MICADO is the Multi-AO Imaging Camera for Deep Observations, and it will be one of the first light instruments of the Extremely Large Telescope (ELT). Doing high precision multi-object differential astrometry behind ELT is particularly effective given the increased flux and small diffraction limit. Thanks to its robust design with fixed mirrors and a cryogenic environment, MICADO aims to provide 50 $\mu$as absolute differential astrometry (measure star-to-star distances in absolute $\mu$as units) over a 53" FoV in the range 1.2-2.5 $\mu$m. Tackling high precision astrometry over large FoV requires Multi Conjugate Adaptive Optics (MCAO) and an accurate distortion calibration. The MICADO control scheme relies on the separate calibration of the ELT, MAORY and MICADO systematics and distortions, to ensure the best disentanglement and correction of all the contributions. From a system perspective, we are developing an astrometric error budget supported by optical simulations to assess the impact of the main astrometric errors induced by the telescope and its optical tolerances, the MCAO distortions and the opto-mechanical errors between internal optics of ELT, MAORY and MICADO. The development of an overall astrometric error budget will pave the road to an efficient calibration strategy complementing the design of the MICADO calibration unit. At the focus of this work are a number of opto-mechanical error terms which have particular relevance for MICADO astrometry applications, and interface to the MCAO design.

We report on our ongoing efforts to ensure that the MICADO NIR imager reaches differential absolute (often abbreviated: relative) astrometric performance limited by the SNR of typical observations. The exceptional 39m diameter collecting area in combination with a powerful multi-conjugate adaptive optics system (called MAORY) brings the nominal centroiding error, which scales as FWHM/SNR, down to a few 10 uas. Here we show that an exceptional effort is needed to provide a system which delivers adequate and calibrateable astrometric performance over the full field of view (up to 53 arcsec diameter).

The paper discusses an assessment study about the impact of the distortions on the astrometric observations with the Extremely Large Telescope originated from the optics positioning errors and telescope instabilities. Optical simulations combined with Monte Carlo approach reproducing typical inferred opto-mechanical and dynamical instabilities, show RMS distortions between $\sim$ 0.1-5 mas over 1 arcmin field of view. Over minutes timescales the plate scale variations from ELT-M2 caused by wind disturbances and gravity flexures and the field rotation from ELT-M4-M5 induce distortions and PSF jitter at the edge of 1 arcmin FoV (radius 35 arcsec) up to $\sim$ 5 mas comparable to the diffraction-limited PSF size $FWHM_H = 8.5$ mas. The RMS distortions inherent to the ELT design are confined to the 1$^{st}$-3$^{rd}$ order and reduce to an astrometric RMS residual post fit of $\sim$ 10-20 $\mu as$ for higher order terms. In this paper, we study which calibration effort has to be undertaken to reach an astrometric stability close to this level of higher order residuals. The amplitude and timescales of the assumed telescope tolerances indicate the need for frequent on-sky calibrations and MCAO stabilization of the plate scale to enable astrometric observations with ELT at the level of $\leq 50 \mu as$, which is one of the core science missions for the ELT / MICADO instrument.