We present the discovery and validation of a three-planet system orbiting the nearby (31.1 pc) M2 dwarf star TOI-700 (TIC 150428135). TOI-700 lies in the TESS continuous viewing zone in the Southern Ecliptic Hemisphere; observations spanning 11 sectors reveal three planets with radii ranging from 1 R$_\oplus$ to 2.6 R$_\oplus$ and orbital periods ranging from 9.98 to 37.43 days. Ground-based follow-up combined with diagnostic vetting and validation tests enable us to rule out common astrophysical false-positive scenarios and validate the system of planets. The outermost planet, TOI-700 d, has a radius of $1.19\pm0.11$ R$_\oplus$ and resides in the conservative habitable zone of its host star, where it receives a flux from its star that is approximately 86% of the Earth's insolation. In contrast to some other low-mass stars that host Earth-sized planets in their habitable zones, TOI-700 exhibits low levels of stellar activity, presenting a valuable opportunity to study potentially-rocky planets over a wide range of conditions affecting atmospheric escape. While atmospheric characterization of TOI-700 d with the James Webb Space Telescope (JWST) will be challenging, the larger sub-Neptune, TOI-700 c (R = 2.63 R$_\oplus$), will be an excellent target for JWST and beyond. TESS is scheduled to return to the Southern Hemisphere and observe TOI-700 for an additional 11 sectors in its extended mission, which should provide further constraints on the known planet parameters and searches for additional planets and transit timing variations in the system.

AU Microscopii (AU Mic) is the second closest pre main sequence star, at a distance of 9.79 parsecs and with an age of 22 million years. AU Mic possesses a relatively rare and spatially resolved3 edge-on debris disk extending from about 35 to 210 astronomical units from the star, and with clumps exhibiting non-Keplerian motion. Detection of newly formed planets around such a star is challenged by the presence of spots, plage, flares and other manifestations of magnetic activity on the star. Here we report observations of a planet transiting AU Mic. The transiting planet, AU Mic b, has an orbital period of 8.46 days, an orbital distance of 0.07 astronomical units, a radius of 0.4 Jupiter radii, and a mass of less than 0.18 Jupiter masses at 3 sigma confidence. Our observations of a planet co-existing with a debris disk offer the opportunity to test the predictions of current models of planet formation and evolution.

Hot Jupiters are rarely accompanied by other planets within a factor of a few in orbital distance. Previously, only two such systems have been found. Here, we report the discovery of a third system using data from the Transiting Exoplanet Survey Satellite (TESS). The host star, TOI-1130, is an 11th magnitude K-dwarf in the Gaia G band. It has two transiting planets: a Neptune-sized planet ($3.65\pm 0.10$ $R_E$) with a 4.1-day period, and a hot Jupiter ($1.50^{+0.27}_{-0.22}$ $R_J$) with an 8.4-day period. Precise radial-velocity observations show that the mass of the hot Jupiter is $0.974^{+0.043}_{-0.044}$ $M_J$. For the inner Neptune, the data provide only an upper limit on the mass of 0.17 $M_J$ (3$\sigma$). Nevertheless, we are confident the inner planet is real, based on follow-up ground-based photometry and adaptive optics imaging that rule out other plausible sources of the TESS transit signal. The unusual planetary architecture of and the brightness of the host star make TOI-1130 a good test case for planet formation theories, and an attractive target for future spectroscopic observations.

We analyze the phase curve of the short-period transiting hot Jupiter system WASP-19, which was observed by the Transiting Exoplanet Survey Satellite ($TESS$) in Sector 9. WASP-19 is one of only five transiting exoplanet systems with full-orbit phase curve measurements at both optical and infrared wavelengths. We measure a secondary eclipse depth of $470^{+130}_{-110}$ ppm and detect a strong atmospheric brightness modulation signal with a semi-amplitude of $319\pm51$ ppm. No significant offset is detected between the substellar point and the region of maximum brightness on the dayside. There is also no significant nightside flux detected, which is in agreement with the nightside effective blackbody temperature of $1090^{+190}_{-250}$ derived from the published $Spitzer$ phase curves for this planet. Placing the eclipse depth measured in the $TESS$ bandpass alongside the large body of previous values from the literature, we carry out the first atmospheric retrievals of WASP-19b's secondary eclipse spectrum using the SCARLET code. The retrieval analysis indicates that WASP-19b has a dayside atmosphere consistent with an isotherm at $T=2240\pm40$ K and a visible geometric albedo of $0.16\pm0.04$, indicating significant contribution from reflected starlight in the $TESS$ bandpass and moderately efficient day-night heat transport.

The Neptune desert is a feature seen in the radius-mass-period plane, whereby a notable dearth of short period, Neptune-like planets is found. Here we report the {\it TESS} discovery of a new short-period planet in the Neptune desert, orbiting the G-type dwarf TYC\,8003-1117-1 (TOI-132). {\it TESS} photometry shows transit-like dips at the level of $\sim$1400 ppm occurring every $\sim$2.11 days. High-precision radial velocity follow-up with HARPS confirmed the planetary nature of the transit signal and provided a semi-amplitude radial velocity variation of $\sim$11.5 m s$^{-1}$, which, when combined with the stellar mass of $0.97\pm0.06$ $M_{\odot}$, provides a planetary mass of 22.83$^{+1.81}_{-1.80}$ $M_{\oplus}$. Modeling the {\it TESS} high-quality light curve returns a planet radius of 3.43$^{+0.13}_{-0.14}$ $R_{\oplus}$, and therefore the planet bulk density is found to be 3.11$^{+0.44}_{-0.450}$ g cm$^{-3}$. Planet structure models suggest that the bulk of the planet mass is in the form of a rocky core, with an atmospheric mass fraction of 4.3$^{+1.2}_{-2.3}$\%. TOI-132 b is a {\it TESS} Level 1 Science Requirement candidate, and therefore priority follow-up will allow the search for additional planets in the system, whilst helping to constrain low-mass planet formation and evolution models, particularly valuable for better understanding the Neptune desert.

The exoplanet HD 118203 b, orbiting a bright (V = 8.05) host star, was discovered using the radial velocity method by da Silva et al. (2006), but was not previously known to transit. TESS photometry has revealed that this planet transits its host star. Five planetary transits were observed by TESS, allowing us to measure the radius of the planet to be $1.133 \pm 0.031 R_J$, and to calculate the planet mass to be $2.173 \pm 0.078 M_J$. The host star is slightly evolved with an effective temperature of $T_{\rm eff} = 5692 \pm 83$ K and a surface gravity of ${\rm log}(g) = 3.891 \pm 0.019$. With an orbital period of $6.134980 \pm 0.000038$ days and an eccentricity of $0.316 \pm 0.021$, the planet occupies a transitional regime between circularized hot Jupiters and more dynamically active planets at longer orbital periods. The host star is among the ten brightest known to have transiting giant planets, providing opportunities for both planetary atmospheric and asteroseismic studies.

We report the discovery of TOI 263.01 (TIC 120916706), a transiting substellar object (R = 0.87 RJup) orbiting a faint M3.5~V dwarf (V=18.97) on a 0.56~d orbit. We set out to determine the nature of the TESS planet candidate TOI 263.01 using ground-based multicolour transit photometry. The host star is faint, which makes RV confirmation challenging, but the large transit depth makes the candidate suitable for validation through multicolour photometry. Our analysis combines three transits observed simultaneously in r', i', and z_s bands using the MuSCAT2 multicolour imager, three LCOGT-observed transit light curves in g, r', and i' bands, a TESS light curve from Sector 3, and a low-resolution spectrum for stellar characterisation observed with the ALFOSC spectrograph. We model the light curves with PyTransit using a transit model that includes a physics-based light contamination component that allows us to estimate the contamination from unresolved sources from the multicolour photometry. This allows us to derive the true planet-star radius ratio marginalised over the contamination allowed by the photometry, and, combined with the stellar radius, gives us a reliable estimate of the object's absolute radius. The ground-based photometry excludes contamination from unresolved sources with a significant colour difference to TOI 263. Further, contamination from sources of same stellar type as the host is constrained to levels where the true radius ratio posterior has a median of 0.217. The median radius ratio corresponds to an absolute planet radius of 0.87 RJup, which confirms the substellar nature of the planet candidate. The object is either a giant planet or a brown dwarf (BD) located deep inside the so-called "brown dwarf desert". Both possibilities offer a challenge to current planet/BD formation models and makes 263.01 an object deserving of in-depth follow-up studies.

We study the red-optical photometry of the ultra-hot Jupiter WASP-121 b as observed by the Transiting Exoplanet Survey Satellite (TESS) and model its atmosphere through a radiative transfer simulation. Given its short orbital period of 1.275 days, inflated state and bright host star, WASP-121 b is exceptionally favorable for detailed atmospheric characterization. Towards this purpose, we use allesfitter to characterize its full red-optical phase curve, including the planetary phase modulation and the secondary eclipse. We measure the day and nightside brightness temperatures in the TESS passband as 2940+38-41 K and 2190+294-146 K, respectively, and find no phase shift between the brightest and substellar points. This is consistent with an inefficient heat recirculation on the planet. We then perform an atmospheric retrieval analysis to infer the dayside atmospheric properties of WASP-121 b such as its bulk composition, albedo and heat recirculation. We confirm the temperature inversion in the atmosphere and suggest H-, TiO and VO as potential causes of the inversion, absorbing heat at optical wavelengths at low pressures. Future HST and JWST observations of WASP-121 b will benefit from its first full phase curve measured by TESS.

We report the Transiting Exoplanet Survey Satellite (TESS) discovery of three terrestrial-sized planets transiting L 98-59 (TOI-175, TIC 307210830) -- a bright M dwarf at a distance of 10.6 pc. Using the Gaia-measured distance and broad-band photometry we find that the host star is an M3 dwarf. Combined with the TESS transits from three sectors, the corresponding stellar parameters yield planet radii ranging from 0.8REarth to 1.6REarth. All three planets have short orbital periods, ranging from 2.25 to 7.45 days with the outer pair just wide of a 2:1 period resonance. Diagnostic tests produced by the TESS Data Validation Report and the vetting package DAVE rule out common false positive sources. These analyses, along with dedicated follow-up and the multiplicity of the system, lend confidence that the observed signals are caused by planets transiting L 98-59 and are not associated with other sources in the field. The L 98-59 system is interesting for a number of reasons: the host star is bright (V = 11.7 mag, K = 7.1 mag) and the planets are prime targets for further follow-up observations including precision radial-velocity mass measurements and future transit spectroscopy with the James Webb Space Telescope; the near resonant configuration makes the system a laboratory to study planetary system dynamical evolution; and three planets of relatively similar size in the same system present an opportunity to study terrestrial planets where other variables (age, metallicity, etc.) can be held constant. L 98-59 will be observed in 4 more TESS sectors, which will provide a wealth of information on the three currently known planets and have the potential to reveal additional planets in the system.

Far-infrared astronomy has advanced rapidly since its inception in the late 1950's, driven by a maturing technology base and an expanding community of researchers. This advancement has shown that observations at far-infrared wavelengths are important in nearly all areas of astrophysics, from the search for habitable planets and the origin of life, to the earliest stages of galaxy assembly in the first few hundred million years of cosmic history. The combination of a still developing portfolio of technologies, particularly in the field of detectors, and a widening ensemble of platforms within which these technologies can be deployed, means that far-infrared astronomy holds the potential for paradigm-shifting advances over the next decade. In this review, we examine current and future far-infrared observing platforms, including ground-based, sub-orbital, and space-based facilities, and discuss the technology development pathways that will enable and enhance these platforms to best address the challenges facing far-infrared astronomy in the 21st century.

The quest for other habitable worlds and the search for life among them are major goals of modern astronomy. One way to make progress towards these goals is to obtain high-quality spectra of a large number of exoplanets over a broad range of wavelengths. While concepts currently investigated in the United States are focused on visible/NIR wavelengths, where the planets are probed in reflected light, a compelling alternative to characterize planetary atmospheres is the mid-infrared waveband (5-20~$\mu$m). Indeed, mid-infrared observations provide key information on the presence of an atmosphere, the surface conditions (e.g., temperature, pressure, habitability), and the atmospheric composition in important species such as H$_2$O, CO$_2$, O$_3$, CH$_4$, and N$_2$O. This information is essential to investigate the potential habitability of exoplanets and to make progress towards the search for life in the universe. Obtaining high-quality mid-infrared spectra of exoplanets from the ground is however extremely challenging due to the overwhelming brightness and turbulence of Earth's atmosphere. In this paper, we present a concept of space-based mid-infrared interferometer that can tackle this observing challenge and discuss the main technological developments required to launch such a sophisticated instrument.

The Planet Formation Imager (PFI, www.planetformationimager.org) is a next-generation infrared interferometer array with the primary goal of imaging the active phases of planet formation in nearby star forming regions. PFI will be sensitive to warm dust emission using mid-infrared capabilities made possible by precise fringe tracking in the near-infrared. An L/M band combiner will be especially sensitive to thermal emission from young exoplanets (and their disks) with a high spectral resolution mode to probe the kinematics of CO and H2O gas. In this paper, we give an overview of the main science goals of PFI, define a baseline PFI architecture that can achieve those goals, point at remaining technical challenges, and suggest activities today that will help make the Planet Formation Imager facility a reality.

This whitepaper discusses the diversity of exoplanets that could be detected by future observations, so that comparative exoplanetology can be performed in the upcoming era of large space-based flagship missions. The primary focus will be on characterizing Earth-like worlds around Sun-like stars. However, we will also be able to characterize companion planets in the system simultaneously. This will not only provide a contextual picture with regards to our Solar system, but also presents a unique opportunity to observe size dependent planetary atmospheres at different orbital distances. We propose a preliminary scheme based on chemical behavior of gases and condensates in a planet's atmosphere that classifies them with respect to planetary radius and incident stellar flux.

Inspired by the recent Kepler discoveries of circumbinary planets orbiting nine close binary stars, we explore the fate of the former as the latter evolve off the main sequence. We combine binary star evolution models with dynamical simulations to study the orbital evolution of these planets as their hosts undergo common-envelope stages, losing in the process a tremendous amount of mass on dynamical timescales. Five of the systems experience at least one Roche-lobe overflow and common-envelope stages (Kepler-1647 experiences three), and the binary stars either shrink to very short orbits or coalesce; two systems trigger a double-degenerate supernova explosion. Kepler's circumbinary planets predominantly remain gravitationally bound at the end of the common-envelope phase, migrate to larger orbits, and may gain significant eccentricity; their orbital expansion can be more than an order of magnitude and can occur over the course of a single planetary orbit. The orbits these planets can reach are qualitatively consistent with those of the currently known post-common-envelope, eclipse-time variations circumbinary candidates. Our results also show that circumbinary planets can experience both modes of orbital expansion (adiabatic and non-adiabatic) if their host binaries undergo more than one common-envelope stage; multiplanet circumbinary systems like Kepler-47 can experience both modes during the same common-envelope stage. Additionally, unlike Mercury orbiting the Sun, a circumbinary planet with the same semi-major axis can survive the common envelope evolution of a close binary star with a total mass of 1 MSun.

The Planet Formation Imager (PFI) project aims to image the period of planet assembly directly, resolving structures as small as a giant planet's Hill sphere. These images will be required in order to determine the key mechanisms for planet formation at the time when processes of grain growth, protoplanet assembly, magnetic fields, disk/planet dynamical interactions and complex radiative transfer all interact - making some planetary systems habitable and others inhospitable. We will present the overall vision for the PFI concept, focusing on the key technologies and requirements that are needed to achieve the science goals. Based on these key requirements, we will define a cost envelope range for the design and highlight where the largest uncertainties lie at this conceptual stage.

This is a joint summary of the reports from the three Astrophysics Program Analysis Groups (PAGs) in response to the "Planning for the 2020 Decadal Survey" charge given by the Astrophysics Division Director Paul Hertz. This joint executive summary contains points of consensus across all three PAGs. Additional findings specific to the individual PAGs are reported separately in the individual reports. The PAGs concur that all four large mission concepts identified in the white paper as candidates for maturation prior to the 2020 Decadal Survey should be studied in detail. These include the Far-IR Surveyor, the Habitable-Exoplanet Imaging Mission, the UV/Optical/IR Surveyor, and the X-ray Surveyor. This finding is predicated upon assumptions outlined in the white paper and subsequent charge, namely that 1) major development of future large flagship missions under consideration are to follow the implementation phases of JWST and WFIRST; 2) NASA will partner with the European Space Agency on its L3 Gravitational Wave Surveyor; 3) the Inflation Probe be classified as a probe-class mission to be developed according to the 2010 Decadal Survey report. If these key assumptions were to change, this PAG finding would need to be re-evaluated. The PAGs find that there is strong community support for the second phase of this activity - maturation of the four proposed mission concepts via Science and Technology Definition Teams (STDTs). The PAGs find that there is strong consensus that all of the STDTs contain broad and interdisciplinary representation of the science community. Finally, the PAGs find that there is community support for a line of Probe-class missions within the Astrophysics mission portfolio (condensed).

Double-Fourier interferometry is the most viable path to sub-arcsecond spatial resolution for future astronomical instruments that will observe the universe at far-infrared wavelengths. The double transform spatio-spectral interferometry couples pupil plane beam combination with detector arrays to enable imaging spectroscopy of wide fields, that will be key to accomplishing top-level science goals. The wide field of view and the necessity for these instruments to fly above the opaque atmosphere create unique characteristics and requirements compared to instruments on ground-based telescopes. In this paper, we discuss some characteristics of single-baseline spatio-spectral interferometers. We investigate the impact of intensity and optical path difference noise on the interferogram and the spectral signal-to-noise ratio. We apply our findings to the special case of the Balloon Experimental Twin Telescope for Infrared Interferometry (BETTII), a balloon payload that will be a first application of this technique at far-infrared wavelengths on a flying platform.

The Transiting Exoplanet Survey Satellite (TESS) will search for planets transiting bright and nearby stars. TESS has been selected by NASA for launch in 2017 as an Astrophysics Explorer mission. The spacecraft will be placed into a highly elliptical 13.7-day orbit around the Earth. During its two-year mission, TESS will employ four wide-field optical CCD cameras to monitor at least 200,000 main-sequence dwarf stars with I = 4-13 for temporary drops in brightness caused by planetary transits. Each star will be observed for an interval ranging from one month to one year, depending mainly on the star's ecliptic latitude. The longest observing intervals will be for stars near the ecliptic poles, which are the optimal locations for follow-up observations with the James Webb Space Telescope. Brightness measurements of preselected target stars will be recorded every 2 min, and full frame images will be recorded every 30 min. TESS stars will be 10-100 times brighter than those surveyed by the pioneering Kepler mission. This will make TESS planets easier to characterize with follow-up observations. TESS is expected to find more than a thousand planets smaller than Neptune, including dozens that are comparable in size to the Earth. Public data releases will occur every four months, inviting immediate community-wide efforts to study the new planets. The TESS legacy will be a catalog of the nearest and brightest stars hosting transiting planets, which will endure as highly favorable targets for detailed investigations.

A compact cryogenic calibration target is presented that has a peak diffuse reflectance, $R \le 0.003$, from $800-4,800\,{\rm cm}^{-1}$ $(12-2\,\mu$m). Upon expanding the spectral range under consideration to $400-10,000\,{\rm cm}^{-1}$ $(25-1\,\mu$m) the observed performance gracefully degrades to $R \le 0.02$ at the band edges. In the implementation described, a high-thermal-conductivity metallic substrate is textured with a pyramidal tiling and subsequently coated with a thin lossy dielectric coating that enables high absorption and thermal uniformity across the target. The resulting target assembly is lightweight, has a low-geometric profile, and has survived repeated thermal cycling from room temperature to $\sim4\,$K. Basic design considerations, governing equations, and test data for realizing the structure described are provided. The optical properties of selected absorptive materials -- Acktar Fractal Black, Aeroglaze Z306, and Stycast 2850 FT epoxy loaded with stainless steel powder -- are characterized and presented.

The Optical Properties of Astronomical Silicates with Infrared Techniques (OPASI-T) program utilizes multiple instruments to provide spectral data over a wide range of temperature and wavelengths. Experimental methods include Vector Network Analyzer (VNA) and Fourier Transform Spectroscopy (FTS) transmission, and reflection/scattering measurements. From this data, we can determine the optical parameters for the index of refraction, \textit{n}, and the absorption coefficient, \textit{k}. The analysis of the laboratory transmittance data for each sample type is based upon different mathematical models, which are applied to each data set according to their degree of coherence. Presented here are results from iron silicate dust grain analogs, in several sample preparations and at temperatures ranging from 5--300 K, across the infrared and millimeter portion of the spectrum (from 2.5--10,000 \mic\ or 4,000--1 \wvn).

We present a new and innovative near-infrared multi-band ultraprecise spectroimager (NIMBUS) for SOFIA. This design is capable of characterizing a large sample of extrasolar planet atmospheres by measuring elemental and molecular abundances during primary transit and occultation. This wide-field spectroimager would also provide new insights into Trans-Neptunian Objects (TNO), Solar System occultations, brown dwarf atmospheres, carbon chemistry in globular clusters, chemical gradients in nearby galaxies, and galaxy photometric redshifts. NIMBUS would be the premier ultraprecise spectroimager by taking advantage of the SOFIA observatory and state of the art infrared technologies. This optical design splits the beam into eight separate spectral bandpasses, centered around key molecular bands from 1 to 4 microns. Each spectral channel has a wide field of view for simultaneous observations of a reference star that can decorrelate time-variable atmospheric and optical assembly effects, allowing the instrument to achieve ultraprecise calibration for imaging and photometry for a wide variety of astrophysical sources. NIMBUS produces the same data products as a low-resolution integral field spectrograph over a large spectral bandpass, but this design obviates many of the problems that preclude high-precision measurements with traditional slit and integral field spectrographs. This instrument concept is currently not funded for development.

The Fourier-Kelvin Stellar Interferometer (FKSI) is a mission concept for a nulling interferometer for the near-to-mid-infrared spectral region. FKSI is conceived as a mid-sized strategic or Probe class mission. FKSI has been endorsed by the Exoplanet Community Forum 2008 as such a mission and has been costed to be within the expected budget. The current design of FKSI is a two-element nulling interferometer. The two telescopes, separated by 12.5 m, are precisely pointed (by small steering mirrors) on the target star. The two path lengths are accurately controlled to be the same to within a few nanometers. A phase shifter/beam combiner (Mach-Zehnder interferometer) produces an output beam consisting of the nulled sum of the target planet's light and the host star's light. When properly oriented, the starlight is nulled by a factor of 10^-4, and the planet light is undiminished. Accurate modeling of the signal is used to subtract the residual starlight, permitting the detection of planets much fainter than the host star. The current version of FKSI with 0.5-m apertures and waveband 3-8 microns has the following main capabilities: (1) detect exozodiacal emission levels to that of our own solar system (1 Solar System Zodi) around nearby F, G, and K, stars; (2) characterize spectroscopically the atmospheres of a large number of known non-transiting planets; (3) survey and characterize nearby stars for planets down to 2 Earth radii from just inside the habitable zone and inward. An enhanced version of FKSI with 1-m apertures separated by 20 m and cooled to 40 K, with science waveband 5-15 microns, allows for the detection and characterization of 2 Earth-radius super-Earths and smaller planets in the habitable zone around stars within about 30 pc.

Explorers have made breakthroughs in many fields of astrophysics. The science from both these missions contributed to three Nobel Prizes - Giacconi (2002), Mather, and Smoot (2006). Explorers have: marked the definitive beginning of precision cosmology, discovered that short gamma-ray bursts are caused by compact star mergers and have measured metalicity to redshifts z>6. NASA Explorers do cutting-edge science that cannot be done by facility-class instruments. The Explorer program provides a rapid response to changing science and technology, to enable cutting-edge science at moderate cost. Explorers also enable innovation, and engage & train scientists, managers and engineers, adding human capital to NASA and the nation. The astrophysics Explorer launch rate now being achieved is 1 per 3 years, and budget projections are in the $150M/year range for the next five years. A newly Vigorous Explorer Program should be created to: 1. Reach the long-stated goal of annual astrophysics launches; 2. Find additional launch options for Explorers and actively encourage cost savings in launchers and spacecraft, such as new commercial vehicles and innovative partnerships. 3. Mitigate risk via stronger technical development and sub-orbital programs, and through longer, more thorough, Phase A programs, potentially reducing the need for a 30% contingency; 4. Strive to protect the funding for missions that have reached Phase B, to prevent significant launch slips and cancellations, with a goal of 4 to 5 years from Phase B to launch; 5. Review the project management procedures and requirements to seek cost reductions, including the risk management strategy and the review and reporting process; 6. Review and possibly modify the cost caps for all Explorer classes to optimize scientific returns per dollar. [ABRIDGED]

Over 300 extrasolar planets (exoplanets) have been detected orbiting nearby stars. We now hope to conduct a census of all planets around nearby stars and to characterize their atmospheres and surfaces with spectroscopy. Rocky planets within their star's habitable zones have the highest priority, as these have the potential to harbor life. Our science goal is to find and characterize all nearby exoplanets; this requires that we measure the mass, orbit, and spectroscopic signature of each one at visible and infrared wavelengths. The techniques for doing this are at hand today. Within the decade we could answer long-standing questions about the evolution and nature of other planetary systems, and we could search for clues as to whether life exists elsewhere in our galactic neighborhood.

During the last few years, considerable effort has been directed towards large-scale (>> $1 Billion US) missions to detect and characterize earth-like planets around nearby stars, such as the Terrestrial Planet Finder Interferometer (TPF-I) and Darwin missions. However, technological and budgetary issues as well as shifting science priorities will likely prevent these missions from entering Phase A until the next decade. The secondary eclipse technique using the Spitzer Space Telescope has been used to directly measure the temperature and emission spectrum of extrasolar planets. However, only a small fraction of known extrasolar planets are in transiting orbits. Thus, a simplified nulling interferometer, which produces an artificial eclipse or occultation, and operates in the near- to mid-infrared (e.g. ~ 3 to 8 or 10 microns), can characterize the atmospheres of this much larger sample of the known but non-transiting exoplanets. Many other scientific problems can be addressed with a system like this, including imaging debris disks, active galactic nuclei, and low mass companions around nearby stars. We discuss the rationale for a probe-scale mission in the $600-800 Million range, which we name here as the Small Prototype Planet Finding Interferometer (SPPFI).

By providing sensitive sub-arcsecond images and integral field spectroscopy in the 25 - 400 micron wavelength range, a far-IR interferometer will revolutionize our understanding of planetary system formation, reveal otherwise-undetectable planets through the disk perturbations they induce, and spectroscopically probe the atmospheres of extrasolar giant planets in orbits typical of most of the planets in our solar system. The technical challenges associated with interferometry in the far-IR are greatly relaxed relative to those encountered at shorter wavelengths or when starlight nulling is required. A structurally connected far-IR interferometer with a maximum baseline length of 36 m can resolve the interesting spatial structures in nascent and developed exoplanetary systems and measure exozodiacal emission at a sensitivity level critical to TPF-I mission planning. The Space Infrared Interferometric Telescope was recommended in the Community Plan for Far-IR/Submillimeter Space Astronomy, studied as a Probe-class mission, and estimated to cost 800M dollars. The scientific communities in Europe, Japan, and Canada have also demonstrated a keen interest in far-IR interferometry through mission planning workshops and technology research, suggesting the possibility of an international collaborative effort.

We report results of a recently-completed pre-Formulation Phase study of SPIRIT, a candidate NASA Origins Probe mission. SPIRIT is a spatial and spectral interferometer with an operating wavelength range 25 - 400 microns. SPIRIT will provide sub-arcsecond resolution images and spectra with resolution R = 3000 in a 1 arcmin field of view to accomplish three primary scientific objectives: (1) Learn how planetary systems form from protostellar disks, and how they acquire their inhomogeneous composition; (2) characterize the family of extrasolar planetary systems by imaging the structure in debris disks to understand how and where planets of different types form; and (3) learn how high-redshift galaxies formed and merged to form the present-day population of galaxies. Observations with SPIRIT will be complementary to those of the James Webb Space Telescope and the ground-based Atacama Large Millimeter Array. All three observatories could be operational contemporaneously.

We present observations that were carried out with the Two HUndred Micron PhotometER (THUMPER) mounted on the James Clerk Maxwell Telescope (JCMT) in Hawaii, at a wavelength of 200 um (frequency 1.5 THz). The observations utilise a small atmospheric window that opens up at this wavelength under very dry conditions at high-altitude observing sites. The atmosphere was calibrated using the sky-dipping method and a relation was established between the optical depth, tau, at 1.5 THz and that at 225 GHz: tau_1.5THz = (95 +/- 10)*tau_225GHz. Mars and Jupiter were mapped from the ground at this wavelength for the first time, and the system characteristics measured. A noise equivalent flux density (NEFD) of ~65 +/- 10 Jy (1 sigma 1 second) was measured for the THUMPER-JCMT combination, consistent with predictions based upon our laboratory measurements. The main-beam resolution of 14 arcsec was confirmed and an extended error-beam detected at roughly two-thirds of the magnitude of the main beam. Measurements of the Sun allow us to estimate that the fraction of the power in the main beam is ~15%, consistent with predictions based on modelling the dish surface accuracy. It is therefore shown that the sky over Mauna Kea is suitable for astronomy at this wavelength under the best conditions. However, higher or drier sites should have a larger number of useable nights per year.

The Wide-Field Imaging Interferometry Testbed (WIIT) will provide valuable information for the development of space-based interferometers. This laboratory instrument operates at optical wavelengths and provides the ability to test operational algorithms and techniques for data reduction of interferometric data. Here we present some details of the system design and implementation, discuss the overall performance of the system to date, and present our plans for future development of WIIT. In order to make best use of the interferometric data obtained with this system, it is critical to limit uncertainties within the system and to accurately understand possible sources of error. The WIIT design addresses these criteria through a number of ancillary systems. The use of redundant metrology systems is one of the most important features of WIIT, and provides knowledge of the delay line position to better than 10 nm. A light power detector is used to monitor the brightness of our light sources to ensure that small fluctuations in brightness do not affect overall performance. We have placed temperature sensors on critical components of the instrument, and on the optical table, in order to assess environmental effects on the system. The use of these systems provides us with estimates of the overall system uncertainty, and allows an overall characterization of the results to date. These estimates allow us to proceed forward with WIIT, adding rotation stages for 2-D interferometry. In addition, they suggest possible avenues for system improvement. Funding for WIIT is provided by NASA Headquarters through the ROSS/SARA Program and by the Goddard Space Flight Center through the IR&D Program.

In order for data products from WIIT to be as robust as possible, the alignment and mechanical positions of source, receiver, and detector components must be controlled and measured with extreme precision and accuracy, and the ambient environment must be monitored to allow environmental effects to be correlated with even small perturbations to fringe data. Relevant detailed anatomy of many testbed components and assemblies are described. The system of displacement measuring interferometers (DMI), optical encoders, optical alignment tools, optical power monitors, and temperature sensors implemented for control and monitoring of the testbed is presented.

To understand the cosmic history of element synthesis it will be important to obtain extinction-free measures of the heavy element contents of high-redshift objects and to chart two monumental events: the collapse of the first metal-free clouds to form stars, and the initial seeding of the universe with dust. The information needed to achieve these objectives is uniquely available in the far-infrared/submillimeter (FIR/SMM) spectral region. Following the Decadal Report and anticipating the development of the Single Aperture Far-IR (SAFIR) telescope and FIR/SMM interferometry, we estimate the measurement capabilities of a large-aperture, background-limited FIR/SMM observatory and an interferometer on a boom, and discuss how such instruments could be used to measure the element synthesis history of the universe.

The Wide-field Imaging Interferometry Testbed (WIIT) was designed to validate, experiment with, and refine the technique of wide field mosaic imaging for optical/IR interferometers. Here we offer motivation for WIIT, present the testbed design, and describe algorithms that can be used to reduce the data from a spatial and spectral Michelson interferometer. A conventional single-detector Michelson interferometer operating with narrow bandwidth at center wavelength lambda is limited in its field of view to the primary beam of the individual telescope apertures, or ~lambda/d radians, where d is the telescope diameter. Such a field is too small for many applications; often one wishes to image extended sources. We are developing and testing techniques analogous to the mosaicing method employed in millimeter and radio astronomy, but applicable to optical/IR Michelson interferometers, in which beam combination is done in the pupil plane. An Npix x Npix array detector placed in the image plane of the interferometer is used to record simultaneously the fringe patterns from many contiguous telescope fields, effectively multiplying the field size by Npix/2, where the factor 2 allows for Nyquist sampling. This technique will be especially valuable for interferometric space observatories, such as the Space Infrared Interferometric Telescope (SPIRIT) and the Submillimeter Probe of the Evolution of Cosmic Structure (SPECS). SPIRIT and SPECS will be designed to provide sensitive, high angular resolution, far-IR/submillimeter observations of fields several arcminutes in diameter, and views of the universe complementary to those provided by the Hubble Space Telescope (HST), the Next-Generation Space Telescope (NGST), and the Atacama Large Millimeter Array (ALMA).

The question "How did we get here and what will the future bring?" captures the human imagination and the attention of the National Academy of Science's Astronomy and Astrophysics Survey Commitee (AASC). Fulfillment of this "fundamental goal" requires astronomers to have sensitive, high angular and spectral resolution observations in the far-infrared/submillimeter (far-IR/sub-mm) spectral region. With half the luminosity of the universe and vital information about galaxy, star and planet formation, observations in this spectral region require capabilities similar to those currently available or planned at shorter wavelengths. In this paper we summarize the scientific motivation, some mission concepts and technology requirements for far-IR/sub-mm space interferometers that can be developed in the 2010-2020 timeframe.

We present the first medium-resolution ($R\sim 600$) mid-infrared (8-13.3\micron) spectra of 11 Be stars. A large number of lines are observed and identified in these spectra, including, as an example, 39 hydrogen recombination lines in the spectrum of $\gamma$ Cas. In the majority of our spectra, all of the observed lines are attributable to hydrogen recombination. Two of the sources, $\beta$ Lyr and MWC 349 also show emission from other species. Both of these objects show evidence of [Ne II] emission, and $\beta$ Lyr also shows evidence of He I emission. We tabulate the effective line strength and line widths for the observed lines, and briefly discuss the physical implications of the observed line series. We also use a simple model of free-free emission to characterize the disks around these sources.

We have imaged the M2Iab supergiant star Alpha Ori at 11.7 micron and 17.9 micron using the Hale 5-m telescope and an array camera with sub-arcsecond angular resolution. Our images reveal the circumstellar dust shell extending out to approximately 5" from the star. By fitting two multi-parameter models to the data, we find values for the dust shell inner radius, the temperature at this radius, the percentage flux produced by the circumstellar material at each of our wavelengths, and the radial dependence of the dust mass density. We present profiles of the mean surface brightness as a function of radius and the power detected from within annular rings as a function of radius.