Satellite Laser Ranging (SLR) is an established technology used for geodesy, fundamental science and precise orbit determination. This paper reports on the first successful SLR measurement from the German Aerospace Center research observatory in Stuttgart. While many SLR stations are in operation, the experiment described here is unique in several ways: The modular system has been assembled completely from commercial off-the-shelf components, which increases flexibility and significantly reduces hardware costs. To our knowledge it has been the first time that an SLR measurement has been conducted using an optical fibre rather than a coud\'e path to direct the light from the laser source onto the telescope. The transmitter operates at an output power of about 75 mW and a repetition rate of 3 kHz, and at a wavelength of 1064 nm. Due to its rather small diameter of only 80 {\mu}{\mu}m, the receiver detector features a low noise rate of less than 2 kHz and can be operated without gating in many cases. With this set-up, clear return signals have been received from several orbital objects equipped with retroreflectors. In its current configuration, the system does not yet achieve the same performance as other SLR systems in terms of precision, maximum distance and the capability of daylight ranging; however, plans to overcome these limitations are outlined.

In order to avoid collisions with space debris, the near Earth orbit must be continuously scanned by either ground- or spaced-based facilities. For the low Earth orbit, radar telescopes are the workhorse for this task, especially due to their continuous availability. However, optical observation methods can deliver complementary information, especially towards high accuracy measurements. Passive-optical observations are inexpensive and can yield very precise information about the apparent position of the object in the sky via comparison with background stars. However, the object's distance from the observer is not readily accessible, which constitutes a major drawback of this approach for the precise calculation of the orbital elements. Two experimental methods have been devised to overcome this problem: Using two observatories a few kilometres apart, strictly simultaneous observations of the same object yield an accurate, instantaneous 3D position determination through measurement of the parallax. If only one observatory is available, a pulsed laser can be used in addition to the passive-optical channel to measure the distance to the object, in a similar fashion as used by the satellite laser ranging community. However, compared to conventional laser ranging, a stronger laser and more elaborate tracking algorithms are necessary. The two approaches can also be combined by illuminating the object with a pulsed laser from one observatory and measuring the return times at both observatories. These techniques are explored by German Aerospace Center in Stuttgart using its orbital debris research observatory, in cooperation with the Satellite Laser Ranging station in Graz and the Geodetic Observatory in Wettzell. This contribution will present some of the results and plans for further measurement campaigns.