The portable adaptive optics (PAO) is a high-contrast instrument that is optimized for the direct imaging of exoplanets and sub-stellar companions. The PAO has a compact physical size, high flexibility and high performance. As a visiting instrument, PAO has been used for the imaging observation of exoplanets with current 3-4 meter class telescopes. In these observations, it has delivered a diffraction limited image in H band. Combined with our unique image rotation and subtraction (IRS) technique and the optimized IRS algorithm, our PAO has successfully recovered the known exoplanets of kappa And b, in recent observation at 3.5-meter ARC telescope at Apache Point Observatory. The observation contrast has reached 10E-5 at an angular distance of 1 arcsec. We have performed the associated astrometry and photometry analysis of the recovered kappa And b planet, which gives a project separation of 1.044 +/- 0.016 arcsec, a position angle of 53.5 +/- 0.5 degrees, and a mass of 10.15 (-1.255) (+2.19) MJup. It has fully demonstrated that our portable high-contrast imaging system can be used for the exoplanets direct imaging observation with middle-class telescopes.

The optical vortex coronagraph (OVC) is one of the promising ways for direct imaging exoplanets because of its small inner working angle and high throughput. This paper presents the design and laboratory demonstration performance at 633nm and 1520nm of the OVC based on liquid crystal polymers (LCP). Two LCPs has been manufactured in partnership with a commercial vendor. The OVC can deliver a good performance in laboratory test and achieve the contrast of the order 10^-6 at angular distance 3{\lambda}/D, which is able to image the giant exoplanets at a young stage in combination with extreme adaptive optics.

Direct imaging of exoplanets by reflected starlight is extremely challenging due to the large luminosity ratio to the primary star. Wave-front control is a critical technique to attenuate the speckle noise in order to achieve an extremely high contrast. We present a phase quantization study of a spatial light modulator for wave front control to meet the contrast requirement of detection of a terrestrial planet in the habitable zone of a solar-type star. We perform the numerical simulation by employing the SLM with different phase accuracy and actuator numbers, which are related to the achievable contrast. We use an optimization algorithm to solve the quantization problems that is matched to the controllable phase step of the SLM. Two optical configurations are discussed with the SLM located before and after the coronagraph focal plane mask. The simulation result has constrained the specification for SLM phase accuracy in the above two optical configurations. Finally, we have demonstrated that a SLM with more actuators can deliver a competitive contrast performance to that by using a deformable mirror.

High-contrast imaging provided by a coronagraph is critical for the direction imaging of the Earth-like planet orbiting its bright parent star. A major limitation for such direct imaging is the speckle noise that is induced from the wave-front error of an optical system. We derive an algorithm for the wave-front measurement directly from 3 focal plane images. The 3 images are achieved through a deformable mirror to provide specific phases for the optics system. We introduce an extra amplitude modulation on one deformable mirror configuration to create an uncorrelated wave-front, which is a critical procedure for wave-front sensing. The simulation shows that the reconstructed wave-front is consistent with the original wave-front theoretically, which indicates that such an algorithm is a promising technique for the wave-front measurement for the high-contrast imaging.

We propose a transmission-filter coronagraph for direct imaging of Jupiter-like exoplanets with ground-based telescopes. The coronagraph is based on a transmission filter that consists of finite number of transmission steps. A discrete optimization algorithm is proposed for the design of the transmission filter that is optimized for ground-based telescopes with central obstructions and spider structures.We discussed the algorithm that is applied for our coronagraph design. To demonstrate the performance of the coronagraph, a filter was manufactured and laboratory tests were conducted. The test results show that the coronagraph can achieve a high contrast of 10 to -6.5 at an inner working angle of 5{\lambda}/D, which indicates that our coronagraph can be immediately used for the direct imaging of Jupiter-like exoplanets with ground-based telescopes.

Image Rotation and Subtraction (IRS) is a high-contrast imaging technique which can be used to suppress the speckles noise and facilitate the direct detection of exoplanets. IRS is different from Angular Differential Imaging (ADI), in which it will subtract a copy of the image with 180 degrees rotated around its PSF center, rather than the subtraction of the median of all of the PSF images. Since the planet itself will be rotated to the other side of the PSF, IRS does not suffer from planet self-subtraction. In this paper, we have introduced an optimization algorithm to IRS (OIRS), which can provide an extra contrast gain at small angular separations. The performance of OIRS has been demonstrated with ADI data. We then made a comparison of the signal to noise ratio (S/N) achieved by algorithms of locally optimized combination of images (LOCI) and OIRS. Finally we found that OIRS algorithm can deliver a better S/N for small angular separations.

The high-contrast coronagraph for direct imaging earth-like exoplanet at the visible needs a contrast of 10^(-10) at a small angular separation of 4 lambda/D or less. Here we report our recent laboratory experiment that is close to the limits. The test of the high-contrast imaging coronagraph is based on our step-transmission apodized filter. To achieve the goal, we use a liquid crystal array (LCA) as a phase corrector to create a dark hole based on our dedicated focal dark algorithm. We have suppressed the diffracted and speckle noise near the star point image to a level of 1.68 x 10^(-9) at 4 lambda/D, which can be immediately used for the direct imaging of Jupiter like exoplanets. This demonstrates that high-contrast coronagraph telescope in space has the potentiality to detect and characterize earth-like planets.

An adaptive optics (AO) system based on stochastic parallel gradient descent (SPGD) algorithm is proposed to reduce the speckle noises in the optical system of stellar coronagraph in order to further improve the contrast. The principle of SPGD algorithm is described briefly and a metric suitable for point source imaging optimization is given. The feasibility and good performance of SPGD algorithm is demonstrated by experimental system featured with a 140-actuators deformable mirror (DM) and a Hartmann- Shark wavefront sensor. Then the SPGD based AO is applied to a liquid crystal array (LCA) based coronagraph. The LCA can modulate the incoming light to generate a pupil apodization mask in any pattern. A circular stepped pattern is used in our preliminary experiment and the image contrast shows improvement from 10^-3 to 10^-4.5 at angular distance of 2{\lambda}/D after corrected by SPGD based AO.

Wave-front sensing from focal plane multiple images is a promising technique for high-contrast imaging systems. However, the wave-front error of an optics system can be properly reconstructed only when it is very small. This paper presents an iterative optimization algorithm for the measurement of large static wave-front errors directly from only one focal plane image. We firstly measure the intensity of the pupil image to get the pupil function of the system and acquire the aberrated image on the focal plane with a phase error that is to be measured. Then we induce a dynamic phase to the tested pupil function and calculate the associated intensity of the reconstructed image on the focal plane. The algorithm is to minimize the intensity difference between the reconstructed image and the tested aberrated image on the focal plane, where the induced phase is as the variable of the optimization algorithm. The simulation shows that the wave-front of an optics system can be theoretically reconstructed with a high precision, which indicates that such an iterative algorithm may be an effective way for the wave-front sensing for high-contrast imaging systems.

We propose a high-contrast coronagraph for direct imaging of young Jupiter-like planets orbiting nearby bright stars. The coronagraph employs a step-transmission filter in which the intensity is apodized with a finite number of steps of identical transmission in each step. It should be installed on a large ground-based telescope equipped with state-of-the-art adaptive optics systems. In that case, contrast ratios around 10^-6 should be accessible within 0.1 arc seconds of the central star. In recent progress, a coronagraph with circular apodizing filter has been developing, which can be used for a ground-based telescope with central obstruction and spider structure. It is shown that ground-based direct imaging of Jupiter-like planets is promising with current technology.

By using H$\alpha$, He I 10830, EUV and soft X-ray (SXR) data, we examined a filament eruption that occurred on a quiet-sun region near the center of the solar disk on 2006 January 12, which disturbed a sigmoid overlying the filament channel observed by the $\emph{GOES-12}$ SXR Imager (SXI), and led to the eruption of the sigmoid. The event was associated with a partial halo coronal mass ejection (CME) observed by the Large Angle and Spectrometric Coronagraphs (LASCO) on board the Solar and Heliospheric Observatory ($\emph{SOHO}$), and resulted in the formation of two flare-like ribbons, post-eruption coronal loops, and two transient coronal holes (TCHs), but there were no significantly recorded $\emph{GOES}$ or H$\alpha$ flares corresponding to the eruption. The two TCHs were dominated by opposite magnetic polarities and were located on the two ends of the eruptive sigmoid. They showed similar locations and shapes in He I 10830, EUV and SXR observations. During the early eruption phase, brightenings first appeared on the locations of the two subsequent TCHs, which could be clearly identified on He I 10830, EUV and SXR images. This eruption event could be explained by the magnetic flux rope model, and the two TCHs were likely to be the feet of the flux rope.