symmetry. We discuss the results assuming that the near-infrared excess in HD163296 is dominated by the emission of a circumstellar disk. A successful fit to the spectral energy distribution, near-infrared visibilities and closure phases is found with a model where a dominant contribution to the H and K band emissions arises from an optically thin, smooth and point-symmetric region extending from about 0.1 to 0.45 AU. At the latter distance from the star, silicates condense, the disk becomes optically thick and develops a puffed-up rim, whose skewed emission can account for the non-zero closure phases. We discuss the nature of the inner disk emission and tentatively rule out dense molecular gas as well as optically thin atomic or ionized gas as its possible origin. We propose instead that the inner emission traces the presence of very refractory grains in a partially cleared region, extending at least to 0.5 AU. If so, we may be observing the disk of HD163296 just before it reaches the transition disk phase. However, we note that the nature of the refractory grains or even the possibility for any grain to survive at the very high temperatures we require (~2100-2300 K at 0.1 AU from the star) is unclear and should be investigated further.

Context. The star HD 87643, exhibiting the "B[e] phenomenon", has one of the most extreme infrared excesses for this object class. It harbours a large amount of both hot and cold dust, and is surrounded by an extended reflection nebula. Aims. One of our major goals was to investigate the presence of a companion in HD87643. In addition, the presence of close dusty material was tested through a combination of multi-wavelength high spatial 5Aresolution observations. Methods. We observed HD 87643 with high spatial resolution techniques, using the near-IR AMBER/VLTI interferometer with baselines ranging from 60 m to 130 m and the mid-IR MIDI/VLTI interferometer with baselines ranging from 25 m to 65 m. These observations are complemented by NACO/VLT adaptive-optics-corrected images in the K and L-bands, ESO-2.2m optical Wide-Field Imager large-scale images in the B, V and R-bands, Results. We report the direct detection of a companion to HD 87643 by means of image synthesis using the AMBER/VLTI instrument. The presence of the companion is confirmed by the MIDI and NACO data, although with a lower confidence. The companion is separated by ~ 34 mas with a roughly north-south orientation. The period must be large (several tens of years) and hence the orbital parameters are not determined yet. Binarity with high eccentricity might be the key to interpreting the extreme characteristics of this system, namely a dusty circumstellar envelope around the primary, a compact dust nebulosity around the binary system and a complex extended nebula witnessing past violent ejections.

This paper presents a study of the atmospheric refraction and its effect on the light coupling efficiency in an instrument using single-mode optical fibers. We show the analytical approach which allowed us to assess the need to correct the refraction in J- and H-bands while observing with an 8-m Unit Telescope. We then developed numerical simulations to go further in calculations. The hypotheses on the instrumental characteristics are those of AMBER (Astronomical Multi BEam combineR), the near infrared focal beam combiner of the Very Large Telescope Interferometric mode (VLTI), but most of the conclusions can be generalized to other single-mode instruments. We used the software package caos (Code for Adaptive Optics Systems) to take into account the atmospheric turbulence effect after correction by the ESO system MACAO (Multi-Application Curvature Adaptive Optics). The opto-mechanical study and design of the system correcting the atmospheric refraction on AMBER is then detailed. We showed that the atmospheric refraction becomes predominant over the atmospheric turbulence for some zenith angles z and spectral conditions: for z larger than 30{\circ} in J-band for example. The study of the optical system showed that it allows to achieve the required instrumental performance in terms of throughput in J- and H-bands. First observations in J-band of a bright star, alpha Cir star, at more than 30{\circ} from zenith clearly showed the gain to control the atmospheric refraction in a single mode instrument, and validated the operating law.

We present some of the High Dynamic Range Imaging activities developed around the coronagraphic test-bench of the Laboratoire A. H. Fizeau (Nice). They concern research and development of an Apodized Lyot Coronagraph (ALC) for the VLT-SPHERE instrument and experimental results from our testbed working in the visible domain. We determined by numerical simulations the specifications of the apodizing filter and searched the best technological process to manufacture it. We present the results of the experimental tests on the first apodizer prototype in the visible and the resulting ALC nulling performances. The tests concern particularly the apodizer characterization (average transmission radial profile, global reflectivity and transmittivity in the visible), ALC nulling performances compared with expectations, sensitivity of the ALC performances to misalignments of its components.

This paper describes the design goals and engineering efforts that led to the realization of AMBER (Astronomical Multi BEam combineR) and to the achievement of its present performance. On the basis of the general instrumental concept, AMBER was decomposed into modules whose functions and detailed characteristics are given. Emphasis is put on the spatial filtering system, a key element of the instrument. We established a budget for transmission and contrast degradation through the different modules, and made the detailed optical design. The latter confirmed the overall performance of the instrument and defined the exact implementation of the AMBER optics. The performance was assessed with laboratory measurements and commissionings at the VLTI, in terms of spectral coverage and resolution, instrumental contrast higher than 0.80, minimum magnitude of 11 in K, absolute visibility accuracy of 1%, and differential phase stability of 1E-3 rad over one minute.

The detection and characterization of extrasolar planets with SPHERE (Spectro Polarimetric High contrast Exoplanet REsearch) is challenging and in particular relies on the ability of a coronagraph to attenuate the diffracted starlight. SPHERE includes 3 instruments, 2 of which can be operated simultaneously in the near IR from 0.95 to 1.8 microns. This requirements is extremely critical for coronagraphy. This paper briefly introduces the concepts of 2 coronagraphs, the Half-Wave Plate Four Quadrant Phase Masks and the Apodized Pupil Lyot Coronagraph, prototyped within the SPHERE consortium by LESIA (Observatory of Paris) and FIZEAU (University of Nice) respectively. Then, we present the measurements of contrast and sensitivity analysis. The comparison with technical specifications allows to validate the technology for manufacturing these coronagraphs.

51 Oph is one of the few young Be stars displaying a strong CO overtone emission at 2.3 microns in addition to the near infrared excess commonly observed in this type of stars. In this paper we first aim to locate the CO bandheads emitting region. Then, we compare its position with respect to the region emitting the near infrared continuum. We have observed 51 Oph with AMBER in low spectral resolution (R=35), and in medium spectral resolution (R=1500) centered on the CO bandheads. The medium resolution AMBER observations clearly resolve the CO bandheads. Both the CO bandheads and continuum emissions are spatially resolved by the interferometer. Using simple analytical ring models to interpret the measured visibilities, we find that the CO bandheads emission region is compact, located at $0.15_{-0.04}^{0.07}$AU from the star, and that the adjacent continuum is coming from a region further away $0.25_{-0.03}^{0.06}$AU. These results confirm the commonly invoked scenario in which the CO bandheads originate in a dust free hot gaseous disk. Furthermore, the continuum emitting region is closer to the star than the dust sublimation radius (by at least a factor two) and we suggest that hot gas inside the dust sublimation radius significantly contributes to the observed 2 $\mu$m continuum emission.

Aims. We study the geometry and kinematics of the circumstellar environment of the Be star Kappa CMa in the Br gamma emission line and its nearby continuum. Methods. We use the VLTI/AMBER instrument operating in the K band which provides a spatial resolution of about 6 mas with a spectral resolution of 1500 to study the kinematics within the disk and to infer its rotation law. In order to obtain more kinematical constraints we also use an high spectral resolution Pa beta line profile obtain in December 2005 at the Observatorio do Pico do Dios, Brazil and we compile V/R line profile variations and spectral energy distribution data points from the literature. Results. Using differential visibilities and differential phases across the Br gamma line we detect an asymmetry in the disk. Moreover, we found that kappa CMa seems difficult to fit within the classical scenario for Be stars, illustrated recently by alpha Arae observations, i.e. a fast rotating B star close to its breakup velocity surrounded by a Keplerian circumstellar disk with an enhanced polar wind. Finally we discuss the possibility for kappa CMa to be a critical rotator with a Keplerian rotating disk and try to see if the detected asymmetry can be interpreted within the "one-armed" viscous disk framework.

In this work, we present the first AMBER observations, of the Wolf-Rayet and O (WR+O) star binary system y2 Velorum. The AMBER instrument was used with the telescopes UT2, UT3, and UT4 on baselines ranging from 46m to 85m. It delivered spectrally dispersed visibilities, as well as differential and closure phases, with a resolution R = 1500 in the spectral band 1.95-2.17 micron. We interpret these data in the context of a binary system with unresolved components, neglecting in a first approximation the wind-wind collision zone flux contribution. We show that the AMBER observables result primarily from the contribution of the individual components of the WR+O binary system. We discuss several interpretations of the residuals, and speculate on the detection of an additional continuum component, originating from the free-free emission associated with the wind-wind collision zone (WWCZ), and contributing at most to the observed K-band flux at the 5% level. The expected absolute separation and position angle at the time of observations were 5.1&plusmn;0.9mas and 66&plusmn;15&deg; respectively. However, we infer a separation of 3.62+0.11-0.30 mas and a position angle of 73+9-11&deg;. Our analysis thus implies that the binary system lies at a distance of 368+38-13 pc, in agreement with recent spectrophotometric estimates, but significantly larger than the Hipparcos value of 258+41-31 pc.

AMBER is the first near infrared focal instrument of the VLTI. It combines three telescopes and produces spectrally resolved interferometric measures. This paper discusses some preliminary results of the first scientific observations of AMBER with three Unit Telescopes at medium (1500) and high (12000) spectral resolution. We derive a first set of constraints on the structure of the circumstellar material around the Wolf Rayet Gamma2 Velorum and the LBV Eta Carinae.

We present the first VLTI/MIDI observations of the Be star Alpha Ara, showing a nearly unresolved circumstellar disk in the N band. The interferometric measurements made use of the UT1 and UT3 telescopes. The projected baselines were 102 and 74 meters with position angles of 7 degres and 55 degres, respectively. These measurements put an upper limit to the envelope size in the N band under the Uniform disk approximation of $\phi_{\rm max}= 4\pm1.5$ mas, corresponding to 14 $R_{\star}$, assuming $R_{\star}$=4.8${\rm R}_\odot$ and the Hipparcos distance of 74pc. On the other hand the disk density must be large enough to produce the observed strong Balmer line emission. In order to estimate the possible circumstellar and stellar parameters we have used the SIMECA code developed by Stee (1995) and Stee & Bittar (2001). Optical spectra taken with the echelle instrument Heros and the ESO-50cm telescope, as well as infrared ones from the 1.6m Brazilian telescope have been used together with the MIDI spectra and visibilities. These observations put complementary constraints on the density and geometry of Alpha Ara circumstellar disk. We discuss on the potential truncation of the disk by a companion and we present spectroscopic indications of a periodic perturbation of some Balmer lines.